1 | /*
|
---|
2 | Console Pixel
|
---|
3 |
|
---|
4 | An example of using the Arduino board to receive data from the
|
---|
5 | Console on the Arduino Y炭n. In this case, the Arduino boards turns on an LED when
|
---|
6 | it receives the character 'H', and turns off the LED when it
|
---|
7 | receives the character 'L'.
|
---|
8 |
|
---|
9 | To see the Console, pick your Y炭n's name and IP address in the Port menu
|
---|
10 | then open the Port Monitor. You can also see it by opening a terminal window
|
---|
11 | and typing
|
---|
12 | ssh root@ yourYunsName.local 'telnet localhost 6571'
|
---|
13 | then pressing enter. When prompted for the password, enter it.
|
---|
14 |
|
---|
15 |
|
---|
16 | The circuit:
|
---|
17 | * LED connected from digital pin 13 to ground
|
---|
18 |
|
---|
19 | created 2006
|
---|
20 | by David A. Mellis
|
---|
21 | modified 25 Jun 2013
|
---|
22 | by Tom Igoe
|
---|
23 |
|
---|
24 | This example code is in the public domain.
|
---|
25 |
|
---|
26 | http://arduino.cc/en/Tutorial/ConsolePixel
|
---|
27 |
|
---|
28 | */
|
---|
29 |
|
---|
30 | #include <Console.h>
|
---|
31 |
|
---|
32 | const int ledPin = 13; // the pin that the LED is attached to
|
---|
33 | char incomingByte; // a variable to read incoming Console data into
|
---|
34 |
|
---|
35 | void setup() {
|
---|
36 | Bridge.begin(); // Initialize Bridge
|
---|
37 | Console.begin(); // Initialize Console
|
---|
38 |
|
---|
39 | // Wait for the Console port to connect
|
---|
40 | while (!Console);
|
---|
41 |
|
---|
42 | Console.println("type H or L to turn pin 13 on or off");
|
---|
43 |
|
---|
44 | // initialize the LED pin as an output:
|
---|
45 | pinMode(ledPin, OUTPUT);
|
---|
46 | }
|
---|
47 |
|
---|
48 | void loop() {
|
---|
49 | // see if there's incoming Console data:
|
---|
50 | if (Console.available() > 0) {
|
---|
51 | // read the oldest byte in the Console buffer:
|
---|
52 | incomingByte = Console.read();
|
---|
53 | Console.println(incomingByte);
|
---|
54 | // if it's a capital H (ASCII 72), turn on the LED:
|
---|
55 | if (incomingByte == 'H') {
|
---|
56 | digitalWrite(ledPin, HIGH);
|
---|
57 | }
|
---|
58 | // if it's an L (ASCII 76) turn off the LED:
|
---|
59 | if (incomingByte == 'L') {
|
---|
60 | digitalWrite(ledPin, LOW);
|
---|
61 | }
|
---|
62 | }
|
---|
63 | }
|
---|
64 |
|
---|