source: rtos_arduino/trunk/arduino_lib/hardware/tools/CMSIS/Device/ATMEL/samd21/include/instance/eic.h@ 136

Last change on this file since 136 was 136, checked in by ertl-honda, 8 years ago

ライブラリとOS及びベーシックなサンプルの追加．
File size: 4.3 KB
Line 
1/**
2 * \file
3 *
4 * \brief Instance description for EIC
5 *
6 * Copyright (c) 2014 Atmel Corporation. All rights reserved.
7 *
8 * \asf_license_start
9 *
10 * \page License
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions are met:
14 *
15 * 1. Redistributions of source code must retain the above copyright notice,
16 * this list of conditions and the following disclaimer.
17 *
18 * 2. Redistributions in binary form must reproduce the above copyright notice,
19 * this list of conditions and the following disclaimer in the documentation
20 * and/or other materials provided with the distribution.
21 *
22 * 3. The name of Atmel may not be used to endorse or promote products derived
23 * from this software without specific prior written permission.
24 *
25 * 4. This software may only be redistributed and used in connection with an
26 * Atmel microcontroller product.
27 *
28 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
29 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
30 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
31 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
32 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
37 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38 * POSSIBILITY OF SUCH DAMAGE.
39 *
40 * \asf_license_stop
41 *
42 */
43
44#ifndef _SAMD21_EIC_INSTANCE_
45#define _SAMD21_EIC_INSTANCE_
46
47/* ========== Register definition for EIC peripheral ========== */
48#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
49#define REG_EIC_CTRL (0x40001800U) /**< \brief (EIC) Control */
50#define REG_EIC_STATUS (0x40001801U) /**< \brief (EIC) Status */
51#define REG_EIC_NMICTRL (0x40001802U) /**< \brief (EIC) Non-Maskable Interrupt Control */
52#define REG_EIC_NMIFLAG (0x40001803U) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */
53#define REG_EIC_EVCTRL (0x40001804U) /**< \brief (EIC) Event Control */
54#define REG_EIC_INTENCLR (0x40001808U) /**< \brief (EIC) Interrupt Enable Clear */
55#define REG_EIC_INTENSET (0x4000180CU) /**< \brief (EIC) Interrupt Enable Set */
56#define REG_EIC_INTFLAG (0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear */
57#define REG_EIC_WAKEUP (0x40001814U) /**< \brief (EIC) Wake-Up Enable */
58#define REG_EIC_CONFIG0 (0x40001818U) /**< \brief (EIC) Configuration 0 */
59#define REG_EIC_CONFIG1 (0x4000181CU) /**< \brief (EIC) Configuration 1 */
60#else
61#define REG_EIC_CTRL (*(RwReg8 *)0x40001800U) /**< \brief (EIC) Control */
62#define REG_EIC_STATUS (*(RoReg8 *)0x40001801U) /**< \brief (EIC) Status */
63#define REG_EIC_NMICTRL (*(RwReg8 *)0x40001802U) /**< \brief (EIC) Non-Maskable Interrupt Control */
64#define REG_EIC_NMIFLAG (*(RwReg8 *)0x40001803U) /**< \brief (EIC) Non-Maskable Interrupt Flag Status and Clear */
65#define REG_EIC_EVCTRL (*(RwReg *)0x40001804U) /**< \brief (EIC) Event Control */
66#define REG_EIC_INTENCLR (*(RwReg *)0x40001808U) /**< \brief (EIC) Interrupt Enable Clear */
67#define REG_EIC_INTENSET (*(RwReg *)0x4000180CU) /**< \brief (EIC) Interrupt Enable Set */
68#define REG_EIC_INTFLAG (*(RwReg *)0x40001810U) /**< \brief (EIC) Interrupt Flag Status and Clear */
69#define REG_EIC_WAKEUP (*(RwReg *)0x40001814U) /**< \brief (EIC) Wake-Up Enable */
70#define REG_EIC_CONFIG0 (*(RwReg *)0x40001818U) /**< \brief (EIC) Configuration 0 */
71#define REG_EIC_CONFIG1 (*(RwReg *)0x4000181CU) /**< \brief (EIC) Configuration 1 */
72#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
73
74/* ========== Instance parameters for EIC peripheral ========== */
75#define EIC_CONFIG_NUM ((EIC_USABLE_EXTINT_NUM+7)/8)
76#define EIC_EXTINT_NUM 18
77#define EIC_GCLK_ID 5
78
79#endif /* _SAMD21_EIC_INSTANCE_ */
Note: See TracBrowser for help on using the repository browser.