_ _ ____ _ ___| | | | _ \| | / __| | | | |_) | | | (__| |_| | _ <| |___ \___|\___/|_| \_\_____| Changelog Version 7.47.1 (8 Feb 2016) Daniel Stenberg (8 Feb 2016) - RELEASE-NOTES: curl 7.47.1 time! Jay Satiro (8 Feb 2016) - tool_operhlp: Check for backslashes in get_url_file_name Extract the filename from the last slash or backslash. Prior to this change backslashes could be part of the filename. This change needed for the curl tool built for Cygwin. Refer to the CYGWIN addendum in advisory 20160127B. Bug: https://curl.haxx.se/docs/adv_20160127B.html Daniel Stenberg (7 Feb 2016) - RELEASE-NOTES: synced with d6a8869ea34 Jay Satiro (6 Feb 2016) - openssl: Fix signed/unsigned mismatch warning in X509V3_ext sk_X509_EXTENSION_num may return an unsigned integer, however the value will fit in an int. Bug: https://github.com/curl/curl/commit/dd1b44c#commitcomment-15913896 Reported-by: Gisle Vanem Daniel Stenberg (7 Feb 2016) - TODO: 17.11 -w output to stderr Jay Satiro (6 Feb 2016) - [Michael Kaufmann brought this change] idn_win32: Better error checking .. also fix a conversion bug in the unused function curl_win32_ascii_to_idn(). And remove wprintfs on error (Jay). Bug: https://github.com/curl/curl/pull/637 - [Gisle Vanem brought this change] examples/asiohiper: Avoid function name collision on Windows closesocket => close_socket Winsock already has the former. Bug: https://curl.haxx.se/mail/lib-2016-02/0016.html - [Gisle Vanem brought this change] examples/htmltitle: Use _stricmp on Windows Bug: https://curl.haxx.se/mail/lib-2016-02/0017.html Daniel Stenberg (6 Feb 2016) - COPYING: clarify that Daniel is not the sole author ... done on request and as it is a fair point. Jay Satiro (5 Feb 2016) - unit1604: Fix unit setup return code - tool_doswin: Use type SANITIZEcode in sanitize_file_name - tool_doswin: Improve sanitization processing - Add unit test 1604 to test the sanitize_file_name function. - Use -DCURL_STATICLIB when building libcurltool for unit testing. - Better detection of reserved DOS device names. - New flags to modify sanitize behavior: SANITIZE_ALLOW_COLONS: Allow colons SANITIZE_ALLOW_PATH: Allow path separators and colons SANITIZE_ALLOW_RESERVED: Allow reserved device names SANITIZE_ALLOW_TRUNCATE: Allow truncating a long filename - Restore sanitization of banned characters from user-specified outfile. Prior to this commit sanitization of a user-specified outfile was temporarily disabled in 2b6dadc because there was no way to allow path separators and colons through while replacing other banned characters. Now in such a case we call the sanitize function with SANITIZE_ALLOW_PATH which allows path separators and colons to pass through. Closes https://github.com/curl/curl/issues/624 Reported-by: Octavio Schroeder - [Viktor Szakats brought this change] URLs: change more http to https - sasl_sspi: Fix memory leak in domain populate Free an existing domain before replacing it. Bug: https://github.com/curl/curl/issues/635 Reported-by: silveja1@users.noreply.github.com Daniel Stenberg (4 Feb 2016) - [Viktor Szakats brought this change] URLs: follow GitHub project rename (also Travis CI) Closes #632 - CHANGES.o: fix references to curl.haxx.nu I removed the scheme prefix from the URLs references this host name, as we don't own/run that anymore but the name is kept for historic reasons. - HISTORY: add some info about when we used which host names Jay Satiro (2 Feb 2016) - [Viktor Szakats brought this change] URLs: change more http to https Dan Fandrich (3 Feb 2016) - URLs: Change more haxx.se URLs from http: to https: Daniel Stenberg (3 Feb 2016) - RELEASE-NOTES: synced with 4af40b364 - URLs: change all http:// URLs to https:// - configure: update the copyright year range in output - dotdot: allow an empty input string too It isn't used by the code in current conditions but for safety it seems sensible to at least not crash on such input. Extended unit test 1395 to verify this too as well as a plain "/" input. - HTTPS: update a bunch of URLs from HTTP to HTTPS - [Sergei Nikulov brought this change] AppVeyor: updated to handle OpenSSL/WinSSL builds Closes #621 Jay Satiro (1 Feb 2016) - tool_operate: Don't sanitize --output path (Windows) Due to path separators being incorrectly sanitized in --output pathnames, eg -o c:\foo => c__foo This is a partial revert of 3017d8a until I write a proper fix. The remote-name will continue to be sanitized, but if the user specified an --output with string replacement (#1, #2, etc) that data is unsanitized until I finish a fix. Bug: https://github.com/bagder/curl/issues/624 Reported-by: Octavio Schroeder - curl.1: Explain remote-name behavior if file already exists .. also warn about letting the server pick the filename. - [Gisle Vanem brought this change] urldata: Error on missing SSL backend-specific connect info Daniel Stenberg (28 Jan 2016) - bump: towards the next (7.47.1 ?) - [Sergei Nikulov brought this change] cmake: fixed when OpenSSL enabled on Windows and schannel detected Closes #617 Jay Satiro (28 Jan 2016) - [Sergei Nikulov brought this change] urldata: moved common variable out of ifdef Closes https://github.com/bagder/curl/pull/618 - [Viktor Szakats brought this change] tool_doswin: silence unused function warning tool_doswin.c:185:14: warning: 'msdosify' defined but not used [-Wunused-function] Closes https://github.com/bagder/curl/pull/616 Daniel Stenberg (27 Jan 2016) - getredirect.c: fix variable name Reported-by: Bernard Spil Version 7.47.0 (27 Jan 2016) Daniel Stenberg (27 Jan 2016) - examples/Makefile.inc: specify programs without .c! - THANKS: 6 new contributors from 7.47.0 release notes - [Isaac Boukris brought this change] NTLM: Fix ConnectionExists to compare Proxy credentials Proxy NTLM authentication should compare credentials when re-using a connection similar to host authentication, as it authenticate the connection. Example: curl -v -x http://proxy:port http://host/ -U good_user:good_pwd --proxy-ntlm --next -x http://proxy:port http://host/ [-U fake_user:fake_pwd --proxy-ntlm] CVE-2016-0755 Bug: http://curl.haxx.se/docs/adv_20160127A.html - [Ray Satiro brought this change] curl: avoid local drive traversal when saving file (Windows) curl does not sanitize colons in a remote file name that is used as the local file name. This may lead to a vulnerability on systems where the colon is a special path character. Currently Windows/DOS is the only OS where this vulnerability applies. CVE-2016-0754 Bug: http://curl.haxx.se/docs/adv_20160127B.html - RELEASE-NOTES: 7.47.0 - FAQ: language fix in 4.19 - [paulehoffman brought this change] FAQ: Update to point to GitHub Current FAQ didn't make it clear where the main repo is. Closes #612 - maketgz: generate date stamp with LC_TIME=C bug: http://curl.haxx.se/mail/lib-2016-01/0123.html - curl_multi_socket_action.3: line wrap - RELEASE-NOTES: synced with d58ba66eeceb Steve Holme (21 Jan 2016) - TODO: "Create remote directories" for SMB Jay Satiro (18 Jan 2016) - mbedtls: Fix pinned key return value on fail - Switch from verifying a pinned public key in a callback during the certificate verification to inline after the certificate verification. The callback method had three problems: 1. If a pinned public key didn't match, CURLE_SSL_PINNEDPUBKEYNOTMATCH was not returned. 2. If peer certificate verification was disabled the pinned key verification did not take place as it should. 3. (related to #2) If there was no certificate of depth 0 the callback would not have checked the pinned public key. Though all those problems could have been fixed it would have made the code more complex. Instead we now verify inline after the certificate verification in mbedtls_connect_step2. Ref: http://curl.haxx.se/mail/lib-2016-01/0047.html Ref: https://github.com/bagder/curl/pull/601 - tests: Add a test for pinnedpubkey fail even when insecure Because disabling the peer verification (--insecure) must not disable the public key pinning check (--pinnedpubkey). - [Daniel Schauenberg brought this change] CURLINFO_RESPONSE_CODE.3: add example Kamil Dudka (15 Jan 2016) - ssh: make CURLOPT_SSH_PUBLIC_KEYFILE treat "" as NULL The CURLOPT_SSH_PUBLIC_KEYFILE option has been documented to handle empty strings specially since curl-7_25_0-31-g05a443a but the behavior was unintentionally removed in curl-7_38_0-47-gfa7d04f. This commit restores the original behavior and clarifies it in the documentation that NULL and "" have both the same meaning when passed to CURLOPT_SSH_PUBLIC_KEYFILE. Bug: http://curl.haxx.se/mail/lib-2016-01/0072.html Daniel Stenberg (14 Jan 2016) - RELEASE-NOTES: synced with 35083ca60ed035a - openssl: improved error detection/reporting ... by extracting the LIB + REASON from the OpenSSL error code. OpenSSL 1.1.0+ returned a new func number of another cerfificate fail so this required a fix and this is the better way to catch this error anyway. - openssl: for 1.1.0+ they now provide a SSLeay() macro of their own - CURLOPT_RESOLVE.3: minor language polish - configure: assume IPv6 works when cross-compiled The configure test uses AC_TRY_RUN to figure out if an ipv6 socket works, and testing like that doesn't work for cross-compiles. These days IPv6 support is widespread so a blind guess is probably more likely to be 'yes' than 'no' now. Further: anyone who cross-compiles can use configure's --disable-ipv6 to explicitly disable IPv6 and that also works for cross-compiles. Made happen after discussions in issue #594 - TODO: "Try to URL encode given URL" Closes #514 - ConnectionExists: only do pipelining/multiplexing when asked When an HTTP/2 upgrade request fails (no protocol switch), it would previously detect that as still possible to pipeline on (which is acorrect) and do that when PIPEWAIT was enabled even if pipelining was not explictily enabled. It should only pipelined if explicitly asked to. Closes #584 - [Mohammad AlSaleh brought this change] lib: Prefix URLs with lower-case protocol names/schemes Before this patch, if a URL does not start with the protocol name/scheme, effective URLs would be prefixed with upper-case protocol names/schemes. This behavior might not be expected by library users or end users. For example, if `CURLOPT_DEFAULT_PROTOCOL` is set to "https". And the URL is "hostname/path". The effective URL would be "HTTPS://hostname/path" instead of "https://hostname/path". After this patch, effective URLs would be prefixed with a lower-case protocol name/scheme. Closes #597 Signed-off-by: Mohammad AlSaleh - [Alessandro Ghedini brought this change] scripts: don't generate and install zsh completion when cross-compiling - [Alessandro Ghedini brought this change] scripts: fix zsh completion generation The script should use the just-built curl, not the system one. This fixes zsh completion generation when no system curl is installed. - [Alessandro Ghedini brought this change] zsh.pl: fail if no curl is found Instead of generation a broken completion file. - [Michael Kaufmann brought this change] IDN host names: Remove the port number before converting to ACE Closes #596 Jay Satiro (10 Jan 2016) - runtests: Add mbedTLS to the SSL backends .. and enable SSLpinning tests for mbedTLS, BoringSSL and LibreSSL. Daniel Stenberg (10 Jan 2016) - [Thomas Glanzmann brought this change] mbedtls: implement CURLOPT_PINNEDPUBLICKEY Jay Satiro (9 Jan 2016) - [Tatsuhiro Tsujikawa brought this change] url: Fix compile error with --enable-werror - [Tatsuhiro Tsujikawa brought this change] http2: Ensure that http2_handle_stream_close is called Previously, when HTTP/2 is enabled and used, and stream has content length known, Curl_read was not called when there was no bytes left to read. Because of this, we could not make sure that http2_handle_stream_close was called for every stream. Since we use http2_handle_stream_close to emit trailer fields, they were effectively ignored. This commit changes the code so that Curl_read is called even if no bytes left to read, to ensure that http2_handle_stream_close is called for every stream. Discussed in https://github.com/bagder/curl/pull/564 Daniel Stenberg (8 Jan 2016) - http2: handle the received SETTINGS frame This regression landed in 5778e6f5 and made libcurl not act on received settings and instead stayed with its internal defaults. Bug: http://curl.haxx.se/mail/lib-2016-01/0031.html Reported-by: Bankde - Revert "multiplex: allow only once HTTP/2 is actually used" This reverts commit 46cb70e9fa81c9a56de484cdd7c5d9d0d9fbec36. Bug: http://curl.haxx.se/mail/lib-2016-01/0031.html Jay Satiro (8 Jan 2016) - [Tatsuhiro Tsujikawa brought this change] http2: Fix PUSH_PROMISE headers being treated as trailers Discussed in https://github.com/bagder/curl/pull/564 Daniel Stenberg (8 Jan 2016) - [Michael Kaufmann brought this change] connection reuse: IDN host names fixed Use the ACE form of IDN hostnames as key in the connection cache. Add new tests. Closes #592 - tests: mark IPv6 FTP and FTPS tests with the FTP keyword Jay Satiro (7 Jan 2016) - mbedtls: Fix ALPN support - Fix ALPN reply detection. - Wrap nghttp2 code in ifdef USE_NGHTTP2. Prior to this change ALPN and HTTP/2 did not work properly in mbedTLS. - http2: Fix client write for trailers on stream close Check that the trailer buffer exists before attempting a client write for trailers on stream close. Refer to comments in https://github.com/bagder/curl/pull/564 Daniel Stenberg (7 Jan 2016) - COPYING: update general copyright year range - ConnectionExists: add missing newline in infof() call Mistake from commit a464f33843ee1 - multiplex: allow only once HTTP/2 is actually used To make sure curl doesn't allow multiplexing before a connection is upgraded to HTTP/2 (like when Upgrade: h2c fails), we must make sure the connection uses HTTP/2 as well and not only check what's wanted. Closes #584 Patch-by: c0ff Jay Satiro (4 Jan 2016) - curl_global_init.3: Add Windows-specific info for init via DLL - Add to both curl_global_init.3 and libcurl.3 the caveat for Windows that initializing libcurl via a DLL's DllMain or static initializer could cause a deadlock. Bug: https://github.com/bagder/curl/issues/586 Reported-by: marc-groundctl@users.noreply.github.com Daniel Stenberg (4 Jan 2016) - FAQ: clarify who to mail about ECCN clarifications - progressfunc.c: spellfix description - docs/examples/multi-app.c: fix bad desc formatting - examples: added descriptions - example/simple.c: add description - getredirect.c: a new example Marc Hoersken (27 Dec 2015) - RELEASE-NOTES: add 5e0e81a9c4e35f04ca Daniel Stenberg (26 Dec 2015) - RELEASE-NOTES: synced with 2aec4359db1088b10d Marc Hoersken (26 Dec 2015) - test 1515: add data check - test 1515: add MSYS support by passing a relative path MSYS would otherwise turn a /-style path into a C:\-style path. - test 539: use datacheck mode text for ASCII-mode LISTings While still using datacheck mode binary for the inline reply data. - runtests.pl: check up to 5 data parts with different text modes Move the text-mode conversion for reply/replycheck from the verify section into the load section and add support for 4 more check parts. Daniel Stenberg (24 Dec 2015) - CURLOPT_RANGE: for HTTP servers, range support is optional Marc Hoersken (24 Dec 2015) - tests 1048 and 1050: use datacheck mode text for ASCII-mode LISTings - tests 706 and 707: use datacheck mode text for ASCII-mode LISTings - tests 400,403,406: use datacheck mode text for ASCII-mode LISTings - sockfilt.c: fix calculation of sleep timeout on Windows Not converting to double caused small timeouts to be skipped. - tests first.c: fix calculation of sleep timeout on Windows Not converting to double caused small timeouts to be skipped. - test 573: add more debug output - ftplistparser.c: fix handling of file LISTings using Windows EOL Previously file.txt[CR][LF] would have been returned as file.tx (without the last t) if filetype is symlink. Now the t is included and the internal item_length includes the zero byte. Spotted using test 576 on Windows. - test 16: fix on Linux (and Windows) by using plain ASCII characters Follow up on b064ff0c351bb287557228575ef4c1d079b866fb, thanks Daniel. - tftpd server: add Windows support by writing files in binary mode - tests 252-255: use datacheck mode text for ASCII-mode LISTings - test 16: fix on Windows by converting data file from ANSI to UTF-8 Daniel Stenberg (23 Dec 2015) - Makefile.inc: s/curl_SOURCES/CURL_FILES This allows the root Makefile.am to include the Makefile.inc without causing automake to warn on it (variables named *_SOURCES are magic). curl_SOURCES is then instead assigned properly in src/Makefile.am only. Closes #577 - [Anders Bakken brought this change] ConnectionExists: with *PIPEWAIT, wait for connections Try harder to prevent libcurl from opening up an additional socket when CURLOPT_PIPEWAIT is set. Accomplished by letting ongoing TCP and TLS handshakes complete first before the decision is made. Closes #575 - [Anders Bakken brought this change] Add .dir-locals and set c-basic-offset to 2. This makes it easier for emacs users to automatically get the right 2-space indentation when they edit curl source files. c++-mode is in there as well because Emacs can't easily know if something is a C or C++ header. Closes #574 - [Johannes Schindelin brought this change] configure: detect IPv6 support on Windows This patch was "nicked" from the MINGW-packages project by Daniel. https://github.com/Alexpux/MINGW-packages/commit/9253d0bf58a1486e91f7efb5316e7fdb48fa4007 Signed-off-by: Johannes Schindelin - configure: allow static builds on mingw This patch is adopted from the MINGW-packages project. It makes it possible to build curl both shared and static again. URL: https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-curl Marc Hoersken (17 Dec 2015) - test 1326: fix file check since curl is outputting binary data - test 1326: fix getting stuck on Windows due to incomplete request The request needs to be read and send in binary mode in order to use CRLF instead of LF. Adding --upload-file - causes curl to read stdin in binary mode. Daniel Stenberg (17 Dec 2015) - RELEASE-NOTES: command line option recount Dan Fandrich (16 Dec 2015) - scripts/Makefile: build zsh script even in an out-of-tree build Marc Hoersken (16 Dec 2015) - sockfilt.c: added some debug output to select_ws - sockfilt.c: keep lines shorter than 80 chars - sockfilt.c: do not wait on unreliable file or pipe handle The previous implementation caused issues on modern MSYS2 runtimes. Daniel Stenberg (16 Dec 2015) - cyassl: deal with lack of *get_peer_certificate The function is only present in wolfssl/cyassl if it was built with --enable-opensslextra. With these checks added, pinning support is disabled unless the TLS lib has that function available. Also fix the mistake in configure that checks for the wrong lib name. Closes #566 - wolfssl: handle builds without SSLv3 support - [Tatsuhiro Tsujikawa brought this change] http2: Support trailer fields This commit adds trailer support in HTTP/2. In HTTP/1.1, chunked encoding must be used to send trialer fields. HTTP/2 deprecated any trandfer-encoding, including chunked. But trailer fields are now always available. Since trailer fields are relatively rare these days (gRPC uses them extensively though), allocating buffer for trailer fields is done when we detect that HEADERS frame containing trailer fields is started. We use Curl_add_buffer_* functions to buffer all trailers, just like we do for regular header fields. And then deliver them when stream is closed. We have to be careful here so that all data are delivered to upper layer before sending trailers to the application. We can deliver trailer field one by one using NGHTTP2_ERR_PAUSE mechanism, but current method is far more simple. Another possibility is use chunked encoding internally for HTTP/2 traffic. I have not tested it, but it could add another overhead. Closes #564 - RELEASE-NOTES: synced with 6c2c019654e658a Jay Satiro (15 Dec 2015) - x509asn1: Fix host altname verification - In Curl_verifyhost check all altnames in the certificate. Prior to this change only the first altname was checked. Only the GSKit SSL backend was affected by this bug. Bug: http://curl.haxx.se/mail/lib-2015-12/0062.html Reported-by: John Kohl Daniel Stenberg (15 Dec 2015) - curl --expect100-timeout: added This is the new command line option to set the value for the existing libcurl option CURLOPT_EXPECT_100_TIMEOUT_MS - cyassl: fix compiler warning on type conversion - curlver: the pending release will become 7.47.0 - [Anders Bakken brought this change] setstropt: const-correctness Closes #565 - ROADMAP: implemented HTTP2 for HTTPS-only - HTTP2.md: spell fix and remove TODO now implemented - libressl: the latest openssl x509 funcs are not in libressl - curl: use 2TLS by default Make this the default for the curl tool (if built with HTTP/2 powers enabled) unless a specific HTTP version is requested on the command line. This should allow more users to get HTTP/2 powers without having to change anything. - http: add libcurl option to allow HTTP/2 for HTTPS only ... and stick to 1.1 for HTTP. This is in line with what browsers do and should have very little risk. - openssl: adapt to openssl >= 1.1.0 X509 opaque structs Closes #491 - openssl: avoid BIO_reset() warnings since it returns a value - openssl: adapt to 1.1.0+ name changes - scripts/makefile: add standard header - scripts/Makefile: fix GNUism and survive no perl Closes #555 Reported-by: Thomas Klausner - fix b6d5cb40d7038fe - [Tatsuhiro Tsujikawa brought this change] http2: Fix hanging paused stream When NGHTTP2_ERR_PAUSE is returned from data_source_read_callback, we might not process DATA frame fully. Calling nghttp2_session_mem_recv() again will continue to process DATA frame, but if there is no incoming frames, then we have to call it again with 0-length data. Without this, on_stream_close callback will not be called, and stream could be hanged. Bug: http://curl.haxx.se/mail/lib-2015-11/0103.html Reported-by: Francisco Moraes - [Christian Stewart brought this change] build: fix compilation error with CURL_DISABLE_VERBOSE_STRINGS With curl disable verbose strings in http.c the compilation fails due to the data variable being undefined later on in the function. Closes #558 Jay Satiro (7 Dec 2015) - [Gisle Vanem brought this change] config-win32: Fix warning HAVE_WINSOCK2_H undefined - [Gisle Vanem brought this change] openssl: BoringSSL doesn't have CONF_modules_free - [Gisle Vanem brought this change] lwip: Fix compatibility issues with later versions The name of the header guard in lwIP's has changed from '__LWIP_OPT_H__' to 'LWIP_HDR_OPT_H' (bug #35874 in May 2015). Other fixes: - In curl_setup.h, the problem with an old PSDK doesn't apply if lwIP is used. - In memdebug.h, the 'socket' should be undefined first due to lwIP's lwip_socket() macro. - In curl_addrinfo.c lwIP's getaddrinfo() + freeaddrinfo() macros need special handling because they were undef'ed in memdebug.h. - In select.c we can't use preprocessor conditionals inside select if MSVC and select is a macro, as it is with lwIP. http://curl.haxx.se/mail/lib-2015-12/0023.html http://curl.haxx.se/mail/lib-2015-12/0024.html Patrick Monnerat (7 Dec 2015) - os400: define CURL_VERSION_PSL in ILE/RPG binding Jay Satiro (7 Dec 2015) - [Gisle Vanem brought this change] version: Add flag CURL_VERSION_PSL for libpsl - formdata: Check if length is too large for memory - If the size of the length type (curl_off_t) is greater than the size of the size_t type then check before allocating memory to make sure the value of length will fit in a size_t without overflow. If it doesn't then return CURLE_BAD_FUNCTION_ARGUMENT. Bug: https://github.com/bagder/curl/issues/425#issuecomment-154518679 Reported-by: Steve Holme Steve Holme (3 Dec 2015) - tests: Corrected copy and pasted comments from commit e643c5c908 Daniel Stenberg (3 Dec 2015) - curl: remove keepalive #ifdef checks done on libcurl's behalf They didn't match the ifdef logic used within libcurl anyway so they could indeed warn for the wrong case - plus the tool cannot know how the lib actually performs at that level. Steve Holme (2 Dec 2015) - test947: Corrected typo in test name - tests: Disable the OAUTHBEARER tests when using a non-default port number Tests 842, 843, 844, 845, 887, 888, 889, 890, 946, 947, 948 and 949 fail if a custom port number is specified via the -b option of runtests.pl. Suggested by: Kamil Dudka Bug: http://curl.haxx.se/mail/lib-2015-12/0003.html Daniel Stenberg (2 Dec 2015) - bump: towards next release for all we know now, it might be called 7.46.1 Version 7.46.0 (1 Dec 2015) Daniel Stenberg (1 Dec 2015) - RELEASE-NOTES: updated contributor count for 7.46.0 - THANKS: new contributors from the 7.46.0 release - THANKS-filter: single Tim Rühsen spelling - docs/examples: gitignore some more built examples - RELEASE-NOTES; this bug was never released - RELEASE-NOTES: synced with e55f15454efacb0 - [Flavio Medeiros brought this change] Curl_read_plain: clean up ifdefs that break statements Closes #546 - http2: convert some verbose output into debug-only output - http2 push: add missing inits of new stream - set the correct stream_id for pushed streams - init maxdownload and size properly - http2 push: set weight for new stream give the new stream the old one's stream_weight internally to avoid sending a PRIORITY frame unless asked for it - curl_setup.h: undef freeaddrinfo in c-ares block to fix build Fixes warnings 78c25c854a added. - nonblock: fix setting non-blocking mode for Amiga IoctlSocket() apparently wants a pointer to a long, passed as a char * in its third parameter. This bug was introduced already back in commit c5fdeef41d from October 1 2001! Bug: http://curl.haxx.se/mail/lib-2015-11/0088.html Reported-by: Norbert Kett - zsh install: fix DESTDIR support Reported-by: Mohammad AlSaleh Dan Fandrich (27 Nov 2015) - lib: Only define curl_dofreeaddrinfo if struct addrinfo is available Steve Holme (27 Nov 2015) - tool_paramhlp: Fixed display of URL index in password prompt for --next Commit f3bae6ed73 added the URL index to the password prompt when using --next. Unfortunately, because the size_t specifier (%zu) is not supported by all sprintf() implementations we use the curl_off_t format specifier instead. The display of an incorrect value arises on platforms where size_t and curl_off_t are of a different size. Daniel Stenberg (25 Nov 2015) - timecond: do not add if-modified-since without timecondition The RTSP code path didn't skip adding the if-modified-since for certain RTSP code paths, even if CURLOPT_TIMECONDITION was set to CURL_TIMECOND_NONE. Also, an unknown non-zero CURLOPT_TIMECONDITION value no longer equals CURL_TIMECOND_IFMODSINCE. Bug: http://stackoverflow.com/questions/33903982/curl-timecond-none-doesnt-work-how-to-remove-if-modified-since-header - RELEASE-NOTES: synced with 99d17a5e2ba77e58 - examples/README: cut out the incomplete list ... and add a generic explanation for them instead. Each example file should contain its own description these days. - test1513: make sure the callback is only called once - [Daniel Shahaf brought this change] build: Install zsh completion Fixes #534 Closes #537 - done: make sure the final progress update is made It would previously be skipped if an existing error was returned, but would lead to a previous value being left there and later used. CURLINFO_TOTAL_TIME for example. Still it avoids that final progress update if we reached DONE as the result of a callback abort to avoid another callback to be called after an abort-by-callback. Reported-by: Lukas Ruzicka Closes #538 - curl: expanded the -XHEAD warning text ... to also mention the specific options used. - Revert "cleanup: general removal of TODO (and similar) comments" This reverts commit 64e959ffe37c436503f9fed1ce2d6ee6ae50bd9a. Feedback-by: Dan Fandrich URL: http://curl.haxx.se/mail/lib-2015-11/0062.html - CURLOPT_HEADERFUNCTION.3: fix typo Refer to _HEADERDATA not _WRITEDATA. Reported-by: Michał Piechowski - TODO: TCP Fast Open Steve Holme (22 Nov 2015) - examples: Added website parse-able descriptions to the e-mail examples - TODO: Added another 'multi-interface' idea - smb.c: Fixed compilation warnings smb.c:134:3: warning: conversion to 'short unsigned int' from 'int' may alter its value smb.c:146:42: warning: conversion to 'unsigned int' from 'long long unsigned int' may alter its value smb.c:146:65: warning: conversion to 'unsigned int' from 'long long unsigned int' may alter its value - schannel: Corrected copy/paste error in commit 8d17117683 - schannel: Use GetVersionEx() when VerifyVersionInfo() isn't available Regression from commit 7a8e861a5 as highlighted in the msys autobuilds. - examples: Fixed compilation warnings pop3-multi.c:96:5: warning: implicit declaration of function 'memset' imap-multi.c:96:5: warning: implicit declaration of function 'memset' http2-download.c:226:5: warning: implicit declaration of function 'memset' http2-upload.c:290:5: warning: implicit declaration of function 'memset' http2-upload.c:290:5: warning: implicit declaration of function 'memset' - Makefile.inc: Fixed test run error test845 not present in tests/data/Makefile.inc Daniel Stenberg (20 Nov 2015) - TODO: remove duplicated title - TODO: added two more libcurl ideas Moved some ideas from "next major" to just ordinary ideas since we can always add new things while keeping the old without doing a "next major". Steve Holme (20 Nov 2015) - tests: Re-enabled tests 889 and 890 following POP3 fix - pop3: Differentiate between success and continuation responses - pop3: Added clarity on some server response codes Daniel Stenberg (20 Nov 2015) - [Daniel Shahaf brought this change] build: Fix theoretical infinite loops Add error-checking to 'cd' in a few cases where omitting the checks might result in an infinite loop. Closes #535 Patrick Monnerat (19 Nov 2015) - curl.h: s/#defien/#define/ - os400: synchronize ILE/RPG header file - os400: Provide options for libssh2 use in compile scripts. Adjust README. Daniel Stenberg (19 Nov 2015) - [danielsh@apache.org brought this change] zsh completion: Preserve single quotes in output When an option's help string contains literal single quotes, those single quotes would be stripped from the option's description in the completion output (unless the zsh RC_QUOTES option were set while the completion function was being sourced, which is not the default). This patch makes the completion output contain single quotes where the --help output does. Closes #532 Jay Satiro (18 Nov 2015) - [MaxGiting brought this change] FAQ: Grammar changes Closes https://github.com/bagder/curl/pull/533 Daniel Stenberg (17 Nov 2015) - http2: http_done: don't free already-freed push headers The push headers are freed after the push callback has been invoked, meaning this code should only free the headers if the callback was never invoked and thus the headers weren't freed at that time. Reported-by: Davey Shafik - [Anders Bakken brought this change] getconnectinfo: Don't call recv(2) if socket == -1 Closes #528 - CURLMOPT_PUSHFUNCTION.3: *_byname() returns only the first header ... if there are more than one using the same name - http2: minor comment typo - sasl; fix checksrc warnings Steve Holme (15 Nov 2015) - RELEASE-NOTES: Adjusted for the recent OAuth 2.0 activity - tests: Disabled 889 and 890 until we support POP3 continuation responses As POP3 final and continuation responses both begin with a + character, and both the finalcode and contcode variables in SASLprotoc are set as such, we cannot tell the difference between them when we are expecting an optional continuation from the server such as the following: + something else from the server +OK final response Disabled these tests until such a time we can tell the responses apart. - tests: Corrected typos from commit ba4d8f7eba - tests: Added OAUTHBEARER failure response tests - oauth2: Support OAUTHBEARER failures sent as continuation responses According to RFC7628 a failure message may be sent by the server in a base64 encoded JSON string as a continuation response. Currently only implemented for OAUTHBEARER and not XAUTH2. Daniel Stenberg (15 Nov 2015) - RELEASE-NOTES: synced with 808a17ee675 Steve Holme (14 Nov 2015) - tests: Renamed existing OAuth 2.0 (XOAUTH) tests - tests: Added OAuth 2.0 (OAUTHBEARER) tests - oauth2: Added support for OAUTHBEARER SASL mechanism to IMAP, POP3 and SNMP OAUTHBEARER is now the official "registered" SASL mechanism name for OAuth 2.0. However, we don't want to drop support for XOAUTH2 as some servers won't support the new mechanism yet. Daniel Stenberg (13 Nov 2015) - RELEASE-NOTES: recounted curl_easy_setopt() options - typecheck-gcc.h: add missing slist-using options CURLOPT_RESOLVE and CURLOPT_PROXYHEADER were missing Also sorted the list. - typecheck-gcc.h: added CURLOPT_CLOSESOCKETDATA ... and sorted curl_is_cb_data_option alphabetically Jay Satiro (13 Nov 2015) - [Sebastian Pohlschmidt brought this change] openssl: Free modules on cleanup Curl_ossl_init calls OPENSSL_load_builtin_modules() but Curl_ossl_cleanup doesn't make a call to free these modules. Bug: https://github.com/bagder/curl/issues/526 Steve Holme (13 Nov 2015) - symbols-in-versions: Added new CURLOPTTYPE_STRINGPOINT alias ...following commit aba281e762 to fix test 1119. Daniel Stenberg (13 Nov 2015) - curl: mark two more options strings for --libcurl output - typecheck-gcc.h: add some missing string types Also sorted that list alphabetically - curl.h: introducing the STRINGPOINT alias As an alias for OBJECTPOINT. Provided to allow us to grep for all string options easier. - cleanup: general removal of TODO (and similar) comments They tend to never get updated anyway so they're frequently inaccurate and we never go back to revisit them anyway. We document issues to work on properly in KNOWN_BUGS and TODO instead. - ftplistparser: remove empty function - openssl: remove #if check for 0.9.7 for ENGINE_load_private_key - openssl: all supported versions have X509_STORE_set_flags Simplify by removing #ifdefs and macros - openssl: remove 0.9.3 check - openssl: remove #ifdefs for < 0.9.5 support We only support >= 0.9.7 - lib/vtls/openssl: remove unused traces of yassl ifdefs Dan Fandrich (12 Nov 2015) - [dfandrich brought this change] unit1603: Demote hash mismatch failure to a warning The hashes can vary between architectures (e.g. Sparc differs from x86_64). This is not a fatal problem but just reduces the coverage of these white-box tests, as the assumptions about into which hash bucket each key falls are no longer valid. - [dfandrich brought this change] unit1603: Added unit tests for hash functions - [dfandrich brought this change] unit1602: Fixed failure in torture test Steve Holme (12 Nov 2015) - sasl: Re-introduced XOAUTH2 in the default enabled authentication mechanism Following the fix in commit d6d58dd558 it is necessary to re-introduce XOAUTH2 in the default enabled authentication mechanism, which was removed in commit 7b2012f262, otherwise users will have to specify AUTH=XOAUTH2 in the URL. Note: OAuth 2.0 will only be used when the bearer is specified. - [Stefan Bühler brought this change] sasl_sspi: fix identity memory leak in digest authentication - [Stefan Bühler brought this change] sasl_sspi: fixed unicode build for digest authentication Closes #525 - oauth2: Re-factored OAuth 2.0 state variable - sasl: Don't choose OAuth 2.0 if mechanism not advertised Regression from commit 9e8ced9890 which meant if --oauth2-bearer was specified but the SASL mechanism wasn't supported by the server then the mechanism would be chosen. Daniel Stenberg (12 Nov 2015) - runtests: more compact "System characteristics" output - no point in repeating curl features that is already listed as features from the curl -V output - remove the port numbers/unix domain path from the output unless verbose is used, as that is rarely interesting to users. - runtests: rename conditional curl-features to $has_[name] Steve Holme (11 Nov 2015) - oauth2: Introduced support for host and port details Added support to the OAuth 2.0 message function for host and port, in order to accommodate the official OAUTHBEARER SASL mechanism which is to be added shortly. - curl_setup.h: Removed duplicate CURL_DISABLE_RTSP when HTTP_ONLY defined - cmake: Add missing feature macros in config header (Part 2) In addition to commit a215381c94 added the RTSP, RTMP and SMB protocols. Daniel Stenberg (10 Nov 2015) - [Douglas Creager brought this change] cmake: Add missing feature macros in config header The curl_config.h file can be generated either from curl_config.h.cmake or curl_config.h.in, depending on whether you're building using CMake or the autotools. The CMake template header doesn't include entries for all of the protocols that you can disable, which (I think) means that you can't actually disable those protocols when building via CMake. Closes #523 - [Douglas Creager brought this change] BoringSSL: Work with stricter BIO_get_mem_data() BoringSSL implements `BIO_get_mem_data` as a function, instead of a macro, and expects the output pointer to be a `char **`. We have to add an explicit cast to grab the pointer as a `const char **`. Closes #524 - http2: rectify the http2 version #if check We need 1.0.0 or later. Also verified by configure. Steve Holme (9 Nov 2015) - oauth2: Don't use XAUTH2 in OAuth 2.0 function name - oauth2: Don't use XOAUTH2 in OAuth 2.0 variables - oauth2: Use OAuth 2.0 rather than XOAUTH2 in comments When referring to OAuth 2.0 we should use the official name rather the SASL mechanism name. Daniel Stenberg (9 Nov 2015) - imap: avoid freeing constant string The fix in 1a614c6c3 was wrong and would leed to free() of a fixed string. Pointed-out-by: Kamil Dudka - ROADMAP: remove two items already done - RELEASE-NOTES: synced with 2200bf62054 Jay Satiro (9 Nov 2015) - acinclude: Remove check for 16-bit curl_off_t Because it's illogical to check for a 16-bit curl_off_t. Ref: https://github.com/bagder/curl/issues/425#issuecomment-154964205 Dan Fandrich (8 Nov 2015) - tool: Fixed a memory leak on OOM introduced in 19cb0c4a Steve Holme (8 Nov 2015) - [Justin Ehlert brought this change] imap: Don't check for continuation when executing a CUSTOMREQUEST Bug: https://github.com/bagder/curl/issues/486 Closes https://github.com/bagder/curl/pull/487 Daniel Stenberg (7 Nov 2015) - imap: checksrc: remove space after while before paren - checksrc.whitelist: "missing space after close paren" ... when it was within a string! Steve Holme (7 Nov 2015) - opts: Corrected TLS protocols list to include POP3S rather than POP3 - imap: Quote other 'atom-specials' and not just the space character Closes #517 - imap: Fixed double quote in LIST command when mailbox contains spaces Daniel Stenberg (6 Nov 2015) - imap: fix compiler warning imap.c:657:13: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] Steve Holme (6 Nov 2015) - imap: Don't call imap_atom() when no mailbox specified in LIST command Daniel Stenberg (6 Nov 2015) - curl.1: remove the overlap --range example ... it is just weird to include by default even if it still works. - tftp tests: verify sent options too The tftpd test server now logs all received options and thus all TFTP test cases need to match them exactly. Extended test 283 to use and verify --tftp-blksize. Jay Satiro (6 Nov 2015) - getinfo: CURLINFO_ACTIVESOCKET: fix bad socket value - Set user info param to the socket returned by Curl_getconnectinfo, regardless of if the socket is bad. Effectively this means the user info param now will receive CURL_SOCKET_BAD instead of -1 on bad socket. - Remove incorrect comments. CURLINFO_ACTIVESOCKET is documented to write CURL_SOCKET_BAD to user info param but prior to this change it wrote -1. Bug: https://github.com/bagder/curl/pull/518 Reported-by: Marcel Raad Patrick Monnerat (5 Nov 2015) - curl_ntlm_core: fix 2 curl_off_t constant overflows. - os400: adjust specific code to support new options. Daniel Stenberg (2 Nov 2015) - [Lauri Kasanen brought this change] rawstr: Speed up Curl_raw_toupper by 40% Rationale: when starting up a curl-using app, all cookies from the jar are checked against each other. This was causing a startup delay in the Fifth browser. All tests pass. Signed-off-by: Lauri Kasanen - http redirects: %-encode bytes outside of ascii range Apparently there are sites out there that do redirects to URLs they provide in plain UTF-8 or similar. Browsers and wget %-encode such headers when doing a subsequent request. Now libcurl does too. Added test 1138 to verify. Closes #473 - RELEASE-NOTES: synced with cba5bc585410 - symbols-in-version: add all CURL_HTTPPOST_* symbols - formadd: support >2GB files on windows Closes #425 - curl.h: s/HTTPPOST_/CURL_HTTPOST_ Fixes a name space pollution at the cost of programs using one of these defines will no longer compile. However, the vast majority of libcurl programs that do multipart formposts use curl_formadd() to build this list. Closes #506 - mbedtls: fix "Structurally dead code" CID 1332129 - mbedtls: fix "Logically dead code" CID 1332128 - Revert "openssl: engine: remove double-free" This reverts commit 370ee919b37cc9a46c36428b2bb1527eae5db2bd. Issue #509 has all the details but it was confirmed that the crash was not due to this, so the previous commit was wrong. - curl.1: -E: s/private certificate/client certificate ... as the certificate is strictly speaking not private. Reported-by: John Levon - openssl: engine: remove double-free After a successful call to SSL_CTX_use_PrivateKey(), we must not call EVP_PKEY_free() on the key. Reported-by: nased0 Closes #509 Jay Satiro (27 Oct 2015) - socks: Fix incorrect port numbers in failed connect messages Daniel Stenberg (26 Oct 2015) - DISTRO-DILEMMA: removed Out of date and not kept accurate. It was sort of a problem of the past anyway. - [xiangbin li brought this change] MacOSX-Framework: sdk regex fix for sdk 10.10 and later closes #507 Jay Satiro (24 Oct 2015) - build: Fix support for PKG_CONFIG - Allow the user to use PKG_CONFIG but not PKGCONFIG. Background: Last week in 14d5a86 a change was made to allow the user to set the PKGCONFIG variable. Today in 72d99f2 I supplemented that to allow the more common PKG_CONFIG as an alternative if PKGCONFIG is not set. Neither of those changes worked as expected because PKGCONFIG is occasionally reset in configure and by the CURL_CHECK_PKGCONFIG macro. Instead in this commit I take the approach that the user may set PKG_CONFIG only. - build: Fix mingw ssl gdi32 order - If mingw ssl make sure -lgdi32 comes after ssl libs - Allow PKG_CONFIG to set pkg-config location and options Bug: https://github.com/bagder/curl/pull/501 Reported-by: Kang Lin Daniel Stenberg (23 Oct 2015) - RELEASE-NOTES: synced with 03b6e078163f - polarssl/mbedtls: fix name space pollution Global private symbols MUST start with Curl_! - [Dmitry S. Baikov brought this change] mbedTLS: THREADING_SUPPORT compilation fix Closes #505 - test1137: verify --ignore-content-length for FTP - curl.1: --ignore-content-length now works for FTP too - [Kurt Fankhauser brought this change] ftp: allow CURLOPT_IGNORE_CONTENT_LENGTH to ignore size This allows FTP transfers with growing (or shrinking) files without causing a transfer error. Closes #480 - CURLOPT_STREAM_WEIGHT.3: call argument 'weight' too ... and add a little example of what the weight actually means. "Relative proportion of bandwidth". - http2: add stream options to dist and curl_easy_setopt.3 - http2: s/priority/weight - http2: on_frame_recv: trust the conn/data input Removed wrong assert()s The 'conn' passed in as userdata can be used and there can be other sessionhandles ('data') than the single one this checked for. - http2: added three stream prio/deps options CURLOPT_STREAM_DEPENDS CURLOPT_STREAM_DEPENDS_E CURLOPT_STREAM_PRIORITY - RELEASE-NOTES: synced with ace68fdc0cfed83d - [m-gardet brought this change] mbedtls:new profile with RSA min key len = 1024. Closes #502 - checksrc: add crude // detection Jay Satiro (21 Oct 2015) - [Gisle Vanem brought this change] build: fix for MSDOS/djgpp - Add a VPATH-statement for the vtls/*.c files. - Due to 'vtls/*.c', remove that subdir part from $(OBJECTS). Daniel Stenberg (20 Oct 2015) - copyrights: update Gisle Vanem's email - vtls: fix compiler warning for TLS backends without sha256 ... noticed with mbedTLS. - [Jonas Minnberg brought this change] vtls: added support for mbedTLS closes #496 Jay Satiro (19 Oct 2015) - [Javier G. Sogo brought this change] cmake: Fix for add_subdirectory(curl) use-case - Use CURL_BINARY_DIR instead of CMAKE_BINARY_DIR. When including CURL using add_subdirectory the variables CMAKE_BINARY_DIR and CURL_BINARY_DIR hold different paths. Closes https://github.com/bagder/curl/pull/488 Closes https://github.com/bagder/curl/pull/498 Daniel Stenberg (18 Oct 2015) - RELEASE-NOTES: synced with 4c773bcb474e - tests/FILEFORMAT: mention PSL as a valid feture to check for For example in test 1136 - teste1136: only run when PSL is enabled - curl: slist_wc: remove curl_memory.h inclusion ... that's for the library only. - configure: add PSL to the list of features ... to make test 1014 work again after e77b5b7453. - [Daniel Hwang brought this change] tool: Generate easysrc with last cache linked-list Using a last cache linked-list improves the performance of easysrc generation. Bug: https://github.com/bagder/curl/issues/444 Ref: https://github.com/bagder/curl/issues/429 Closes #452 - [Tim Rühsen brought this change] cookies: Add support for Mozilla's Publix Suffix List Use libpsl to check the domain value of Set-Cookie headers (and cookie jar entries) for not being a Publix Suffix. The configure script checks for "libpsl" by default. Disable the check with --without-libpsl. Ref: https://publicsuffix.org/ Ref: https://github.com/publicsuffix/list Ref: https://github.com/rockdaboot/libpsl - [Richard Hosking brought this change] curlbuild.h: Fix non-configure compiling to mips and sh4 targets - [Anders Bakken brought this change] http2: Don't pass unitialized name+len pairs to nghttp2_submit_request bug introduced by 18691642931e5c7ac8af83ac3a84fbcb36000f96. Closes #493 Dan Fandrich (16 Oct 2015) - test1601: fix compilation with --enable-debug and --disable-crypto-auth Daniel Stenberg (16 Oct 2015) - multi: fix off-by-one finit[] array size introduced in c6aedf680f6. It needs to be CURLM_STATE_LAST big since it must hande the range 0 .. CURLM_STATE_MSGSENT (18) and CURLM_STATE_LAST is 19 right now. Reported-by: Dan Fandrich Bug: http://curl.haxx.se/mail/lib-2015-10/0069.html - fread_func: move callback pointer from set to state struct ... and assign it from the set.fread_func_set pointer in the Curl_init_CONNECT function. This A) avoids that we have code that assigns fields in the 'set' struct (which we always knew was bad) and more importantly B) it makes it impossibly to accidentally leave the wrong value for when the handle is re-used etc. Introducing a state-init functionality in multi.c, so that we can set a specific function to get called when we enter a state. The Curl_init_CONNECT is thus called when switching to the CONNECT state. Bug: https://github.com/bagder/curl/issues/346 Closes #346 Dan Fandrich (14 Oct 2015) - test1531: case the size to fix the test on non-largefile builds Daniel Stenberg (13 Oct 2015) - acinclude: remove PKGCONFIG override ... and allow it to get set by a caller easier. Reported-by: Rainer Jung Bug: http://curl.haxx.se/mail/lib-2015-10/0035.html Dan Fandrich (12 Oct 2015) - docs/INSTALL: Updated example minimal binary sizes Daniel Stenberg (11 Oct 2015) - [Erik Johansson brought this change] openssl: Fix set up of pkcs12 certificate verification chain sk_X509_pop will decrease the size of the stack which means that the loop would end after having added only half of the certificates. Also make sure that the X509 certificate is freed in case SSL_CTX_add_extra_chain_cert fails. - ntlm: error out without 64bit support as the code needs it It makes it a clearer message for developers reaching that point without the necessary support. Thanks-by: Jay Satiro Closes #78 - curl_global_init: set the memory function pointers correct follow-up from 6f8ecea0 - curl_global_init_mem: set function pointers before doing init ... as in the polarssl TLS backend for example it uses memory functions. Jay Satiro (9 Oct 2015) - http2: Fix http2_recv to return -1 if recv returned -1 If the underlying recv called by http2_recv returns -1 then that is the value http2_recv returns to the caller. Daniel Stenberg (8 Oct 2015) - [Svyatoslav Mishyn brought this change] curl_easy_recv.3: CURLINFO_LASTSOCKET => CURLINFO_ACTIVESOCKET Closes #479 - [Svyatoslav Mishyn brought this change] curl_easy_send.3: CURLINFO_LASTSOCKET => CURLINFO_ACTIVESOCKET - [Svyatoslav Mishyn brought this change] CURLOPT_CONNECT_ONLY.3: CURLINFO_LASTSOCKET => CURLINFO_ACTIVESOCKET - CURLOPT_CERTINFO.3: fix reference to CURLINFO_CERTINFO - ntlm: get rid of unconditional use of long long ... since some compilers don't have it and instead use other types, such as __int64. Reported by: gkinseyhpw Closes #478 Jay Satiro (8 Oct 2015) - [Anders Bakken brought this change] des: Fix header conditional for Curl_des_set_odd_parity Follow up to 613e502. Daniel Stenberg (7 Oct 2015) - configure: build silently by default 'make V=1' will make the build verbose like before - bump: start climbing toward 7.46.0 - RELEASE-PROCEDURE: add the github HTTPS download step Version 7.45.0 (7 Oct 2015) Daniel Stenberg (7 Oct 2015) - THANKS: 19 new contributors from the 7.45.0 announcement - RELEASE-NOTES: synced with 69ea57970080 Jay Satiro (4 Oct 2015) - getinfo: Fix return code for unknown CURLINFO options - If a CURLINFO option is unknown return CURLE_UNKNOWN_OPTION. Prior to this change CURLE_BAD_FUNCTION_ARGUMENT was returned on unknown. That return value is contradicted by the CURLINFO option documentation which specifies a return of CURLE_UNKNOWN_OPTION on unknown. - [rouzier brought this change] hiperfifo: fix the pointer passed to WRITEDATA Closes https://github.com/bagder/curl/pull/471 - [Maksim Stsepanenka brought this change] tool_setopt: fix c_escape truncated octal Closes https://github.com/bagder/curl/pull/469 Daniel Stenberg (1 Oct 2015) - [Orange Tsai brought this change] gopher: don't send NUL byte Closes #466 Jay Satiro (29 Sep 2015) - runtests: Fix pid check in checkdied Because the 'not' operator has a very low precedence and as a result the entire statement was erroneously negated and could never be true. Daniel Stenberg (30 Sep 2015) - [Thorsten Schöning brought this change] win32: make recent Borland compilers use long long - RELEASE-NOTES: synced with 69b89050d4 Jay Satiro (28 Sep 2015) - [Michael Kalinin brought this change] openssl: Fix algorithm init - Change algorithm init to happen after OpenSSL config load. Additional algorithms may be available due to the user's config so we initialize the algorithms after the user's config is loaded. Bug: https://github.com/bagder/curl/issues/447 Reported-by: Denis Feklushkin - [Svyatoslav Mishyn brought this change] docs: fix unescaped '\n' in man pages Closes https://github.com/bagder/curl/pull/459 Daniel Stenberg (27 Sep 2015) - http2: set TCP_NODELAY unconditionally For a single-stream download from localhost, we managed to increase transfer speed from 1.6MB/sec to around 400MB/sec, mostly because of this single fix. - http2: avoid superfluous Curl_expire() calls ... only call it when there is data arriving for another handle than the one that is currently driving it. Improves single-stream download performance quite a lot. Thanks-to: Tatsuhiro Tsujikawa Bug: http://curl.haxx.se/mail/lib-2015-09/0097.html - readwrite_data: set a max number of loops ... as otherwise a really fast pipe can "lock" one transfer for some protocols, like with HTTP/2. - [Sergei Nikulov brought this change] CI: Added AppVeyor-CI for curl Closes #439 - FTP: fix uploading ASCII with unknown size ... don't try to increase the supposed file size on newlines if we don't know what file size it is! Patch-by: lzsiga - [Tatsuhiro Tsujikawa brought this change] build: fix failures with -Wcast-align and -Werror Closes #457 - [Tatsuhiro Tsujikawa brought this change] curl-confopts.m4: Add missing ')' ... for CURL_CHECK_OPTION_RT Closes #456 Jay Satiro (25 Sep 2015) - curl_easy_getinfo.3: Add brief description for each CURLINFO Daniel Stenberg (23 Sep 2015) - [Jakub Zakrzewski brought this change] CMake: Ensure discovered include dirs are considered ...during header checks. Otherwise some following header tests (incorrectly) fail. Closes #436 - [Jakub Zakrzewski brought this change] CMake: Put "winsock2.h" before "windows.h" during configure checks "windows.h" includes "winsock.h" what causes many redefinition errors if "winsock2.h" is included afterwards and can cause build to fail. - tests: disable 1510 due to CI-problems on github - [Mike Crowe brought this change] gnutls: Report actual GnuTLS error message for certificate errors If GnuTLS fails to read the certificate then include whatever reason it provides in the failure message reported to the client. Signed-off-by: Mike Crowe - RELEASE-NOTES: synced with 6b56901b56e - [Mike Crowe brought this change] gnutls: Support CURLOPT_KEYPASSWD The gnutls vtls back-end was previously ignoring any password set via CURLOPT_KEYPASSWD. Presumably this was because gnutls_certificate_set_x509_key_file did not support encrypted keys. gnutls now has a gnutls_certificate_set_x509_key_file2 function that does support encrypted keys. Let's determine at compile time whether the available gnutls supports this new function. If it does then use it to pass the password. If it does not then emit a helpful diagnostic if a password is set. This is preferable to the previous behaviour of just failing to read the certificate without giving a reason in that case. Signed-off-by: Mike Crowe - CURLINFO_TLS_SESSION: always return backend info ... even for those that don't support providing anything in the 'internals' struct member since it offers a convenient way for applications to figure this out. - [Daniel Hwang brought this change] tool: remove redundant libcurl check The easysrc generation is run only when --libcurl is initialized. Ref: https://github.com/bagder/curl/issues/429 Closes #448 - [Richard van den Berg brought this change] CURLOPT_PROXY.3: A proxy given as env variable gets no special treatment Closes #449 - TODO: 5.7 More compressions Like for example brotli, as being implemented in Firefox now. Jay Satiro (21 Sep 2015) - tool_operate: Don't call easysrc cleanup unless --libcurl - Review of 4d95491. The author changed it so easysrc only initializes when --libcurl but did not do the same for the call to easysrc cleanup. Ref: https://github.com/bagder/curl/issues/429 Daniel Stenberg (20 Sep 2015) - [Viktor Szakats brought this change] CURLOPT_PINNEDPUBLICKEY.3: replace test.com with example.com closes #443 - KNOWN_BUGS: 91 "curl_easy_perform hangs with imap and PolarSSL" Closes #334 - KNOWN_BUGS: add link to #85 - tests: disable 1801 until fixed It is unreliable and causes CI problems on github Closes #380 - RELEASE-NOTES: synced with 4d95491636ee - [Daniel Lee Hwang brought this change] tool: generate easysrc only on --libcurl Code should only be generated when --libcurl is used. Bug: https://github.com/bagder/curl/issues/429 Reported-by: @greafhe, Jay Satiro Closes #429 Closes #442 Jay Satiro (19 Sep 2015) - vtls: Change designator name for server's pubkey hash - Change the designator name we use to show the base64 encoded sha256 hash of the server's public key from 'pinnedpubkey' to 'public key hash'. Though the server's public key hash is only shown when comparing pinned public key hashes, the server's hash may not match one of the pinned. Daniel Stenberg (19 Sep 2015) - [Isaac Boukris brought this change] NTLM: Reset auth-done when using a fresh connection With NTLM a new connection will always require authentication. Fixes #435 - [Daniel Hwang brought this change] ssl: add server cert's "sha256//" hash to verbose Add a "pinnedpubkey" section to the "Server Certificate" verbose Bug: https://github.com/bagder/curl/issues/410 Reported-by: W. Mark Kubacki Closes #430 Closes #410 - [Jakub Zakrzewski brought this change] openldap: only part of LDAP query results received Introduced with commit 65d141e6da5c6003a1592bbc87ee550b0ad75c2f Closes #440 - [Alessandro Ghedini brought this change] openssl: don't output certinfo data - [Alessandro Ghedini brought this change] openssl: refactor certificate parsing to use OpenSSL memory BIO Fixes #427 Kamil Dudka (18 Sep 2015) - nss: prevent NSS from incorrectly re-using a session Without this workaround, NSS re-uses a session cache entry despite the server name does not match. This causes SNI host name to differ from the actual host name. Consequently, certain servers (e.g. github.com) respond by 400 to such requests. Bug: https://bugzilla.mozilla.org/1202264 - nss: check return values of NSS functions Daniel Stenberg (17 Sep 2015) - CURLOPT_PINNEDPUBLICKEY.3: mention error code - openssl: build with < 0.9.8 ... without sha256 support and no define saying so. Reported-by: Rajkumar Mandal - libcurl-errors.3: add two missing error codes CURLE_SSL_PINNEDPUBKEYNOTMATCH and CURLE_SSL_INVALIDCERTSTATUS Jay Satiro (14 Sep 2015) - CURLOPT_PINNEDPUBLICKEY.3: Improve pubkey extraction example - Show how a certificate can be obtained using OpenSSL. Bug: https://github.com/bagder/curl/pull/430 Reported-by: Daniel Hwang Daniel Stenberg (13 Sep 2015) - http2: removed unused function - CURLINFO_ACTIVESOCKET.3: mention it replaces *LASTSOCKET - opts: add CURLINFO_* man pages to dist - opts: 19 more CURLINFO_* options made into stand-alone man pages - RELEASE-NOTES: synced with fad9604613 - curl: customrequest_helper: deal with NULL custom method - [Svyatoslav Mishyn brought this change] CURLOPT_FNMATCH_FUNCTION.3: fix typo s => is Closes #428 - curl: point out unnecessary uses of -X in verbose mode It uses 'Note:' as a prefix as opposed to the common 'Warning:' to take down the tone a bit. It adds a warning for using -XHEAD on other methods becasue that may lead to a hanging connection. Jay Satiro (10 Sep 2015) - curl_sspi: fix possibly undefined CRYPT_E_REVOKED Bug: https://github.com/bagder/curl/pull/411 Reported-by: Viktor Szakats - buildconf.bat: fix syntax error - [Benjamin Kircher brought this change] winbuild: run buildconf.bat if necessary - [Svyatoslav Mishyn brought this change] docs: fix argument type for CURLINFO_SPEED_*, CURLINFO_SIZE_* long => double Daniel Stenberg (8 Sep 2015) - [Sergei Nikulov brought this change] cmake: IPv6 : disable Unix header check on Windows platform Closes #409 - parse_proxy: reject illegal port numbers If the port number in the proxy string ended weirdly or the number is too large, skip it. Mostly as a means to bail out early if a "bare" IPv6 numerical address is used without enclosing brackets. Also mention the bracket requirement for IPv6 numerical addresses to the man page for CURLOPT_PROXY. Closes #415 Reported-by: Marcel Raad - FTP: do_more: add check for wait_data_conn in upload case In some timing-dependnt cases when a 4xx response immediately followed after a 150 when a STOR was issued, this function would wrongly return 'complete == true' while 'wait_data_conn' was still set. Closes #405 Reported-by: Patricia Muscalu - [Svyatoslav Mishyn brought this change] CURLOPT_TLSAUTH_TYPE.3: update description Closes #414 Closes #413 - [Svyatoslav Mishyn brought this change] CURLOPT_PATH_AS_IS.3: fix typo leavit => leaveit closes #412 - [Svyatoslav Mishyn brought this change] CURLINFO_SSL_VERIFYRESULT.3: add short description - [Svyatoslav Mishyn brought this change] CURLINFO_SSL_ENGINES.3: add short description - [Svyatoslav Mishyn brought this change] CURLINFO_CONTENT_LENGTH_UPLOAD.3: replace "receive" with "get" for consistency - [Svyatoslav Mishyn brought this change] CURLINFO_REDIRECT_TIME.3: remove redundant '!' Kamil Dudka (4 Sep 2015) - Revert "has: generate the curl/has.h header" This reverts commit a60bde79f9adeb135d5c642a07f0d783fbfbbc25 I have pushed by mistake. Apologies for my incompetent use of the git repo! - nss: do not directly access SSL_ImplementedCiphers[] It causes dynamic linking issues at run-time after an update of NSS. Bug: https://lists.fedoraproject.org/pipermail/devel/2015-September/214117.html - [Daniel Stenberg brought this change] has: generate the curl/has.h header changed macro name, moved and renamed script to become docs/libcurl/has.pl, generate code that is checksrc compliant Daniel Stenberg (3 Sep 2015) - gitignore: ignore more generated VC Makefiles - projects/Windows/.gitignore: ignore generated files for release - http2: don't pass on Connection: headers RFC 7540 section 8.1.2.2 states: "An endpoint MUST NOT generate an HTTP/2 message containing connection-specific header fields; any message containing connection-specific header fields MUST be treated as malformed" Closes #401 - curl.1: update RFC references - CURLOPT_POSTREDIR.3: update RFC number and section - CURLOPT_FOLLOWLOCATION.3: mention methods for redirects and some general cleaning up - [Marcel Raad brought this change] inet_pton.c: Fix MSVC run-time check failure (2) This fixes another run-time check failure because of a narrowing cast on Visual C++. Closes #408 Jay Satiro (3 Sep 2015) - docs: Warn about any-domain cookies and multiple transfers - Warn that cookies without a domain are sent to any domain: CURLOPT_COOKIELIST, CURLOPT_COOKIEFILE, --cookie - Note that imported Set-Cookie cookies without a domain are no longer exported: CURLINFO_COOKIELIST, CURLOPT_COOKIEJAR, --cookie-jar Steve Holme (2 Sep 2015) - tool_sdecls.h: Fixed compilation warning from commit 4a889441d3 tool_sdecls.h:139 warning: comma at end of enumerator list Daniel Stenberg (2 Sep 2015) - opts: 8 more CURLINFO* options as stand-alone man pages - RELEASE-NOTES: synced with c764cb4add1a8 - man-pages: more SEE ALSO links - opts: more CURLINFO_* options as stand-alone man pages Steve Holme (31 Aug 2015) - sasl: Only define Curl_sasl_digest_get_pair() when CRYPTO_AUTH enabled Introduced in commit 59f3f92ba6 this function is only implemented when CURL_DISABLE_CRYPTO_AUTH is not defined. As such we shouldn't define the function in the header file either. - sasl: Updated SPN variables and comments for consistency In places the "host name" and "realm" variable was referred to as "instance" whilst in others it was referred to as "host". Daniel Stenberg (30 Aug 2015) - configure: check for HMAC_Update in openssl Turns out HMAC_Init is now deprecated in openssl master (and I spelled HMAC_Init_ex wrong in previous commit) Steve Holme (30 Aug 2015) - win32: Use DES_set_odd_parity() from OpenSSL/BoringSSL by default Set HAVE_DES_SET_ODD_PARITY when using OpenSSL/BoringSSL as native Windows builds don't use the autoconf tools. - des: Fixed compilation warning from commit 613e5022fe curl_ntlm_core.c:150: warning 'Curl_des_set_odd_parity' undefined; assuming extern returning int - buildconf.bat: Fixed double blank line in 'curl manual' warning output - makefiles: Added our standard copyright header But kept the original author, when they were specified in a comment, as the initial copyright holder. Jay Satiro (29 Aug 2015) - CURLOPT_FILETIME.3: CURLINFO_FILETIME has its own manpage now Daniel Stenberg (29 Aug 2015) - CURLINFO_RESPONSE_CODE.3: added short description - opts: 7 initial CURLINFO_* options as stand-alone man pages - [Nikolai Kondrashov brought this change] libcurl.m4: Put braces around empty if body Put braces around empty "if" body in libcurl.m4 check to avoid warning: suggest braces around empty body in an 'if' statement and make it work with -Werror builds. Closes #402 - [Svyatoslav Mishyn brought this change] curl_easy_escape.3: escape '\n' Closes #398 - [Svyatoslav Mishyn brought this change] curl_easy_{escape,setopt}.3: fix example remove redundant '}' - [Sergei Nikulov brought this change] cmake: added Windows SSL support Closes #399 - curl: point out the conflicting HTTP methods if used It isn't always clear to the user which options that cause the HTTP methods to conflict so by spelling them out it should hopefully be easier to understand why curl complains. - curl: clarify that users can only specify one _METHOD_ - [Svyatoslav Mishyn brought this change] curl_easy_{escape,unescape}.3: "char *" vs. "const char *" Closes #395 Patrick Monnerat (24 Aug 2015) - os400: include new options in wrappers and update ILE/RPG binding. Daniel Stenberg (24 Aug 2015) - KNOWN_BUGS: #2, not reading a HEAD response-body is not a bug ... since HTTP is forbidden to return any such. - KNOWN_BUGS: #78 zero-length files is already fixed! - [Razvan Cojocaru brought this change] getinfo: added CURLINFO_ACTIVESOCKET This patch addresses known bug #76, where on 64-bit Windows SOCKET is 64 bits wide, but long is only 32, making CURLINFO_LASTSOCKET unreliable. Signed-off-by: Razvan Cojocaru - http2: remove dead code Leftovers from when we removed the private socket hash. Coverity CID 1317365, "Logically dead code" - ntlm: mark deliberate switch case fall-through Coverity CID 1317367, "Missing break in switch" - http2: on_frame_recv: get a proper 'conn' for the debug logging "Explicit null dereferenced (FORWARD_NULL)" Coverity CID 1317366 - RELEASE-NOTES: synced with 2acaf3c804 Dan Fandrich (23 Aug 2015) - tool: fix memory leak with --proto-default option Jay Satiro (22 Aug 2015) - [Nathaniel Waisbrot brought this change] CURLOPT_DEFAULT_PROTOCOL: added - Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default protocol for schemeless URLs. - Add new tool option --proto-default to expose CURLOPT_DEFAULT_PROTOCOL. In the case of schemeless URLs libcurl will behave in this way: When the option is used libcurl will use the supplied default. When the option is not used, libcurl will follow its usual plan of guessing from the hostname and falling back to 'http'. - runtests: Allow for spaces in server-verify curl custom path Daniel Stenberg (22 Aug 2015) - NTLM: recent boringssl brought DES_set_odd_parity back ... so improve the #ifdefs for using our local implementation. - configure: detect latest boringssl Since boringssl brought back DES_set_odd_parity again, it cannot be used to differentiate from boringssl. Using the OPENSSL_IS_BORINGSSL define seems better anyway. URL: https://android.googlesource.com/platform/external/curl/+/f551028d5caab29d4b4a4ae8c159c76c3cfd4887%5E!/ Original-patch-by: Bertrand Simonnet Closes #393 - configure: change functions to detect openssl (clones) ... since boringssl moved the former ones and the check started to fail. URL: https://android.googlesource.com/platform/external/curl/+/f551028d5caab29d4b4a4ae8c159c76c3cfd4887%5E!/ Original-patch-by: Bertrand Simonnet - [Alessandro Ghedini brought this change] openssl: handle lack of server cert when strict checking disabled If strict certificate checking is disabled (CURLOPT_SSL_VERIFYPEER and CURLOPT_SSL_VERIFYHOST are disabled) do not fail if the server doesn't present a certificate at all. Closes #392 - ftp: clear the do_more bit when the server has connected The multi state machine would otherwise go into the DO_MORE state after DO, even for the case when the FTP state machine had already performed those duties, which caused libcurl to get stuck in that state and fail miserably. This occured for for active ftp uploads. Reported-by: Patricia Muscalu - [Jactry Zeng brought this change] travis.yml: Add OS X testbot. - [Rémy Léone brought this change] travis: Upgrading to container based build http://docs.travis-ci.com/user/migrating-from-legacy Closes #388 - RELEASE-NOTES: synced with 14ff86256b13e - [Erik Janssen brought this change] rtsp: stop reading empty DESCRIBE responses Based-on-patch-by: Jim Hollinger - [Erik Janssen brought this change] rtsp: support basic/digest authentication - [Sam Roth brought this change] CURLMOPT_PUSHFUNCTION.3: fix argument types Closes #389 Closes #386 - [Marcel Raad brought this change] inet_pton.c: Fix MSVC run-time check failure Visual Studio complains with a message box: "Run-Time Check Failure #1 - A cast to a smaller data type has caused a loss of data. If this was intentional, you should mask the source of the cast with the appropriate bitmask. For example: char c = (i & 0xFF); Changing the code in this way will not affect the quality of the resulting optimized code." This is because only 'val' is cast to unsigned char, so the "& 0xff" has no effect. Closes #387 Jay Satiro (18 Aug 2015) - docs: Update the redirect protocols disabled by default - Clarify that FILE and SCP are disabled by default since 7.19.4 - Add that SMB and SMBS are disabled by default since 7.40.0 - Add CURLPROTO_SMBS to the list of protocols - gitignore: Sort for readability find . -name .gitignore -print0 | xargs -i -0 sort -o '{}' '{}' Daniel Stenberg (15 Aug 2015) - curl_easy_getinfo.3: fix superfluous space ... and changed "oriented" to "related" Closes #378 - CURLOPT_HTTP_VERSION.3: connection re-use goes before version - [Daniel Kahn Gillmor brought this change] curl.1: Document weaknesses in SSLv2 and SSLv3 Acknowledge that SSLv3 is also widely considered to be insecure. Also, provide references for people who want to know more about why it's insecure. Steve Holme (14 Aug 2015) - generate.bat: Added support for generating only the prerequisite files - generate.bat: Only call buildconf.bat if it exists - generate.bat: Fixed issues when ran in directories with special chars Daniel Stenberg (14 Aug 2015) - [Brad King brought this change] cmake: Fix CurlTests check for gethostbyname_r with 5 arguments Fix the check code to pass 5 arguments instead of 6. This typo was introduced by commit aebfd4cfbf (cmake: fix gethostby{addr,name}_r in CurlTests, 2014-10-31). Steve Holme (14 Aug 2015) - * buildconf.bat: Fixed issues when ran in directories with special chars Bug: https://github.com/bagder/curl/pull/379 Reported-by: Daniel Seither Jay Satiro (13 Aug 2015) - curl_global_init_mem.3: Stronger thread safety warning Bug: http://curl.haxx.se/mail/lib-2015-08/0016.html Reported-by: Eric Ridge Daniel Stenberg (12 Aug 2015) - [Svyatoslav Mishyn brought this change] curl_multi_add_handle.3: fix a typo "can not" => "cannot" closes #377 - [Alessandro Ghedini brought this change] docs: fix typos closes #376 - bump: start working toward 7.45.0 - THANKS: remove duplicate name - THANKS-filter: merge Todd's names - THANKS: 13 new contributors from the 7.44.0 RELEASE-NOTES Version 7.44.0 (11 Aug 2015) Daniel Stenberg (11 Aug 2015) - RELEASE-NOTES: synced with c75a1e775061 - [Svyatoslav Mishyn brought this change] curl_formget.3: correct return code Closes #375 - [Svyatoslav Mishyn brought this change] libcurl-tutorial.3: fix formatting Closes #374 - [Svyatoslav Mishyn brought this change] curl_easy_recv.3: fix formatting - [Anders Bakken brought this change] http2: discard frames with no SessionHandle Return 0 instead of NGHTTP2_ERR_CALLBACK_FAILURE if we can't locate the SessionHandle. Apparently mod_h2 will sometimes send a frame for a stream_id we're finished with. Use nghttp2_session_get_stream_user_data and nghttp2_session_set_stream_user_data to identify SessionHandles instead of a hash. Closes #372 - RELEASE-NOTES: synced with 9ee40ce2aba - [Viktor Szakats brought this change] build: refer to fixed libidn versions closes #371 - Revert "configure: disable libidn by default" This reverts commit e6749055d65398315fd77f5b5b8234c5552ac2d3. ... since libidn has since been fixed. - [Jakub Zakrzewski brought this change] CMake: s/HAVE_GSS_API/HAVE_GSSAPI/ to match header define Otherwise the build only pretended to use GSS-API Closes #370 - SFTP: fix range request off-by-one in size check Reported-by: Tim Stack Closes #359 - test46: update cookie expire time ... since it went old and thus was expired and caused the test to fail! Steve Holme (9 Aug 2015) - generate.bat: Use buildconf.bat for prerequisite file generation - buildconf.bat: Tidy up of comments after recent commits - buildconf.bat: Added full generation of src\tool_hugehelp.c Added support for generating the full man page based on code from generate.bat. - buildconf.bat: Added detection of groff, nroff, perl and gzip To allow for the full generation of tool_hugehelp.c added detection of the required programs - based on code from generate.bat. - buildconf.bat: Move DOS variable clean-up code to separate function Rather than duplicate future variables, during clean-up of both success and error conditions, use a common function that can be called by both. - RELEASE-NOTES: Synced with 39dcf352d2 - buildconf.bat: Added error messages on failure - buildconf.bat: Generate and clean files in the same order - buildconf.bat: Maintain compatibility with DOS based systems Commit f08e30d7bc broke compatibility with DOS and non Windows NT based versions of Windows due to the use of the setlocal command. Jay Satiro (9 Aug 2015) - CURLOPT_RESOLVE.3: Note removal support was added in 7.42 Bug: http://curl.haxx.se/mail/lib-2015-08/0019.html Reported-by: Inca R Steve Holme (8 Aug 2015) - checksrc.bat: Fixed error when missing *.c and *.h files File Not Found - checksrc.bat: Fixed incorrect 'lib\vtls' path check in commit 333c36b276 - checksrc.bat: Fixed error when [directory] isn't a curl source directory The system cannot find the file specified. - checksrc.bat: Added check for unknown arguments - scripts: Added missing comments - scripts: Always perform setlocal and endlocal calls in pairs Ensure that there isn't a mismatch between setlocal and endlocal calls, which could have happened due to setlocal being called after certain error conditions were checked for. - scripts: Allow -help to be specified in any argument Allow the -help command line argument to be specified in any argument and not just as the first. Daniel Stenberg (6 Aug 2015) - [juef brought this change] curl_multi_remove_handle.3: fix formatting closes #366 Steve Holme (6 Aug 2015) - README: Added notes about 'Running DLL based configurations' ...as well as a TODO for a future enhancement to the project files. Thanks-to: Jay Satiro - RELEASE-NOTES: Synced with cf8975387f - buildconf.bat: Synchronise no repository error with generate.bat - generate.bat: Added a check for the presence of a git repository - [Jay Satiro brought this change] build: Added wolfSSL configurations to VC10+ project files URL: https://github.com/bagder/curl/pull/174 - [Jay Satiro brought this change] build: Added wolfSSL build script for Visual Studio projects Added the wolfSSL build script, based on build-openssl.bat, as well as the property sheet and header file required for the upcoming additions to the Visual Studio project files. Daniel Stenberg (6 Aug 2015) - CHANGES: refer to the online changelog Suggested-by: mc0e - [Isaac Boukris brought this change] NTLM: handle auth for only a single request Currently when the server responds with 401 on NTLM authenticated connection (re-used) we consider it to have failed. However this is legitimate and may happen when for example IIS is set configured to 'authPersistSingleRequest' or when the request goes thru a proxy (with 'via' header). Implemented by imploying an additional state once a connection is re-used to indicate that if we receive 401 we need to restart authentication. Closes #363 Steve Holme (5 Aug 2015) - RELEASE-NOTES: Synced with 473807b95f - generate.bat: Use buildconf.bat for prerequisite file clean-up - buildconf.bat: Added support for file clean-up via -clean - buildconf.bat: Added progress output - buildconf.bat: Avoid using goto for file not in repository Daniel Stenberg (5 Aug 2015) - curl_slist_append.3: add error checking to the example Steve Holme (5 Aug 2015) - buildconf.bat: Added display of usage text with -help - buildconf.bat: Added exit codes for error handling - buildconf.bat: Added our standard copyright header - buildconf.bat: Use lower-case for commands and reserved keywords - generate.bat: Only clean prerequisite files when in ALL mode - generate.bat: Moved error messages out of sub-routines - generate.bat: More use of lower-case for commands and reserved keywords Daniel Stenberg (3 Aug 2015) - libcurl.3: fix a single typo Closes #361 - RELEASE-NOTES: synced with c4eb10e2f06f - SSH: three state machine fixups The SSH state machine didn't clear the 'rc' variable appropriately in a two places which prevented it from looping the way it should. And it lacked an 'else' statement that made it possible to erroneously get stuck in the SSH_AUTH_AGENT state. Reported-by: Tim Stack Closes #357 - curl_gssapi: remove 'const' to fix compiler warnings initialization discards 'const' qualifier from pointer target type - docs: formpost needs the full size at start of upload Closes #360 Steve Holme (1 Aug 2015) - sspi: Fix typo from left over from old code which referenced NTLM References to NTLM in the identity generation should have been removed in commit c469941293 but not all were. - win32: Fix compilation warnings from commit 40c921f8b8 connect.c:953:5: warning: initializer element is not computable at load time connect.c:953:5: warning: missing initializer for field 'dwMinorVersion' of 'OSVERSIONINFOEX' curl_sspi.c:97:5: warning: initializer element is not computable at load time curl_sspi.c:97:5: warning: missing initializer for field 'szCSDVersion' of 'OSVERSIONINFOEX' - schannel: Fix compilation warning from commit 7a8e861a56 schannel.c:1125:5: warning: missing initializer for field 'dwMinorVersion' of 'OSVERSIONINFOEX' [-Wmissing-field-initializers Daniel Stenberg (31 Jul 2015) - libcurl-thread.3: minor reformatting Jay Satiro (31 Jul 2015) - curl_global_init_mem.3: Warn threaded resolver needs thread safe funcs Bug: http://curl.haxx.se/mail/lib-2015-07/0149.html Reported-by: Eric Ridge - libcurl-thread.3: Warn memory functions must be thread safe Bug: http://curl.haxx.se/mail/lib-2015-07/0149.html Reported-by: Eric Ridge Steve Holme (31 Jul 2015) - RELEASE-NOTES: Synced with 8b1d00ac1a - INSTALL: Minor formatting correction in 'Legacy Windows and SSL' section ...as well as some rewording. Kamil Dudka (30 Jul 2015) - http: move HTTP/2 cleanup code off http_disconnect() Otherwise it would never be called for an HTTP/2 connection, which has its own disconnect handler. I spotted this while debugging where the http_disconnect() handler was called on an FTP session handle causing 'dnf' to crash. conn->data->req.protop of type (struct FTP *) was reinterpreted as type (struct HTTP *) which resulted in SIGSEGV in Curl_add_buffer_free() after printing the "Connection cache is full, closing the oldest one." message. A previously working version of libcurl started to crash after it was recompiled with the HTTP/2 support despite the HTTP/2 protocol was not actually used. This commit makes it work again although I suspect the root cause (reinterpreting session handle data of incompatible protocol) still has to be fixed. Otherwise the same will happen when mixing FTP and HTTP/2 connections and exceeding the connection cache limit. Reported-by: Tomas Tomecek Bug: https://bugzilla.redhat.com/1248389 Daniel Stenberg (30 Jul 2015) - [Viktor Szakats brought this change] ABI doc: use secure URL - ABI: remove the ascii logo and made the indent level to 1 - libcurl-multi.3: mention curl_multi_wait ... and some general rewordings to improve this docs. Reported-by: Tim Stack Closes #356 Steve Holme (30 Jul 2015) - maketgz: Fixed some VC makefiles missing from the release tarball VC7, VC11, VC12 and VC14 makefiles were missing from the release tarball. - RELEASE-NOTES: Synced with 2d7e165761 - build: Added VC14 project files to Makefile.am - build: Added VC14 project files Updates to Makefile.am for the generation of the project files in the tarball to follow. Jay Satiro (29 Jul 2015) - libcurl-thread.3: Clarify CURLOPT_NOSIGNAL takes long value 1L Steve Holme (28 Jul 2015) - generate.bat: Use lower-case for commands and reserved keywords Whilst there are no coding standards for the batch files used in curl, most tend to use lower-case for keywords and upper-case for variables. - build: Added initial VC14 support to generate.bat Visual Studio project files and updates to makefile.am to follow. - build: Fixed missing .opensdf files from VC10+ .gitignore files - build: Use $(ProjectName) macro for curl.exe and curld.exe filenames This wasn't possible with the old curlsrc project filenames, but like commit 2a615a2b64 and 11397eb6dd for libcurl use the built in Visual Studio macros for the output filenames. - build: Renamed curl src Visual Studio project files Following commit 957fcd9049 and in preparation for adding the VC14 project files renamed the curl source project files. Daniel Stenberg (28 Jul 2015) - [Jay Satiro brought this change] libcurl-thread.3: Revert to stricter handle wording .. also update formatting and add WinSSL and wolfSSL to the SSL/TLS handlers list. - [Jay Satiro brought this change] libcurl-thread.3: Consolidate thread safety info This is a new document to consolidate our thread safety information from several documents (curl-www:features, libcurl.3, libcurl-tutorial.3). Each document's section on multi-threading will now point to this one. Steve Holme (27 Jul 2015) - README: Corrected formatting for 'Legacy Windows and SSL' section ...as well as some wording. - build-openssl.bat: Added support for VC14 Daniel Stenberg (26 Jul 2015) - RELEASE-NOTES: synced with 0f645adc95390e8 - test1902: attempt to make the test more reliable Closes #355 - comment: fix comment about adding new option support Jay Satiro (25 Jul 2015) - build-openssl.bat: Show syntax if required args are missing Daniel Stenberg (26 Jul 2015) - TODO: improve how curl works in a windows console window Closes #322 for now - 1.11 minimize dependencies with dynamicly loaded modules Closes #349 for now Jay Satiro (25 Jul 2015) - tool_operate: Fix CURLOPT_SSL_OPTIONS for builds without HTTPS - Set CURLOPT_SSL_OPTIONS only if the tool enabled an SSL option. Broken by me several days ago in 172b2be. https://github.com/bagder/curl/commit/172b2be#diff-70b44ee478e58d4e1ddcf9c9a73d257b Bug: http://curl.haxx.se/mail/lib-2015-07/0119.html Reported-by: Dan Fandrich Daniel Stenberg (25 Jul 2015) - configure: check if OpenSSL linking wants -ldl To make it easier to link with static versions of OpenSSL, the configure script now checks if -ldl is needed for linking. Help-by: TJ Saunders - [Michael Kaufmann brought this change] HTTP: ignore "Content-Encoding: compress" Currently, libcurl rejects responses with "Content-Encoding: compress" when CURLOPT_ACCEPT_ENCODING is set to "". I think that libcurl should treat the Content-Encoding "compress" the same as other Content-Encodings that it does not support, e.g. "bzip2". That means just ignoring it. - [Marcel Raad brought this change] openssl: work around MSVC warning MSVC 12 complains: lib\vtls\openssl.c(1554): warning C4701: potentially uninitialized local variable 'verstr' used It's a false positive, but as it's normally not, I have enabled warning-as-error for that warning. - [Michał Fita brought this change] configure: add --disable-rt option This option disables any attempts in configure to create dependency on stuff requiring linking to librt.so and libpthread.so, in this case this means clock_gettime(CLOCK_MONOTONIC, &mt). We were in need to build curl which doesn't link libpthread.so to avoid the following bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16628. Kamil Dudka (23 Jul 2015) - http2: verify success of strchr() in http2_send() Detected by Coverity. Error: NULL_RETURNS: lib/http2.c:1301: returned_null: "strchr" returns null (checked 103 out of 109 times). lib/http2.c:1301: var_assigned: Assigning: "hdbuf" = null return value from "strchr". lib/http2.c:1302: dereference: Incrementing a pointer which might be null: "hdbuf". 1300| 1301| hdbuf = strchr(hdbuf, 0x0a); 1302|-> ++hdbuf; 1303| 1304| authority_idx = 0; Jay Satiro (22 Jul 2015) - Windows: Fix VerifyVersionInfo calls - Fix the VerifyVersionInfo calls, which we use to test for the OS major version, to also test for the minor version as well as the service pack major and minor versions. MSDN: "If you are testing the major version, you must also test the minor version and the service pack major and minor versions." https://msdn.microsoft.com/en-us/library/windows/desktop/ms725492.aspx Bug: https://github.com/bagder/curl/pull/353#issuecomment-123493098 Reported-by: Marcel Raad - [Marcel Raad brought this change] schannel: Replace deprecated GetVersion with VerifyVersionInfo Steve Holme (21 Jul 2015) - makefile: Added support for VC14 Patrick Monnerat (21 Jul 2015) - os400: ebcdic wrappers for new functions. Upgrade ILE/RPG bindings. - libcurl: VERSIONINFO update Addition of new procedures curl_pushheader_bynum and curl_pushheader_byname requires VERSIONINFO updating. - http2: satisfy external references even if http2 is not compiled in. Daniel Stenberg (20 Jul 2015) - http2: add stream != NULL checks for reliability They should not trigger, but in case of internal problems we at least avoid crashes this way. Jay Satiro (18 Jul 2015) - symbols-in-versions: Add new CURLSSLOPT_NO_REVOKE symbol - SSL: Add an option to disable certificate revocation checks New tool option --ssl-no-revoke. New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS. Currently this option applies only to WinSSL where we have automatic certificate revocation checking by default. According to the ssl-compared chart there are other backends that have automatic checking (NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at some later point. Bug: https://github.com/bagder/curl/issues/264 Reported-by: zenden2k - runtests: Allow for spaces in curl custom path .. also fix some typos in test's FILEFORMAT spec. - [David Woodhouse brought this change] ntlm_wb: Fix theoretical memory leak Static analysis indicated that my commit 9008f3d564 ("ntlm_wb: Fix hard-coded limit on NTLM auth packet size") introduced a potential memory leak on an error path, because we forget to free the buffer before returning an error. Fix this. Although actually, it never happens in practice because we never *get* here with state == NTLMSTATE_TYPE1. The state is always zero. That might want cleaning up in a separate patch. Reported-by: Terri Oda - strerror: Add CRYPT_E_REVOKED to SSPI error strings Kamil Dudka (14 Jul 2015) - libtest: call PR_Cleanup() on exit if NSPR is used This prevents valgrind from reporting possibly lost memory that NSPR uses for file descriptor cache and other globally allocated internal data structures. Reported-by: Štefan Kremeň Jay Satiro (14 Jul 2015) - [John Malmberg brought this change] openssl: VMS support for SHA256 setup-vms.h: More symbols for SHA256, hacks for older VAX openssl.h: Use OpenSSL OPENSSL_NO_SHA256 macro to allow building on VAX. openssl.c: Use OpenSSL version checks and OPENSSL_NO_SHA256 macro to allow building on VAX and 64 bit VMS. - examples: Fix typo in multi-single.c Daniel Stenberg (7 Jul 2015) - [Tatsuhiro Tsujikawa brought this change] http2: Fix memory leak in push header array Dan Fandrich (2 Jul 2015) - test2041: fixed line endings in protocol part - cyassl: fixed mismatched sha256sum function prototype Daniel Stenberg (1 Jul 2015) - [moparisthebest brought this change] SSL: Pinned public key hash support - examples: provide sections - [John Malmberg brought this change] OpenVMS: VMS Software, Inc now the supplier. setup-vms.h: Symbol case fixups submitted by Michael Steve build_gnv_curl_pcsi_desc.com: VSI aka as VMS Software, is now the supplier of new versions of VMS. The install kit needs to accept VSI as a producer. Jay Satiro (30 Jun 2015) - multi: Move http2 push function declarations to header end This change necessary for binary compatibility. Prior to this change test 1135 failed due to the order of functions. - symbols-in-versions: Add new http2 push symbols Prior to this change test 1119 failed due to the missing symbols. Daniel Stenberg (30 Jun 2015) - RELEASE-NOTES: synced with e6749055d653 - configure: disable libidn by default For security reasons, until there is a fix. Bug: http://curl.haxx.se/mail/lib-2015-06/0143.html Reported-by: Gustavo Grieco, Feist Josselin - SSL-PROBLEMS: mention WinSSL problems in WinXP - CODE_OF_CONDUCT.md: added Just to underscore how we treat each other in this project. Nothing new really, but could be useful for newcomers and outsiders to see our values. - tool_header_cb: fflush the header stream Flush the header stream when -D is used so that they are sent off earlier. Bug: https://github.com/bagder/curl/issues/324 Reported-by: Cédric Connes - [Roger Leigh brought this change] tests: Distribute CMakeLists.txt files in subdirectories - CURLOPT_FAILONERROR.3: mention that it closes the connection Reported-by: bemoody Bug: https://github.com/bagder/curl/issues/325 - curl_multi_setopt.3: alpha sort the options - curl_multi_setopt.3: add the new push options - [Tatsuhiro Tsujikawa brought this change] http2: Use nghttp2 library error code for error return value - [Tatsuhiro Tsujikawa brought this change] http2: Harden header validation for curl_pushheader_byname Since we do prefix match using given header by application code against header name pair in format "NAME:VALUE", and VALUE part can contain ":", we have to careful about existence of ":" in header parameter. ":" should be allowed to match HTTP/2 pseudo-header field, and other use of ":" in header must be treated as error, and curl_pushheader_byname should return NULL. This commit implements this behaviour. - [Tatsuhiro Tsujikawa brought this change] CURLMOPT_PUSHFUNCTION.3: Remove unused variable - CURLMOPT_PUSHFUNCTION.3: added example - http2: curl_pushheader_byname now takes a const char * - http2-serverpush.c: example code - http2: free all header memory after the push callback - http2: init the pushed transfer properly - http2: fixed the header accessor functions for the push callback - http2: setup the new pushed stream properly - http2: initial implementation of the push callback - http2: initial HTTP/2 server push types/docs - test1531: verify POSTFIELDSIZE set after add_handle Following the fix made in 903b6e05565bf. - pretransfer: init state.infilesize here, not in add_handle ... to properly support that options are set to the handle after it is added to the multi handle. Bug: http://curl.haxx.se/mail/lib-2015-06/0122.html Reported-by: Stefan Bühler Jay Satiro (21 Jun 2015) - [Lior Kaplan brought this change] tool_help: fix --tlsv1 help text to use >= for TLSv1 - INSTALL: Advise use of non-native SSL for Windows <= XP Advise that WinSSL in versions <= XP will not be able to connect to servers that no longer support the legacy handshakes and algorithms used by those versions, and to use an alternate backend like OpenSSL instead. Bug: https://github.com/bagder/curl/issues/253 Reported-by: zenden2k Kamil Dudka (19 Jun 2015) - curl_easy_setopt.3: restore contents removed by mistake ... in commit curl-7_43_0-18-g570076e Daniel Stenberg (19 Jun 2015) - curl_easy_setopt.3: mention CURLOPT_PIPEWAIT Jay Satiro (18 Jun 2015) - cookie: Fix bug in export if any-domain cookie is present In 3013bb6 I had changed cookie export to ignore any-domain cookies, however the logic I used to do so was incorrect, and would lead to a busy loop in the case of exporting a cookie list that contained any-domain cookies. The result of that is worse though, because in that case the other cookies would not be written resulting in an empty file once the application is terminated to stop the busy loop. Dan Fandrich (18 Jun 2015) - FTP: fixed compiling with --disable-proxy, broken in b88f980a Daniel Stenberg (18 Jun 2015) - tool: always provide negotiate/kerberos options libcurl can still be built with it, even if the tool is not. Maintain independence! - TODO: Support IDNA2008 - [Viktor Szakats brought this change] Makefile.m32: add support for CURL_LDFLAG_EXTRAS It is similar to existing CURL_CFLAG_EXTRAS, but for extra linker option. - RTSP: removed another piece of dead code Coverity CID 1306668 - openssl: fix use of uninitialized buffer Make sure that the error buffer is always initialized and simplify the use of it to make the logic easier. Bug: https://github.com/bagder/curl/issues/318 Reported-by: sneis - examples: more descriptions - examples: add descriptions with Using this fixed format for example descriptions, we can generate a better list on the web site. - libcurl-errors.3: fix typo - curl_easy_setopt.3: option order doesn't matter - openssl: fix build with BoringSSL OPENSSL_load_builtin_modules does not exist in BoringSSL. Regression from cae43a1 - [Paul Howarth brought this change] openssl: Fix build with openssl < ~ 0.9.8f The symbol SSL3_MT_NEWSESSION_TICKET appears to have been introduced at around openssl 0.9.8f, and the use of it in lib/vtls/openssl.c breaks builds with older openssls (certainly with 0.9.8b, which is the latest older version I have to try with). - FTP: do the HTTP CONNECT for data connection blocking ** WORK-AROUND ** The introduced non-blocking general behaviour for Curl_proxyCONNECT() didn't work for the data connection establishment unless it was very fast. The newly introduced function argument makes it operate in a more blocking manner, more like it used to work in the past. This blocking approach is only used when the FTP data connecting through HTTP proxy. Blocking like this is bad. A better fix would make it work more asynchronously. Bug: https://github.com/bagder/curl/issues/278 - bump: start the journey toward 7.44.0 Jay Satiro (17 Jun 2015) - CURLOPT_ERRORBUFFER.3: Fix example, escape backslashes - CURLOPT_ERRORBUFFER.3: Improve example Version 7.43.0 (17 Jun 2015) Daniel Stenberg (17 Jun 2015) - RELEASE-NOTES: 7.43.0 release - THANKS: updated with 7.43.0 names - [Kamil Dudka brought this change] http: do not leak basic auth credentials on re-used connections CVE-2015-3236 This partially reverts commit curl-7_39_0-237-g87c4abb Reported-by: Tomas Tomecek, Kamil Dudka Bug: http://curl.haxx.se/docs/adv_20150617A.html - [Kamil Dudka brought this change] test2040: verify basic auth on re-used connections - SMB: rangecheck values read off incoming packet CVE-2015-3237 Detected by Coverity. CID 1299430. Bug: http://curl.haxx.se/docs/adv_20150617B.html Jay Satiro (17 Jun 2015) - schannel: schannel_recv overhaul This commit is several drafts squashed together. The changes from each draft are noted below. If any changes are similar and possibly contradictory the change in the latest draft takes precedence. Bug: https://github.com/bagder/curl/issues/244 Reported-by: Chris Araman %% %% Draft 1 %% - return 0 if len == 0. that will have to be documented. - continue on and process the caches regardless of raw recv - if decrypted data will be returned then set the error code to CURLE_OK and return its count - if decrypted data will not be returned and the connection has closed (eg nread == 0) then return 0 and CURLE_OK - if decrypted data will not be returned and the connection *hasn't* closed then set the error code to CURLE_AGAIN --only if an error code isn't already set-- and return -1 - narrow the Win2k workaround to only Win2k %% %% Draft 2 %% - Trying out a change in flow to handle corner cases. %% %% Draft 3 %% - Back out the lazier decryption change made in draft2. %% %% Draft 4 %% - Some formatting and branching changes - Decrypt all encrypted cached data when len == 0 - Save connection closed state - Change special Win2k check to use connection closed state %% %% Draft 5 %% - Default to CURLE_AGAIN in cleanup if an error code wasn't set and the connection isn't closed. %% %% Draft 6 %% - Save the last error only if it is an unrecoverable error. Prior to this I saved the last error state in all cases; unfortunately the logic to cover that in all cases would lead to some muddle and I'm concerned that could then lead to a bug in the future so I've replaced it by only recording an unrecoverable error and that state will persist. - Do not recurse on renegotiation. Instead we'll continue on to process any trailing encrypted data received during the renegotiation only. - Move the err checks in cleanup after the check for decrypted data. In either case decrypted data is always returned but I think it's easier to understand when those err checks come after the decrypted data check. %% %% Draft 7 %% - Regardless of len value go directly to cleanup if there is an unrecoverable error or a close_notify was already received. Prior to this change we only acknowledged those two states if len != 0. - Fix a bug in connection closed behavior: Set the error state in the cleanup, because we don't know for sure it's an error until that time. - (Related to above) In the case the connection is closed go "greedy" with the decryption to make sure all remaining encrypted data has been decrypted even if it is not needed at that time by the caller. This is necessary because we can only tell if the connection closed gracefully (close_notify) once all encrypted data has been decrypted. - Do not renegotiate when an unrecoverable error is pending. %% %% Draft 8 %% - Don't show 'server closed the connection' info message twice. - Show an info message if server closed abruptly (missing close_notify). Daniel Stenberg (16 Jun 2015) - [Paul Oliver brought this change] Fix typo in docs s/curret/current/ - [Viktor Szakats brought this change] docs: update URLs - RELEASE-NOTES: synced with f29f2cbd00dbe5f - [Viktor Szakats brought this change] README: use secure protocol for Git repository - [Viktor Szakats brought this change] HTTP2.md: use SSL/TLS IETF URLs - [Viktor Szakats brought this change] LICENSE-MIXING: update URLs * use SSL/TLS where available * follow permanent redirects - LICENSE-MIXING: refreshed - curl_easy_duphandle: see also *reset - rtsp_do: fix DEAD CODE "At condition p_request, the value of p_request cannot be NULL." Coverity CID 1306668. - security:choose_mech fix DEAD CODE warning ... by removing the "do {} while (0)" block. Coverity CID 1306669 - curl.1: netrc is in man section 5 - curl.1: small format fix use \fI-style instead of .BR for references - urldata: store POST size in state.infilesize too ... to simplify checking when PUT _or_ POST have completed. Reported-by: Frank Meier Bug: http://curl.haxx.se/mail/lib-2015-06/0019.html Dan Fandrich (14 Jun 2015) - test1530: added http to required features Jay Satiro (14 Jun 2015) - [Drake Arconis brought this change] build: Fix typo from OpenSSL 1.0.2 version detection fix - [Drake Arconis brought this change] build: Properly detect OpenSSL 1.0.2 when using configure - curl_multi_info_read.3: fix example formatting Daniel Stenberg (13 Jun 2015) - BINDINGS: there's a new R binding in town! - BINDINGS: added the Xojo binding Jay Satiro (11 Jun 2015) - [Joel Depooter brought this change] schannel: Add support for optional client certificates Some servers will request a client certificate, but not require one. This change allows libcurl to connect to such servers when using schannel as its ssl/tls backend. When a server requests a client certificate, libcurl will now continue the handshake without one, rather than terminating the handshake. The server can then decide if that is acceptable or not. Prior to this change, libcurl would terminate the handshake, reporting a SEC_I_INCOMPLETE_CREDENTIALS error. Daniel Stenberg (11 Jun 2015) - curl_easy_cleanup.3: provide more SEE ALSO - debug: remove http2 debug leftovers - VERSIONS: now using markdown - RELEASE-PROCEDURE: remove ascii logo at the top of file - INTERNALS: absorbed docs/LIBCURL-STRUCTS - INTERNALS: cat lib/README* >> INTERNALS and a conversion to markdown. Removed the lib/README.* files. The idea being to move toward having INTERNALS as the one and only "book" of internals documentation. Added a TOC to top of the document. Jay Satiro (8 Jun 2015) - openssl: LibreSSL and BoringSSL do not use TLS_client_method Although OpenSSL 1.1.0+ deprecated SSLv23_client_method in favor of TLS_client_method LibreSSL and BoringSSL didn't and still use SSLv23_client_method. Bug: https://github.com/bagder/curl/commit/49a6642#commitcomment-11578009 Reported-by: asavah@users.noreply.github.com Daniel Stenberg (9 Jun 2015) - RELEASE-NOTES: synced with 20ac3458068 - CURLOPT_OPENSOCKETFUNCTION: return error at once When CURL_SOCKET_BAD is returned in the callback, it should be treated as an error (CURLE_COULDNT_CONNECT) if no other socket is subsequently created when trying to connect to a server. Bug: http://curl.haxx.se/mail/lib-2015-06/0047.html - fopen.c: fix a few compiler warnings - [Ville Skyttä brought this change] docs: Spelling fixes - [Ville Skyttä brought this change] docs: man page indentation and syntax fixes Linus Nielsen (8 Jun 2015) - help: Add --proxy-service-name and --service-name to the --help output Jay Satiro (7 Jun 2015) - openssl: Fix verification of server-sent legacy intermediates - Try building a chain using issuers in the trusted store first to avoid problems with server-sent legacy intermediates. Prior to this change server-sent legacy intermediates with missing legacy issuers would cause verification to fail even if the client's CA bundle contained a valid replacement for the intermediate and an alternate chain could be constructed that would verify successfully. https://rt.openssl.org/Ticket/Display.html?id=3621&user=guest&pass=guest Daniel Stenberg (5 Jun 2015) - BINDINGS: update several URLs Stop linking to the curl.haxx.se anchor pages, they are usually only themselves pointers to the real page so better point there directly instead. - BINDINGS: the curl-rust binding - curl.h: add CURL_HTTP_VERSION_2 The protocol is named "HTTP/2" after all. It is an alias for the existing CURL_HTTP_VERSION_2_0 enum. - openssl: removed error string #ifdef ERR_error_string_n() was introduced in 0.9.6, no need to #ifdef anymore - openssl: removed USERDATA_IN_PWD_CALLBACK kludge Code for OpenSSL 0.9.4 serves no purpose anymore! - openssl: remove SSL_get_session()-using code It was present for OpenSSL 0.9.5 code but we only support 0.9.7 or later. - openssl: remove dummy callback use from SSL_CTX_set_verify() The existing callback served no purpose. - LIBCURL-STRUCTS: clarify for multiplexing Jay Satiro (3 Jun 2015) - cookie: Stop exporting any-domain cookies Prior to this change any-domain cookies (cookies without a domain that are sent to any domain) were exported with domain name "unknown". Bug: https://github.com/bagder/curl/issues/292 Daniel Stenberg (3 Jun 2015) - RELEASE-PROCEDURE: refreshed 'coming dates' Jay Satiro (2 Jun 2015) - curl_setup: Change fopen text macros to use 't' for MSDOS Bug: https://github.com/bagder/curl/pull/258#issuecomment-107915198 Reported-by: Gisle Vanem Daniel Stenberg (2 Jun 2015) - curl_multi_timeout.3: added example - curl_multi_perform.3: added example - curl_multi_info_read.3: added example - checksrc: detect fopen() for text without the FOPEN_* macros Follow-up to e8423f9ce150 with discussionis in https://github.com/bagder/curl/pull/258 This check scans for fopen() with a mode string without 'b' present, as it may indicate that an FOPEN_* define should rather be used. - curl_getdate.3: update RFC reference Jay Satiro (1 Jun 2015) - curl_setup: Add macros for FOPEN_READTEXT, FOPEN_WRITETEXT - Change fopen calls to use FOPEN_READTEXT instead of "r" or "rt" - Change fopen calls to use FOPEN_WRITETEXT instead of "w" or "wt" This change is to explicitly specify when we need to read/write text. Unfortunately 't' is not part of POSIX fopen so we can't specify it directly. Instead we now have FOPEN_READTEXT, FOPEN_WRITETEXT. Prior to this change we had an issue on Windows if an application that uses libcurl overrides the default file mode to binary. The default file mode in Windows is normally text mode (translation mode) and that's what libcurl expects. Bug: https://github.com/bagder/curl/pull/258#issuecomment-107093055 Reported-by: Orgad Shaneh Daniel Stenberg (1 Jun 2015) - http2-upload.c: use PIPEWAIT for playing HTTP/2 better - http2-download: check for CURLPIPE_MULTIPLEX properly Bug: http://curl.haxx.se/mail/lib-2015-06/0001.html Reported-by: Rafayel Mkrtchyan - [Isaac Boukris brought this change] HTTP-NTLM: fail auth on connection close instead of looping Bug: https://github.com/bagder/curl/issues/256 - 5.6 Refuse "downgrade" redirects - README.pingpong: removed - ROADMAP: remove HTTP/2 multiplexing - its here now - HTTP2.md: formatted properly - HTTP2: moved docs into docs/ and make it markdown - README.http2: refreshed and added multiplexing info - dist: add the http2 examples - http2 examples: clean up some comments - examples: added two programs doing multiplexed HTTP/2 - scripts: moved contributors.sh and contrithanks.sh into subdir - RELEASE-NOTES: synced with c005790ff1c0a - [Daniel Melani brought this change] openssl: typo in comment Jay Satiro (27 May 2015) - openssl: Use TLS_client_method for OpenSSL 1.1.0+ SSLv23_client_method is deprecated starting in OpenSSL 1.1.0. The equivalent is TLS_client_method. https://github.com/openssl/openssl/commit/13c9bb3#diff-708d3ae0f2c2973b272b811315381557 Daniel Stenberg (26 May 2015) - FAQ: How do I port libcurl to my OS? Jay Satiro (25 May 2015) - CURLOPT_COOKIELIST.3: Explain Set-Cookie without a domain Document that if Set-Cookie is used without a domain then the cookie is sent for any domain and will not be modified. Bug: http://curl.haxx.se/mail/lib-2015-05/0137.html Reported-by: Alexander Dyagilev Daniel Stenberg (25 May 2015) - [Tatsuhiro Tsujikawa brought this change] http2: Copy data passed in Curl_http2_switched into HTTP/2 connection buffer Previously, after seeing upgrade to HTTP/2, we feed data followed by upgrade response headers directly to nghttp2_session_mem_recv() in Curl_http2_switched(). But it turns out that passed buffer, mem, is part of stream->mem, and callbacks called by nghttp2_session_mem_recv() will write stream specific data into stream->mem, overwriting input data. This will corrupt input, and most likely frame length error is detected by nghttp2 library. The fix is first copy the passed data to HTTP/2 connection buffer, httpc->inbuf, and call nghttp2_session_mem_recv(). Jay Satiro (24 May 2015) - CURLOPT_COOKIE.3: Explain that the cookies won't be modified The CURLOPT_COOKIE doc says it "sets the cookie header explicitly in the outgoing request(s)." However there seems to be some user confusion about cookie modification. Document that the cookies set by this option are not modified by the cookie engine. Bug: http://curl.haxx.se/mail/lib-2015-05/0115.html Reported-by: Alexander Dyagilev - CURLOPT_COOKIELIST.3: Add example Dan Fandrich (24 May 2015) - testcurl.pl: use rel2abs to make the source directory absolute This function makes a platform-specific absolute path which uses backslashes on Windows. This form works when passing it on the command-line, as well as if the source is on another drive. - conncache: fixed memory leak on OOM (torture tests) Daniel Stenberg (24 May 2015) - perl: remove subdir, not touched in 9 years - log2changes.pl: moved to scripts/ - [Alessandro Ghedini brought this change] scripts: add zsh.pl for generating zsh completion Dan Fandrich (23 May 2015) - test1510: another flaky test Daniel Stenberg (22 May 2015) - security: fix "Unchecked return value" from sscanf() By (void) prefixing it and adding a comment. Did some minor related cleanups. Coverity CID 1299423. - security: simplify choose_mech Coverity CID 1299424 identified dead code because of checks that could never equal true (if the mechanism's name was NULL). Simplified the function by removing a level of pointers and removing the loop and array that weren't used. - RTSP: catch attempted unsupported requests better Replace use of assert with code that properly catches bad input at run-time even in non-debug builds. This flaw was sort of detected by Coverity CID 1299425 which claimed the "case RTSPREQ_NONE" was dead code. - share_init: fix OOM crash A failed calloc() would lead to NULL pointer use. Coverity CID 1299427. - parse_proxy: switch off tunneling if non-HTTP proxy non-HTTP proxy implies not using CURLOPT_HTTPPROXYTUNNEL Bug: http://curl.haxx.se/mail/lib-2015-05/0056.html Reported-by: Sean Boudreau - curl: fix potential NULL dereference Coverity CID 1299428: Dereference after null check (FORWARD_NULL) - http2: on_frame_recv: return early on stream 0 Coverity CID 1299426 warned about possible NULL dereference otherwise, but that would only ever happen if we get invalid HTTP/2 data with frames for stream 0. Avoid this risk by returning early when stream 0 is used. - http: removed self assignment Follow-up fix from b0143a2a33f0 Detected by coverity. CID 1299429 - [Tatsuhiro Tsujikawa brought this change] http2: Make HTTP Upgrade work This commit just add implicitly opened stream 1 to streams hash. Jay Satiro (22 May 2015) - strerror: Change SEC_E_ILLEGAL_MESSAGE description Prior to this change the description for SEC_E_ILLEGAL_MESSAGE was OS and language specific, and invariably translated to something not very helpful like: "The message received was unexpected or badly formatted." Bug: https://github.com/bagder/curl/issues/267 Reported-by: Michael Osipov - telnet: Fix read-callback change for Windows builds Refer to b0143a2 for more information on the read-callback change. Daniel Stenberg (21 May 2015) - CURLOPT_HTTPPROXYTUNNEL.3: only works with a HTTP proxy! Dan Fandrich (21 May 2015) - testcurl.pl: allow source to be in an arbitrary directory This way, the build directory can be located on an entirely different filesystem from the source code (e.g. a tmpfs). Daniel Stenberg (20 May 2015) - read_callback: move to SessionHandle from connectdata With many easy handles using the same connection for multiplexing, it is important we store and keep the transfer-oriented stuff in the SessionHandle so that callbacks and callback data work fine even when many easy handles share the same physical connection. - http2: show stream IDs in decimal It makes them easier to match output from the nghttpd test server. - [Tatsuhiro Tsujikawa brought this change] http2: Faster http2 upload Previously, when we send all given buffer in data_source_callback, we return NGHTTP2_ERR_DEFERRED, and nghttp2 library removes this stream temporarily for writing. This itself is good. If this is the sole stream in the session, nghttp2_session_want_write() returns zero, which means that libcurl does not check writeability of the underlying socket. This leads to very slow upload, because it seems curl only upload 16k something per 1 second. To fix this, if we still have data to send, call nghttp2_session_resume_data after nghttp2_session_send. This makes nghttp2_session_want_write() returns nonzero (if connection window still opens), and as a result, socket writeability is checked, and upload speed becomes normal. - [Dmitry Eremin-Solenikov brought this change] gtls: don't fail on non-fatal alerts during handshake Stop curl from failing when non-fatal alert is received during handshake. This e.g. fixes lots of problems when working with https sites through proxies. - curl_easy_unescape.3: update RFC reference Reported-by: bsammon Bug: https://github.com/bagder/curl/issues/282 Jay Satiro (20 May 2015) - CURLOPT_POSTFIELDS.3: Mention curl_easy_escape .. also correct some variable naming in curl_easy_escape.3 Bug: https://github.com/bagder/curl/issues/281 Reported-by: bsammon@users.noreply.github.com Daniel Stenberg (19 May 2015) - [Brian Prodoehl brought this change] openssl: Use SSL_CTX_set_msg_callback and SSL_CTX_set_msg_callback_arg BoringSSL removed support for direct callers of SSL_CTX_callback_ctrl and SSL_CTX_ctrl, so move to a way that should work on BoringSSL and OpenSSL. re #275 Jay Satiro (19 May 2015) - curl.1: fix missing space in section --data Daniel Stenberg (19 May 2015) - transfer: remove erroneous and misleading comment Kamil Dudka (19 May 2015) - http: silence compile-time warnings without USE_NGHTTP2 Error: CLANG_WARNING: lib/http.c:173:16: warning: Value stored to 'http' during its initialization is never read Error: COMPILER_WARNING: lib/http.c: scope_hint: In function ‘http_disconnect’ lib/http.c:173:16: warning: unused variable ‘http’ [-Wunused-variable] Jay Satiro (19 May 2015) - transfer: Replace __func__ instances with function name .. also make __func__ replacement in multi. Prior to this change debug builds would fail to build if the compiler was building pre-c99 and didn't support __func__. Daniel Stenberg (19 May 2015) - [Viktor Szakats brought this change] build: bump version in default nghttp2 paths - INTERNALS: we require nghttp2 1.0.0+ now Jay Satiro (18 May 2015) - http: Add some include guards for the new HTTP/2 stuff Daniel Stenberg (18 May 2015) - http2: store upload state per stream Use a curl_off_t for upload left - http2: fix build when NOT h2-enabled - http2: switch to use Curl_hash_destroy() as after 4883f7019d3, the *_clean() function only flushes the hash. - curlver: restore LIBCURL_VERSION_NUM defined as a full number As it breaks configure, curl-config and test 1023 if not. - [Anthony Avina brought this change] hostip: fix unintended destruction of hash table .. and added unit1602 for hash.c - curlver: introducing new version number (checking) macros - runtests.pl: use 'h2c' now, no -14 anymore - [Tatsuhiro Tsujikawa brought this change] http2: Ignore if we have stream ID not in hash in on_stream_close We could get stream ID not in the hash in on_stream_close. For example, if we decided to reject stream (e.g., PUSH_PROMISE), then we don't create stream and store it in hash with its stream ID. - [Tatsuhiro Tsujikawa brought this change] Require nghttp2 v1.0.0 This commit requires nghttp2 v1.0.0 to compile, and migrate to v1.0.0, and utilize recent version of nghttp2 to simplify the code, First we use nghttp2_option_set_no_recv_client_magic function to detect nghttp2 v1.0.0. That function only exists since v1.0.0. Since nghttp2 v0.7.5, nghttp2 ensures header field ordering, and validates received header field. If it found error, RST_STREAM with PROTOCOL_ERROR is issued. Since we require v1.0.0, we can utilize this feature to simplify libcurl code. This commit does this. Migration from 0.7 series are done based on nghttp2 migration document. For libcurl, we removed the code sending first 24 bytes client magic. It is now done by nghttp2 library. on_invalid_frame_recv callback signature changed, and is updated accordingly. - http2: infof length in on_frame_send() - pipeline: switch some code over to functions ... to "compartmentalize" a bit and make it easier to change behavior when multiplexing is used instead of good old pipelining. - symbols-in-versions: add CURLOPT_PIPEWAIT - CURLOPT_PIPEWAIT: added By setting this option to 1 libcurl will wait for a connection to reveal if it is possible to pipeline/multiplex on before it continues. - Curl_http_readwrite_headers: minor code simplification - IsPipeliningPossible: fixed for http2 - http2: bump the h2 buffer size to 32K for speed - http2: remove the stream from the hash in stream_close callback ... and suddenly things work much better! - http2: if there is paused data, do not clear the drain field - http2: rename s/data/pausedata - http2: "stream %x" in all outputs to make it easier to search for - http2: Curl_expire() all handles with incoming traffic ... so that they'll get handled next in the multi loop. - http2: don't signal settings change for same values - http2: set default concurrency, fix ConnectionExists for multiplex - bundles: store no/default/pipeline/multiplex to allow code to act differently on the situation. Also added some more info message for the connection re-use function to make it clearer when connections are not re-used. - http2: lazy init header_recvbuf It makes us use less memory when not doing HTTP/2 and subsequently also makes us not have to cleanup HTTP/2 related data when not using HTTP/2! - http2: separate multiplex/pipelining + cleanup memory leaks - CURLMOPT_PIPELINE: bit 1 is for multiplexing - [Tatsuhiro Tsujikawa brought this change] http2: Fix bug that data to be drained are overwritten by pending "paused" data - [Tatsuhiro Tsujikawa brought this change] http2: Don't call nghttp2_session_mem_recv while it is paused by a stream - [Tatsuhiro Tsujikawa brought this change] http2: Read data left in connection buffer after pause Previously when we do pause because of out of buffer, we just throw away unread data in connection buffer. This just broke protocol framing, and I saw occasional FRAME_SIZE_ERROR. This commit fix this issue by remembering how much data read, and in the next iteration, we process remaining data. - [Tatsuhiro Tsujikawa brought this change] http2: Fix streams get stuck This commit fixes the bug that streams get stuck if stream gets some DATA, and stream->closed becomes true at the same time. Previously, in this condition, after we processed DATA, we are going to try to read data from underlying transport, but there is no data, and gets EAGAIN. There was no code path to evaludate stream->closed. - http2: store incoming h2 SETTINGS - pipeline: move function to pipeline.c and make static ... as it was only used from there. - IsPipeliningPossible: http2 can always "pipeline" (multiplex) - http2: remove debug logging from on_frame_recv - http2: remove the closed check in http2_recv With the "drained" functionality we can get here slightly asynchronously so the stream have have been closed but there is pending data left to read. - http2: bump the h2 buffer to 8K - http2: Curl_read should not use the single buffer ... as it does for pipelining when we're multiplexing, as we need the different buffers to store incoming data correctly for all streams. - http2: more debug outputs - http2: leave WAITPERFORM when conn is multiplexed No need to wait for our "spot" like for pipelining - http2: force "drainage" of streams ... which is necessary since the socket won't be readable but there is data waiting in the buffer. - http2: move the mem+len pair to the stream struct - http2: more stream-oriented data, stream ID 0 is for connections - http2: move lots of state data to the 'stream' struct ... from the connection struct. The stream one being the 'struct HTTP' which is kept in the SessionHandle struct (easy handle). lookup streams for incoming frames in the stream hash, hashing is based on the stream id and we get the SessionHandle for the incoming stream that way. - HTTP: partial start at fixing up hash-lookups on http2 frame receival - http: a stream hash for h2 multiplexing - http: a stream hash for h2 multiplexing - http2: debug log when receiving unexpected stream_id - http2: move stream_id to the HTTP struct (per-stream) - Curl_http2_setup: only do it once and enable multiplex on the server Once we know we are HTTP/2 enabled we know the server can multiplex. - http: switch on "pipelining" (multiplexing) for HTTP/2 servers ... and do not blacklist any. - README.pipelining: removed All the details mentioned here are better documented in man pages Dan Fandrich (14 May 2015) - build: removed bundles.c from make files This file was removed in commit fd137786 Daniel Stenberg (14 May 2015) - Curl_conncache_add_conn: fix memory leak on OOM - CURLMOPT_MAX_HOST_CONNECTIONS: host = host name + port number - conncache: keep bundles on host+port bases, not only host names Previously we counted all connections to a specific host name and that would be used for the CURLMOPT_MAX_HOST_CONNECTIONS check for example, while servers on different port numbers are normally considered different "origins" on the web and should thus be considered different hosts. - bundles: merged into conncache.c All the existing Curl_bundle* functions were only ever used from within the conncache.c file, so I moved them over and made them static (and removed the Curl_ prefix). - hostcache: made all host caches use structs, not pointers This avoids unnecessary dynamic allocs and as this also removed the last users of *hash_alloc() and *hash_destroy(), those two functions are now removed. - multi: converted socket hash into non-allocated struct avoids extra dynamic allocation - connection cache: avoid Curl_hash_alloc() ... by using plain structs instead of pointers for the connection cache, we can avoid several dynamic allocations that weren't necessary. - proxy: add newline to info message Patrick Monnerat (8 May 2015) - FTP: fix dangling conn->ip_addr dereference on verbose EPSV. - FTP: Make EPSV use the control IP address rather than the original host. This ensures an alternate address is not used. Does not apply to proxy tunnel. Daniel Stenberg (8 May 2015) - [Alessandro Ghedini brought this change] tool_help: fix formatting for --next option - [Egon Eckert brought this change] opts: improved the TCP keepalive examples Jay Satiro (8 May 2015) - winbuild: Document the option used to statically link the CRT - Document option RTLIBCFG (runtime library configuration). Bug: https://github.com/bagder/curl/issues/254 Reported-by: Bert Huijben - [Orgad Shaneh brought this change] netrc: Read in text mode when cygwin Use text mode when cygwin to eliminate trailing carriage returns. Bug: https://github.com/bagder/curl/pull/258 Patrick Monnerat (5 May 2015) - OS400: Add SPNEGO service name options to ILE/RPG binding. Daniel Stenberg (4 May 2015) - curl_multi_info_read.3: fix typo Reported-by: Liviu Chircu - MANUAL: language fix Reported-by: Fred Stluka Bug: https://github.com/bagder/curl/issues/255 - [Alessandro Ghedini brought this change] gtls: properly retrieve certificate status Also print the revocation reason if appropriate. - OpenSSL: conditional check for SSL3_RT_HEADER The symbol is fairly new. Reported-by: Kamil Dudka - openssl: skip trace outputs for ssl_ver == 0 The OpenSSL trace callback is wonderfully undocumented but given a journey in the source code, it seems the cases were ssl_ver is zero doesn't follow the same pattern and thus turned out confusing and misleading. For now, we skip doing any CURLINFO_TEXT logging on those but keep sending them as CURLINFO_SSL_DATA_OUT/IN. Also, I added direction to the text info and I edited some functions slightly. Bug: https://github.com/bagder/curl/issues/219 Reported-by: Jay Satiro, Ashish Shukla Marc Hoersken (2 May 2015) - schannel.c: Small changes - schannel.c: Improve code path and readability - schannel.c: Improve error and return code handling upon aa99a63f03 - [Chris Araman brought this change] schannel: fix regression in schannel_recv https://github.com/bagder/curl/issues/244 Commit 145c263 changed the behavior when Curl_read_plain returns CURLE_AGAIN. We now handle CURLE_AGAIN and SEC_I_CONTEXT_EXPIRED correctly. - Bug born in changes made several days ago 9a91e80. Commit: https://github.com/bagder/curl/commit/926cb9f Reported-by: Ray Satiro Daniel Stenberg (30 Apr 2015) - [Michael Osipov brought this change] configure: remove missing and make it autogenerate The missing file has not been autogenerated because a temporary fix was employed in acinclude.m4 which blocked update. Removed that fix and a recent version of missing is copied to build root. - [Michael Osipov brought this change] acinclude.m4: fix test for default CA cert bundle/path test(1) on HP-UX requires a single equals sign and fails with two. Let's use one and make every OS happy. - CONTRIBUTING.md: remove the sourceforge mention Reported-By: Michael Osipov Dan Fandrich (30 Apr 2015) - http_negotiate_sspi: added missing data variable Daniel Stenberg (30 Apr 2015) - [Michael Osipov brought this change] configure: remove --automake from libtoolize call That option is not mentioned in the man page of libtoolize 2.4.4.19-fda4. Moveover, a comment in line 2623 says "--automake is for 1.5 compatibility". This option is redundant now. - [Viktor Szakats brought this change] build: update depedency versions, urls, example makefiles - update default versions of dependencies (except for rare/old platforms) - update urls - sync examples makefiles with main ones - remove line ending space - [Michael Osipov brought this change] configure: remove autogenerated files by autoconf * install-sh is always regenerated * mkinstalldirs was already redudant years ago. Automake uses install for that. See: http://lists.gnu.org/archive/html/automake/2007-03/msg00015.html - [Anders Bakken brought this change] curl_multi_add_handle: next is already NULL Jay Satiro (30 Apr 2015) - schannel: Fix out of bounds array Bug born in changes made several days ago 9a91e80. Bug: http://curl.haxx.se/mail/lib-2015-04/0199.html Reported-by: Brian Chrisman - docs/libcurl: gitignore libcurl-symbols.3 Bug: http://curl.haxx.se/mail/lib-2015-04/0191.html Reported-by: Michael Osipov - [Viktor Szakats brought this change] lib/makefile.m32: add arch -m32/-m64 to LDFLAGS This fixes using a multi-target mingw distro to build curl .dll for the non-default target. (mirroring the same patch present in src/makefile.m32) Daniel Stenberg (29 Apr 2015) - RELEASE-NOTES: synced with cd39b944afc I've not mentioned the bug fixes that were shipped in 7.42.1 from the 7_42 branch. - THANKS: merged from the 7.42.1 release - CURLOPT_HEADEROPT: default to separate Make the HTTP headers separated by default for improved security and reduced risk for information leakage. Bug: http://curl.haxx.se/docs/adv_20150429.html Reported-by: Yehezkel Horowitz, Oren Souroujon Linus Nielsen (28 Apr 2015) - docs/libcurl: Corrected a typo in the CURLOPT_PROXY_SERVICE_NAME documentation Daniel Stenberg (28 Apr 2015) - hash: simplify Curl_str_key_compare() - dist: ship CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME - [Linus Nielsen brought this change] Negotiate: custom service names for SPNEGO. * Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME. * Add new curl options, --proxy-service-name and --service-name. - http2: unify http_conn variable names to 'c' - ConnectionExists: call it multi-use instead of pipelining So that it fits HTTP/2 as well Kamil Dudka (27 Apr 2015) - [Paul Howarth brought this change] nss: fix compilation failure with old versions of NSS Bug: http://curl.haxx.se/mail/lib-2015-04/0095.html Daniel Stenberg (27 Apr 2015) - sws: init http2 state properly It would otherwise cause problems when running tests after 1801 etc. - curl_easy_getinfo.3: document 'internals' in CURLINFO_TLS_SESSION ... as it was previouly undocumented what the pointer was. - runtests: use a DISABLED.local file too ... and have git ignore that. Allows for a dev to add tests to ignore in local tests and yet don't obstruct a normal git work flow. Marc Hoersken (26 Apr 2015) - schannel.c: Fix typo introduced with 3447c973d0 - schannel.c: Fix possible SEC_E_BUFFER_TOO_SMALL error Reported-by: Brian Chrisman Daniel Stenberg (26 Apr 2015) - schannel: re-indented file to follow curl style better white space changes only - Curl_ossl_init: load builtin modules To have engine modules work, we must tell openssl to load builtin modules first. Bug: https://github.com/bagder/curl/pull/206 - configure: follow-up fix for krb5-config commit 5b66860652 was incomplete so here's a follow-up fix Reported-by: Dagobert Michelsen Bug: https://github.com/bagder/curl/commit/5b668606527613179d0349f21b4ab0df2971e3d2#commitcomment-10473445 - openssl: fix serial number output The code extracting the cert serial number was broken and didn't display it properly. Bug: https://github.com/bagder/curl/issues/235 Reported-by: dkjjr89 - [Grant Pannell brought this change] sasl_sspi: Populate domain from the realm in the challenge Without this, SSPI based digest auth was broken. Bug: https://github.com/bagder/curl/pull/141.patch Jay Satiro (25 Apr 2015) - [Anthony Avina brought this change] tool: New option --data-raw to HTTP POST data, '@' allowed. Add new option --data-raw which is almost the same as --data but does not have a special interpretation of the @ character. Prior to this change there was no (easy) way to pass the @ character as the first character in POST data without it being interpreted as a special character. Bug: https://github.com/bagder/curl/issues/198 Reported-by: Jens Rantil Dan Fandrich (25 Apr 2015) - test2039: fixed line endings that caused a test failure Daniel Stenberg (24 Apr 2015) - [Viktor Szakats brought this change] netrc: add unit tests for 'default' support - [Viktor Szakats brought this change] netrc: support 'default' token The 'default' token has no argument and means to match _any_ domain. It must be placed last if there are 'machine ' tokens in the same file. See full description here: https://www.gnu.org/software/inetutils/manual/html_node/The-_002enetrc-File.html - ROADMAP.md: extended the HTTP/2 section, reformatted Elaborated on several of the remaining HTTP/2 parts and made document use a format that ends up nicer on the web page: http://curl.haxx.se/dev/roadmap.html Kamil Dudka (23 Apr 2015) - curl -z: do not write empty file on unmet condition This commit fixes a regression introduced in curl-7_41_0-186-g261a0fe. It also introduces a regression test 1424 based on tests 78 and 1423. Reported-by: Viktor Szakats Bug: https://github.com/bagder/curl/issues/237 Dan Fandrich (23 Apr 2015) - tool: fixed a comment typo - README: convert to UTF-8 Jay Satiro (22 Apr 2015) - cyassl: Implement public key pinning Also add public key extraction example to CURLOPT_PINNEDPUBLICKEY doc. Dan Fandrich (22 Apr 2015) - [Alessandro Ghedini brought this change] curl.1: fix typo Kamil Dudka (22 Apr 2015) - docs: distribute the CURLOPT_PINNEDPUBLICKEY(3) man page, too - tests/unit/.gitignore: hide unit1601 and above, too Daniel Stenberg (22 Apr 2015) - connectionexists: follow-up to fd9d3a1ef1f PROTOPT_CREDSPERREQUEST still needs to be checked even when NTLM is not enabled. Mistake-caught-by: Kamil Dudka - connectionexists: fix build without NTLM Do not access NTLM-specific struct fields when built without NTLM enabled! bug: http://curl.haxx.se/?i=231 Reported-by: Patrick Rapin - bump: start working toward 7.43.0 Kamil Dudka (22 Apr 2015) - nss: implement public key pinning for NSS backend Bug: https://bugzilla.redhat.com/1195771 Daniel Stenberg (22 Apr 2015) - dist: include {src,lib}/checksrc.whitelist Version 7.42.0 (22 Apr 2015) Daniel Stenberg (22 Apr 2015) - RELEASE-NOTES: updated for 7.42.0 - THANKS: added contributors from 7.42.0 release notes - THANKS-filter: a few more alterations to squash - contrithanks.sh: helper script for maintaining THANKS - http_done: close Negotiate connections when done When doing HTTP requests Negotiate authenticated, the entire connnection may become authenticated and not just the specific HTTP request which is otherwise how HTTP works, as Negotiate can basically use NTLM under the hood. curl was not adhering to this fact but would assume that such requests would also be authenticated per request. CVE-2015-3148 Bug: http://curl.haxx.se/docs/adv_20150422B.html Reported-by: Isaac Boukris - fix_hostname: zero length host name caused -1 index offset If a URL is given with a zero-length host name, like in "http://:80" or just ":80", `fix_hostname()` will index the host name pointer with a -1 offset (as it blindly assumes a non-zero length) and both read and assign that address. CVE-2015-3144 Bug: http://curl.haxx.se/docs/adv_20150422D.html Reported-by: Hanno Böck - cookie: cookie parser out of boundary memory access The internal libcurl function called sanitize_cookie_path() that cleans up the path element as given to it from a remote site or when read from a file, did not properly validate the input. If given a path that consisted of a single double-quote, libcurl would index a newly allocated memory area with index -1 and assign a zero to it, thus destroying heap memory it wasn't supposed to. CVE-2015-3145 Bug: http://curl.haxx.se/docs/adv_20150422C.html Reported-by: Hanno Böck - ConnectionExists: for NTLM re-use, require credentials to match CVE-2015-3143 Bug: http://curl.haxx.se/docs/adv_20150422A.html Reported-by: Paras Sethia Jay Satiro (21 Apr 2015) - [byronhe brought this change] openssl: add OPENSSL_NO_SSL3_METHOD check Daniel Stenberg (20 Apr 2015) - CURLOPT_HEADERFUNCTION.3: match parameter name in synopsis and desc Bug: https://github.com/bagder/curl/issues/229 Reported-by: bsammon Kamil Dudka (20 Apr 2015) - [Mostyn Bramley-Moore brought this change] configure --with-nss: remove unneeded libs from the fallback Daniel Stenberg (20 Apr 2015) - contributors.sh: fix help output, filter out (-prefix from names - RELEASE-NOTES: synced with cc0e7ebc3be0 - [Michael Stapelberg brought this change] CURLMOPT_TIMERFUNCTION.3: Clarify, add an example - [Viktor Szakáts brought this change] vtls/openssl: use https in URLs and a comment typo fixed - curl_version_info.3: fixed the 'protocols' variable type Reported-by: John Marshall Bug: https://github.com/bagder/curl/issues/225 Dan Fandrich (18 Apr 2015) - test1423: added missing "file" to server section Daniel Stenberg (17 Apr 2015) - TheArtOfHttpScripting: Multiple URLs + Multiple HTTP methods ... and some minor edits - Revert "HTTP: don't abort connections with pending Negotiate authentication" This reverts commit 5dc68dd6092a789bb5e0a67a1c1356ba87fdcbc6. Bug: https://github.com/bagder/curl/issues/223 Reported-by: Michael Osipov Jay Satiro (17 Apr 2015) - cyassl: Fix include order Prior to this change CyaSSL's build options could redefine some generic build symbols. http://curl.haxx.se/mail/lib-2015-04/0069.html Kamil Dudka (17 Apr 2015) - configure --with-nss: drop redundant if statement - configure --with-nss=PATH: query pkg-config if available Bug: https://github.com/bagder/curl/pull/171 Daniel Stenberg (17 Apr 2015) - parsecfg: do not continue past a zero termination When a config file line ends without newline, the parsing function could continue reading beyond that point in memory. Reported-by: Hanno Böck Jay Satiro (16 Apr 2015) - gitignore: Ignore Windows build output directories Daniel Stenberg (15 Apr 2015) - RELEASE-NOTES: synced with 1ba6e4c88e0 - TODO: 17.9 Choose the name of file in braces for complex URLs - TODO: a little caution that maybe not all ideas are still good - TODO: 17.8 offer color-coded HTTP header output - TODO: 17.7 warning when sending binary output to terminal - KNOWN_BUGS: #90 IMAP "SEARCH ALL" truncates output on large boxes Jay Satiro (14 Apr 2015) - cyassl: Add support for TLS extension SNI Daniel Stenberg (13 Apr 2015) - [Matthew Hall brought this change] gitignore: ignore test-driver file - [Matthew Hall brought this change] vtls_openssl: improve PKCS#12 load failure error message - [Matthew Hall brought this change] vtls_openssl: fix minor typo in PKCS#12 load routine - [Matthew Hall brought this change] vtls_openssl: improve client certificate load failure error messages - [Matthew Hall brought this change] vtls_openssl: remove ambiguous SSL_CLIENT_CERT_ERR constant - BUGS: refer to the github issue tracker now as primary - firefox-db2pem: fix wildcard to find Firefox default profile At some point, Firefox has changed and generates different directory names for the default profile that made this script fail to find them. Bug: https://github.com/bagder/curl/issues/207 Reported-by: sneakyimp Jay Satiro (11 Apr 2015) - cyassl: Include the CyaSSL build config CyaSSL >= 2.6.0 may have an options.h that was generated during its build by configure. - build: Generate source prerequisites for Visual Studio in generate.bat Prior to this change Visual Studio builds could fail due to missing prerequisites src/tool_hugehelp.c and include/curl/curlbuild.h. http://curl.haxx.se/mail/lib-2015-04/0034.html Daniel Stenberg (9 Apr 2015) - [Viktor Szakats brought this change] lib/makefile.m32: add missing libs to build libcurl.dll Add 'gdi32' and 'crypt32' Windows implibs to avoid failure while building libcurl.dll using the mingw compiler. The same logic is used in 'src/makefile.m32' when building curl.exe. Kamil Dudka (8 Apr 2015) - test142[23]: verify that an empty file is stored on success - src/tool_operate: create output file on successful download ... of an empty file Bug: https://github.com/bagder/curl/issues/183 - src/tool_cb_wrt: separate fnc for output file creation Daniel Stenberg (7 Apr 2015) - [Da-Yoon Chung brought this change] lib/transfer.c: Remove factor of 8 from sleep time calculation The factor of 8 is a bytes-to-bits conversion factor, but pkt_size and rate_bps are both in bytes. When using the rate limiting option, curl waits 8 times too long, and then transfers very quickly until the average rate reaches the limit. The average rate follows the limit over time, but the actual traffic is bursty. Thanks-to: Benjamin Gilbert - [Jay Satiro brought this change] x509asn1: Silence x64 loss-of-data warning on RSA key length assignment The key length in bits will always fit in an unsigned long so the loss-of-data warning assigning the result of x64 pointer arithmetic to an unsigned long is unnecessary. - [Jay Satiro brought this change] cyassl: Use CYASSL_MAX_ERROR_SZ for error buffer size Also fix it so that all ERR_error_string calls use an error buffer. CyaSSL's implementation of ERR_error_string only writes the error when an error buffer is passed. http://www.yassl.com/forums/topic599-openssl-compatibility-and-errerrorstring.html - [Jay Satiro brought this change] cyassl: Remove 'Connecting to' message from cyassl_connect_step2 Prior to this change libcurl could show multiple 'CyaSSL: Connecting to' messages since cyassl_connect_step2 is called multiple times, typically. The message is superfluous even once since libcurl already informs the user elsewhere in code that it is connecting. - [Viktor Szakats brought this change] checksrc.bat: quotes to support an SRC_DIR with spaces - hostip: fix compiler warnings introduced in the previous mini-series of 3 commits - [Stefan Bühler brought this change] actually implement CURLOPT_RESOLVE removals - also log when a CURLOPT_RESOLVE entry couldn't get parsed - [Stefan Bühler brought this change] move Curl_share_lock and ref counting into Curl_fetch_addr - [Stefan Bühler brought this change] fix refreshing of obsolete dns cache entries - cache entries must be also refreshed when they are in use - have the cache count as inuse reference too, freeing timestamp == 0 special value - use timestamp == 0 for CURLOPT_RESOLVE entries which don't get refreshed - remove CURLOPT_RESOLVE special inuse reference (timestamp == 0 will prevent refresh) - fix Curl_hostcache_clean - CURLOPT_RESOLVE entries don't have a special reference anymore, and it would also release non CURLOPT_RESOLVE references - fix locking in Curl_hostcache_clean - fix unit1305.c: hash now keeps a reference, need to set inuse = 1 - RELEASE-NOTES: synced with abf6bddc14a - [Jay Satiro brought this change] checksrc.bat: Check lib\vtls source - [Jay Satiro brought this change] cyassl: Set minimum protocol version before CTX callback This change is to allow the user's CTX callback to change the minimum protocol version in the CTX without us later overriding it, as we did prior to this change. - [Jay Satiro brought this change] build-openssl.bat: Fix mixed line endings Use LF not CRLF, throughout. msysgit will only convert a file to CRLF on checkout if it's not mixed. - [Jay Satiro brought this change] cyassl: Fix certificate load check SSL_CTX_load_verify_locations can return negative values on fail, therefore to check for failure we check if load is != 1 (success) instead of if load is == 0 (failure), the latter being incorrect given that behavior. - [Tatsuhiro Tsujikawa brought this change] http2: Fix missing nghttp2_session_send call in Curl_http2_switched Previously in Curl_http2_switched, we called nghttp2_session_mem_recv to parse incoming data which were already received while curl was handling upgrade. But we didn't call nghttp2_session_send, and it led to make curl not send any response to the received frames. Most likely, we received SETTINGS from server at this point, so we missed opportunity to send SETTINGS + ACK. This commit adds missing nghttp2_session_send call in Curl_http2_switched to fix this issue. Bug: https://github.com/bagder/curl/issues/192 Reported-by: Stefan Eissing - cookie: handle spaces after the name in Set-Cookie "name =value" is fine and the space should just be skipped. Updated test 31 to also test for this. Bug: https://github.com/bagder/curl/issues/195 Reported-by: cromestant Help-by: Frank Gevaerts - [Jay Satiro brought this change] cyassl: Fix library initialization return value (Curl_cyassl_init) - Return 1 on success, 0 in failure. Prior to this change the fail path returned an incorrect value and the evaluation to determine whether CyaSSL_Init had succeeded was incorrect. Ironically that combined with the way curl_global_init tests SSL library initialization (!Curl_ssl_init()) meant that CyaSSL having been successfully initialized would be seen as that even though the code path and return value in Curl_cyassl_init were wrong. - [Thomas Ruecker brought this change] CURLOPT_HTTP200ALIASES.3: Mainly SHOUTcast servers use "ICY 200" Icecast versions 1.3.0 through 1.3.12 would reply with "ICY 200" under certain conditions: client_wants_icy_headers (connection_t *con) { const char *val; if (!con) return 1; val = get_user_agent (con); if (!val || !val[0] || strcmp (val, "(null)") == 0) return 1; if (con->food.client->use_icy) return 1; if (strncasecmp (val, "winamp", 6) == 0) return 1; if (strncasecmp (val, "Shoutcast", 9) == 0) return 1; return 0; } So mainly if there is no 'user agent' or it is '(null)' or contains 'winamp' or 'Shoutcast'. No mainstream distribution carries Icecast 1.3.x anymore, after all it was released in 2002 and superseded by Icecast 2.x. Dan Fandrich (31 Mar 2015) - axtls: add timeout within Curl_axtls_connect This allows test 405 to pass on axTLS. Daniel Stenberg (30 Mar 2015) - [Jay Satiro brought this change] checksrc: Windows-specific input fixes lib/config-win32ce.h - Fix whitespace for checksrc compliance. lib/checksrc.pl - Remove trailing carriage returns from input. projects/checksrc.bat - Ignore tool_hugehelp.c. - [Dagobert Michelsen brought this change] configure: Use KRB5CONFIG for krb5-config Allows the user to easier override its path. Bug: http://curl.haxx.se/bug/view.cgi?id=1486 - multi: remove_handle: move pending connections If the handle removed from the multi handle happens to be the one "owning" the pipeline other transfers will be waiting indefinitely. Now we move such handles back to connect to have them race (again) for getting the connection and thus avoid hanging. Bug: http://curl.haxx.se/bug/view.cgi?id=1465 Reported-by: Jiri Dvorak - KNOWN_BUGS: 89 is bug #1411 Disabling pipelining on multi handle with in-progress pipelined requests leads to heap corruption and crash - [Jay Satiro brought this change] cyassl: CTX callback cosmetic changes and doc fix - More descriptive fail message for NO_FILESYSTEM builds. - Cosmetic changes. - Change more of CURLOPT_SSL_CTX_* doc to not be OpenSSL specific. - RELEASE-NOTES: synced with d2feb71752f Dan Fandrich (28 Mar 2015) - tool_operate: only set SSL options if SSL is enabled - runtests.pl: detect WolfSSL as yassl Daniel Stenberg (27 Mar 2015) - [Kyle L. Huff brought this change] cyassl: add SSL context callback support for CyaSSL Adds support for CURLOPT_SSL_CTX_FUNCTION when using CyaSSL, and better handles CyaSSL instances using NO_FILESYSTEM. - [Kyle L. Huff brought this change] cyassl: remove undefined reference to CyaSSL_no_filesystem_verify CyaSSL_no_filesystem_verify is not (or no longer) defined by cURL or CyaSSL. This reference causes build errors when compiling with NO_FILESYSTEM. - [Jay Satiro brought this change] build: Fix libcurl.sln erroneous mixed configurations Prior to this change some Release configurations had an active configuration assignment to their Debug counterpart. - [Jay Satiro brought this change] vtls: Don't accept unknown CURLOPT_SSLVERSION values - [Jay Satiro brought this change] url: Don't accept CURLOPT_SSLVERSION unless USE_SSL is defined - [Paul Howarth brought this change] build: link curl to openssl libraries when openssl support is enabled This fixes a build failure where openssl and libmetalink are used together and the system linker does not do implicit linking (e.g. Fedora 13 and later releases). The MD5 functions required for metalink support must be pulled in from the openssl crypto library. This is similar to commit c6e7cbb94e669b85d3eb8e015ec51d0072112133, which fixes the same sort of problem for NSS builds. - multi: on a request completion, check all CONNECT_PEND transfers ... even if they don't have an associated connection anymore. It could leave the waiting transfers pending with no active one on the connection. Bug: http://curl.haxx.se/bug/view.cgi?id=1465 Reported-by: Jiri Dvorak - [Emil Lerner brought this change] globbing: fix url number calculation when using range with step In function glob_range, the number of urls was multiplied by (max - min + 1), regardless of step. The correct formula is (max - min) / step + 1 - README.http2: refreshed and added TODO items - [Emil Lerner brought this change] globbing: fix step parsing for character globbing ranges The glob_range function used wrong offset (3 instead of 4) for parsing integer step inside character range specification, which led to 'bad range' error when using character ranges with explicitly specified step (such as '[a-z:2]') - polarssl: called mbedTLS in 1.3.10 and later - polarssl: remove dead code and simplify code by changing if-elses to a switch() CID 1291706: Logically dead code. Execution cannot reach this statement - polarssl: remove superfluous for(;;) loop "unreachable: Since the loop increment is unreachable, the loop body will never execute more than once." Coverity CID 1291707 - Curl_ssl_md5sum: return CURLcode ... since the funciton can fail on OOM. Check this return code. Coverity CID 1291705. - [Jay Satiro brought this change] cyassl: default to highest possible TLS version (cyassl_connect_step1) - Use TLS 1.0-1.2 by default when available. CyaSSL/wolfSSL >= v3.3.0 supports setting a minimum protocol downgrade version. cyassl/cyassl@322f79f - [Jay Satiro brought this change] cyassl: Check for invalid length parameter in Curl_cyassl_random - [Jay Satiro brought this change] cyassl: If wolfSSL then identify as such in version string Dan Fandrich (24 Mar 2015) - symbols-in-versions: added CURLOPT_PATH_AS_IS - testcurl.pl: add the --notes option to supply more info about a build Support for notes has been in place for a while, but it required being added to the setup file manually. - curl_memory: make curl_memory.h the second-last header file loaded This header file must be included after all header files except memdebug.h, as it does similar memory function redefinitions and can be similarly affected by conflicting definitions in system or dependent library headers. Daniel Stenberg (24 Mar 2015) - openssl: do the OCSP work-around for libressl too I tested with libressl git master now (v2.1.4-27-g34bf96c) and it seems to still require the work-around for stapling to work. - openssl: verifystatus: only use the OCSP work-around <= 1.0.2a URL: http://curl.haxx.se/mail/lib-2015-03/0205.html Reported-by: Alessandro Ghedini - openssl: adapt to ASN1/X509 things gone opaque in 1.1 Dan Fandrich (24 Mar 2015) - [Jay Satiro brought this change] curl_easy_setopt.3: Fix misspelling in CURLOPT_PATH_AS_IS description - [Viktor Szakáts brought this change] CURLOPT_HTTPHEADER.3: fix typo in recent commit - [Viktor Szakáts brought this change] CURLOPT_PATH_AS_IS.3: add type 'long' to prototype - vtls: fix compile with --disable-crypto-auth but with SSL This is a strange combination of options, but is allowed. Patrick Monnerat (24 Mar 2015) - os400: define new options in ILE/RPG binding. Daniel Stenberg (24 Mar 2015) - RELEASE-NOTES: synced with f6878609361 - curl_easy_setopt.3: Add CURLOPT_PATH_AS_IS - CURLOPT_PATH_AS_IS: added --path-as-is is the command line option Added docs in curl.1 and CURLOPT_PATH_AS_IS.3 Added test in test 1241 - [Yamada Yasuharu brought this change] curl_easy_recv/send: make them work with the multi interface By making sure Curl_getconnectinfo() uses the correct connection cache to find the last connection. - http2: move the init too for when its actually needed ... it would otherwise lead to memory leakage if we never actually do the switch. Dan Fandrich (23 Mar 2015) - dict: rename byte to avoid compiler shadowed declaration warning This conflicted with a WolfSSL typedef. - cyassl: include version.h to ensure the version macros are defined - test1513: eliminated race condition in test run It seems that some systems (e.g. fairly consistently in some recent Solaris autobuilds) would manage to get to the connect phase before the progress callback was called, resulting in a CURLE_COULDNT_CONNECT error. Reworked the test to point at a test server that never returns a full result so the progress callback always gets a chance to be called before the transfer can complete in some other way. Nick Zitzmann (21 Mar 2015) - darwinsssl: add support for TLS False Start TLS False Start support requires iOS 7.0 or later, or OS X 10.9 or later. Daniel Stenberg (21 Mar 2015) - gtls: add check of return code Coverity CID 1291167 pointed out that 'rc' was received but never used when gnutls_credentials_set() was used. Added return code check now. - gtls: dereferencing NULL pointer Coverity CID 1291165 pointed out 'chainp' could be dereferenced when NULL if gnutls_certificate_get_peers() had previously failed. - gtls: avoid uninitialized variable. Coverity CID 1291166 pointed out that we could read this variable uninitialized. Dan Fandrich (21 Mar 2015) - tests/certs: rebuild certificates with modified key usage bits The certificates were missing the digitalSignature and keyAgreement usage types, of which at least digitalSignature was checked by CyaSSL. This caused the test server in test 310 (among others) to fail the startup verification and therefore run (see http://curl.haxx.se/mail/lib-2014-07/0303.html). - tests/certs: added make target to rebuild certificates The certificate generation scripts were also updated to better match the format of the certificates currently checked in. Daniel Stenberg (21 Mar 2015) - x509asn1: add /* fallthrough */ in switch() case - x509asn1: minor edit to unconfuse Coverity CID 1202732 warns on the previous use, although I cannot fine any problems with it. I'm doing this change only to make the code use a more familiar approach to accomplish the same thing. - [Dagobert Michelsen brought this change] testcurl: Allow '=' in values given on command line - nss: error: unused variable 'connssl' Dan Fandrich (21 Mar 2015) - test938: added missing closing tags - cyassl: use new library version macro when available Kamil Dudka (20 Mar 2015) - [Alessandro Ghedini brought this change] curl: add --false-start option - [Alessandro Ghedini brought this change] nss: add support for TLS False Start - [Alessandro Ghedini brought this change] url: add CURLOPT_SSL_FALSESTART option This option can be used to enable/disable TLS False Start defined in the RFC draft-bmoeller-tls-falsestart. Patrick Monnerat (20 Mar 2015) - [Alessandro Ghedini brought this change] gtls: implement CURLOPT_CERTINFO Daniel Stenberg (20 Mar 2015) - [Alessandro Ghedini brought this change] openssl: try to avoid accessing OCSP structs when possible - CURLOPT_URL.3: spelling! Reported-by: Frank Gevaerts - CURLOPT_URL.3: Added "SECURITY CONCERNS" - CURLOPT_HTTPHEADER.3: add a "SECURITY CONCERNS" section Dan Fandrich (19 Mar 2015) - cyassl: detect the library as renamed wolfssl This change was made in CyaSSL/WolfSSL ver. 3.4.0 Daniel Stenberg (19 Mar 2015) - HTTP: don't switch to HTTP/2 from 1.1 until we get the 101 We prematurely changed protocol handler to HTTP/2 which made things very slow (and wrong). Reported-by: Stefan Eissing Bug: https://github.com/bagder/curl/issues/169 Dan Fandrich (19 Mar 2015) - axtls: version 1.5.2 now requires that config.h be manually included Daniel Stenberg (19 Mar 2015) - metalink: fix resource leak in OOM Coverity CID 1288826 Dan Fandrich (18 Mar 2015) - docs/libcurl: clean up libcurl-symbols.3 - docs/libcurl: check that all options with man pages are referenced If a man page exists in the opts/ directory, it must also be referenced either in curl_easy_setopt.3 or curl_multi_setopt.3 - curl_easy_setopt.3: added a few missing options Kamil Dudka (18 Mar 2015) - nss: explicitly tell NSS to disable NPN/ALPN ... if disabled at libcurl level. Otherwise, we would allow to negotiate NPN despite curl was invoked with the --no-npn option. Daniel Stenberg (18 Mar 2015) - [Jay Satiro brought this change] mkhelp: Remove trailing carriage return from every line of input - Get rid of this flood of warnings in Windows mingw build: warning: missing terminating " character The warning is due to the carriage return. When msysgit checks out files from the repo by default it converts the line endings to CRLF. Prior to this change when mkhelp.pl processed the MANUAL and curl.1 in CRLF format the trailing carriage returns caused unnecessary CR in the output. - RELEASE-NOTES: synced with e539f01567 - [Christian Weisgerber brought this change] docs/libcurl: make portability fix Using $< in a non-suffix rule context is a GNU make idiom. This bug was introduced in 7.41.0. Dan Fandrich (17 Mar 2015) - checksrc: Fix whitelist on out-of-tree builds Daniel Stenberg (17 Mar 2015) - [Stefan Bühler brought this change] Curl_sh_entry: remove unused 'timestamp' - HTTP: don't use Expect: headers when on HTTP/2 Reported-by: Stefan Eissing Bug: https://github.com/bagder/curl/issues/169 - checksrc: detect and remove space before trailing semicolons - checksrc: introduce a whitelisting concept - checksrc: use space after comma