1 | IANA-MAU-MIB DEFINITIONS ::= BEGIN
|
---|
2 |
|
---|
3 | IMPORTS
|
---|
4 | MODULE-IDENTITY, OBJECT-IDENTITY, mib-2
|
---|
5 | FROM SNMPv2-SMI
|
---|
6 | TEXTUAL-CONVENTION
|
---|
7 | FROM SNMPv2-TC
|
---|
8 | ;
|
---|
9 |
|
---|
10 | ianaMauMIB MODULE-IDENTITY
|
---|
11 | LAST-UPDATED "200704210000Z" -- April 21, 2007
|
---|
12 | ORGANIZATION "IANA"
|
---|
13 | CONTACT-INFO " Internet Assigned Numbers Authority
|
---|
14 |
|
---|
15 | Postal: ICANN
|
---|
16 | 4676 Admiralty Way, Suite 330
|
---|
17 | Marina del Rey, CA 90292
|
---|
18 |
|
---|
19 | Tel: +1-310-823-9358
|
---|
20 | EMail: iana&iana.org"
|
---|
21 |
|
---|
22 | DESCRIPTION
|
---|
23 | "This MIB module defines dot3MauType OBJECT-IDENTITIES and
|
---|
24 | IANAifMauListBits, IANAifMauMediaAvailable,
|
---|
25 | IANAifMauAutoNegCapBits, and IANAifJackType
|
---|
26 |
|
---|
27 | TEXTUAL-CONVENTIONs, specifying enumerated values of the
|
---|
28 | ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable,
|
---|
29 | ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits /
|
---|
30 | ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects
|
---|
31 | respectively, defined in the MAU-MIB.
|
---|
32 |
|
---|
33 | It is intended that each new MAU type, Media Availability
|
---|
34 | state, Auto Negotiation capability and/or Jack type defined by
|
---|
35 | the IEEE 802.3 working group and approved for publication in a
|
---|
36 | revision of IEEE Std 802.3 will be added to this MIB module,
|
---|
37 | provided that it is suitable for being managed by the base
|
---|
38 | objects in the MAU-MIB. An Expert Review, as defined in
|
---|
39 | RFC 2434 [RFC2434], is REQUIRED for such additions.
|
---|
40 |
|
---|
41 | The following reference is used throughout this MIB module:
|
---|
42 |
|
---|
43 | [IEEE802.3] refers to:
|
---|
44 | IEEE Std 802.3, 2005 Edition: 'IEEE Standard for
|
---|
45 | Information technology - Telecommunications and information
|
---|
46 | exchange between systems - Local and metropolitan area
|
---|
47 | networks - Specific requirements -
|
---|
48 | Part 3: Carrier sense multiple access with collision
|
---|
49 | detection (CSMA/CD) access method and physical layer
|
---|
50 | specifications'.
|
---|
51 |
|
---|
52 | This reference should be updated as appropriate when new
|
---|
53 | MAU types, Media Availability states, Auto Negotiation
|
---|
54 | capabilities, and/or Jack types are added to this MIB module.
|
---|
55 |
|
---|
56 | Copyright (C) The IETF Trust (2007).
|
---|
57 | The initial version of this MIB module was published in
|
---|
58 | RFC 4836; for full legal notices see the RFC itself.
|
---|
59 | Supplementary information may be available at:
|
---|
60 | http://www.ietf.org/copyrights/ianamib.html"
|
---|
61 |
|
---|
62 | REVISION "200704210000Z" -- April 21, 2007
|
---|
63 | DESCRIPTION "Initial version of this MIB as published in
|
---|
64 | RFC 4836."
|
---|
65 | ::= { mib-2 154 }
|
---|
66 |
|
---|
67 | -- Textual Conventions
|
---|
68 |
|
---|
69 | IANAifMauTypeListBits ::= TEXTUAL-CONVENTION
|
---|
70 | STATUS current
|
---|
71 | DESCRIPTION
|
---|
72 | "This data type is used as the syntax of the ifMauTypeListBits
|
---|
73 | object in the (updated) definition of MAU-MIB's ifMauTable.
|
---|
74 |
|
---|
75 | The most recent version of this textual convention is available
|
---|
76 | in the online version of this MIB module on the IANA web site.
|
---|
77 |
|
---|
78 | Requests for new values should be made to IANA via email
|
---|
79 | (iana&iana.org).
|
---|
80 |
|
---|
81 | Note that changes in this textual convention SHALL be
|
---|
82 | synchronized with relevant changes in the dot3MauType
|
---|
83 | OBJECT-IDENTITIES."
|
---|
84 | REFERENCE
|
---|
85 | "[IEEE802.3], Section 30.5.1.1.2"
|
---|
86 | SYNTAX BITS {
|
---|
87 | bOther(0), -- other or unknown
|
---|
88 | bAUI(1), -- AUI
|
---|
89 | b10base5(2), -- 10BASE-5
|
---|
90 | bFoirl(3), -- FOIRL
|
---|
91 |
|
---|
92 | b10base2(4), -- 10BASE-2
|
---|
93 | b10baseT(5), -- 10BASE-T duplex mode unknown
|
---|
94 | b10baseFP(6), -- 10BASE-FP
|
---|
95 | b10baseFB(7), -- 10BASE-FB
|
---|
96 | b10baseFL(8), -- 10BASE-FL duplex mode unknown
|
---|
97 | b10broad36(9), -- 10BROAD36
|
---|
98 | b10baseTHD(10), -- 10BASE-T half duplex mode
|
---|
99 | b10baseTFD(11), -- 10BASE-T full duplex mode
|
---|
100 | b10baseFLHD(12), -- 10BASE-FL half duplex mode
|
---|
101 | b10baseFLFD(13), -- 10BASE-FL full duplex mode
|
---|
102 | b100baseT4(14), -- 100BASE-T4
|
---|
103 | b100baseTXHD(15), -- 100BASE-TX half duplex mode
|
---|
104 | b100baseTXFD(16), -- 100BASE-TX full duplex mode
|
---|
105 | b100baseFXHD(17), -- 100BASE-FX half duplex mode
|
---|
106 | b100baseFXFD(18), -- 100BASE-FX full duplex mode
|
---|
107 | b100baseT2HD(19), -- 100BASE-T2 half duplex mode
|
---|
108 | b100baseT2FD(20), -- 100BASE-T2 full duplex mode
|
---|
109 |
|
---|
110 | b1000baseXHD(21), -- 1000BASE-X half duplex mode
|
---|
111 | b1000baseXFD(22), -- 1000BASE-X full duplex mode
|
---|
112 | b1000baseLXHD(23), -- 1000BASE-LX half duplex mode
|
---|
113 | b1000baseLXFD(24), -- 1000BASE-LX full duplex mode
|
---|
114 | b1000baseSXHD(25), -- 1000BASE-SX half duplex mode
|
---|
115 | b1000baseSXFD(26), -- 1000BASE-SX full duplex mode
|
---|
116 | b1000baseCXHD(27), -- 1000BASE-CX half duplex mode
|
---|
117 | b1000baseCXFD(28), -- 1000BASE-CX full duplex mode
|
---|
118 | b1000baseTHD(29), -- 1000BASE-T half duplex mode
|
---|
119 | b1000baseTFD(30), -- 1000BASE-T full duplex mode
|
---|
120 |
|
---|
121 | b10GbaseX(31), -- 10GBASE-X
|
---|
122 | b10GbaseLX4(32), -- 10GBASE-LX4
|
---|
123 |
|
---|
124 | b10GbaseR(33), -- 10GBASE-R
|
---|
125 | b10GbaseER(34), -- 10GBASE-ER
|
---|
126 | b10GbaseLR(35), -- 10GBASE-LR
|
---|
127 | b10GbaseSR(36), -- 10GBASE-SR
|
---|
128 | b10GbaseW(37), -- 10GBASE-W
|
---|
129 | b10GbaseEW(38), -- 10GBASE-EW
|
---|
130 | b10GbaseLW(39), -- 10GBASE-LW
|
---|
131 | b10GbaseSW(40), -- 10GBASE-SW
|
---|
132 | -- new since RFC 3636
|
---|
133 | b10GbaseCX4(41), -- 10GBASE-CX4
|
---|
134 | b2BaseTL(42), -- 2BASE-TL
|
---|
135 | b10PassTS(43), -- 10PASS-TS
|
---|
136 | b100BaseBX10D(44), -- 100BASE-BX10D
|
---|
137 | b100BaseBX10U(45), -- 100BASE-BX10U
|
---|
138 | b100BaseLX10(46), -- 100BASE-LX10
|
---|
139 | b1000BaseBX10D(47), -- 1000BASE-BX10D
|
---|
140 | b1000BaseBX10U(48), -- 1000BASE-BX10U
|
---|
141 | b1000BaseLX10(49), -- 1000BASE-LX10
|
---|
142 | b1000BasePX10D(50), -- 1000BASE-PX10D
|
---|
143 | b1000BasePX10U(51), -- 1000BASE-PX10U
|
---|
144 | b1000BasePX20D(52), -- 1000BASE-PX20D
|
---|
145 | b1000BasePX20U(53) -- 1000BASE-PX20U
|
---|
146 | }
|
---|
147 |
|
---|
148 | IANAifMauMediaAvailable ::= TEXTUAL-CONVENTION
|
---|
149 | STATUS current
|
---|
150 | DESCRIPTION
|
---|
151 | "This data type is used as the syntax of the
|
---|
152 | ifMauMediaAvailable and rpMauMediaAvailable objects in the
|
---|
153 | (updated) definition of MAU-MIB's ifMauTable and rpMauTable
|
---|
154 | respectively.
|
---|
155 |
|
---|
156 | Possible values are:
|
---|
157 | other(1) - undefined (not listed below)
|
---|
158 | unknown(2) - MAU's true state is unknown; e.g.,
|
---|
159 | during initialization
|
---|
160 | available(3) - link, light, or loopback is normal
|
---|
161 | notAvailable(4) - link loss, low light, or no loopback
|
---|
162 | remoteFault(5) - a fault has been detected at the
|
---|
163 | remote end of the link. This value
|
---|
164 | applies to 10BASE-FB, 100BASE-T4 Far
|
---|
165 | End Fault Indication and non-specified
|
---|
166 | remote faults from a system running
|
---|
167 | auto-negotiation
|
---|
168 | invalidSignal(6) - invalid signal has been received from
|
---|
169 | the other end of the link, 10BASE-FB
|
---|
170 | only
|
---|
171 | remoteJabber(7) - remote fault, due to jabber
|
---|
172 |
|
---|
173 | remoteLinkLoss(8) - remote fault, due to link loss
|
---|
174 | remoteTest(9) - remote fault, due to test
|
---|
175 | offline(10) - offline, Clause 37 Auto-Negotiation
|
---|
176 | only
|
---|
177 | autoNegError(11) - Auto-Negotiation Error, Clause 37
|
---|
178 | Auto-Negotiation only
|
---|
179 | pmdLinkFault(12) - PMA/PMD receive link fault. In case
|
---|
180 | of PAF (2BASE-TL / 10PASS-TS PHYs),
|
---|
181 | all PMEs in the aggregation group have
|
---|
182 | detected a link fault
|
---|
183 | wisFrameLoss(13) - WIS loss of frame, 10GBASE-W only
|
---|
184 | wisSignalLoss(14) - WIS loss of signal, 10GBASE-W only
|
---|
185 | pcsLinkFault(15) - PCS receive link fault
|
---|
186 | excessiveBER(16) - PCS Bit Error Ratio monitor
|
---|
187 | reporting excessive error ratio
|
---|
188 | dxsLinkFault(17) - DTE XGXS receive link fault, XAUI only
|
---|
189 | pxsLinkFault(18) - PHY XGXS receive link fault, XAUI only
|
---|
190 | availableReduced(19) - link normal, reduced bandwidth,
|
---|
191 | 2BASE-TL / 10PASS-TS only
|
---|
192 | ready(20) - at least one PME in the aggregation
|
---|
193 | group is detecting handshake tones,
|
---|
194 | 2BASE-TL / 10PASS-TS only
|
---|
195 |
|
---|
196 | If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T,
|
---|
197 | 10BASE-F), then this is equivalent to the link test fail
|
---|
198 | state/low light function. For an AUI, 10BASE2, 10BASE5, or
|
---|
199 | 10BROAD36 MAU, this indicates whether loopback is detected on
|
---|
200 | the DI circuit. The value of this attribute persists between
|
---|
201 | packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and
|
---|
202 | 10BASEFP.
|
---|
203 |
|
---|
204 | At power-up or following a reset, the Media Available state
|
---|
205 | will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and
|
---|
206 | 10BASE-FP MAUs. For these MAUs loopback will be tested on each
|
---|
207 | transmission during which no collision is detected.
|
---|
208 | If DI is receiving input when DO returns to IDL after a
|
---|
209 | transmission and there has been no collision during the
|
---|
210 | transmission, then loopback will be detected. The Media
|
---|
211 | Available state will only change during noncollided
|
---|
212 | transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and
|
---|
213 | 10BASE-FP MAUs.
|
---|
214 |
|
---|
215 | For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX,
|
---|
216 | 100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the
|
---|
217 | states within the link integrity state diagram.
|
---|
218 | Any MAU that implements management of [IEEE802.3] Clause
|
---|
219 | 28 Auto-Negotiation, will map remote fault indication to
|
---|
220 | remoteFault(5).
|
---|
221 |
|
---|
222 | Any MAU that implements management of Clause 37
|
---|
223 | Auto-Negotiation, will map the received RF1 and RF2 bits as
|
---|
224 | follows: Offline maps to offline(10), Link_Failure maps to
|
---|
225 | remoteFault(5), and Auto-Negotiation Error maps to
|
---|
226 | autoNegError(11).
|
---|
227 |
|
---|
228 | The value remoteFault(5) applies to 10BASE-FB remote
|
---|
229 | fault indication, the 100BASE-X far-end fault indication, and
|
---|
230 | nonspecified remote faults from a system running Clause 28
|
---|
231 | Auto-Negotiation.
|
---|
232 |
|
---|
233 | The value remoteJabber(7), remoteLink loss(8), or remoteTest(9)
|
---|
234 | SHOULD be used instead of remoteFault(5) where the reason for
|
---|
235 | remote fault is identified in the remote signaling protocol.
|
---|
236 | Where a Clause 22 MII or Clause 35 GMII is present, a logic
|
---|
237 | one in the remote fault bit maps to the value remoteFault(5),
|
---|
238 | a logic zero in the link status bit maps to the enumeration
|
---|
239 | notAvailable(4). The value notAvailable(4) takes precedence
|
---|
240 | over remoteFault(5).
|
---|
241 |
|
---|
242 | For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to
|
---|
243 | the condition where the PHY (PCS with connected PMEs) is
|
---|
244 | initializing, the value ready(20) maps to the condition where
|
---|
245 | the interface is down and at least one PME in the aggregation
|
---|
246 | group is ready for handshake, the value available(3) maps to
|
---|
247 | the condition where all the PMEs in the aggregation group are
|
---|
248 | up, the value notAvailable(4) maps to the condition where all
|
---|
249 | the PMEs in the aggregation group are down and no handshake
|
---|
250 | tones are detected, the value availableReduced(19) maps to the
|
---|
251 | condition where the interface is up, a link fault is detected
|
---|
252 | at the receive direction by one or more PMEs in the
|
---|
253 | aggregation group, but at least one PME is up and the
|
---|
254 | enumeration pmdLinkFault(12) maps to the condition where a link
|
---|
255 | fault is detected at the receive direction by all of the PMEs
|
---|
256 | in the aggregation group.
|
---|
257 |
|
---|
258 | For 10 Gb/s the enumerations map to value of the link_fault
|
---|
259 | variable within the Link Fault Signaling state diagram
|
---|
260 | as follows: the value OK maps to the value available(3),
|
---|
261 | the value Local Fault maps to the value notAvailable(4),
|
---|
262 | and the value Remote Fault maps to the value remoteFault(5).
|
---|
263 | The value pmdLinkFault(12), wisFrameLoss(13),
|
---|
264 | wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or
|
---|
265 | dxsLinkFault(17) SHOULD be used instead of the value
|
---|
266 | notAvailable(4), where the reason for the Local Fault state can
|
---|
267 | be identified through the use of the Clause 45 MDIO Interface.
|
---|
268 | Where multiple reasons for the Local Fault state can be
|
---|
269 | identified, only the highest precedence error SHOULD be
|
---|
270 |
|
---|
271 | reported. This precedence in descending order is as follows:
|
---|
272 |
|
---|
273 | pxsLinkFault
|
---|
274 | pmdLinkFault
|
---|
275 | wisFrameLoss
|
---|
276 | wisSignalLoss
|
---|
277 | pcsLinkFault
|
---|
278 | excessiveBER
|
---|
279 | dxsLinkFault.
|
---|
280 |
|
---|
281 | Where a Clause 45 MDIO interface is present a logic zero in
|
---|
282 | the PMA/PMD Receive link status bit ([IEEE802.3]
|
---|
283 | Section 45.2.1.2.2) maps to the value pmdLinkFault(12),
|
---|
284 | logic one in the LOF status bit (Section 45.2.2.10.4) maps
|
---|
285 | to the value wisFrameLoss(13), a logic one in the LOS
|
---|
286 | status bit (Section 45.2.2.10.5) maps to the value
|
---|
287 | wisSignalLoss, a logic zero in the PCS Receive
|
---|
288 | link status bit (Section 45.2.3.2.2) maps to the value
|
---|
289 | pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched
|
---|
290 | high BER status bit (Section 45.2.3.12.2) maps to the value
|
---|
291 | excessiveBER, a logic zero in the DTE XS receive link status
|
---|
292 | bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17)
|
---|
293 | and a logic zero in the PHY XS transmit link status bit
|
---|
294 | (Section 45.2.4.2.2) maps to the value pxsLinkFault(18).
|
---|
295 |
|
---|
296 | The most recent version of this textual convention is available
|
---|
297 | in the online version of this MIB module on the IANA web site.
|
---|
298 |
|
---|
299 | Requests for new values should be made to IANA via email
|
---|
300 | (iana&iana.org)."
|
---|
301 | REFERENCE
|
---|
302 | "[IEEE802.3], Section 30.5.1.1.4"
|
---|
303 | SYNTAX INTEGER {
|
---|
304 | other(1),
|
---|
305 | unknown(2),
|
---|
306 | available(3),
|
---|
307 | notAvailable(4),
|
---|
308 | remoteFault(5),
|
---|
309 | invalidSignal(6),
|
---|
310 | remoteJabber(7),
|
---|
311 | remoteLinkLoss(8),
|
---|
312 | remoteTest(9),
|
---|
313 | offline(10),
|
---|
314 | autoNegError(11),
|
---|
315 | pmdLinkFault(12),
|
---|
316 | wisFrameLoss(13),
|
---|
317 | wisSignalLoss(14),
|
---|
318 | pcsLinkFault(15),
|
---|
319 |
|
---|
320 | excessiveBER(16),
|
---|
321 | dxsLinkFault(17),
|
---|
322 | pxsLinkFault(18),
|
---|
323 | availableReduced(19),
|
---|
324 | ready(20)
|
---|
325 | }
|
---|
326 |
|
---|
327 | IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION
|
---|
328 | STATUS current
|
---|
329 | DESCRIPTION
|
---|
330 | "This data type is used as the syntax of the
|
---|
331 | ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and
|
---|
332 | ifMauAutoNegCapReceivedBits objects in the (updated) definition
|
---|
333 | of MAU-MIB's ifMauAutoNegTable.
|
---|
334 |
|
---|
335 | The most recent version of this textual convention is available
|
---|
336 | in the online version of this MIB module on the IANA web site.
|
---|
337 |
|
---|
338 | Requests for new values should be made to IANA via email
|
---|
339 | (iana&iana.org)."
|
---|
340 | REFERENCE
|
---|
341 | "[IEEE802.3], Section 30.6.1.1.5"
|
---|
342 | SYNTAX BITS {
|
---|
343 | bOther(0), -- other or unknown
|
---|
344 | b10baseT(1), -- 10BASE-T half duplex mode
|
---|
345 | b10baseTFD(2), -- 10BASE-T full duplex mode
|
---|
346 | b100baseT4(3), -- 100BASE-T4
|
---|
347 | b100baseTX(4), -- 100BASE-TX half duplex mode
|
---|
348 | b100baseTXFD(5), -- 100BASE-TX full duplex mode
|
---|
349 | b100baseT2(6), -- 100BASE-T2 half duplex mode
|
---|
350 | b100baseT2FD(7), -- 100BASE-T2 full duplex mode
|
---|
351 | bFdxPause(8), -- PAUSE for full-duplex links
|
---|
352 | bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
|
---|
353 | -- links
|
---|
354 | bFdxSPause(10), -- Symmetric PAUSE for full-duplex
|
---|
355 | -- links
|
---|
356 | bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
|
---|
357 | -- full-duplex links
|
---|
358 | b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
|
---|
359 | -- duplex mode
|
---|
360 | b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
|
---|
361 | -- duplex mode
|
---|
362 | b1000baseT(14), -- 1000BASE-T half duplex mode
|
---|
363 | b1000baseTFD(15) -- 1000BASE-T full duplex mode
|
---|
364 | }
|
---|
365 |
|
---|
366 | IANAifJackType ::= TEXTUAL-CONVENTION
|
---|
367 | STATUS current
|
---|
368 |
|
---|
369 | DESCRIPTION
|
---|
370 | "Common enumeration values for repeater and interface MAU
|
---|
371 | jack types. This data type is used as the syntax of the
|
---|
372 | ifJackType and rpJackType objects in the (updated) definition
|
---|
373 | of MAU-MIB's ifJackTable and rpJackTable respectively.
|
---|
374 |
|
---|
375 | Possible values are:
|
---|
376 | other(1) - undefined or unknown
|
---|
377 | rj45(2) - RJ45
|
---|
378 | rj45S(3) - RJ45 shielded
|
---|
379 | db9(4) - DB9
|
---|
380 | bnc(5) - BNC
|
---|
381 | fAUI(6) - AUI female
|
---|
382 | mAUI(7) - AUI male
|
---|
383 | fiberSC(8) - SC fiber
|
---|
384 | fiberMIC(9) - MIC fiber
|
---|
385 | fiberST(10) - ST fiber
|
---|
386 | telco(11) - Telco
|
---|
387 | mtrj(12) - MT-RJ fiber
|
---|
388 | hssdc(13) - fiber channel style-2
|
---|
389 | fiberLC(14) - LC fiber
|
---|
390 | cx4(15) - IB4X for 10GBASE-CX4
|
---|
391 |
|
---|
392 | The most recent version of this textual convention is available
|
---|
393 | in the online version of this MIB module on the IANA web site.
|
---|
394 |
|
---|
395 | Requests for new values should be made to IANA via email
|
---|
396 | (iana&iana.org)."
|
---|
397 | SYNTAX INTEGER {
|
---|
398 | other(1),
|
---|
399 | rj45(2),
|
---|
400 | rj45S(3),
|
---|
401 | db9(4),
|
---|
402 | bnc(5),
|
---|
403 | fAUI(6),
|
---|
404 | mAUI(7),
|
---|
405 | fiberSC(8),
|
---|
406 | fiberMIC(9),
|
---|
407 | fiberST(10),
|
---|
408 | telco(11),
|
---|
409 | mtrj(12),
|
---|
410 | hssdc(13),
|
---|
411 | fiberLC(14),
|
---|
412 | -- new since RFC 3636
|
---|
413 | cx4(15)
|
---|
414 | }
|
---|
415 |
|
---|
416 | -- OBJECT IDENTITIES for MAU types
|
---|
417 |
|
---|
418 | -- (see rpMauType and ifMauType of MAU-MIB for usage)
|
---|
419 | -- The following definitions has been moved from RFC 3636 and
|
---|
420 | -- no longer appear in its revision.
|
---|
421 |
|
---|
422 | dot3MauType OBJECT IDENTIFIER ::= { mib-2 snmpDot3MauMgt(26) 4 }
|
---|
423 |
|
---|
424 | dot3MauTypeAUI OBJECT-IDENTITY
|
---|
425 | STATUS current
|
---|
426 | DESCRIPTION "no internal MAU, view from AUI"
|
---|
427 | REFERENCE "[IEEE802.3], Section 7"
|
---|
428 | ::= { dot3MauType 1 }
|
---|
429 |
|
---|
430 | dot3MauType10Base5 OBJECT-IDENTITY
|
---|
431 | STATUS current
|
---|
432 | DESCRIPTION "thick coax MAU"
|
---|
433 | REFERENCE "[IEEE802.3], Section 7"
|
---|
434 | ::= { dot3MauType 2 }
|
---|
435 |
|
---|
436 | dot3MauTypeFoirl OBJECT-IDENTITY
|
---|
437 | STATUS current
|
---|
438 | DESCRIPTION "FOIRL MAU"
|
---|
439 | REFERENCE "[IEEE802.3], Section 9.9"
|
---|
440 | ::= { dot3MauType 3 }
|
---|
441 |
|
---|
442 | dot3MauType10Base2 OBJECT-IDENTITY
|
---|
443 | STATUS current
|
---|
444 | DESCRIPTION "thin coax MAU"
|
---|
445 | REFERENCE "[IEEE802.3], Section 10"
|
---|
446 | ::= { dot3MauType 4 }
|
---|
447 |
|
---|
448 | dot3MauType10BaseT OBJECT-IDENTITY
|
---|
449 | STATUS current
|
---|
450 | DESCRIPTION "UTP MAU.
|
---|
451 | Note that it is strongly recommended that
|
---|
452 | agents return either dot3MauType10BaseTHD or
|
---|
453 | dot3MauType10BaseTFD if the duplex mode is
|
---|
454 | known. However, management applications should
|
---|
455 | be prepared to receive this MAU type value from
|
---|
456 | older agent implementations."
|
---|
457 | REFERENCE "[IEEE802.3], Section 14"
|
---|
458 | ::= { dot3MauType 5 }
|
---|
459 |
|
---|
460 | dot3MauType10BaseFP OBJECT-IDENTITY
|
---|
461 | STATUS current
|
---|
462 | DESCRIPTION "passive fiber MAU"
|
---|
463 | REFERENCE "[IEEE802.3], Section 16"
|
---|
464 | ::= { dot3MauType 6 }
|
---|
465 |
|
---|
466 | dot3MauType10BaseFB OBJECT-IDENTITY
|
---|
467 | STATUS current
|
---|
468 | DESCRIPTION "sync fiber MAU"
|
---|
469 | REFERENCE "[IEEE802.3], Section 17"
|
---|
470 | ::= { dot3MauType 7 }
|
---|
471 |
|
---|
472 | dot3MauType10BaseFL OBJECT-IDENTITY
|
---|
473 | STATUS current
|
---|
474 | DESCRIPTION "async fiber MAU.
|
---|
475 | Note that it is strongly recommended that
|
---|
476 | agents return either dot3MauType10BaseFLHD or
|
---|
477 | dot3MauType10BaseFLFD if the duplex mode is
|
---|
478 | known. However, management applications should
|
---|
479 | be prepared to receive this MAU type value from
|
---|
480 | older agent implementations."
|
---|
481 | REFERENCE "[IEEE802.3], Section 18"
|
---|
482 | ::= { dot3MauType 8 }
|
---|
483 |
|
---|
484 | dot3MauType10Broad36 OBJECT-IDENTITY
|
---|
485 | STATUS current
|
---|
486 | DESCRIPTION "broadband DTE MAU.
|
---|
487 | Note that 10BROAD36 MAUs can be attached to
|
---|
488 | interfaces but not to repeaters."
|
---|
489 | REFERENCE "[IEEE802.3], Section 11"
|
---|
490 | ::= { dot3MauType 9 }
|
---|
491 |
|
---|
492 | ------ new since RFC 1515:
|
---|
493 | dot3MauType10BaseTHD OBJECT-IDENTITY
|
---|
494 | STATUS current
|
---|
495 | DESCRIPTION "UTP MAU, half duplex mode"
|
---|
496 | REFERENCE "[IEEE802.3], Section 14"
|
---|
497 | ::= { dot3MauType 10 }
|
---|
498 |
|
---|
499 | dot3MauType10BaseTFD OBJECT-IDENTITY
|
---|
500 | STATUS current
|
---|
501 | DESCRIPTION "UTP MAU, full duplex mode"
|
---|
502 | REFERENCE "[IEEE802.3], Section 14"
|
---|
503 | ::= { dot3MauType 11 }
|
---|
504 |
|
---|
505 | dot3MauType10BaseFLHD OBJECT-IDENTITY
|
---|
506 | STATUS current
|
---|
507 | DESCRIPTION "async fiber MAU, half duplex mode"
|
---|
508 | REFERENCE "[IEEE802.3], Section 18"
|
---|
509 | ::= { dot3MauType 12 }
|
---|
510 |
|
---|
511 | dot3MauType10BaseFLFD OBJECT-IDENTITY
|
---|
512 | STATUS current
|
---|
513 | DESCRIPTION "async fiber MAU, full duplex mode"
|
---|
514 |
|
---|
515 | REFERENCE "[IEEE802.3], Section 18"
|
---|
516 | ::= { dot3MauType 13 }
|
---|
517 |
|
---|
518 | dot3MauType100BaseT4 OBJECT-IDENTITY
|
---|
519 | STATUS current
|
---|
520 | DESCRIPTION "4 pair category 3 UTP"
|
---|
521 | REFERENCE "[IEEE802.3], Section 23"
|
---|
522 | ::= { dot3MauType 14 }
|
---|
523 |
|
---|
524 | dot3MauType100BaseTXHD OBJECT-IDENTITY
|
---|
525 | STATUS current
|
---|
526 | DESCRIPTION "2 pair category 5 UTP, half duplex mode"
|
---|
527 | REFERENCE "[IEEE802.3], Section 25"
|
---|
528 | ::= { dot3MauType 15 }
|
---|
529 |
|
---|
530 | dot3MauType100BaseTXFD OBJECT-IDENTITY
|
---|
531 | STATUS current
|
---|
532 | DESCRIPTION "2 pair category 5 UTP, full duplex mode"
|
---|
533 | REFERENCE "[IEEE802.3], Section 25"
|
---|
534 | ::= { dot3MauType 16 }
|
---|
535 |
|
---|
536 | dot3MauType100BaseFXHD OBJECT-IDENTITY
|
---|
537 | STATUS current
|
---|
538 | DESCRIPTION "X fiber over PMT, half duplex mode"
|
---|
539 | REFERENCE "[IEEE802.3], Section 26"
|
---|
540 | ::= { dot3MauType 17 }
|
---|
541 |
|
---|
542 | dot3MauType100BaseFXFD OBJECT-IDENTITY
|
---|
543 | STATUS current
|
---|
544 | DESCRIPTION "X fiber over PMT, full duplex mode"
|
---|
545 | REFERENCE "[IEEE802.3], Section 26"
|
---|
546 | ::= { dot3MauType 18 }
|
---|
547 |
|
---|
548 | dot3MauType100BaseT2HD OBJECT-IDENTITY
|
---|
549 | STATUS current
|
---|
550 | DESCRIPTION "2 pair category 3 UTP, half duplex mode"
|
---|
551 | REFERENCE "[IEEE802.3], Section 32"
|
---|
552 | ::= { dot3MauType 19 }
|
---|
553 |
|
---|
554 | dot3MauType100BaseT2FD OBJECT-IDENTITY
|
---|
555 | STATUS current
|
---|
556 | DESCRIPTION "2 pair category 3 UTP, full duplex mode"
|
---|
557 | REFERENCE "[IEEE802.3], Section 32"
|
---|
558 | ::= { dot3MauType 20 }
|
---|
559 |
|
---|
560 | ------ new since RFC 2239:
|
---|
561 | dot3MauType1000BaseXHD OBJECT-IDENTITY
|
---|
562 | STATUS current
|
---|
563 |
|
---|
564 | DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode"
|
---|
565 | REFERENCE "[IEEE802.3], Section 36"
|
---|
566 | ::= { dot3MauType 21 }
|
---|
567 |
|
---|
568 | dot3MauType1000BaseXFD OBJECT-IDENTITY
|
---|
569 | STATUS current
|
---|
570 | DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode"
|
---|
571 | REFERENCE "[IEEE802.3], Section 36"
|
---|
572 | ::= { dot3MauType 22 }
|
---|
573 |
|
---|
574 | dot3MauType1000BaseLXHD OBJECT-IDENTITY
|
---|
575 | STATUS current
|
---|
576 | DESCRIPTION "Fiber over long-wavelength laser, half duplex
|
---|
577 | mode"
|
---|
578 | REFERENCE "[IEEE802.3], Section 38"
|
---|
579 | ::= { dot3MauType 23 }
|
---|
580 |
|
---|
581 | dot3MauType1000BaseLXFD OBJECT-IDENTITY
|
---|
582 | STATUS current
|
---|
583 | DESCRIPTION "Fiber over long-wavelength laser, full duplex
|
---|
584 | mode"
|
---|
585 | REFERENCE "[IEEE802.3], Section 38"
|
---|
586 | ::= { dot3MauType 24 }
|
---|
587 |
|
---|
588 | dot3MauType1000BaseSXHD OBJECT-IDENTITY
|
---|
589 | STATUS current
|
---|
590 | DESCRIPTION "Fiber over short-wavelength laser, half
|
---|
591 | duplex mode"
|
---|
592 | REFERENCE "[IEEE802.3], Section 38"
|
---|
593 | ::= { dot3MauType 25 }
|
---|
594 |
|
---|
595 | dot3MauType1000BaseSXFD OBJECT-IDENTITY
|
---|
596 | STATUS current
|
---|
597 | DESCRIPTION "Fiber over short-wavelength laser, full
|
---|
598 | duplex mode"
|
---|
599 | REFERENCE "[IEEE802.3], Section 38"
|
---|
600 | ::= { dot3MauType 26 }
|
---|
601 |
|
---|
602 | dot3MauType1000BaseCXHD OBJECT-IDENTITY
|
---|
603 | STATUS current
|
---|
604 | DESCRIPTION "Copper over 150-Ohm balanced cable, half
|
---|
605 | duplex mode"
|
---|
606 | REFERENCE "[IEEE802.3], Section 39"
|
---|
607 | ::= { dot3MauType 27 }
|
---|
608 |
|
---|
609 | dot3MauType1000BaseCXFD OBJECT-IDENTITY
|
---|
610 | STATUS current
|
---|
611 | DESCRIPTION "Copper over 150-Ohm balanced cable, full
|
---|
612 |
|
---|
613 | duplex mode"
|
---|
614 | REFERENCE "[IEEE802.3], Section 39"
|
---|
615 | ::= { dot3MauType 28 }
|
---|
616 |
|
---|
617 | dot3MauType1000BaseTHD OBJECT-IDENTITY
|
---|
618 | STATUS current
|
---|
619 | DESCRIPTION "Four-pair Category 5 UTP, half duplex mode"
|
---|
620 | REFERENCE "[IEEE802.3], Section 40"
|
---|
621 | ::= { dot3MauType 29 }
|
---|
622 |
|
---|
623 | dot3MauType1000BaseTFD OBJECT-IDENTITY
|
---|
624 | STATUS current
|
---|
625 | DESCRIPTION "Four-pair Category 5 UTP, full duplex mode"
|
---|
626 | REFERENCE "[IEEE802.3], Section 40"
|
---|
627 | ::= { dot3MauType 30 }
|
---|
628 |
|
---|
629 | ------ new since RFC 2668:
|
---|
630 | dot3MauType10GigBaseX OBJECT-IDENTITY
|
---|
631 | STATUS current
|
---|
632 | DESCRIPTION "X PCS/PMA, unknown PMD."
|
---|
633 | REFERENCE "[IEEE802.3], Section 48"
|
---|
634 | ::= { dot3MauType 31 }
|
---|
635 |
|
---|
636 | dot3MauType10GigBaseLX4 OBJECT-IDENTITY
|
---|
637 | STATUS current
|
---|
638 | DESCRIPTION "X fiber over WWDM optics"
|
---|
639 | REFERENCE "[IEEE802.3], Section 53"
|
---|
640 | ::= { dot3MauType 32 }
|
---|
641 |
|
---|
642 | dot3MauType10GigBaseR OBJECT-IDENTITY
|
---|
643 | STATUS current
|
---|
644 | DESCRIPTION "R PCS/PMA, unknown PMD."
|
---|
645 | REFERENCE "[IEEE802.3], Section 49"
|
---|
646 | ::= { dot3MauType 33 }
|
---|
647 |
|
---|
648 | dot3MauType10GigBaseER OBJECT-IDENTITY
|
---|
649 | STATUS current
|
---|
650 | DESCRIPTION "R fiber over 1550 nm optics"
|
---|
651 | REFERENCE "[IEEE802.3], Section 52"
|
---|
652 | ::= { dot3MauType 34 }
|
---|
653 |
|
---|
654 | dot3MauType10GigBaseLR OBJECT-IDENTITY
|
---|
655 | STATUS current
|
---|
656 | DESCRIPTION "R fiber over 1310 nm optics"
|
---|
657 | REFERENCE "[IEEE802.3], Section 52"
|
---|
658 | ::= { dot3MauType 35 }
|
---|
659 |
|
---|
660 | dot3MauType10GigBaseSR OBJECT-IDENTITY
|
---|
661 |
|
---|
662 | STATUS current
|
---|
663 | DESCRIPTION "R fiber over 850 nm optics"
|
---|
664 | REFERENCE "[IEEE802.3], Section 52"
|
---|
665 | ::= { dot3MauType 36 }
|
---|
666 |
|
---|
667 | dot3MauType10GigBaseW OBJECT-IDENTITY
|
---|
668 | STATUS current
|
---|
669 | DESCRIPTION "W PCS/PMA, unknown PMD."
|
---|
670 | REFERENCE "[IEEE802.3], Section 49 and 50"
|
---|
671 | ::= { dot3MauType 37 }
|
---|
672 |
|
---|
673 | dot3MauType10GigBaseEW OBJECT-IDENTITY
|
---|
674 | STATUS current
|
---|
675 | DESCRIPTION "W fiber over 1550 nm optics"
|
---|
676 | REFERENCE "[IEEE802.3], Section 52"
|
---|
677 | ::= { dot3MauType 38 }
|
---|
678 |
|
---|
679 | dot3MauType10GigBaseLW OBJECT-IDENTITY
|
---|
680 | STATUS current
|
---|
681 | DESCRIPTION "W fiber over 1310 nm optics"
|
---|
682 | REFERENCE "[IEEE802.3], Section 52"
|
---|
683 | ::= { dot3MauType 39 }
|
---|
684 |
|
---|
685 | dot3MauType10GigBaseSW OBJECT-IDENTITY
|
---|
686 | STATUS current
|
---|
687 | DESCRIPTION "W fiber over 850 nm optics"
|
---|
688 | REFERENCE "[IEEE802.3], Section 52"
|
---|
689 | ::= { dot3MauType 40 }
|
---|
690 |
|
---|
691 | ------ new since RFC 3636:
|
---|
692 | dot3MauType10GigBaseCX4 OBJECT-IDENTITY
|
---|
693 | STATUS current
|
---|
694 | DESCRIPTION "X copper over 8 pair 100-Ohm balanced cable"
|
---|
695 | REFERENCE "[IEEE802.3], Section 54"
|
---|
696 | ::= { dot3MauType 41 }
|
---|
697 |
|
---|
698 | dot3MauType2BaseTL OBJECT-IDENTITY
|
---|
699 | STATUS current
|
---|
700 | DESCRIPTION "Voice grade UTP copper, up to 2700m, optional PAF"
|
---|
701 | REFERENCE "[IEEE802.3], Sections 61 and 63"
|
---|
702 | ::= { dot3MauType 42 }
|
---|
703 |
|
---|
704 | dot3MauType10PassTS OBJECT-IDENTITY
|
---|
705 | STATUS current
|
---|
706 | DESCRIPTION "Voice grade UTP copper, up to 750m, optional PAF"
|
---|
707 | REFERENCE "[IEEE802.3], Sections 61 and 62"
|
---|
708 | ::= { dot3MauType 43 }
|
---|
709 |
|
---|
710 | dot3MauType100BaseBX10D OBJECT-IDENTITY
|
---|
711 | STATUS current
|
---|
712 | DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
|
---|
713 | REFERENCE "[IEEE802.3], Section 58"
|
---|
714 | ::= { dot3MauType 44 }
|
---|
715 |
|
---|
716 | dot3MauType100BaseBX10U OBJECT-IDENTITY
|
---|
717 | STATUS current
|
---|
718 | DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
|
---|
719 | REFERENCE "[IEEE802.3], Section 58"
|
---|
720 | ::= { dot3MauType 45 }
|
---|
721 |
|
---|
722 | dot3MauType100BaseLX10 OBJECT-IDENTITY
|
---|
723 | STATUS current
|
---|
724 | DESCRIPTION "Two single-mode fibers, long wavelength, 10km"
|
---|
725 | REFERENCE "[IEEE802.3], Section 58"
|
---|
726 | ::= { dot3MauType 46 }
|
---|
727 |
|
---|
728 | dot3MauType1000BaseBX10D OBJECT-IDENTITY
|
---|
729 | STATUS current
|
---|
730 | DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
|
---|
731 | REFERENCE "[IEEE802.3], Section 59"
|
---|
732 | ::= { dot3MauType 47 }
|
---|
733 |
|
---|
734 | dot3MauType1000BaseBX10U OBJECT-IDENTITY
|
---|
735 | STATUS current
|
---|
736 | DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
|
---|
737 | REFERENCE "[IEEE802.3], Section 59"
|
---|
738 | ::= { dot3MauType 48 }
|
---|
739 |
|
---|
740 | dot3MauType1000BaseLX10 OBJECT-IDENTITY
|
---|
741 | STATUS current
|
---|
742 | DESCRIPTION "Two sigle-mode fiber, long wavelength, 10km"
|
---|
743 | REFERENCE "[IEEE802.3], Section 59"
|
---|
744 | ::= { dot3MauType 49 }
|
---|
745 |
|
---|
746 | dot3MauType1000BasePX10D OBJECT-IDENTITY
|
---|
747 | STATUS current
|
---|
748 | DESCRIPTION "One single-mode fiber EPON OLT, 10km"
|
---|
749 | REFERENCE "[IEEE802.3], Section 60"
|
---|
750 | ::= { dot3MauType 50 }
|
---|
751 |
|
---|
752 | dot3MauType1000BasePX10U OBJECT-IDENTITY
|
---|
753 | STATUS current
|
---|
754 | DESCRIPTION "One single-mode fiber EPON ONU, 10km"
|
---|
755 | REFERENCE "[IEEE802.3], Section 60"
|
---|
756 | ::= { dot3MauType 51 }
|
---|
757 |
|
---|
758 | dot3MauType1000BasePX20D OBJECT-IDENTITY
|
---|
759 | STATUS current
|
---|
760 | DESCRIPTION "One single-mode fiber EPON OLT, 20km"
|
---|
761 | REFERENCE "[IEEE802.3], Section 60"
|
---|
762 | ::= { dot3MauType 52 }
|
---|
763 |
|
---|
764 | dot3MauType1000BasePX20U OBJECT-IDENTITY
|
---|
765 | STATUS current
|
---|
766 | DESCRIPTION "One single-mode fiber EPON ONU, 20km"
|
---|
767 | REFERENCE "[IEEE802.3], Section 60"
|
---|
768 | ::= { dot3MauType 53 }
|
---|
769 |
|
---|
770 | END
|
---|