diff -r sbxbt_ps3_140113_org/btstack/config.h sbxbt_ps3_140113/btstack/config.h
4,6c4,6
< #define	ENABLE_LOG_DEBUG
< #define	ENABLE_LOG_INFO
< #define	ENABLE_LOG_ERROR
---
> //#define	ENABLE_LOG_DEBUG
> //#define	ENABLE_LOG_INFO
> //#define	ENABLE_LOG_ERROR
diff -r sbxbt_ps3_140113_org/Common/uart1.c sbxbt_ps3_140113/Common/uart1.c
78c78
< #define	RXBUFSIZ			16
---
> #define	RXBUFSIZ			16*100
diff -r sbxbt_ps3_140113_org/global.h sbxbt_ps3_140113/global.h
30c30
< 	#define BAUDRATE1				2400		//UART1ボーレート
---
> 	#define BAUDRATE1				115200		//UART1ボーレート
117,120c117,128
< // Configure U1RX - put on pin 3 (RP23)
< #define	u1rx_setup()		(RPINR18bits.U1RXR = 23)
< // Configure U1TX - put on pin 2 (RP22)
< #define u1tx_setup()		(RPOR11bits.RP22R = 3)
---
> //// Configure U1RX - put on pin 3 (RP23)
> //#define	u1rx_setup()		(RPINR18bits.U1RXR = 23)
> 
> // Configure U1RX - put on pin 22(PGFC1) (RP1)  board pin 5
> #define	u1rx_setup()		(RPINR18bits.U1RXR = 1)
> 
> //// Configure U1TX - put on pin 2 (RP22)
> //#define u1tx_setup()		(RPOR11bits.RP22R = 3)
> 
> // Configure U1TX - put on pin 21(PGFD1) (RP0)  board pin 4
> #define u1tx_setup()		(RPOR0bits.RP0R = 3)
> 
diff -r sbxbt_ps3_140113_org/main.c sbxbt_ps3_140113/main.c
44c44
< char							lineBuffer[50];
---
> char							lineBuffer[50*10];
sbxbt_ps3_140113/output 縺ｮ縺ｿ縺ｫ蟄伜惠: sbxbt_ps3.map
sbxbt_ps3_140113 縺ｮ縺ｿ縺ｫ蟄伜惠: PS3-um-2.pdf