source: EcnlProtoTool/trunk/openssl-1.1.0e/crypto/ct/ct_locl.h@ 331

/*
 * Copyright 2015-2016 The OpenSSL Project Authors. All Rights Reserved.
 *
 * Licensed under the OpenSSL license (the "License").  You may not use
 * this file except in compliance with the License.  You can obtain a copy
 * in the file LICENSE in the source distribution or at
 * https://www.openssl.org/source/license.html
 */

#include <stddef.h>
#include <openssl/ct.h>
#include <openssl/evp.h>
#include <openssl/x509.h>
#include <openssl/x509v3.h>
#include <openssl/safestack.h>

/*
 * From RFC6962: opaque SerializedSCT<1..2^16-1>; struct { SerializedSCT
 * sct_list <1..2^16-1>; } SignedCertificateTimestampList;
 */
# define MAX_SCT_SIZE            65535
# define MAX_SCT_LIST_SIZE       MAX_SCT_SIZE

/*
 * Macros to read and write integers in network-byte order.
 */

#define n2s(c,s)        ((s=(((unsigned int)((c)[0]))<< 8)| \
                            (((unsigned int)((c)[1]))    )),c+=2)

#define s2n(s,c)        ((c[0]=(unsigned char)(((s)>> 8)&0xff), \
                          c[1]=(unsigned char)(((s)    )&0xff)),c+=2)

#define l2n3(l,c)       ((c[0]=(unsigned char)(((l)>>16)&0xff), \
                          c[1]=(unsigned char)(((l)>> 8)&0xff), \
                          c[2]=(unsigned char)(((l)    )&0xff)),c+=3)

#define n2l8(c,l)       (l =((uint64_t)(*((c)++)))<<56, \
                         l|=((uint64_t)(*((c)++)))<<48, \
                         l|=((uint64_t)(*((c)++)))<<40, \
                         l|=((uint64_t)(*((c)++)))<<32, \
                         l|=((uint64_t)(*((c)++)))<<24, \
                         l|=((uint64_t)(*((c)++)))<<16, \
                         l|=((uint64_t)(*((c)++)))<< 8, \
                         l|=((uint64_t)(*((c)++))))

#define l2n8(l,c)       (*((c)++)=(unsigned char)(((l)>>56)&0xff), \
                         *((c)++)=(unsigned char)(((l)>>48)&0xff), \
                         *((c)++)=(unsigned char)(((l)>>40)&0xff), \
                         *((c)++)=(unsigned char)(((l)>>32)&0xff), \
                         *((c)++)=(unsigned char)(((l)>>24)&0xff), \
                         *((c)++)=(unsigned char)(((l)>>16)&0xff), \
                         *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
                         *((c)++)=(unsigned char)(((l)    )&0xff))

/* Signed Certificate Timestamp */
struct sct_st {
    sct_version_t version;
    /* If version is not SCT_VERSION_V1, this contains the encoded SCT */
    unsigned char *sct;
    size_t sct_len;
    /* If version is SCT_VERSION_V1, fields below contain components of the SCT */
    unsigned char *log_id;
    size_t log_id_len;
    /*
    * Note, we cannot distinguish between an unset timestamp, and one
    * that is set to 0.  However since CT didn't exist in 1970, no real
    * SCT should ever be set as such.
    */
    uint64_t timestamp;
    unsigned char *ext;
    size_t ext_len;
    unsigned char hash_alg;
    unsigned char sig_alg;
    unsigned char *sig;
    size_t sig_len;
    /* Log entry type */
    ct_log_entry_type_t entry_type;
    /* Where this SCT was found, e.g. certificate, OCSP response, etc. */
    sct_source_t source;
    /* The result of the last attempt to validate this SCT. */
    sct_validation_status_t validation_status;
};

/* Miscellaneous data that is useful when verifying an SCT  */
struct sct_ctx_st {
    /* Public key */
    EVP_PKEY *pkey;
    /* Hash of public key */
    unsigned char *pkeyhash;
    size_t pkeyhashlen;
    /* For pre-certificate: issuer public key hash */
    unsigned char *ihash;
    size_t ihashlen;
    /* certificate encoding */
    unsigned char *certder;
    size_t certderlen;
    /* pre-certificate encoding */
    unsigned char *preder;
    size_t prederlen;
    /* milliseconds since epoch (to check that the SCT isn't from the future) */
    uint64_t epoch_time_in_ms;
};

/* Context when evaluating whether a Certificate Transparency policy is met */
struct ct_policy_eval_ctx_st {
    X509 *cert;
    X509 *issuer;
    CTLOG_STORE *log_store;
    /* milliseconds since epoch (to check that SCTs aren't from the future) */
    uint64_t epoch_time_in_ms;
};

/*
 * Creates a new context for verifying an SCT.
 */
SCT_CTX *SCT_CTX_new(void);
/*
 * Deletes an SCT verification context.
 */
void SCT_CTX_free(SCT_CTX *sctx);

/*
 * Sets the certificate that the SCT was created for.
 * If *cert does not have a poison extension, presigner must be NULL.
 * If *cert does not have a poison extension, it may have a single SCT
 * (NID_ct_precert_scts) extension.
 * If either *cert or *presigner have an AKID (NID_authority_key_identifier)
 * extension, both must have one.
 * Returns 1 on success, 0 on failure.
 */
__owur int SCT_CTX_set1_cert(SCT_CTX *sctx, X509 *cert, X509 *presigner);

/*
 * Sets the issuer of the certificate that the SCT was created for.
 * This is just a convenience method to save extracting the public key and
 * calling SCT_CTX_set1_issuer_pubkey().
 * Issuer must not be NULL.
 * Returns 1 on success, 0 on failure.
 */
__owur int SCT_CTX_set1_issuer(SCT_CTX *sctx, const X509 *issuer);

/*
 * Sets the public key of the issuer of the certificate that the SCT was created
 * for.
 * The public key must not be NULL.
 * Returns 1 on success, 0 on failure.
 */
__owur int SCT_CTX_set1_issuer_pubkey(SCT_CTX *sctx, X509_PUBKEY *pubkey);

/*
 * Sets the public key of the CT log that the SCT is from.
 * Returns 1 on success, 0 on failure.
 */
__owur int SCT_CTX_set1_pubkey(SCT_CTX *sctx, X509_PUBKEY *pubkey);

/*
 * Sets the time to evaluate the SCT against, in milliseconds since the Unix
 * epoch. If the SCT's timestamp is after this time, it will be interpreted as
 * having been issued in the future. RFC6962 states that "TLS clients MUST
 * reject SCTs whose timestamp is in the future", so an SCT will not validate
 * in this case.
 */
void SCT_CTX_set_time(SCT_CTX *sctx, uint64_t time_in_ms);

/*
 * Verifies an SCT with the given context.
 * Returns 1 if the SCT verifies successfully; any other value indicates
 * failure. See EVP_DigestVerifyFinal() for the meaning of those values.
 */
__owur int SCT_CTX_verify(const SCT_CTX *sctx, const SCT *sct);

/*
 * Does this SCT have the minimum fields populated to be usable?
 * Returns 1 if so, 0 otherwise.
 */
__owur int SCT_is_complete(const SCT *sct);

/*
 * Does this SCT have the signature-related fields populated?
 * Returns 1 if so, 0 otherwise.
 * This checks that the signature and hash algorithms are set to supported
 * values and that the signature field is set.
 */
__owur int SCT_signature_is_complete(const SCT *sct);

/*
 * TODO(RJPercival): Create an SCT_signature struct and make i2o_SCT_signature
 * and o2i_SCT_signature conform to the i2d/d2i conventions.
 */

/*
* Serialize (to TLS format) an |sct| signature and write it to |out|.
* If |out| is null, no signature will be output but the length will be returned.
* If |out| points to a null pointer, a string will be allocated to hold the
* TLS-format signature. It is the responsibility of the caller to free it.
* If |out| points to an allocated string, the signature will be written to it.
* The length of the signature in TLS format will be returned.
*/
__owur int i2o_SCT_signature(const SCT *sct, unsigned char **out);

/*
* Parses an SCT signature in TLS format and populates the |sct| with it.
* |in| should be a pointer to a string containing the TLS-format signature.
* |in| will be advanced to the end of the signature if parsing succeeds.
* |len| should be the length of the signature in |in|.
* Returns the number of bytes parsed, or a negative integer if an error occurs.
* If an error occurs, the SCT's signature NID may be updated whilst the
* signature field itself remains unset.
*/
__owur int o2i_SCT_signature(SCT *sct, const unsigned char **in, size_t len);

/*
 * Handlers for Certificate Transparency X509v3/OCSP extensions
 */
extern const X509V3_EXT_METHOD v3_ct_scts[3];