/* Copyright (c) 2013 Arduino LLC. All right reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include "Bridge.h" BridgeClass::BridgeClass(Stream &_stream) : index(0), stream(_stream), started(false), max_retries(0) { // Empty } void BridgeClass::begin() { if (started) return; started = true; // Wait for U-boot to finish startup do { dropAll(); delay(1000); } while (stream.available() > 0); while (true) { // Bridge interrupt: // - Ask the bridge to close itself uint8_t quit_cmd[] = {'X', 'X', 'X', 'X', 'X'}; max_retries = 1; transfer(quit_cmd, 5); // Bridge startup: // - If the bridge is not running starts it safely stream.print(CTRL_C); delay(250); stream.print(F("\n")); delay(250); stream.print(F("\n")); delay(500); // Wait for OpenWRT message // "Press enter to activate console" stream.print(F("run-bridge\n")); delay(500); dropAll(); // Reset the brigde to check if it is running uint8_t cmd[] = {'X', 'X', '1', '0', '0'}; uint8_t res[4]; max_retries = 50; uint16_t l = transfer(cmd, 5, res, 4); if (l == TRANSFER_TIMEOUT) { // Bridge didn't start... // Maybe the board is starting-up? // Wait and retry delay(1000); continue; } if (res[0] != 0) while (true); // Detect bridge version if (l == 4) { bridgeVersion = (res[1]-'0')*100 + (res[2]-'0')*10 + (res[3]-'0'); } else { // Bridge v1.0.0 didn't send any version info bridgeVersion = 100; } max_retries = 50; return; } } void BridgeClass::put(const char *key, const char *value) { // TODO: do it in a more efficient way String cmd = "D"; cmd += key; cmd += "\xFE"; cmd += value; transfer((uint8_t*)cmd.c_str(), cmd.length()); } unsigned int BridgeClass::get(const char *key, uint8_t *value, unsigned int maxlen) { uint8_t cmd[] = {'d'}; unsigned int l = transfer(cmd, 1, (uint8_t *)key, strlen(key), value, maxlen); if (l < maxlen) value[l] = 0; // Zero-terminate string return l; } #if defined(ARDUINO_ARCH_AVR) // AVR use an optimized implementation of CRC #include #else // Generic implementation for non-AVR architectures uint16_t _crc_ccitt_update(uint16_t crc, uint8_t data) { data ^= crc & 0xff; data ^= data << 4; return ((((uint16_t)data << 8) | ((crc >> 8) & 0xff)) ^ (uint8_t)(data >> 4) ^ ((uint16_t)data << 3)); } #endif void BridgeClass::crcUpdate(uint8_t c) { CRC = _crc_ccitt_update(CRC, c); } void BridgeClass::crcReset() { CRC = 0xFFFF; } void BridgeClass::crcWrite() { stream.write((char)(CRC >> 8)); stream.write((char)(CRC & 0xFF)); } bool BridgeClass::crcCheck(uint16_t _CRC) { return CRC == _CRC; } uint16_t BridgeClass::transfer(const uint8_t *buff1, uint16_t len1, const uint8_t *buff2, uint16_t len2, const uint8_t *buff3, uint16_t len3, uint8_t *rxbuff, uint16_t rxlen) { uint16_t len = len1 + len2 + len3; uint8_t retries = 0; for ( ; retries < max_retries; retries++, delay(100), dropAll() /* Delay for retransmission */) { // Send packet crcReset(); stream.write((char)0xFF); // Start of packet (0xFF) crcUpdate(0xFF); stream.write((char)index); // Message index crcUpdate(index); stream.write((char)((len >> 8) & 0xFF)); // Message length (hi) crcUpdate((len >> 8) & 0xFF); stream.write((char)(len & 0xFF)); // Message length (lo) crcUpdate(len & 0xFF); for (uint16_t i = 0; i < len1; i++) { // Payload stream.write((char)buff1[i]); crcUpdate(buff1[i]); } for (uint16_t i = 0; i < len2; i++) { // Payload stream.write((char)buff2[i]); crcUpdate(buff2[i]); } for (uint16_t i = 0; i < len3; i++) { // Payload stream.write((char)buff3[i]); crcUpdate(buff3[i]); } crcWrite(); // CRC // Wait for ACK in 100ms if (timedRead(100) != 0xFF) continue; crcReset(); crcUpdate(0xFF); // Check packet index if (timedRead(5) != index) continue; crcUpdate(index); // Recv len int lh = timedRead(10); if (lh < 0) continue; crcUpdate(lh); int ll = timedRead(10); if (ll < 0) continue; crcUpdate(ll); uint16_t l = lh; l <<= 8; l += ll; // Recv data for (uint16_t i = 0; i < l; i++) { int c = timedRead(5); if (c < 0) continue; // Cut received data if rxbuffer is too small if (i < rxlen) rxbuff[i] = c; crcUpdate(c); } // Check CRC int crc_hi = timedRead(5); if (crc_hi < 0) continue; int crc_lo = timedRead(5); if (crc_lo < 0) continue; if (!crcCheck((crc_hi << 8) + crc_lo)) continue; // Increase index index++; // Return bytes received if (l > rxlen) return rxlen; return l; } // Max retries exceeded return TRANSFER_TIMEOUT; } int BridgeClass::timedRead(unsigned int timeout) { int c; unsigned long _startMillis = millis(); do { c = stream.read(); if (c >= 0) return c; } while (millis() - _startMillis < timeout); return -1; // -1 indicates timeout } void BridgeClass::dropAll() { while (stream.available() > 0) { stream.read(); } } // Bridge instance #ifdef __AVR_ATmega32U4__ // Leonardo variants (where HardwareSerial is Serial1) SerialBridgeClass Bridge(Serial1); #else SerialBridgeClass Bridge(Serial); #endif