source: asp3_tinet_ecnl_rx/trunk/btstack/src/l2cap.h@ 337

Last change on this file since 337 was 337, checked in by coas-nagasima, 6 years ago

ASP3版ECNLを追加

  • Property svn:eol-style set to native
  • Property svn:mime-type set to text/x-chdr;charset=UTF-8
File size: 9.5 KB
Line 
1/*
2 * Copyright (C) 2009-2012 by Matthias Ringwald
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions
6 * are met:
7 *
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the copyright holders nor the names of
14 * contributors may be used to endorse or promote products derived
15 * from this software without specific prior written permission.
16 * 4. Any redistribution, use, or modification is done solely for
17 * personal benefit and not for any commercial purpose or for
18 * monetary gain.
19 *
20 * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS
21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
23 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
24 * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
26 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
27 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
28 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
29 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
30 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * SUCH DAMAGE.
32 *
33 * Please inquire about commercial licensing options at btstack@ringwald.ch
34 *
35 */
36
37/*
38 * l2cap.h
39 *
40 * Logical Link Control and Adaption Protocl (L2CAP)
41 *
42 * Created by Matthias Ringwald on 5/16/09.
43 */
44
45#ifndef __L2CAP_H
46#define __L2CAP_H
47
48#include "hci.h"
49#include "l2cap_signaling.h"
50#include <btstack/utils.h>
51#include <btstack/btstack.h>
52
53#if defined __cplusplus
54extern "C" {
55#endif
56
57#define L2CAP_SIG_ID_INVALID 0
58
59#define L2CAP_HEADER_SIZE 4
60
61// size of HCI ACL + L2CAP Header for regular data packets (8)
62#define COMPLETE_L2CAP_HEADER (HCI_ACL_HEADER_SIZE + L2CAP_HEADER_SIZE)
63
64// minimum signaling MTU
65#define L2CAP_MINIMAL_MTU 48
66#define L2CAP_DEFAULT_MTU 672
67
68// Minimum/default MTU
69#define L2CAP_LE_DEFAULT_MTU 23
70
71// check L2CAP MTU
72#if (L2CAP_MINIMAL_MTU + L2CAP_HEADER_SIZE) > HCI_ACL_PAYLOAD_SIZE
73#error "HCI_ACL_PAYLOAD_SIZE too small for minimal L2CAP MTU of 48 bytes"
74#endif
75
76// L2CAP Fixed Channel IDs
77#define L2CAP_CID_SIGNALING 0x0001
78#define L2CAP_CID_CONNECTIONLESS_CHANNEL 0x0002
79#define L2CAP_CID_ATTRIBUTE_PROTOCOL 0x0004
80#define L2CAP_CID_SIGNALING_LE 0x0005
81#define L2CAP_CID_SECURITY_MANAGER_PROTOCOL 0x0006
82
83// L2CAP Configuration Result Codes
84#define L2CAP_CONF_RESULT_UNKNOWN_OPTIONS 0x0003
85
86// L2CAP Reject Result Codes
87#define L2CAP_REJ_CMD_UNKNOWN 0x0000
88
89// Response Timeout eXpired
90#define L2CAP_RTX_TIMEOUT_MS 2000
91
92// Extended Response Timeout eXpired
93#define L2CAP_ERTX_TIMEOUT_MS 120000
94
95// private structs
96typedef enum {
97 L2CAP_STATE_CLOSED = 1, // no baseband
98 L2CAP_STATE_WILL_SEND_CREATE_CONNECTION,
99 L2CAP_STATE_WAIT_CONNECTION_COMPLETE,
100 L2CAP_STATE_WAIT_REMOTE_SUPPORTED_FEATURES,
101 L2CAP_STATE_WAIT_INCOMING_SECURITY_LEVEL_UPDATE,
102 L2CAP_STATE_WAIT_OUTGOING_SECURITY_LEVEL_UPDATE,
103 L2CAP_STATE_WAIT_CLIENT_ACCEPT_OR_REJECT,
104 L2CAP_STATE_WAIT_CONNECT_RSP, // from peer
105 L2CAP_STATE_CONFIG,
106 L2CAP_STATE_OPEN,
107 L2CAP_STATE_WAIT_DISCONNECT, // from application
108 L2CAP_STATE_WILL_SEND_CONNECTION_REQUEST,
109 L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_INSUFFICIENT_SECURITY,
110 L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_DECLINE,
111 L2CAP_STATE_WILL_SEND_CONNECTION_RESPONSE_ACCEPT,
112 L2CAP_STATE_WILL_SEND_DISCONNECT_REQUEST,
113 L2CAP_STATE_WILL_SEND_DISCONNECT_RESPONSE,
114} L2CAP_STATE;
115
116typedef enum {
117 L2CAP_CHANNEL_STATE_VAR_NONE = 0,
118 L2CAP_CHANNEL_STATE_VAR_RCVD_CONF_REQ = 1 << 0,
119 L2CAP_CHANNEL_STATE_VAR_RCVD_CONF_RSP = 1 << 1,
120 L2CAP_CHANNEL_STATE_VAR_SEND_CONF_REQ = 1 << 2,
121 L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP = 1 << 3,
122 L2CAP_CHANNEL_STATE_VAR_SENT_CONF_REQ = 1 << 4,
123 L2CAP_CHANNEL_STATE_VAR_SENT_CONF_RSP = 1 << 5,
124 L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_MTU = 1 << 6, // in CONF RSP, add MTU field
125 L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_CONT = 1 << 7, // in CONF RSP, set CONTINUE flag
126 L2CAP_CHANNEL_STATE_VAR_SEND_CONF_RSP_INVALID = 1 << 8, // in CONF RSP, send UNKNOWN OPTIONS
127 L2CAP_CHANNEL_STATE_VAR_SEND_CMD_REJ_UNKNOWN = 1 << 9, // send CMD_REJ with reason unknown
128 L2CAP_CHANNEL_STATE_VAR_SEND_CONN_RESP_PEND = 1 << 10, // send Connection Respond with pending
129} L2CAP_CHANNEL_STATE_VAR;
130
131// info regarding an actual coneection
132typedef struct {
133 // linked list - assert: first field
134 linked_item_t item;
135
136 L2CAP_STATE state;
137 L2CAP_CHANNEL_STATE_VAR state_var;
138
139 bd_addr_t address;
140 hci_con_handle_t handle;
141
142 uint8_t remote_sig_id; // used by other side, needed for delayed response
143 uint8_t local_sig_id; // own signaling identifier
144
145 uint16_t local_cid;
146 uint16_t remote_cid;
147
148 uint16_t local_mtu;
149 uint16_t remote_mtu;
150
151 uint16_t flush_timeout; // default 0xffff
152
153 uint16_t psm;
154
155 gap_security_level_t required_security_level;
156
157 uint8_t packets_granted; // number of L2CAP/ACL packets client is allowed to send
158
159 uint8_t reason; // used in decline internal
160
161 timer_source_t rtx; // also used for ertx
162
163 // client connection
164 void * connection;
165
166 // internal connection
167 btstack_packet_handler_t packet_handler;
168
169} l2cap_channel_t;
170
171// info regarding potential connections
172typedef struct {
173 // linked list - assert: first field
174 linked_item_t item;
175
176 // service id
177 uint16_t psm;
178
179 // incoming MTU
180 uint16_t mtu;
181
182 // client connection
183 void *connection;
184
185 // internal connection
186 btstack_packet_handler_t packet_handler;
187
188 // required security level
189 gap_security_level_t required_security_level;
190} l2cap_service_t;
191
192
193typedef struct l2cap_signaling_response {
194 hci_con_handle_t handle;
195 uint8_t sig_id;
196 uint8_t code;
197 uint16_t data; // infoType for INFORMATION REQUEST, result for CONNECTION request and command unknown
198} l2cap_signaling_response_t;
199
200
201void l2cap_block_new_credits(uint8_t blocked);
202
203int l2cap_can_send_packet_now(uint16_t local_cid); // non-blocking UART write
204
205int l2cap_can_send_fixed_channel_packet_now(uint16_t handle);
206
207// @deprecated use l2cap_can_send_fixed_channel_packet_now instead
208int l2cap_can_send_connectionless_packet_now(void);
209
210int l2cap_reserve_packet_buffer(void);
211void l2cap_release_packet_buffer(void);
212
213// get outgoing buffer and prepare data
214uint8_t *l2cap_get_outgoing_buffer(void);
215
216int l2cap_send_prepared(uint16_t local_cid, uint16_t len);
217
218int l2cap_send_prepared_connectionless(uint16_t handle, uint16_t cid, uint16_t len);
219
220// Bluetooth 4.0 - allows to register handler for Attribute Protocol and Security Manager Protocol
221void l2cap_register_fixed_channel(btstack_packet_handler_t packet_handler, uint16_t channel_id);
222
223uint16_t l2cap_max_mtu(void);
224uint16_t l2cap_max_le_mtu(void);
225
226int l2cap_send_connectionless(uint16_t handle, uint16_t cid, uint8_t *data, uint16_t len);
227
228int l2cap_send_echo_request(uint16_t handle, uint8_t *data, uint16_t len);
229
230void l2cap_require_security_level_2_for_outgoing_sdp(void); // testing
231
232/** Embedded API **/
233
234// Set up L2CAP and register L2CAP with HCI layer.
235void l2cap_init(void);
236
237// Registers a packet handler that handles HCI and general BTstack events.
238void l2cap_register_packet_handler(void (*handler)(void * connection, uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size));
239
240// Creates L2CAP channel to the PSM of a remote device with baseband address. A new baseband connection will be initiated if necessary.
241void l2cap_create_channel_internal(void * connection, btstack_packet_handler_t packet_handler, bd_addr_t address, uint16_t psm, uint16_t mtu);
242
243// Disconencts L2CAP channel with given identifier.
244void l2cap_disconnect_internal(uint16_t local_cid, uint8_t reason);
245
246// Queries the maximal transfer unit (MTU) for L2CAP channel with given identifier.
247uint16_t l2cap_get_remote_mtu_for_local_cid(uint16_t local_cid);
248
249// Sends L2CAP data packet to the channel with given identifier.
250int l2cap_send_internal(uint16_t local_cid, uint8_t *data, uint16_t len);
251
252// Registers L2CAP service with given PSM and MTU, and assigns a packet handler. On embedded systems, use NULL for connection parameter.
253void l2cap_register_service_internal(void *connection, btstack_packet_handler_t packet_handler, uint16_t psm, uint16_t mtu, gap_security_level_t security_level);
254
255// Unregisters L2CAP service with given PSM. On embedded systems, use NULL for connection parameter.
256void l2cap_unregister_service_internal(void *connection, uint16_t psm);
257
258// Accepts/Deny incoming L2CAP connection.
259void l2cap_accept_connection_internal(uint16_t local_cid);
260void l2cap_decline_connection_internal(uint16_t local_cid, uint8_t reason);
261
262
263// Request LE connection parameter update
264int l2cap_le_request_connection_parameter_update(uint16_t handle, uint16_t interval_min, uint16_t interval_max, uint16_t slave_latency, uint16_t timeout_multiplier);
265
266#if defined __cplusplus
267}
268#endif
269
270#endif // __L2CAP_H
Note: See TracBrowser for help on using the repository browser.