/*************************************************** This is a library for the Adafruit 1.8" SPI display. This library works with the Adafruit 1.8" TFT Breakout w/SD card ----> http://www.adafruit.com/products/358 as well as Adafruit raw 1.8" TFT display ----> http://www.adafruit.com/products/618 Check out the links above for our tutorials and wiring diagrams These displays use SPI to communicate, 4 or 5 pins are required to interface (RST is optional) Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit! Written by Limor Fried/Ladyada for Adafruit Industries. MIT license, all text above must be included in any redistribution ****************************************************/ #include "Arduino_LCD.h" //#include #include //#include "pins_arduino.h" #include "wiring_private.h" #include // Constructor when using software SPI. All output pins are configurable. Arduino_LCD::Arduino_LCD(uint8_t cs, uint8_t rs, uint8_t sid, uint8_t sclk, uint8_t rst) : Adafruit_GFX(ILI9163C_TFTWIDTH, ILI9163C_TFTHEIGHT) { _cs = cs; _rs = rs; _sid = sid; _sclk = sclk; _rst = rst; hwSPI = false; } // Constructor when using hardware SPI. Faster, but must use SPI pins // specific to each board type (e.g. 11,13 for Uno, 51,52 for Mega, etc.) Arduino_LCD::Arduino_LCD(uint8_t cs, uint8_t rs, uint8_t rst) : Adafruit_GFX(ILI9163C_TFTWIDTH, ILI9163C_TFTHEIGHT) { _cs = cs; _rs = rs; _rst = rst; hwSPI = true; _sid = _sclk = 0; } inline void Arduino_LCD::spiwrite(uint8_t c) { //Serial.println(c, HEX); /* if (hwSPI) { SPDR = c; while(!(SPSR & _BV(SPIF))); } else { // Fast SPI bitbang swiped from LPD8806 library for(uint8_t bit = 0x80; bit; bit >>= 1) { if(c & bit) *dataport |= datapinmask; else *dataport &= ~datapinmask; *clkport |= clkpinmask; *clkport &= ~clkpinmask; } } */ SPI.transfer(c); } void Arduino_LCD::writecommand(uint8_t c) { // *rsport &= ~rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, LOW); digitalWrite(_cs, LOW); //Serial.print("C "); spiwrite(c); //SPI.transfer(c); // *csport |= cspinmask; digitalWrite(_cs, HIGH); } void Arduino_LCD::writedata(uint8_t c) { // *rsport &= ~rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); //Serial.print("D "); spiwrite(c); //SPI.transfer(c); // *csport |= cspinmask; digitalWrite(_cs, HIGH); } // Rather than a bazillion writecommand() and writedata() calls, screen // initialization commands and arguments are organized in these tables // stored in PROGMEM. The table may look bulky, but that's mostly the // formatting -- storage-wise this is hundreds of bytes more compact // than the equivalent code. Companion function follows. #define DELAY 0x80 //PROGMEM static prog_uchar /*uint8_t Bcmd[] = { // Initialization commands for 7735B screens 18, // 18 commands in list: ILI9163C_SWRESET, DELAY, // 1: Software reset, no args, w/delay 50, // 50 ms delay ILI9163C_SLPOUT , DELAY, // 2: Out of sleep mode, no args, w/delay 255, // 255 = 500 ms delay ILI9163C_COLMOD , 1+DELAY, // 3: Set color mode, 1 arg + delay: // I THINK THERE WAS SOMETHING HERE BECAUSE THE COMMAND IS CALLED 3A on Adafruits 0x05, // 16-bit color 10, // 10 ms delay ILI9163C_FRMCTR1, 3+DELAY, // 4: Frame rate control, 3 args + delay: 0x00, // fastest refresh 0x06, // 6 lines front porch 0x03, // 3 lines back porch 10, // 10 ms delay ILI9163C_MADCTL , 1 , // 5: Memory access ctrl (directions), 1 arg: 0x08, // Row addr/col addr, bottom to top refresh ILI9163C_DISSET5, 2 , // 6: Display settings #5, 2 args, no delay: 0x15, // 1 clk cycle nonoverlap, 2 cycle gate // rise, 3 cycle osc equalize 0x02, // Fix on VTL ILI9163C_INVCTR , 1 , // 7: Display inversion control, 1 arg: 0x0, // Line inversion ILI9163C_PWCTR1 , 2+DELAY, // 8: Power control, 2 args + delay: 0x02, // GVDD = 4.7V 0x70, // 1.0uA 10, // 10 ms delay ILI9163C_PWCTR2 , 1 , // 9: Power control, 1 arg, no delay: 0x05, // VGH = 14.7V, VGL = -7.35V ILI9163C_PWCTR3 , 2 , // 10: Power control, 2 args, no delay: 0x01, // Opamp current small 0x02, // Boost frequency ILI9163C_VMCTR1 , 2+DELAY, // 11: Power control, 2 args + delay: 0x3C, // VCOMH = 4V 0x38, // VCOML = -1.1V 10, // 10 ms delay ILI9163C_PWCTR6 , 2 , // 12: Power control, 2 args, no delay: 0x11, 0x15, ILI9163C_GMCTRP1,16 , // 13: Magical unicorn dust, 16 args, no delay: 0x09, 0x16, 0x09, 0x20, // (seriously though, not sure what 0x21, 0x1B, 0x13, 0x19, // these config values represent) 0x17, 0x15, 0x1E, 0x2B, 0x04, 0x05, 0x02, 0x0E, ILI9163C_GMCTRN1,16+DELAY, // 14: Sparkles and rainbows, 16 args + delay: 0x0B, 0x14, 0x08, 0x1E, // (ditto) 0x22, 0x1D, 0x18, 0x1E, 0x1B, 0x1A, 0x24, 0x2B, 0x06, 0x06, 0x02, 0x0F, 10, // 10 ms delay ILI9163C_CASET , 4 , // 15: Column addr set, 4 args, no delay: 0x00, 0x02, // XSTART = 2 0x00, 0x81, // XEND = 129 ILI9163C_RASET , 4 , // 16: Row addr set, 4 args, no delay: 0x00, 0x02, // XSTART = 1 0x00, 0x81, // XEND = 160 ILI9163C_NORON , DELAY, // 17: Normal display on, no args, w/delay 10, // 10 ms delay ILI9163C_DISPON , DELAY, // 18: Main screen turn on, no args, w/delay 255 }, // 255 = 500 ms delay */ uint8_t Bcmd[] = { // Initialization commands for 7735B screens 19, // 19 commands in list: ILI9163C_SWRESET, DELAY, // 1: Software reset, no args, w/delay 50, // 50 ms delay 0x11 , DELAY, // 2: Out of sleep mode, no args, w/delay 100, // 255 = 500 ms delay 0x26 , 1, // 3: Set default gamma 0x04, // 16-bit color 0xb1, 2, // 4: Frame Rate 0x0b, 0x14, 0xc0, 2, // 5: VRH1[4:0] & VC[2:0] 0x08, 0x00, 0xc1, 1, // 6: BT[2:0] 0x05, 0xc5, 2, // 7: VMH[6:0] & VML[6:0] 0x41, 0x30, 0xc7, 1, // 8: LCD Driving control 0xc1, 0xEC, 1, // 9: Set pumping color freq 0x1b, 0x3a , 1 + DELAY, // 10: Set color format 0x55, // 16-bit color 100, 0x2a, 4, // 11: Set Column Address 0x00, 0x00, 0x00, 0x7f, 0x2b, 4, // 12: Set Page Address 0x00, 0x00, 0x00, 0x9f, 0x36, 1, // 12+1: Set Scanning Direction 0xc8, 0xb7, 1, // 14: Set Source Output Direciton 0x00, 0xf2, 1, // 15: Enable Gamma bit 0x01, 0xe0, 15 + DELAY, // 16: magic 0x28, 0x24, 0x22, 0x31, 0x2b, 0x0e, 0x53, 0xa5, 0x42, 0x16, 0x18, 0x12, 0x1a, 0x14, 0x03, 50, 0xe1, 15 + DELAY, // 17: more magic 0x17, 0x1b, 0x1d, 0x0e, 0x14, 0x11, 0x2c, 0xa5, 0x3d, 0x09, 0x27, 0x2d, 0x25, 0x2b, 0x3c, 50, ILI9163C_NORON , DELAY, // 18: Normal display on, no args, w/delay 10, // 10 ms delay ILI9163C_DISPON , DELAY, // 19: Main screen turn on, no args w/delay 100 }, // 100 ms delay Rcmd1[] = { // Init for 7735R, part 1 (red or green tab) 15, // 15 commands in list: ILI9163C_SWRESET, DELAY, // 1: Software reset, 0 args, w/delay 150, // 150 ms delay ILI9163C_SLPOUT , DELAY, // 2: Out of sleep mode, 0 args, w/delay 255, // 500 ms delay ILI9163C_FRMCTR1, 3 , // 3: Frame rate ctrl - normal mode, 3 args: 0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D) ILI9163C_FRMCTR2, 3 , // 4: Frame rate control - idle mode, 3 args: 0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D) ILI9163C_FRMCTR3, 6 , // 5: Frame rate ctrl - partial mode, 6 args: 0x01, 0x2C, 0x2D, // Dot inversion mode 0x01, 0x2C, 0x2D, // Line inversion mode ILI9163C_INVCTR , 1 , // 6: Display inversion ctrl, 1 arg, no delay: 0x07, // No inversion ILI9163C_PWCTR1 , 3 , // 7: Power control, 3 args, no delay: 0xA2, 0x02, // -4.6V 0x84, // AUTO mode ILI9163C_PWCTR2 , 1 , // 8: Power control, 1 arg, no delay: 0xC5, // VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD ILI9163C_PWCTR3 , 2 , // 9: Power control, 2 args, no delay: 0x0A, // Opamp current small 0x00, // Boost frequency ILI9163C_PWCTR4 , 2 , // 10: Power control, 2 args, no delay: 0x8A, // BCLK/2, Opamp current small & Medium low 0x2A, ILI9163C_PWCTR5 , 2 , // 11: Power control, 2 args, no delay: 0x8A, 0xEE, ILI9163C_VMCTR1 , 1 , // 12: Power control, 1 arg, no delay: 0x0E, ILI9163C_INVOFF , 0 , // 13: Don't invert display, no args, no delay ILI9163C_MADCTL , 1 , // 14: Memory access control (directions), 1 arg: 0xC8, // row addr/col addr, bottom to top refresh ILI9163C_COLMOD , 1 , // 15: set color mode, 1 arg, no delay: 0x05 }, // 16-bit color Rcmd2green[] = { // Init for 7735R, part 2 (green tab only) 2, // 2 commands in list: ILI9163C_CASET , 4 , // 1: Column addr set, 4 args, no delay: 0x00, 0x02, // XSTART = 0 0x00, 0x7F+0x02, // XEND = 127 ILI9163C_RASET , 4 , // 2: Row addr set, 4 args, no delay: 0x00, 0x01, // XSTART = 0 0x00, 0x9F+0x01 }, // XEND = 159 Rcmd2red[] = { // Init for 7735R, part 2 (red tab only) 2, // 2 commands in list: ILI9163C_CASET , 4 , // 1: Column addr set, 4 args, no delay: 0x00, 0x00, // XSTART = 0 0x00, 0x7F, // XEND = 127 ILI9163C_RASET , 4 , // 2: Row addr set, 4 args, no delay: 0x00, 0x00, // XSTART = 0 0x00, 0x9F }, // XEND = 159 Rcmd3[] = { // Init for 7735R, part 3 (red or green tab) 4, // 4 commands in list: ILI9163C_GMCTRP1, 16 , // 1: Magical unicorn dust, 16 args, no delay: 0x02, 0x1c, 0x07, 0x12, 0x37, 0x32, 0x29, 0x2d, 0x29, 0x25, 0x2B, 0x39, 0x00, 0x01, 0x03, 0x10, ILI9163C_GMCTRN1, 16 , // 2: Sparkles and rainbows, 16 args, no delay: 0x03, 0x1d, 0x07, 0x06, 0x2E, 0x2C, 0x29, 0x2D, 0x2E, 0x2E, 0x37, 0x3F, 0x00, 0x00, 0x02, 0x10, ILI9163C_NORON , DELAY, // 3: Normal display on, no args, w/delay 10, // 10 ms delay ILI9163C_DISPON , DELAY, // 4: Main screen turn on, no args w/delay 100 }; // 100 ms delay // Companion code to the above tables. Reads and issues // a series of LCD commands stored in PROGMEM byte array. //void Arduino_LCD::commandList(prog_uchar *addr) { void Arduino_LCD::commandList(uint8_t *addr) { uint8_t numCommands, numArgs; uint16_t ms; numCommands = *addr++; // Number of commands to follow while(numCommands--) { // For each command... writecommand(*addr++); // Read, issue command numArgs = *addr++; // Number of args to follow ms = numArgs & DELAY; // If hibit set, delay follows args numArgs &= ~DELAY; // Mask out delay bit while(numArgs--) { // For each argument... writedata(*addr++); // Read, issue argument } if(ms) { ms = *addr++; // Read post-command delay time (ms) if(ms == 255) ms = 500; // If 255, delay for 500 ms delay(ms); } } } // Initialization code common to both 'B' and 'R' type displays //void Arduino_LCD::commonInit(prog_uchar *cmdList) { void Arduino_LCD::commonInit(uint8_t *cmdList) { colstart = rowstart = 0; // May be overridden in init func pinMode(_rs, OUTPUT); pinMode(_cs, OUTPUT); /* csport = portOutputRegister(digitalPinToPort(_cs)); cspinmask = digitalPinToBitMask(_cs); rsport = portOutputRegister(digitalPinToPort(_rs)); rspinmask = digitalPinToBitMask(_rs); */ // if(hwSPI) { // Using hardware SPI SPI.begin(); SPI.setClockDivider(21); // 4 MHz (half speed) // SPI.setClockDivider(SPI_CLOCK_DIV4); // 4 MHz (half speed) // SPI.setBitOrder(MSBFIRST); // there is no setBitOrder on the SPI library for the Due SPI.setDataMode(SPI_MODE0); /* } else { pinMode(_sclk, OUTPUT); pinMode(_sid , OUTPUT); clkport = portOutputRegister(digitalPinToPort(_sclk)); clkpinmask = digitalPinToBitMask(_sclk); dataport = portOutputRegister(digitalPinToPort(_sid)); datapinmask = digitalPinToBitMask(_sid); *clkport &= ~clkpinmask; *dataport &= ~datapinmask; } */ // toggle RST low to reset; CS low so it'll listen to us // *csport &= ~cspinmask; digitalWrite(_cs, LOW); if (_rst) { pinMode(_rst, OUTPUT); digitalWrite(_rst, HIGH); delay(500); digitalWrite(_rst, LOW); delay(500); digitalWrite(_rst, HIGH); delay(500); } if(cmdList) commandList(cmdList); } // Initialization for ST7735B screens void Arduino_LCD::initB(void) { commonInit(Bcmd); commandList(Rcmd3); } // Initialization for ST7735R screens (green or red tabs) void Arduino_LCD::initR(uint8_t options) { commonInit(Rcmd1); if(options == INITR_GREENTAB) { commandList(Rcmd2green); colstart = 2; rowstart = 1; } else { // colstart, rowstart left at default '0' values commandList(Rcmd2red); } commandList(Rcmd3); } void Arduino_LCD::setAddrWindow(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1) { writecommand(ILI9163C_CASET); // Column addr set writedata(0x00); writedata(x0+colstart); // XSTART writedata(0x00); writedata(x1+colstart); // XEND writecommand(ILI9163C_RASET); // Row addr set writedata(0x00); writedata(y0+rowstart); // YSTART writedata(0x00); writedata(y1+rowstart); // YEND writecommand(ILI9163C_RAMWR); // write to RAM } void Arduino_LCD::fillScreen(uint16_t color) { uint8_t x, y, hi = color >> 8, lo = color; setAddrWindow(0, 0, _width-1, _height-1); // *rsport |= rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); for(y=_height; y>0; y--) { for(x=_width; x>0; x--) { //SPI.transfer(hi); //SPI.transfer(lo); spiwrite(hi); spiwrite(lo); } } // *csport |= cspinmask; digitalWrite(_cs, HIGH); } void Arduino_LCD::pushColor(uint16_t color) { // *rsport |= rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); spiwrite(color >> 8); spiwrite(color); //SPI.transfer(color>>8); //SPI.transfer(color); // *csport |= cspinmask; digitalWrite(_cs, HIGH); } void Arduino_LCD::drawPixel(int16_t x, int16_t y, uint16_t color) { if((x < 0) ||(x >= _width) || (y < 0) || (y >= _height)) return; setAddrWindow(x,y,x+1,y+1); // *rsport |= rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); spiwrite(color >> 8); spiwrite(color); //SPI.transfer(color>>8); //SPI.transfer(color); // *csport |= cspinmask; digitalWrite(_cs, HIGH); } void Arduino_LCD::drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color) { // Rudimentary clipping if((x >= _width) || (y >= _height)) return; if((y+h-1) >= _height) h = _height-y; setAddrWindow(x, y, x, y+h-1); uint8_t hi = color >> 8, lo = color; // *rsport |= rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); while (h--) { spiwrite(hi); spiwrite(lo); //SPI.transfer(hi); //SPI.transfer(lo); } // *csport |= cspinmask; digitalWrite(_cs, HIGH); } void Arduino_LCD::drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color) { // Rudimentary clipping if((x >= _width) || (y >= _height)) return; if((x+w-1) >= _width) w = _width-x; setAddrWindow(x, y, x+w-1, y); uint8_t hi = color >> 8, lo = color; // *rsport |= rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); while (w--) { spiwrite(hi); spiwrite(lo); //SPI.transfer(hi); //SPI.transfer(lo); } // *csport |= cspinmask; digitalWrite(_cs, HIGH); } // fill a rectangle void Arduino_LCD::fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color) { // rudimentary clipping (drawChar w/big text requires this) if((x >= _width) || (y >= _height)) return; if((x + w - 1) >= _width) w = _width - x; if((y + h - 1) >= _height) h = _height - y; setAddrWindow(x, y, x+w-1, y+h-1); uint8_t hi = color >> 8, lo = color; // *rsport |= rspinmask; // *csport &= ~cspinmask; digitalWrite(_rs, HIGH); digitalWrite(_cs, LOW); for(y=h; y>0; y--) { for(x=w; x>0; x--) { spiwrite(hi); spiwrite(lo); //SPI.transfer(hi); //SPI.transfer(lo); } } // *csport |= cspinmask; digitalWrite(_cs, HIGH); } // Pass 8-bit (each) R,G,B, get back 16-bit packed color uint16_t Arduino_LCD::Color565(uint8_t r, uint8_t g, uint8_t b) { return ((r & 0xF8) << 8) | ((g & 0xFC) << 3) | (b >> 3); } #define MADCTL_MY 0x80 #define MADCTL_MX 0x40 #define MADCTL_MV 0x20 #define MADCTL_ML 0x10 #define MADCTL_RGB 0x08 #define MADCTL_MH 0x04 void Arduino_LCD::setRotation(uint8_t m) { writecommand(ILI9163C_MADCTL); rotation = m % 4; // can't be higher than 3 switch (rotation) { case 0: writedata(MADCTL_MX | MADCTL_MY | MADCTL_RGB); _width = ILI9163C_TFTWIDTH; _height = ILI9163C_TFTHEIGHT; break; case 1: writedata(MADCTL_MY | MADCTL_MV | MADCTL_RGB); _width = ILI9163C_TFTHEIGHT; _height = ILI9163C_TFTWIDTH; break; case 2: writedata(MADCTL_RGB); _width = ILI9163C_TFTWIDTH; _height = ILI9163C_TFTHEIGHT; break; case 3: writedata(MADCTL_MX | MADCTL_MV | MADCTL_RGB); _width = ILI9163C_TFTHEIGHT; _height = ILI9163C_TFTWIDTH; break; } } void Arduino_LCD::invertDisplay(boolean i) { writecommand(i ? ILI9163C_INVON : ILI9163C_INVOFF); } /* 18, // there are 17 commands ILI9163C_SWRESET, DELAY, // 1: Software reset, no args, w/delay 50, // 50 ms delay 0x11, //Exit Sleep DELAY,50, 0x26, //Set Default Gamma 0x104, //0xF2, //E0h & E1h Enable/Disable //0x100, 0xB1, 0x10C, 0x114, 0xC0, //Set VRH1[4:0] & VC[2:0] for VCI1 & GVDD 0x10C, 0x105, 0xC1, //Set BT[2:0] for AVDD & VCL & VGH & VGL 0x102, 0xC5, //Set VMH[6:0] & VML[6:0] for VOMH & VCOML 0x129, 0x143, 0xC7, 0x140, 0x3a, //Set Color Format 0x105, 0x2A, //Set Column Address 0x100, 0x100, 0x100, 0x17F, 0x2B, //Set Page Address 0x100, 0x100, 0x100, 0x19F, 0x36, //Set Scanning Direction, RGB 0x1C0, 0xB7, //Set Source Output Direction 0x100, 0xf2, //Enable Gamma bit 0x101, 0xE0, 0x136,//p1 0x129,//p2 0x112,//p3 0x122,//p4 0x11C,//p5 0x115,//p6 0x142,//p7 0x1B7,//p8 0x12F,//p9 0x113,//p10 0x112,//p11 0x10A,//p12 0x111,//p13 0x10B,//p14 0x106,//p15 0xE1, 0x109,//p1 0x116,//p2 0x12D,//p3 0x10D,//p4 0x113,//p5 0x115,//p6 0x140,//p7 0x148,//p8 0x153,//p9 0x10C,//p10 0x11D,//p11 0x125,//p12 0x12E,//p13 0x134,//p14 0x139,//p15 0x33, // scroll setup 0x100, 0x100, 0x100, 0x1C1, 0x100, 0x100, 0x29, // Display On 0x2C}, // write gram */