/** * \file * * \brief Instance description for EIC * * Copyright (c) 2014 Atmel Corporation. All rights reserved. * * \asf_license_start * * \page License * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of Atmel may not be used to endorse or promote products derived * from this software without specific prior written permission. * * 4. This software may only be redistributed and used in connection with an * Atmel microcontroller product. * * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * \asf_license_stop * */ #ifndef _SAMD21_EIC_INSTANCE_ #define _SAMD21_EIC_INSTANCE_ /* ========== Register definition for EIC peripheral ========== */ #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) #define REG_EIC_CTRL (0x40001800U) /**< \brief (EIC) Control */ #define REG_EIC_STATUS (0x40001801U) /**< \brief (EIC) Status */ #define REG_EIC_NMICTRL (0x40001802U) /**< \brief (EIC) Non-Maskable Interrupt Control */ #define REG_EIC_NMIFLAG (0x40001803U) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */ #define REG_EIC_EVCTRL (0x40001804U) /**< \brief (EIC) Event Control */ #define REG_EIC_INTENCLR (0x40001808U) /**< \brief (EIC) Interrupt Enable Clear */ #define REG_EIC_INTENSET (0x4000180CU) /**< \brief (EIC) Interrupt Enable Set */ #define REG_EIC_INTFLAG (0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear */ #define REG_EIC_WAKEUP (0x40001814U) /**< \brief (EIC) Wake-Up Enable */ #define REG_EIC_CONFIG0 (0x40001818U) /**< \brief (EIC) Configuration 0 */ #define REG_EIC_CONFIG1 (0x4000181CU) /**< \brief (EIC) Configuration 1 */ #else #define REG_EIC_CTRL (*(RwReg8 *)0x40001800U) /**< \brief (EIC) Control */ #define REG_EIC_STATUS (*(RoReg8 *)0x40001801U) /**< \brief (EIC) Status */ #define REG_EIC_NMICTRL (*(RwReg8 *)0x40001802U) /**< \brief (EIC) Non-Maskable Interrupt Control */ #define REG_EIC_NMIFLAG (*(RwReg8 *)0x40001803U) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */ #define REG_EIC_EVCTRL (*(RwReg *)0x40001804U) /**< \brief (EIC) Event Control */ #define REG_EIC_INTENCLR (*(RwReg *)0x40001808U) /**< \brief (EIC) Interrupt Enable Clear */ #define REG_EIC_INTENSET (*(RwReg *)0x4000180CU) /**< \brief (EIC) Interrupt Enable Set */ #define REG_EIC_INTFLAG (*(RwReg *)0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear */ #define REG_EIC_WAKEUP (*(RwReg *)0x40001814U) /**< \brief (EIC) Wake-Up Enable */ #define REG_EIC_CONFIG0 (*(RwReg *)0x40001818U) /**< \brief (EIC) Configuration 0 */ #define REG_EIC_CONFIG1 (*(RwReg *)0x4000181CU) /**< \brief (EIC) Configuration 1 */ #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* ========== Instance parameters for EIC peripheral ========== */ #define EIC_CONFIG_NUM ((EIC_USABLE_EXTINT_NUM+7)/8) #define EIC_EXTINT_NUM 18 #define EIC_GCLK_ID 5 #endif /* _SAMD21_EIC_INSTANCE_ */