/** * \file camellia.h * * \brief Camellia block cipher */ /* * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * This file is part of mbed TLS (https://tls.mbed.org) */ #ifndef MBEDTLS_CAMELLIA_H #define MBEDTLS_CAMELLIA_H #if !defined(MBEDTLS_CONFIG_FILE) #include "config.h" #else #include MBEDTLS_CONFIG_FILE #endif #include #include #include "platform_util.h" #define MBEDTLS_CAMELLIA_ENCRYPT 1 #define MBEDTLS_CAMELLIA_DECRYPT 0 #if !defined(MBEDTLS_DEPRECATED_REMOVED) #define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 ) #endif /* !MBEDTLS_DEPRECATED_REMOVED */ #define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */ #define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */ /* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used. */ #define MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED -0x0027 /**< Camellia hardware accelerator failed. */ #ifdef __cplusplus extern "C" { #endif #if !defined(MBEDTLS_CAMELLIA_ALT) // Regular implementation // /** * \brief CAMELLIA context structure */ typedef struct mbedtls_camellia_context { int nr; /*!< number of rounds */ uint32_t rk[68]; /*!< CAMELLIA round keys */ } mbedtls_camellia_context; #else /* MBEDTLS_CAMELLIA_ALT */ #include "camellia_alt.h" #endif /* MBEDTLS_CAMELLIA_ALT */ /** * \brief Initialize a CAMELLIA context. * * \param ctx The CAMELLIA context to be initialized. * This must not be \c NULL. */ void mbedtls_camellia_init( mbedtls_camellia_context *ctx ); /** * \brief Clear a CAMELLIA context. * * \param ctx The CAMELLIA context to be cleared. This may be \c NULL, * in which case this function returns immediately. If it is not * \c NULL, it must be initialized. */ void mbedtls_camellia_free( mbedtls_camellia_context *ctx ); /** * \brief Perform a CAMELLIA key schedule operation for encryption. * * \param ctx The CAMELLIA context to use. This must be initialized. * \param key The encryption key to use. This must be a readable buffer * of size \p keybits Bits. * \param keybits The length of \p key in Bits. This must be either \c 128, * \c 192 or \c 256. * * \return \c 0 if successful. * \return A negative error code on failure. */ int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key, unsigned int keybits ); /** * \brief Perform a CAMELLIA key schedule operation for decryption. * * \param ctx The CAMELLIA context to use. This must be initialized. * \param key The decryption key. This must be a readable buffer * of size \p keybits Bits. * \param keybits The length of \p key in Bits. This must be either \c 128, * \c 192 or \c 256. * * \return \c 0 if successful. * \return A negative error code on failure. */ int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key, unsigned int keybits ); /** * \brief Perform a CAMELLIA-ECB block encryption/decryption operation. * * \param ctx The CAMELLIA context to use. This must be initialized * and bound to a key. * \param mode The mode of operation. This must be either * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. * \param input The input block. This must be a readable buffer * of size \c 16 Bytes. * \param output The output block. This must be a writable buffer * of size \c 16 Bytes. * * \return \c 0 if successful. * \return A negative error code on failure. */ int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx, int mode, const unsigned char input[16], unsigned char output[16] ); #if defined(MBEDTLS_CIPHER_MODE_CBC) /** * \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation. * * \note Upon exit, the content of the IV is updated so that you can * call the function same function again on the following * block(s) of data and get the same result as if it was * encrypted in one call. This allows a "streaming" usage. * If on the other hand you need to retain the contents of the * IV, you should either save it manually or use the cipher * module instead. * * \param ctx The CAMELLIA context to use. This must be initialized * and bound to a key. * \param mode The mode of operation. This must be either * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. * \param length The length in Bytes of the input data \p input. * This must be a multiple of \c 16 Bytes. * \param iv The initialization vector. This must be a read/write buffer * of length \c 16 Bytes. It is updated to allow streaming * use as explained above. * \param input The buffer holding the input data. This must point to a * readable buffer of length \p length Bytes. * \param output The buffer holding the output data. This must point to a * writable buffer of length \p length Bytes. * * \return \c 0 if successful. * \return A negative error code on failure. */ int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx, int mode, size_t length, unsigned char iv[16], const unsigned char *input, unsigned char *output ); #endif /* MBEDTLS_CIPHER_MODE_CBC */ #if defined(MBEDTLS_CIPHER_MODE_CFB) /** * \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption * operation. * * \note Due to the nature of CFB mode, you should use the same * key for both encryption and decryption. In particular, calls * to this function should be preceded by a key-schedule via * mbedtls_camellia_setkey_enc() regardless of whether \p mode * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. * * \note Upon exit, the content of the IV is updated so that you can * call the function same function again on the following * block(s) of data and get the same result as if it was * encrypted in one call. This allows a "streaming" usage. * If on the other hand you need to retain the contents of the * IV, you should either save it manually or use the cipher * module instead. * * \param ctx The CAMELLIA context to use. This must be initialized * and bound to a key. * \param mode The mode of operation. This must be either * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. * \param length The length of the input data \p input. Any value is allowed. * \param iv_off The current offset in the IV. This must be smaller * than \c 16 Bytes. It is updated after this call to allow * the aforementioned streaming usage. * \param iv The initialization vector. This must be a read/write buffer * of length \c 16 Bytes. It is updated after this call to * allow the aforementioned streaming usage. * \param input The buffer holding the input data. This must be a readable * buffer of size \p length Bytes. * \param output The buffer to hold the output data. This must be a writable * buffer of length \p length Bytes. * * \return \c 0 if successful. * \return A negative error code on failure. */ int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx, int mode, size_t length, size_t *iv_off, unsigned char iv[16], const unsigned char *input, unsigned char *output ); #endif /* MBEDTLS_CIPHER_MODE_CFB */ #if defined(MBEDTLS_CIPHER_MODE_CTR) /** * \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation. * * *note Due to the nature of CTR mode, you should use the same * key for both encryption and decryption. In particular, calls * to this function should be preceded by a key-schedule via * mbedtls_camellia_setkey_enc() regardless of whether \p mode * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. * * \warning You must never reuse a nonce value with the same key. Doing so * would void the encryption for the two messages encrypted with * the same nonce and key. * * There are two common strategies for managing nonces with CTR: * * 1. You can handle everything as a single message processed over * successive calls to this function. In that case, you want to * set \p nonce_counter and \p nc_off to 0 for the first call, and * then preserve the values of \p nonce_counter, \p nc_off and \p * stream_block across calls to this function as they will be * updated by this function. * * With this strategy, you must not encrypt more than 2**128 * blocks of data with the same key. * * 2. You can encrypt separate messages by dividing the \p * nonce_counter buffer in two areas: the first one used for a * per-message nonce, handled by yourself, and the second one * updated by this function internally. * * For example, you might reserve the first \c 12 Bytes for the * per-message nonce, and the last \c 4 Bytes for internal use. * In that case, before calling this function on a new message you * need to set the first \c 12 Bytes of \p nonce_counter to your * chosen nonce value, the last four to \c 0, and \p nc_off to \c 0 * (which will cause \p stream_block to be ignored). That way, you * can encrypt at most \c 2**96 messages of up to \c 2**32 blocks * each with the same key. * * The per-message nonce (or information sufficient to reconstruct * it) needs to be communicated with the ciphertext and must be * unique. The recommended way to ensure uniqueness is to use a * message counter. An alternative is to generate random nonces, * but this limits the number of messages that can be securely * encrypted: for example, with 96-bit random nonces, you should * not encrypt more than 2**32 messages with the same key. * * Note that for both stategies, sizes are measured in blocks and * that a CAMELLIA block is \c 16 Bytes. * * \warning Upon return, \p stream_block contains sensitive data. Its * content must not be written to insecure storage and should be * securely discarded as soon as it's no longer needed. * * \param ctx The CAMELLIA context to use. This must be initialized * and bound to a key. * \param length The length of the input data \p input in Bytes. * Any value is allowed. * \param nc_off The offset in the current \p stream_block (for resuming * within current cipher stream). The offset pointer to * should be \c 0 at the start of a stream. It is updated * at the end of this call. * \param nonce_counter The 128-bit nonce and counter. This must be a read/write * buffer of length \c 16 Bytes. * \param stream_block The saved stream-block for resuming. This must be a * read/write buffer of length \c 16 Bytes. * \param input The input data stream. This must be a readable buffer of * size \p length Bytes. * \param output The output data stream. This must be a writable buffer * of size \p length Bytes. * * \return \c 0 if successful. * \return A negative error code on failure. */ int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx, size_t length, size_t *nc_off, unsigned char nonce_counter[16], unsigned char stream_block[16], const unsigned char *input, unsigned char *output ); #endif /* MBEDTLS_CIPHER_MODE_CTR */ #if defined(MBEDTLS_SELF_TEST) /** * \brief Checkup routine * * \return 0 if successful, or 1 if the test failed */ int mbedtls_camellia_self_test( int verbose ); #endif /* MBEDTLS_SELF_TEST */ #ifdef __cplusplus } #endif #endif /* camellia.h */