source: azure_iot_hub_f767zi/trunk/asp_baseplatform/lwip/contrib-2.1.0/examples/example_app/lwipcfg.h.example@ 457

Last change on this file since 457 was 457, checked in by coas-nagasima, 4 years ago

ファイルを追加
File size: 3.0 KB
Line 
1/**
2 * Additional settings for the win32 port.
3 * Copy this to lwipcfg_msvc.h and make the config changes you need.
4 */
5
6/* configuration for this port */
7#define PPP_USERNAME "Admin"
8#define PPP_PASSWORD "pass"
9
10/** Define this to the index of the windows network adapter to use */
11#define PACKET_LIB_ADAPTER_NR 1
12/** Define this to the GUID of the windows network adapter to use
13 * or NOT define this if you want PACKET_LIB_ADAPTER_NR to be used */
14/*#define PACKET_LIB_ADAPTER_GUID "00000000-0000-0000-0000-000000000000"*/
15/*#define PACKET_LIB_GET_ADAPTER_NETADDRESS(addr) IP4_ADDR((addr), 192,168,1,0)*/
16/*#define PACKET_LIB_QUIET*/
17
18/* If these 2 are not defined, the corresponding config setting is used */
19/* #define USE_DHCP 0 */
20/* #define USE_AUTOIP 0 */
21
22/* #define USE_PCAPIF 1 */
23#define LWIP_PORT_INIT_IPADDR(addr) IP4_ADDR((addr), 192,168,1,200)
24#define LWIP_PORT_INIT_GW(addr) IP4_ADDR((addr), 192,168,1,1)
25#define LWIP_PORT_INIT_NETMASK(addr) IP4_ADDR((addr), 255,255,255,0)
26
27/* remember to change this MAC address to suit your needs!
28 the last octet will be increased by netif->num for each netif */
29#define LWIP_MAC_ADDR_BASE {0x00,0x01,0x02,0x03,0x04,0x05}
30
31/* #define USE_SLIPIF 0 */
32/* #define SIO_USE_COMPORT 0 */
33#ifdef USE_SLIPIF
34#if USE_SLIPIF
35#define LWIP_PORT_INIT_SLIP1_IPADDR(addr) IP4_ADDR((addr), 192, 168, 2, 2)
36#define LWIP_PORT_INIT_SLIP1_GW(addr) IP4_ADDR((addr), 192, 168, 2, 1)
37#define LWIP_PORT_INIT_SLIP1_NETMASK(addr) IP4_ADDR((addr), 255, 255, 255, 0)
38#if USE_SLIPIF > 1
39#define LWIP_PORT_INIT_SLIP2_IPADDR(addr) IP4_ADDR((addr), 192, 168, 2, 1)
40#define LWIP_PORT_INIT_SLIP2_GW(addr) IP4_ADDR((addr), 0, 0, 0, 0)
41#define LWIP_PORT_INIT_SLIP2_NETMASK(addr) IP4_ADDR((addr), 255, 255, 255, 0)*/
42#endif /* USE_SLIPIF > 1 */
43#endif /* USE_SLIPIF */
44#endif /* USE_SLIPIF */
45
46/* configuration for applications */
47
48#define LWIP_CHARGEN_APP 0
49#define LWIP_DNS_APP 0
50#define LWIP_HTTPD_APP 0
51/* Set this to 1 to use the netconn http server,
52 * otherwise the raw api server will be used. */
53/*#define LWIP_HTTPD_APP_NETCONN */
54#define LWIP_NETBIOS_APP 0
55#define LWIP_NETIO_APP 0
56#define LWIP_MDNS_APP 0
57#define LWIP_MQTT_APP 0
58#define LWIP_PING_APP 0
59#define LWIP_RTP_APP 0
60#define LWIP_SHELL_APP 0
61#define LWIP_SNMP_APP 0
62#define LWIP_SNTP_APP 0
63#define LWIP_SOCKET_EXAMPLES_APP 0
64#define LWIP_TCPECHO_APP 0
65/* Set this to 1 to use the netconn tcpecho server,
66 * otherwise the raw api server will be used. */
67/*#define LWIP_TCPECHO_APP_NETCONN */
68#define LWIP_TFTP_APP 0
69#define LWIP_UDPECHO_APP 0
70#define LWIP_LWIPERF_APP 0
71
72/*#define USE_DHCP 1*/
73/*#define USE_AUTOIP 1*/
74
75/* define this to your custom application-init function */
76/* #define LWIP_APP_INIT my_app_init() */
Note: See TracBrowser for help on using the repository browser.