[303] | 1 | /**
|
---|
| 2 | ******************************************************************************
|
---|
| 3 | * @file stm32f4xx_ll_usb.h
|
---|
| 4 | * @author MCD Application Team
|
---|
| 5 | * @version V1.4.1
|
---|
| 6 | * @date 09-October-2015
|
---|
| 7 | * @brief Header file of USB Core HAL module.
|
---|
| 8 | ******************************************************************************
|
---|
| 9 | * @attention
|
---|
| 10 | *
|
---|
| 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
---|
| 12 | *
|
---|
| 13 | * Redistribution and use in source and binary forms, with or without modification,
|
---|
| 14 | * are permitted provided that the following conditions are met:
|
---|
| 15 | * 1. Redistributions of source code must retain the above copyright notice,
|
---|
| 16 | * this list of conditions and the following disclaimer.
|
---|
| 17 | * 2. Redistributions in binary form must reproduce the above copyright notice,
|
---|
| 18 | * this list of conditions and the following disclaimer in the documentation
|
---|
| 19 | * and/or other materials provided with the distribution.
|
---|
| 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
---|
| 21 | * may be used to endorse or promote products derived from this software
|
---|
| 22 | * without specific prior written permission.
|
---|
| 23 | *
|
---|
| 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
---|
| 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
---|
| 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
---|
| 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
---|
| 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
---|
| 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
---|
| 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
---|
| 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
---|
| 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
---|
| 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
---|
| 34 | *
|
---|
| 35 | ******************************************************************************
|
---|
| 36 | */
|
---|
| 37 |
|
---|
| 38 | /* Define to prevent recursive inclusion -------------------------------------*/
|
---|
| 39 | #ifndef __STM32F4xx_LL_USB_H
|
---|
| 40 | #define __STM32F4xx_LL_USB_H
|
---|
| 41 |
|
---|
| 42 | #ifdef __cplusplus
|
---|
| 43 | extern "C" {
|
---|
| 44 | #endif
|
---|
| 45 | #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
|
---|
| 46 | defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
|
---|
| 47 | defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
|
---|
| 48 | defined(STM32F469xx) || defined(STM32F479xx)
|
---|
| 49 | /* Includes ------------------------------------------------------------------*/
|
---|
| 50 | #include "stm32f4xx_hal_def.h"
|
---|
| 51 |
|
---|
| 52 | /** @addtogroup STM32F4xx_HAL
|
---|
| 53 | * @{
|
---|
| 54 | */
|
---|
| 55 |
|
---|
| 56 | /** @addtogroup USB_Core
|
---|
| 57 | * @{
|
---|
| 58 | */
|
---|
| 59 |
|
---|
| 60 | /* Exported types ------------------------------------------------------------*/
|
---|
| 61 |
|
---|
| 62 | /**
|
---|
| 63 | * @brief USB Mode definition
|
---|
| 64 | */
|
---|
| 65 | typedef enum
|
---|
| 66 | {
|
---|
| 67 | USB_OTG_DEVICE_MODE = 0,
|
---|
| 68 | USB_OTG_HOST_MODE = 1,
|
---|
| 69 | USB_OTG_DRD_MODE = 2
|
---|
| 70 |
|
---|
| 71 | }USB_OTG_ModeTypeDef;
|
---|
| 72 |
|
---|
| 73 | /**
|
---|
| 74 | * @brief URB States definition
|
---|
| 75 | */
|
---|
| 76 | typedef enum {
|
---|
| 77 | URB_IDLE = 0,
|
---|
| 78 | URB_DONE,
|
---|
| 79 | URB_NOTREADY,
|
---|
| 80 | URB_NYET,
|
---|
| 81 | URB_ERROR,
|
---|
| 82 | URB_STALL
|
---|
| 83 |
|
---|
| 84 | }USB_OTG_URBStateTypeDef;
|
---|
| 85 |
|
---|
| 86 | /**
|
---|
| 87 | * @brief Host channel States definition
|
---|
| 88 | */
|
---|
| 89 | typedef enum {
|
---|
| 90 | HC_IDLE = 0,
|
---|
| 91 | HC_XFRC,
|
---|
| 92 | HC_HALTED,
|
---|
| 93 | HC_NAK,
|
---|
| 94 | HC_NYET,
|
---|
| 95 | HC_STALL,
|
---|
| 96 | HC_XACTERR,
|
---|
| 97 | HC_BBLERR,
|
---|
| 98 | HC_DATATGLERR
|
---|
| 99 |
|
---|
| 100 | }USB_OTG_HCStateTypeDef;
|
---|
| 101 |
|
---|
| 102 | /**
|
---|
| 103 | * @brief PCD Initialization Structure definition
|
---|
| 104 | */
|
---|
| 105 | typedef struct
|
---|
| 106 | {
|
---|
| 107 | uint32_t dev_endpoints; /*!< Device Endpoints number.
|
---|
| 108 | This parameter depends on the used USB core.
|
---|
| 109 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
---|
| 110 |
|
---|
| 111 | uint32_t Host_channels; /*!< Host Channels number.
|
---|
| 112 | This parameter Depends on the used USB core.
|
---|
| 113 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
---|
| 114 |
|
---|
| 115 | uint32_t speed; /*!< USB Core speed.
|
---|
| 116 | This parameter can be any value of @ref USB_Core_Speed_ */
|
---|
| 117 |
|
---|
| 118 | uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
|
---|
| 119 |
|
---|
| 120 | uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
|
---|
| 121 | This parameter can be any value of @ref USB_EP0_MPS_ */
|
---|
| 122 |
|
---|
| 123 | uint32_t phy_itface; /*!< Select the used PHY interface.
|
---|
| 124 | This parameter can be any value of @ref USB_Core_PHY_ */
|
---|
| 125 |
|
---|
| 126 | uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
|
---|
| 127 |
|
---|
| 128 | uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
|
---|
| 129 |
|
---|
| 130 | uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
|
---|
| 131 |
|
---|
| 132 | uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
|
---|
| 133 |
|
---|
| 134 | uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
|
---|
| 135 |
|
---|
| 136 | uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
|
---|
| 137 |
|
---|
| 138 | uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
|
---|
| 139 |
|
---|
| 140 | }USB_OTG_CfgTypeDef;
|
---|
| 141 |
|
---|
| 142 | typedef struct
|
---|
| 143 | {
|
---|
| 144 | uint8_t num; /*!< Endpoint number
|
---|
| 145 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
---|
| 146 |
|
---|
| 147 | uint8_t is_in; /*!< Endpoint direction
|
---|
| 148 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 149 |
|
---|
| 150 | uint8_t is_stall; /*!< Endpoint stall condition
|
---|
| 151 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 152 |
|
---|
| 153 | uint8_t type; /*!< Endpoint type
|
---|
| 154 | This parameter can be any value of @ref USB_EP_Type_ */
|
---|
| 155 |
|
---|
| 156 | uint8_t data_pid_start; /*!< Initial data PID
|
---|
| 157 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 158 |
|
---|
| 159 | uint8_t even_odd_frame; /*!< IFrame parity
|
---|
| 160 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 161 |
|
---|
| 162 | uint16_t tx_fifo_num; /*!< Transmission FIFO number
|
---|
| 163 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
---|
| 164 |
|
---|
| 165 | uint32_t maxpacket; /*!< Endpoint Max packet size
|
---|
| 166 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
|
---|
| 167 |
|
---|
| 168 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
|
---|
| 169 |
|
---|
| 170 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
|
---|
| 171 |
|
---|
| 172 | uint32_t xfer_len; /*!< Current transfer length */
|
---|
| 173 |
|
---|
| 174 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
|
---|
| 175 |
|
---|
| 176 | }USB_OTG_EPTypeDef;
|
---|
| 177 |
|
---|
| 178 | typedef struct
|
---|
| 179 | {
|
---|
| 180 | uint8_t dev_addr ; /*!< USB device address.
|
---|
| 181 | This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
|
---|
| 182 |
|
---|
| 183 | uint8_t ch_num; /*!< Host channel number.
|
---|
| 184 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
---|
| 185 |
|
---|
| 186 | uint8_t ep_num; /*!< Endpoint number.
|
---|
| 187 | This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
|
---|
| 188 |
|
---|
| 189 | uint8_t ep_is_in; /*!< Endpoint direction
|
---|
| 190 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 191 |
|
---|
| 192 | uint8_t speed; /*!< USB Host speed.
|
---|
| 193 | This parameter can be any value of @ref USB_Core_Speed_ */
|
---|
| 194 |
|
---|
| 195 | uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
|
---|
| 196 |
|
---|
| 197 | uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
|
---|
| 198 |
|
---|
| 199 | uint8_t ep_type; /*!< Endpoint Type.
|
---|
| 200 | This parameter can be any value of @ref USB_EP_Type_ */
|
---|
| 201 |
|
---|
| 202 | uint16_t max_packet; /*!< Endpoint Max packet size.
|
---|
| 203 | This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
|
---|
| 204 |
|
---|
| 205 | uint8_t data_pid; /*!< Initial data PID.
|
---|
| 206 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 207 |
|
---|
| 208 | uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
|
---|
| 209 |
|
---|
| 210 | uint32_t xfer_len; /*!< Current transfer length. */
|
---|
| 211 |
|
---|
| 212 | uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
|
---|
| 213 |
|
---|
| 214 | uint8_t toggle_in; /*!< IN transfer current toggle flag.
|
---|
| 215 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 216 |
|
---|
| 217 | uint8_t toggle_out; /*!< OUT transfer current toggle flag
|
---|
| 218 | This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
|
---|
| 219 |
|
---|
| 220 | uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
|
---|
| 221 |
|
---|
| 222 | uint32_t ErrCnt; /*!< Host channel error count.*/
|
---|
| 223 |
|
---|
| 224 | USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
|
---|
| 225 | This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
|
---|
| 226 |
|
---|
| 227 | USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
|
---|
| 228 | This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
|
---|
| 229 |
|
---|
| 230 | }USB_OTG_HCTypeDef;
|
---|
| 231 |
|
---|
| 232 | /* Exported constants --------------------------------------------------------*/
|
---|
| 233 |
|
---|
| 234 | /** @defgroup PCD_Exported_Constants PCD Exported Constants
|
---|
| 235 | * @{
|
---|
| 236 | */
|
---|
| 237 |
|
---|
| 238 | /** @defgroup USB_Core_Mode_ USB Core Mode
|
---|
| 239 | * @{
|
---|
| 240 | */
|
---|
| 241 | #define USB_OTG_MODE_DEVICE 0
|
---|
| 242 | #define USB_OTG_MODE_HOST 1
|
---|
| 243 | #define USB_OTG_MODE_DRD 2
|
---|
| 244 | /**
|
---|
| 245 | * @}
|
---|
| 246 | */
|
---|
| 247 |
|
---|
| 248 | /** @defgroup USB_Core_Speed_ USB Core Speed
|
---|
| 249 | * @{
|
---|
| 250 | */
|
---|
| 251 | #define USB_OTG_SPEED_HIGH 0
|
---|
| 252 | #define USB_OTG_SPEED_HIGH_IN_FULL 1
|
---|
| 253 | #define USB_OTG_SPEED_LOW 2
|
---|
| 254 | #define USB_OTG_SPEED_FULL 3
|
---|
| 255 | /**
|
---|
| 256 | * @}
|
---|
| 257 | */
|
---|
| 258 |
|
---|
| 259 | /** @defgroup USB_Core_PHY_ USB Core PHY
|
---|
| 260 | * @{
|
---|
| 261 | */
|
---|
| 262 | #define USB_OTG_ULPI_PHY 1
|
---|
| 263 | #define USB_OTG_EMBEDDED_PHY 2
|
---|
| 264 | /**
|
---|
| 265 | * @}
|
---|
| 266 | */
|
---|
| 267 |
|
---|
| 268 | /** @defgroup USB_Core_MPS_ USB Core MPS
|
---|
| 269 | * @{
|
---|
| 270 | */
|
---|
| 271 | #define USB_OTG_HS_MAX_PACKET_SIZE 512
|
---|
| 272 | #define USB_OTG_FS_MAX_PACKET_SIZE 64
|
---|
| 273 | #define USB_OTG_MAX_EP0_SIZE 64
|
---|
| 274 | /**
|
---|
| 275 | * @}
|
---|
| 276 | */
|
---|
| 277 |
|
---|
| 278 | /** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency
|
---|
| 279 | * @{
|
---|
| 280 | */
|
---|
| 281 | #define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1)
|
---|
| 282 | #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
|
---|
| 283 | #define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
|
---|
| 284 | #define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
|
---|
| 285 | /**
|
---|
| 286 | * @}
|
---|
| 287 | */
|
---|
| 288 |
|
---|
| 289 | /** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval
|
---|
| 290 | * @{
|
---|
| 291 | */
|
---|
| 292 | #define DCFG_FRAME_INTERVAL_80 0
|
---|
| 293 | #define DCFG_FRAME_INTERVAL_85 1
|
---|
| 294 | #define DCFG_FRAME_INTERVAL_90 2
|
---|
| 295 | #define DCFG_FRAME_INTERVAL_95 3
|
---|
| 296 | /**
|
---|
| 297 | * @}
|
---|
| 298 | */
|
---|
| 299 |
|
---|
| 300 | /** @defgroup USB_EP0_MPS_ USB EP0 MPS
|
---|
| 301 | * @{
|
---|
| 302 | */
|
---|
| 303 | #define DEP0CTL_MPS_64 0
|
---|
| 304 | #define DEP0CTL_MPS_32 1
|
---|
| 305 | #define DEP0CTL_MPS_16 2
|
---|
| 306 | #define DEP0CTL_MPS_8 3
|
---|
| 307 | /**
|
---|
| 308 | * @}
|
---|
| 309 | */
|
---|
| 310 |
|
---|
| 311 | /** @defgroup USB_EP_Speed_ USB EP Speed
|
---|
| 312 | * @{
|
---|
| 313 | */
|
---|
| 314 | #define EP_SPEED_LOW 0
|
---|
| 315 | #define EP_SPEED_FULL 1
|
---|
| 316 | #define EP_SPEED_HIGH 2
|
---|
| 317 | /**
|
---|
| 318 | * @}
|
---|
| 319 | */
|
---|
| 320 |
|
---|
| 321 | /** @defgroup USB_EP_Type_ USB EP Type
|
---|
| 322 | * @{
|
---|
| 323 | */
|
---|
| 324 | #define EP_TYPE_CTRL 0
|
---|
| 325 | #define EP_TYPE_ISOC 1
|
---|
| 326 | #define EP_TYPE_BULK 2
|
---|
| 327 | #define EP_TYPE_INTR 3
|
---|
| 328 | #define EP_TYPE_MSK 3
|
---|
| 329 | /**
|
---|
| 330 | * @}
|
---|
| 331 | */
|
---|
| 332 |
|
---|
| 333 | /** @defgroup USB_STS_Defines_ USB STS Defines
|
---|
| 334 | * @{
|
---|
| 335 | */
|
---|
| 336 | #define STS_GOUT_NAK 1
|
---|
| 337 | #define STS_DATA_UPDT 2
|
---|
| 338 | #define STS_XFER_COMP 3
|
---|
| 339 | #define STS_SETUP_COMP 4
|
---|
| 340 | #define STS_SETUP_UPDT 6
|
---|
| 341 | /**
|
---|
| 342 | * @}
|
---|
| 343 | */
|
---|
| 344 |
|
---|
| 345 | /** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines
|
---|
| 346 | * @{
|
---|
| 347 | */
|
---|
| 348 | #define HCFG_30_60_MHZ 0
|
---|
| 349 | #define HCFG_48_MHZ 1
|
---|
| 350 | #define HCFG_6_MHZ 2
|
---|
| 351 | /**
|
---|
| 352 | * @}
|
---|
| 353 | */
|
---|
| 354 |
|
---|
| 355 | /** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines
|
---|
| 356 | * @{
|
---|
| 357 | */
|
---|
| 358 | #define HPRT0_PRTSPD_HIGH_SPEED 0
|
---|
| 359 | #define HPRT0_PRTSPD_FULL_SPEED 1
|
---|
| 360 | #define HPRT0_PRTSPD_LOW_SPEED 2
|
---|
| 361 | /**
|
---|
| 362 | * @}
|
---|
| 363 | */
|
---|
| 364 |
|
---|
| 365 | #define HCCHAR_CTRL 0
|
---|
| 366 | #define HCCHAR_ISOC 1
|
---|
| 367 | #define HCCHAR_BULK 2
|
---|
| 368 | #define HCCHAR_INTR 3
|
---|
| 369 |
|
---|
| 370 | #define HC_PID_DATA0 0
|
---|
| 371 | #define HC_PID_DATA2 1
|
---|
| 372 | #define HC_PID_DATA1 2
|
---|
| 373 | #define HC_PID_SETUP 3
|
---|
| 374 |
|
---|
| 375 | #define GRXSTS_PKTSTS_IN 2
|
---|
| 376 | #define GRXSTS_PKTSTS_IN_XFER_COMP 3
|
---|
| 377 | #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
|
---|
| 378 | #define GRXSTS_PKTSTS_CH_HALTED 7
|
---|
| 379 |
|
---|
| 380 | #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
|
---|
| 381 | #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
|
---|
| 382 |
|
---|
| 383 | #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
|
---|
| 384 | #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
|
---|
| 385 | #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
|
---|
| 386 | #define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
|
---|
| 387 |
|
---|
| 388 | #define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
|
---|
| 389 | #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
|
---|
| 390 | /**
|
---|
| 391 | * @}
|
---|
| 392 | */
|
---|
| 393 | /* Exported macro ------------------------------------------------------------*/
|
---|
| 394 | #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
|
---|
| 395 | #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
|
---|
| 396 |
|
---|
| 397 | #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
|
---|
| 398 | #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
|
---|
| 399 |
|
---|
| 400 | /* Exported functions --------------------------------------------------------*/
|
---|
| 401 | HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
|
---|
| 402 | HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
|
---|
| 403 | HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 404 | HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 405 | HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
|
---|
| 406 | HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
|
---|
| 407 | HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 408 | HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
|
---|
| 409 | HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
---|
| 410 | HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
---|
| 411 | HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
---|
| 412 | HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
|
---|
| 413 | HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
|
---|
| 414 | HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
|
---|
| 415 | HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
|
---|
| 416 | void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
|
---|
| 417 | HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
|
---|
| 418 | HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
|
---|
| 419 | HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
|
---|
| 420 | HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 421 | HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 422 | HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 423 | HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 424 | HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
|
---|
| 425 | uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 426 | uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 427 | uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 428 | uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 429 | uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
|
---|
| 430 | uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 431 | uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
|
---|
| 432 | void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
|
---|
| 433 |
|
---|
| 434 | HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
|
---|
| 435 | HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
|
---|
| 436 | HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 437 | HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
|
---|
| 438 | uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 439 | uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 440 | HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
|
---|
| 441 | uint8_t ch_num,
|
---|
| 442 | uint8_t epnum,
|
---|
| 443 | uint8_t dev_address,
|
---|
| 444 | uint8_t speed,
|
---|
| 445 | uint8_t ep_type,
|
---|
| 446 | uint16_t mps);
|
---|
| 447 | HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
|
---|
| 448 | uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
|
---|
| 449 | HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
|
---|
| 450 | HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
|
---|
| 451 | HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
|
---|
| 452 |
|
---|
| 453 | /**
|
---|
| 454 | * @}
|
---|
| 455 | */
|
---|
| 456 |
|
---|
| 457 | /**
|
---|
| 458 | * @}
|
---|
| 459 | */
|
---|
| 460 | #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
|
---|
| 461 | STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx */
|
---|
| 462 | #ifdef __cplusplus
|
---|
| 463 | }
|
---|
| 464 | #endif
|
---|
| 465 |
|
---|
| 466 |
|
---|
| 467 | #endif /* __STM32F4xx_LL_USB_H */
|
---|
| 468 |
|
---|
| 469 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
---|