/* * ccp.c - PPP Compression Control Protocol. * * Copyright (c) 1994-2002 Paul Mackerras. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. The name(s) of the authors of this software must not be used to * endorse or promote products derived from this software without * prior written permission. * * 3. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by Paul Mackerras * ". * * THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES WITH REGARD TO * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS, IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include "netif/ppp/ppp_opts.h" #if PPP_SUPPORT && CCP_SUPPORT /* don't build if not configured for use in lwipopts.h */ #include #include #include "netif/ppp/ppp_impl.h" #include "netif/ppp/fsm.h" #include "netif/ppp/ccp.h" #if MPPE_SUPPORT #include "netif/ppp/lcp.h" /* lcp_close(), lcp_fsm */ #include "netif/ppp/mppe.h" /* mppe_init() */ #endif /* MPPE_SUPPORT */ /* * Unfortunately there is a bug in zlib which means that using a * size of 8 (window size = 256) for Deflate compression will cause * buffer overruns and kernel crashes in the deflate module. * Until this is fixed we only accept sizes in the range 9 .. 15. * Thanks to James Carlson for pointing this out. */ #define DEFLATE_MIN_WORKS 9 /* * Command-line options. */ #if PPP_OPTIONS static int setbsdcomp (char **); static int setdeflate (char **); static char bsd_value[8]; static char deflate_value[8]; /* * Option variables. */ #if MPPE_SUPPORT bool refuse_mppe_stateful = 1; /* Allow stateful mode? */ #endif /* MPPE_SUPPORT */ static option_t ccp_option_list[] = { { "noccp", o_bool, &ccp_protent.enabled_flag, "Disable CCP negotiation" }, { "-ccp", o_bool, &ccp_protent.enabled_flag, "Disable CCP negotiation", OPT_ALIAS }, { "bsdcomp", o_special, (void *)setbsdcomp, "Request BSD-Compress packet compression", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, bsd_value }, { "nobsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress, "don't allow BSD-Compress", OPT_PRIOSUB | OPT_A2CLR, &ccp_allowoptions[0].bsd_compress }, { "-bsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress, "don't allow BSD-Compress", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, &ccp_allowoptions[0].bsd_compress }, { "deflate", o_special, (void *)setdeflate, "request Deflate compression", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, deflate_value }, { "nodeflate", o_bool, &ccp_wantoptions[0].deflate, "don't allow Deflate compression", OPT_PRIOSUB | OPT_A2CLR, &ccp_allowoptions[0].deflate }, { "-deflate", o_bool, &ccp_wantoptions[0].deflate, "don't allow Deflate compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, &ccp_allowoptions[0].deflate }, { "nodeflatedraft", o_bool, &ccp_wantoptions[0].deflate_draft, "don't use draft deflate #", OPT_A2COPY, &ccp_allowoptions[0].deflate_draft }, { "predictor1", o_bool, &ccp_wantoptions[0].predictor_1, "request Predictor-1", OPT_PRIO | 1 }, { "nopredictor1", o_bool, &ccp_wantoptions[0].predictor_1, "don't allow Predictor-1", OPT_PRIOSUB | OPT_A2CLR, &ccp_allowoptions[0].predictor_1 }, { "-predictor1", o_bool, &ccp_wantoptions[0].predictor_1, "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, &ccp_allowoptions[0].predictor_1 }, #if MPPE_SUPPORT /* MPPE options are symmetrical ... we only set wantoptions here */ { "require-mppe", o_bool, &ccp_wantoptions[0].mppe, "require MPPE encryption", OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, { "+mppe", o_bool, &ccp_wantoptions[0].mppe, "require MPPE encryption", OPT_ALIAS | OPT_PRIO | MPPE_OPT_40 | MPPE_OPT_128 }, { "nomppe", o_bool, &ccp_wantoptions[0].mppe, "don't allow MPPE encryption", OPT_PRIO }, { "-mppe", o_bool, &ccp_wantoptions[0].mppe, "don't allow MPPE encryption", OPT_ALIAS | OPT_PRIO }, /* We use ccp_allowoptions[0].mppe as a junk var ... it is reset later */ { "require-mppe-40", o_bool, &ccp_allowoptions[0].mppe, "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, { "+mppe-40", o_bool, &ccp_allowoptions[0].mppe, "require MPPE 40-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, { "nomppe-40", o_bool, &ccp_allowoptions[0].mppe, "don't allow MPPE 40-bit encryption", OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, { "-mppe-40", o_bool, &ccp_allowoptions[0].mppe, "don't allow MPPE 40-bit encryption", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_40, &ccp_wantoptions[0].mppe }, { "require-mppe-128", o_bool, &ccp_allowoptions[0].mppe, "require MPPE 128-bit encryption", OPT_PRIO | OPT_A2OR | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, { "+mppe-128", o_bool, &ccp_allowoptions[0].mppe, "require MPPE 128-bit encryption", OPT_ALIAS | OPT_PRIO | OPT_A2OR | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, { "nomppe-128", o_bool, &ccp_allowoptions[0].mppe, "don't allow MPPE 128-bit encryption", OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, { "-mppe-128", o_bool, &ccp_allowoptions[0].mppe, "don't allow MPPE 128-bit encryption", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLRB | MPPE_OPT_128, &ccp_wantoptions[0].mppe }, /* strange one; we always request stateless, but will we allow stateful? */ { "mppe-stateful", o_bool, &refuse_mppe_stateful, "allow MPPE stateful mode", OPT_PRIO }, { "nomppe-stateful", o_bool, &refuse_mppe_stateful, "disallow MPPE stateful mode", OPT_PRIO | 1 }, #endif /* MPPE_SUPPORT */ { NULL } }; #endif /* PPP_OPTIONS */ /* * Protocol entry points from main code. */ static void ccp_init(ppp_pcb *pcb); static void ccp_open(ppp_pcb *pcb); static void ccp_close(ppp_pcb *pcb, const char *reason); static void ccp_lowerup(ppp_pcb *pcb); static void ccp_lowerdown(ppp_pcb *pcb); static void ccp_input(ppp_pcb *pcb, u_char *pkt, int len); static void ccp_protrej(ppp_pcb *pcb); #if PRINTPKT_SUPPORT static int ccp_printpkt(const u_char *p, int plen, void (*printer) (void *, const char *, ...), void *arg); #endif /* PRINTPKT_SUPPORT */ #if PPP_DATAINPUT static void ccp_datainput(ppp_pcb *pcb, u_char *pkt, int len); #endif /* PPP_DATAINPUT */ const struct protent ccp_protent = { PPP_CCP, ccp_init, ccp_input, ccp_protrej, ccp_lowerup, ccp_lowerdown, ccp_open, ccp_close, #if PRINTPKT_SUPPORT ccp_printpkt, #endif /* PRINTPKT_SUPPORT */ #if PPP_DATAINPUT ccp_datainput, #endif /* PPP_DATAINPUT */ #if PRINTPKT_SUPPORT "CCP", "Compressed", #endif /* PRINTPKT_SUPPORT */ #if PPP_OPTIONS ccp_option_list, NULL, #endif /* PPP_OPTIONS */ #if DEMAND_SUPPORT NULL, NULL #endif /* DEMAND_SUPPORT */ }; /* * Callbacks for fsm code. */ static void ccp_resetci (fsm *); static int ccp_cilen (fsm *); static void ccp_addci (fsm *, u_char *, int *); static int ccp_ackci (fsm *, u_char *, int); static int ccp_nakci (fsm *, u_char *, int, int); static int ccp_rejci (fsm *, u_char *, int); static int ccp_reqci (fsm *, u_char *, int *, int); static void ccp_up (fsm *); static void ccp_down (fsm *); static int ccp_extcode (fsm *, int, int, u_char *, int); static void ccp_rack_timeout (void *); static const char *method_name (ccp_options *, ccp_options *); static const fsm_callbacks ccp_callbacks = { ccp_resetci, ccp_cilen, ccp_addci, ccp_ackci, ccp_nakci, ccp_rejci, ccp_reqci, ccp_up, ccp_down, NULL, NULL, NULL, NULL, ccp_extcode, "CCP" }; /* * Do we want / did we get any compression? */ static int ccp_anycompress(ccp_options *opt) { return (0 #if DEFLATE_SUPPORT || (opt)->deflate #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT || (opt)->bsd_compress #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT || (opt)->predictor_1 || (opt)->predictor_2 #endif /* PREDICTOR_SUPPORT */ #if MPPE_SUPPORT || (opt)->mppe #endif /* MPPE_SUPPORT */ ); } /* * Local state (mainly for handling reset-reqs and reset-acks). */ #define RACK_PENDING 1 /* waiting for reset-ack */ #define RREQ_REPEAT 2 /* send another reset-req if no reset-ack */ #define RACKTIMEOUT 1 /* second */ #if PPP_OPTIONS /* * Option parsing */ static int setbsdcomp(argv) char **argv; { int rbits, abits; char *str, *endp; str = *argv; abits = rbits = strtol(str, &endp, 0); if (endp != str && *endp == ',') { str = endp + 1; abits = strtol(str, &endp, 0); } if (*endp != 0 || endp == str) { option_error("invalid parameter '%s' for bsdcomp option", *argv); return 0; } if ((rbits != 0 && (rbits < BSD_MIN_BITS || rbits > BSD_MAX_BITS)) || (abits != 0 && (abits < BSD_MIN_BITS || abits > BSD_MAX_BITS))) { option_error("bsdcomp option values must be 0 or %d .. %d", BSD_MIN_BITS, BSD_MAX_BITS); return 0; } if (rbits > 0) { ccp_wantoptions[0].bsd_compress = 1; ccp_wantoptions[0].bsd_bits = rbits; } else ccp_wantoptions[0].bsd_compress = 0; if (abits > 0) { ccp_allowoptions[0].bsd_compress = 1; ccp_allowoptions[0].bsd_bits = abits; } else ccp_allowoptions[0].bsd_compress = 0; ppp_slprintf(bsd_value, sizeof(bsd_value), rbits == abits? "%d": "%d,%d", rbits, abits); return 1; } static int setdeflate(argv) char **argv; { int rbits, abits; char *str, *endp; str = *argv; abits = rbits = strtol(str, &endp, 0); if (endp != str && *endp == ',') { str = endp + 1; abits = strtol(str, &endp, 0); } if (*endp != 0 || endp == str) { option_error("invalid parameter '%s' for deflate option", *argv); return 0; } if ((rbits != 0 && (rbits < DEFLATE_MIN_SIZE || rbits > DEFLATE_MAX_SIZE)) || (abits != 0 && (abits < DEFLATE_MIN_SIZE || abits > DEFLATE_MAX_SIZE))) { option_error("deflate option values must be 0 or %d .. %d", DEFLATE_MIN_SIZE, DEFLATE_MAX_SIZE); return 0; } if (rbits == DEFLATE_MIN_SIZE || abits == DEFLATE_MIN_SIZE) { if (rbits == DEFLATE_MIN_SIZE) rbits = DEFLATE_MIN_WORKS; if (abits == DEFLATE_MIN_SIZE) abits = DEFLATE_MIN_WORKS; warn("deflate option value of %d changed to %d to avoid zlib bug", DEFLATE_MIN_SIZE, DEFLATE_MIN_WORKS); } if (rbits > 0) { ccp_wantoptions[0].deflate = 1; ccp_wantoptions[0].deflate_size = rbits; } else ccp_wantoptions[0].deflate = 0; if (abits > 0) { ccp_allowoptions[0].deflate = 1; ccp_allowoptions[0].deflate_size = abits; } else ccp_allowoptions[0].deflate = 0; ppp_slprintf(deflate_value, sizeof(deflate_value), rbits == abits? "%d": "%d,%d", rbits, abits); return 1; } #endif /* PPP_OPTIONS */ /* * ccp_init - initialize CCP. */ static void ccp_init(ppp_pcb *pcb) { fsm *f = &pcb->ccp_fsm; f->pcb = pcb; f->protocol = PPP_CCP; f->callbacks = &ccp_callbacks; fsm_init(f); #if 0 /* Not necessary, everything is cleared in ppp_new() */ memset(wo, 0, sizeof(*wo)); memset(go, 0, sizeof(*go)); memset(ao, 0, sizeof(*ao)); memset(ho, 0, sizeof(*ho)); #endif /* 0 */ #if DEFLATE_SUPPORT wo->deflate = 1; wo->deflate_size = DEFLATE_MAX_SIZE; wo->deflate_correct = 1; wo->deflate_draft = 1; ao->deflate = 1; ao->deflate_size = DEFLATE_MAX_SIZE; ao->deflate_correct = 1; ao->deflate_draft = 1; #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT wo->bsd_compress = 1; wo->bsd_bits = BSD_MAX_BITS; ao->bsd_compress = 1; ao->bsd_bits = BSD_MAX_BITS; #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT ao->predictor_1 = 1; #endif /* PREDICTOR_SUPPORT */ } /* * ccp_open - CCP is allowed to come up. */ static void ccp_open(ppp_pcb *pcb) { fsm *f = &pcb->ccp_fsm; ccp_options *go = &pcb->ccp_gotoptions; if (f->state != PPP_FSM_OPENED) ccp_set(pcb, 1, 0, 0, 0); /* * Find out which compressors the kernel supports before * deciding whether to open in silent mode. */ ccp_resetci(f); if (!ccp_anycompress(go)) f->flags |= OPT_SILENT; fsm_open(f); } /* * ccp_close - Terminate CCP. */ static void ccp_close(ppp_pcb *pcb, const char *reason) { fsm *f = &pcb->ccp_fsm; ccp_set(pcb, 0, 0, 0, 0); fsm_close(f, reason); } /* * ccp_lowerup - we may now transmit CCP packets. */ static void ccp_lowerup(ppp_pcb *pcb) { fsm *f = &pcb->ccp_fsm; fsm_lowerup(f); } /* * ccp_lowerdown - we may not transmit CCP packets. */ static void ccp_lowerdown(ppp_pcb *pcb) { fsm *f = &pcb->ccp_fsm; fsm_lowerdown(f); } /* * ccp_input - process a received CCP packet. */ static void ccp_input(ppp_pcb *pcb, u_char *p, int len) { fsm *f = &pcb->ccp_fsm; ccp_options *go = &pcb->ccp_gotoptions; int oldstate; /* * Check for a terminate-request so we can print a message. */ oldstate = f->state; fsm_input(f, p, len); if (oldstate == PPP_FSM_OPENED && p[0] == TERMREQ && f->state != PPP_FSM_OPENED) { ppp_notice("Compression disabled by peer."); #if MPPE_SUPPORT if (go->mppe) { ppp_error("MPPE disabled, closing LCP"); lcp_close(pcb, "MPPE disabled by peer"); } #endif /* MPPE_SUPPORT */ } /* * If we get a terminate-ack and we're not asking for compression, * close CCP. */ if (oldstate == PPP_FSM_REQSENT && p[0] == TERMACK && !ccp_anycompress(go)) ccp_close(pcb, "No compression negotiated"); } /* * Handle a CCP-specific code. */ static int ccp_extcode(fsm *f, int code, int id, u_char *p, int len) { ppp_pcb *pcb = f->pcb; LWIP_UNUSED_ARG(p); LWIP_UNUSED_ARG(len); switch (code) { case CCP_RESETREQ: if (f->state != PPP_FSM_OPENED) break; ccp_reset_comp(pcb); /* send a reset-ack, which the transmitter will see and reset its compression state. */ fsm_sdata(f, CCP_RESETACK, id, NULL, 0); break; case CCP_RESETACK: if ((pcb->ccp_localstate & RACK_PENDING) && id == f->reqid) { pcb->ccp_localstate &= ~(RACK_PENDING | RREQ_REPEAT); UNTIMEOUT(ccp_rack_timeout, f); ccp_reset_decomp(pcb); } break; default: return 0; } return 1; } /* * ccp_protrej - peer doesn't talk CCP. */ static void ccp_protrej(ppp_pcb *pcb) { fsm *f = &pcb->ccp_fsm; #if MPPE_SUPPORT ccp_options *go = &pcb->ccp_gotoptions; #endif /* MPPE_SUPPORT */ ccp_set(pcb, 0, 0, 0, 0); fsm_lowerdown(f); #if MPPE_SUPPORT if (go->mppe) { ppp_error("MPPE required but peer negotiation failed"); lcp_close(pcb, "MPPE required but peer negotiation failed"); } #endif /* MPPE_SUPPORT */ } /* * ccp_resetci - initialize at start of negotiation. */ static void ccp_resetci(fsm *f) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; ccp_options *wo = &pcb->ccp_wantoptions; #if MPPE_SUPPORT ccp_options *ao = &pcb->ccp_allowoptions; #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT || BSDCOMPRESS_SUPPORT || PREDICTOR_SUPPORT u_char opt_buf[CCP_MAX_OPTION_LENGTH]; #endif /* DEFLATE_SUPPORT || BSDCOMPRESS_SUPPORT || PREDICTOR_SUPPORT */ #if DEFLATE_SUPPORT || BSDCOMPRESS_SUPPORT int res; #endif /* DEFLATE_SUPPORT || BSDCOMPRESS_SUPPORT */ #if MPPE_SUPPORT if (pcb->settings.require_mppe) { wo->mppe = ao->mppe = (pcb->settings.refuse_mppe_40 ? 0 : MPPE_OPT_40) | (pcb->settings.refuse_mppe_128 ? 0 : MPPE_OPT_128); } #endif /* MPPE_SUPPORT */ *go = *wo; pcb->ccp_all_rejected = 0; #if MPPE_SUPPORT if (go->mppe) { int auth_mschap_bits = pcb->auth_done; int numbits; /* * Start with a basic sanity check: mschap[v2] auth must be in * exactly one direction. RFC 3079 says that the keys are * 'derived from the credentials of the peer that initiated the call', * however the PPP protocol doesn't have such a concept, and pppd * cannot get this info externally. Instead we do the best we can. * NB: If MPPE is required, all other compression opts are invalid. * So, we return right away if we can't do it. */ /* Leave only the mschap auth bits set */ auth_mschap_bits &= (CHAP_MS_WITHPEER | CHAP_MS_PEER | CHAP_MS2_WITHPEER | CHAP_MS2_PEER); /* Count the mschap auths */ auth_mschap_bits >>= CHAP_MS_SHIFT; numbits = 0; do { numbits += auth_mschap_bits & 1; auth_mschap_bits >>= 1; } while (auth_mschap_bits); if (numbits > 1) { ppp_error("MPPE required, but auth done in both directions."); lcp_close(pcb, "MPPE required but not available"); return; } if (!numbits) { ppp_error("MPPE required, but MS-CHAP[v2] auth not performed."); lcp_close(pcb, "MPPE required but not available"); return; } /* A plugin (eg radius) may not have obtained key material. */ if (!pcb->mppe_keys_set) { ppp_error("MPPE required, but keys are not available. " "Possible plugin problem?"); lcp_close(pcb, "MPPE required but not available"); return; } /* LM auth not supported for MPPE */ if (pcb->auth_done & (CHAP_MS_WITHPEER | CHAP_MS_PEER)) { /* This might be noise */ if (go->mppe & MPPE_OPT_40) { ppp_notice("Disabling 40-bit MPPE; MS-CHAP LM not supported"); go->mppe &= ~MPPE_OPT_40; wo->mppe &= ~MPPE_OPT_40; } } /* Last check: can we actually negotiate something? */ if (!(go->mppe & (MPPE_OPT_40 | MPPE_OPT_128))) { /* Could be misconfig, could be 40-bit disabled above. */ ppp_error("MPPE required, but both 40-bit and 128-bit disabled."); lcp_close(pcb, "MPPE required but not available"); return; } /* sync options */ ao->mppe = go->mppe; /* MPPE is not compatible with other compression types */ #if BSDCOMPRESS_SUPPORT ao->bsd_compress = go->bsd_compress = 0; #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT ao->predictor_1 = go->predictor_1 = 0; ao->predictor_2 = go->predictor_2 = 0; #endif /* PREDICTOR_SUPPORT */ #if DEFLATE_SUPPORT ao->deflate = go->deflate = 0; #endif /* DEFLATE_SUPPORT */ } #endif /* MPPE_SUPPORT */ /* * Check whether the kernel knows about the various * compression methods we might request. */ #if BSDCOMPRESS_SUPPORT /* FIXME: we don't need to test if BSD compress is available * if BSDCOMPRESS_SUPPORT is set, it is. */ if (go->bsd_compress) { opt_buf[0] = CI_BSD_COMPRESS; opt_buf[1] = CILEN_BSD_COMPRESS; for (;;) { if (go->bsd_bits < BSD_MIN_BITS) { go->bsd_compress = 0; break; } opt_buf[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits); res = ccp_test(pcb, opt_buf, CILEN_BSD_COMPRESS, 0); if (res > 0) { break; } else if (res < 0) { go->bsd_compress = 0; break; } go->bsd_bits--; } } #endif /* BSDCOMPRESS_SUPPORT */ #if DEFLATE_SUPPORT /* FIXME: we don't need to test if deflate is available * if DEFLATE_SUPPORT is set, it is. */ if (go->deflate) { if (go->deflate_correct) { opt_buf[0] = CI_DEFLATE; opt_buf[1] = CILEN_DEFLATE; opt_buf[3] = DEFLATE_CHK_SEQUENCE; for (;;) { if (go->deflate_size < DEFLATE_MIN_WORKS) { go->deflate_correct = 0; break; } opt_buf[2] = DEFLATE_MAKE_OPT(go->deflate_size); res = ccp_test(pcb, opt_buf, CILEN_DEFLATE, 0); if (res > 0) { break; } else if (res < 0) { go->deflate_correct = 0; break; } go->deflate_size--; } } if (go->deflate_draft) { opt_buf[0] = CI_DEFLATE_DRAFT; opt_buf[1] = CILEN_DEFLATE; opt_buf[3] = DEFLATE_CHK_SEQUENCE; for (;;) { if (go->deflate_size < DEFLATE_MIN_WORKS) { go->deflate_draft = 0; break; } opt_buf[2] = DEFLATE_MAKE_OPT(go->deflate_size); res = ccp_test(pcb, opt_buf, CILEN_DEFLATE, 0); if (res > 0) { break; } else if (res < 0) { go->deflate_draft = 0; break; } go->deflate_size--; } } if (!go->deflate_correct && !go->deflate_draft) go->deflate = 0; } #endif /* DEFLATE_SUPPORT */ #if PREDICTOR_SUPPORT /* FIXME: we don't need to test if predictor is available, * if PREDICTOR_SUPPORT is set, it is. */ if (go->predictor_1) { opt_buf[0] = CI_PREDICTOR_1; opt_buf[1] = CILEN_PREDICTOR_1; if (ccp_test(pcb, opt_buf, CILEN_PREDICTOR_1, 0) <= 0) go->predictor_1 = 0; } if (go->predictor_2) { opt_buf[0] = CI_PREDICTOR_2; opt_buf[1] = CILEN_PREDICTOR_2; if (ccp_test(pcb, opt_buf, CILEN_PREDICTOR_2, 0) <= 0) go->predictor_2 = 0; } #endif /* PREDICTOR_SUPPORT */ } /* * ccp_cilen - Return total length of our configuration info. */ static int ccp_cilen(fsm *f) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; return 0 #if BSDCOMPRESS_SUPPORT + (go->bsd_compress? CILEN_BSD_COMPRESS: 0) #endif /* BSDCOMPRESS_SUPPORT */ #if DEFLATE_SUPPORT + (go->deflate && go->deflate_correct? CILEN_DEFLATE: 0) + (go->deflate && go->deflate_draft? CILEN_DEFLATE: 0) #endif /* DEFLATE_SUPPORT */ #if PREDICTOR_SUPPORT + (go->predictor_1? CILEN_PREDICTOR_1: 0) + (go->predictor_2? CILEN_PREDICTOR_2: 0) #endif /* PREDICTOR_SUPPORT */ #if MPPE_SUPPORT + (go->mppe? CILEN_MPPE: 0) #endif /* MPPE_SUPPORT */ ; } /* * ccp_addci - put our requests in a packet. */ static void ccp_addci(fsm *f, u_char *p, int *lenp) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; u_char *p0 = p; /* * Add the compression types that we can receive, in decreasing * preference order. */ #if MPPE_SUPPORT if (go->mppe) { p[0] = CI_MPPE; p[1] = CILEN_MPPE; MPPE_OPTS_TO_CI(go->mppe, &p[2]); mppe_init(pcb, &pcb->mppe_decomp, go->mppe); p += CILEN_MPPE; } #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT if (go->deflate) { if (go->deflate_correct) { p[0] = CI_DEFLATE; p[1] = CILEN_DEFLATE; p[2] = DEFLATE_MAKE_OPT(go->deflate_size); p[3] = DEFLATE_CHK_SEQUENCE; p += CILEN_DEFLATE; } if (go->deflate_draft) { p[0] = CI_DEFLATE_DRAFT; p[1] = CILEN_DEFLATE; p[2] = p[2 - CILEN_DEFLATE]; p[3] = DEFLATE_CHK_SEQUENCE; p += CILEN_DEFLATE; } } #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT if (go->bsd_compress) { p[0] = CI_BSD_COMPRESS; p[1] = CILEN_BSD_COMPRESS; p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits); p += CILEN_BSD_COMPRESS; } #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT /* XXX Should Predictor 2 be preferable to Predictor 1? */ if (go->predictor_1) { p[0] = CI_PREDICTOR_1; p[1] = CILEN_PREDICTOR_1; p += CILEN_PREDICTOR_1; } if (go->predictor_2) { p[0] = CI_PREDICTOR_2; p[1] = CILEN_PREDICTOR_2; p += CILEN_PREDICTOR_2; } #endif /* PREDICTOR_SUPPORT */ go->method = (p > p0)? p0[0]: 0; *lenp = p - p0; } /* * ccp_ackci - process a received configure-ack, and return * 1 iff the packet was OK. */ static int ccp_ackci(fsm *f, u_char *p, int len) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; #if BSDCOMPRESS_SUPPORT || PREDICTOR_SUPPORT u_char *p0 = p; #endif /* BSDCOMPRESS_SUPPORT || PREDICTOR_SUPPORT */ #if MPPE_SUPPORT if (go->mppe) { u_char opt_buf[CILEN_MPPE]; opt_buf[0] = CI_MPPE; opt_buf[1] = CILEN_MPPE; MPPE_OPTS_TO_CI(go->mppe, &opt_buf[2]); if (len < CILEN_MPPE || memcmp(opt_buf, p, CILEN_MPPE)) return 0; p += CILEN_MPPE; len -= CILEN_MPPE; /* XXX Cope with first/fast ack */ if (len == 0) return 1; } #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT if (go->deflate) { if (len < CILEN_DEFLATE || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) || p[1] != CILEN_DEFLATE || p[2] != DEFLATE_MAKE_OPT(go->deflate_size) || p[3] != DEFLATE_CHK_SEQUENCE) return 0; p += CILEN_DEFLATE; len -= CILEN_DEFLATE; /* XXX Cope with first/fast ack */ if (len == 0) return 1; if (go->deflate_correct && go->deflate_draft) { if (len < CILEN_DEFLATE || p[0] != CI_DEFLATE_DRAFT || p[1] != CILEN_DEFLATE || p[2] != DEFLATE_MAKE_OPT(go->deflate_size) || p[3] != DEFLATE_CHK_SEQUENCE) return 0; p += CILEN_DEFLATE; len -= CILEN_DEFLATE; } } #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT if (go->bsd_compress) { if (len < CILEN_BSD_COMPRESS || p[0] != CI_BSD_COMPRESS || p[1] != CILEN_BSD_COMPRESS || p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits)) return 0; p += CILEN_BSD_COMPRESS; len -= CILEN_BSD_COMPRESS; /* XXX Cope with first/fast ack */ if (p == p0 && len == 0) return 1; } #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT if (go->predictor_1) { if (len < CILEN_PREDICTOR_1 || p[0] != CI_PREDICTOR_1 || p[1] != CILEN_PREDICTOR_1) return 0; p += CILEN_PREDICTOR_1; len -= CILEN_PREDICTOR_1; /* XXX Cope with first/fast ack */ if (p == p0 && len == 0) return 1; } if (go->predictor_2) { if (len < CILEN_PREDICTOR_2 || p[0] != CI_PREDICTOR_2 || p[1] != CILEN_PREDICTOR_2) return 0; p += CILEN_PREDICTOR_2; len -= CILEN_PREDICTOR_2; /* XXX Cope with first/fast ack */ if (p == p0 && len == 0) return 1; } #endif /* PREDICTOR_SUPPORT */ if (len != 0) return 0; return 1; } /* * ccp_nakci - process received configure-nak. * Returns 1 iff the nak was OK. */ static int ccp_nakci(fsm *f, u_char *p, int len, int treat_as_reject) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; ccp_options no; /* options we've seen already */ ccp_options try_; /* options to ask for next time */ LWIP_UNUSED_ARG(treat_as_reject); #if !MPPE_SUPPORT && !DEFLATE_SUPPORT && !BSDCOMPRESS_SUPPORT LWIP_UNUSED_ARG(p); LWIP_UNUSED_ARG(len); #endif /* !MPPE_SUPPORT && !DEFLATE_SUPPORT && !BSDCOMPRESS_SUPPORT */ memset(&no, 0, sizeof(no)); try_ = *go; #if MPPE_SUPPORT if (go->mppe && len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { no.mppe = 1; /* * Peer wants us to use a different strength or other setting. * Fail if we aren't willing to use his suggestion. */ MPPE_CI_TO_OPTS(&p[2], try_.mppe); if ((try_.mppe & MPPE_OPT_STATEFUL) && pcb->settings.refuse_mppe_stateful) { ppp_error("Refusing MPPE stateful mode offered by peer"); try_.mppe = 0; } else if (((go->mppe | MPPE_OPT_STATEFUL) & try_.mppe) != try_.mppe) { /* Peer must have set options we didn't request (suggest) */ try_.mppe = 0; } if (!try_.mppe) { ppp_error("MPPE required but peer negotiation failed"); lcp_close(pcb, "MPPE required but peer negotiation failed"); } } #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT if (go->deflate && len >= CILEN_DEFLATE && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT) && p[1] == CILEN_DEFLATE) { no.deflate = 1; /* * Peer wants us to use a different code size or something. * Stop asking for Deflate if we don't understand his suggestion. */ if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL || DEFLATE_SIZE(p[2]) < DEFLATE_MIN_WORKS || p[3] != DEFLATE_CHK_SEQUENCE) try_.deflate = 0; else if (DEFLATE_SIZE(p[2]) < go->deflate_size) try_.deflate_size = DEFLATE_SIZE(p[2]); p += CILEN_DEFLATE; len -= CILEN_DEFLATE; if (go->deflate_correct && go->deflate_draft && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT && p[1] == CILEN_DEFLATE) { p += CILEN_DEFLATE; len -= CILEN_DEFLATE; } } #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT if (go->bsd_compress && len >= CILEN_BSD_COMPRESS && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) { no.bsd_compress = 1; /* * Peer wants us to use a different number of bits * or a different version. */ if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION) try_.bsd_compress = 0; else if (BSD_NBITS(p[2]) < go->bsd_bits) try_.bsd_bits = BSD_NBITS(p[2]); p += CILEN_BSD_COMPRESS; len -= CILEN_BSD_COMPRESS; } #endif /* BSDCOMPRESS_SUPPORT */ /* * Predictor-1 and 2 have no options, so they can't be Naked. * * There may be remaining options but we ignore them. */ if (f->state != PPP_FSM_OPENED) *go = try_; return 1; } /* * ccp_rejci - reject some of our suggested compression methods. */ static int ccp_rejci(fsm *f, u_char *p, int len) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; ccp_options try_; /* options to request next time */ try_ = *go; /* * Cope with empty configure-rejects by ceasing to send * configure-requests. */ if (len == 0 && pcb->ccp_all_rejected) return -1; #if MPPE_SUPPORT if (go->mppe && len >= CILEN_MPPE && p[0] == CI_MPPE && p[1] == CILEN_MPPE) { ppp_error("MPPE required but peer refused"); lcp_close(pcb, "MPPE required but peer refused"); p += CILEN_MPPE; len -= CILEN_MPPE; } #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT if (go->deflate_correct && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE && p[1] == CILEN_DEFLATE) { if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size) || p[3] != DEFLATE_CHK_SEQUENCE) return 0; /* Rej is bad */ try_.deflate_correct = 0; p += CILEN_DEFLATE; len -= CILEN_DEFLATE; } if (go->deflate_draft && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT && p[1] == CILEN_DEFLATE) { if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size) || p[3] != DEFLATE_CHK_SEQUENCE) return 0; /* Rej is bad */ try_.deflate_draft = 0; p += CILEN_DEFLATE; len -= CILEN_DEFLATE; } if (!try_.deflate_correct && !try_.deflate_draft) try_.deflate = 0; #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT if (go->bsd_compress && len >= CILEN_BSD_COMPRESS && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) { if (p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits)) return 0; try_.bsd_compress = 0; p += CILEN_BSD_COMPRESS; len -= CILEN_BSD_COMPRESS; } #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT if (go->predictor_1 && len >= CILEN_PREDICTOR_1 && p[0] == CI_PREDICTOR_1 && p[1] == CILEN_PREDICTOR_1) { try_.predictor_1 = 0; p += CILEN_PREDICTOR_1; len -= CILEN_PREDICTOR_1; } if (go->predictor_2 && len >= CILEN_PREDICTOR_2 && p[0] == CI_PREDICTOR_2 && p[1] == CILEN_PREDICTOR_2) { try_.predictor_2 = 0; p += CILEN_PREDICTOR_2; len -= CILEN_PREDICTOR_2; } #endif /* PREDICTOR_SUPPORT */ if (len != 0) return 0; if (f->state != PPP_FSM_OPENED) *go = try_; return 1; } /* * ccp_reqci - processed a received configure-request. * Returns CONFACK, CONFNAK or CONFREJ and the packet modified * appropriately. */ static int ccp_reqci(fsm *f, u_char *p, int *lenp, int dont_nak) { ppp_pcb *pcb = f->pcb; ccp_options *ho = &pcb->ccp_hisoptions; ccp_options *ao = &pcb->ccp_allowoptions; int ret, newret; #if DEFLATE_SUPPORT || BSDCOMPRESS_SUPPORT int res; int nb; #endif /* DEFLATE_SUPPORT || BSDCOMPRESS_SUPPORT */ u_char *p0, *retp; int len, clen, type; #if MPPE_SUPPORT u8_t rej_for_ci_mppe = 1; /* Are we rejecting based on a bad/missing */ /* CI_MPPE, or due to other options? */ #endif /* MPPE_SUPPORT */ ret = CONFACK; retp = p0 = p; len = *lenp; memset(ho, 0, sizeof(ccp_options)); ho->method = (len > 0)? p[0]: 0; while (len > 0) { newret = CONFACK; if (len < 2 || p[1] < 2 || p[1] > len) { /* length is bad */ clen = len; newret = CONFREJ; } else { type = p[0]; clen = p[1]; switch (type) { #if MPPE_SUPPORT case CI_MPPE: if (!ao->mppe || clen != CILEN_MPPE) { newret = CONFREJ; break; } MPPE_CI_TO_OPTS(&p[2], ho->mppe); /* Nak if anything unsupported or unknown are set. */ if (ho->mppe & MPPE_OPT_UNSUPPORTED) { newret = CONFNAK; ho->mppe &= ~MPPE_OPT_UNSUPPORTED; } if (ho->mppe & MPPE_OPT_UNKNOWN) { newret = CONFNAK; ho->mppe &= ~MPPE_OPT_UNKNOWN; } /* Check state opt */ if (ho->mppe & MPPE_OPT_STATEFUL) { /* * We can Nak and request stateless, but it's a * lot easier to just assume the peer will request * it if he can do it; stateful mode is bad over * the Internet -- which is where we expect MPPE. */ if (pcb->settings.refuse_mppe_stateful) { ppp_error("Refusing MPPE stateful mode offered by peer"); newret = CONFREJ; break; } } /* Find out which of {S,L} are set. */ if ((ho->mppe & MPPE_OPT_128) && (ho->mppe & MPPE_OPT_40)) { /* Both are set, negotiate the strongest. */ newret = CONFNAK; if (ao->mppe & MPPE_OPT_128) ho->mppe &= ~MPPE_OPT_40; else if (ao->mppe & MPPE_OPT_40) ho->mppe &= ~MPPE_OPT_128; else { newret = CONFREJ; break; } } else if (ho->mppe & MPPE_OPT_128) { if (!(ao->mppe & MPPE_OPT_128)) { newret = CONFREJ; break; } } else if (ho->mppe & MPPE_OPT_40) { if (!(ao->mppe & MPPE_OPT_40)) { newret = CONFREJ; break; } } else { /* Neither are set. */ /* We cannot accept this. */ newret = CONFNAK; /* Give the peer our idea of what can be used, so it can choose and confirm */ ho->mppe = ao->mppe; } /* rebuild the opts */ MPPE_OPTS_TO_CI(ho->mppe, &p[2]); if (newret == CONFACK) { int mtu; mppe_init(pcb, &pcb->mppe_comp, ho->mppe); /* * We need to decrease the interface MTU by MPPE_PAD * because MPPE frames **grow**. The kernel [must] * allocate MPPE_PAD extra bytes in xmit buffers. */ mtu = netif_get_mtu(pcb); if (mtu) netif_set_mtu(pcb, mtu - MPPE_PAD); else newret = CONFREJ; } /* * We have accepted MPPE or are willing to negotiate * MPPE parameters. A CONFREJ is due to subsequent * (non-MPPE) processing. */ rej_for_ci_mppe = 0; break; #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT case CI_DEFLATE: case CI_DEFLATE_DRAFT: if (!ao->deflate || clen != CILEN_DEFLATE || (!ao->deflate_correct && type == CI_DEFLATE) || (!ao->deflate_draft && type == CI_DEFLATE_DRAFT)) { newret = CONFREJ; break; } ho->deflate = 1; ho->deflate_size = nb = DEFLATE_SIZE(p[2]); if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL || p[3] != DEFLATE_CHK_SEQUENCE || nb > ao->deflate_size || nb < DEFLATE_MIN_WORKS) { newret = CONFNAK; if (!dont_nak) { p[2] = DEFLATE_MAKE_OPT(ao->deflate_size); p[3] = DEFLATE_CHK_SEQUENCE; /* fall through to test this #bits below */ } else break; } /* * Check whether we can do Deflate with the window * size they want. If the window is too big, reduce * it until the kernel can cope and nak with that. * We only check this for the first option. */ if (p == p0) { for (;;) { res = ccp_test(pcb, p, CILEN_DEFLATE, 1); if (res > 0) break; /* it's OK now */ if (res < 0 || nb == DEFLATE_MIN_WORKS || dont_nak) { newret = CONFREJ; p[2] = DEFLATE_MAKE_OPT(ho->deflate_size); break; } newret = CONFNAK; --nb; p[2] = DEFLATE_MAKE_OPT(nb); } } break; #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT case CI_BSD_COMPRESS: if (!ao->bsd_compress || clen != CILEN_BSD_COMPRESS) { newret = CONFREJ; break; } ho->bsd_compress = 1; ho->bsd_bits = nb = BSD_NBITS(p[2]); if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION || nb > ao->bsd_bits || nb < BSD_MIN_BITS) { newret = CONFNAK; if (!dont_nak) { p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ao->bsd_bits); /* fall through to test this #bits below */ } else break; } /* * Check whether we can do BSD-Compress with the code * size they want. If the code size is too big, reduce * it until the kernel can cope and nak with that. * We only check this for the first option. */ if (p == p0) { for (;;) { res = ccp_test(pcb, p, CILEN_BSD_COMPRESS, 1); if (res > 0) break; if (res < 0 || nb == BSD_MIN_BITS || dont_nak) { newret = CONFREJ; p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ho->bsd_bits); break; } newret = CONFNAK; --nb; p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, nb); } } break; #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT case CI_PREDICTOR_1: if (!ao->predictor_1 || clen != CILEN_PREDICTOR_1) { newret = CONFREJ; break; } ho->predictor_1 = 1; if (p == p0 && ccp_test(pcb, p, CILEN_PREDICTOR_1, 1) <= 0) { newret = CONFREJ; } break; case CI_PREDICTOR_2: if (!ao->predictor_2 || clen != CILEN_PREDICTOR_2) { newret = CONFREJ; break; } ho->predictor_2 = 1; if (p == p0 && ccp_test(pcb, p, CILEN_PREDICTOR_2, 1) <= 0) { newret = CONFREJ; } break; #endif /* PREDICTOR_SUPPORT */ default: newret = CONFREJ; } } if (newret == CONFNAK && dont_nak) newret = CONFREJ; if (!(newret == CONFACK || (newret == CONFNAK && ret == CONFREJ))) { /* we're returning this option */ if (newret == CONFREJ && ret == CONFNAK) retp = p0; ret = newret; if (p != retp) MEMCPY(retp, p, clen); retp += clen; } p += clen; len -= clen; } if (ret != CONFACK) { if (ret == CONFREJ && *lenp == retp - p0) pcb->ccp_all_rejected = 1; else *lenp = retp - p0; } #if MPPE_SUPPORT if (ret == CONFREJ && ao->mppe && rej_for_ci_mppe) { ppp_error("MPPE required but peer negotiation failed"); lcp_close(pcb, "MPPE required but peer negotiation failed"); } #endif /* MPPE_SUPPORT */ return ret; } /* * Make a string name for a compression method (or 2). */ static const char *method_name(ccp_options *opt, ccp_options *opt2) { static char result[64]; #if !DEFLATE_SUPPORT && !BSDCOMPRESS_SUPPORT LWIP_UNUSED_ARG(opt2); #endif /* !DEFLATE_SUPPORT && !BSDCOMPRESS_SUPPORT */ if (!ccp_anycompress(opt)) return "(none)"; switch (opt->method) { #if MPPE_SUPPORT case CI_MPPE: { char *p = result; char *q = result + sizeof(result); /* 1 past result */ ppp_slprintf(p, q - p, "MPPE "); p += 5; if (opt->mppe & MPPE_OPT_128) { ppp_slprintf(p, q - p, "128-bit "); p += 8; } if (opt->mppe & MPPE_OPT_40) { ppp_slprintf(p, q - p, "40-bit "); p += 7; } if (opt->mppe & MPPE_OPT_STATEFUL) ppp_slprintf(p, q - p, "stateful"); else ppp_slprintf(p, q - p, "stateless"); break; } #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT case CI_DEFLATE: case CI_DEFLATE_DRAFT: if (opt2 != NULL && opt2->deflate_size != opt->deflate_size) ppp_slprintf(result, sizeof(result), "Deflate%s (%d/%d)", (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""), opt->deflate_size, opt2->deflate_size); else ppp_slprintf(result, sizeof(result), "Deflate%s (%d)", (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""), opt->deflate_size); break; #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT case CI_BSD_COMPRESS: if (opt2 != NULL && opt2->bsd_bits != opt->bsd_bits) ppp_slprintf(result, sizeof(result), "BSD-Compress (%d/%d)", opt->bsd_bits, opt2->bsd_bits); else ppp_slprintf(result, sizeof(result), "BSD-Compress (%d)", opt->bsd_bits); break; #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT case CI_PREDICTOR_1: return "Predictor 1"; case CI_PREDICTOR_2: return "Predictor 2"; #endif /* PREDICTOR_SUPPORT */ default: ppp_slprintf(result, sizeof(result), "Method %d", opt->method); } return result; } /* * CCP has come up - inform the kernel driver and log a message. */ static void ccp_up(fsm *f) { ppp_pcb *pcb = f->pcb; ccp_options *go = &pcb->ccp_gotoptions; ccp_options *ho = &pcb->ccp_hisoptions; char method1[64]; ccp_set(pcb, 1, 1, go->method, ho->method); if (ccp_anycompress(go)) { if (ccp_anycompress(ho)) { if (go->method == ho->method) { ppp_notice("%s compression enabled", method_name(go, ho)); } else { ppp_strlcpy(method1, method_name(go, NULL), sizeof(method1)); ppp_notice("%s / %s compression enabled", method1, method_name(ho, NULL)); } } else ppp_notice("%s receive compression enabled", method_name(go, NULL)); } else if (ccp_anycompress(ho)) ppp_notice("%s transmit compression enabled", method_name(ho, NULL)); #if MPPE_SUPPORT if (go->mppe) { continue_networks(pcb); /* Bring up IP et al */ } #endif /* MPPE_SUPPORT */ } /* * CCP has gone down - inform the kernel driver. */ static void ccp_down(fsm *f) { ppp_pcb *pcb = f->pcb; #if MPPE_SUPPORT ccp_options *go = &pcb->ccp_gotoptions; #endif /* MPPE_SUPPORT */ if (pcb->ccp_localstate & RACK_PENDING) UNTIMEOUT(ccp_rack_timeout, f); pcb->ccp_localstate = 0; ccp_set(pcb, 1, 0, 0, 0); #if MPPE_SUPPORT if (go->mppe) { go->mppe = 0; if (pcb->lcp_fsm.state == PPP_FSM_OPENED) { /* If LCP is not already going down, make sure it does. */ ppp_error("MPPE disabled"); lcp_close(pcb, "MPPE disabled"); } } #endif /* MPPE_SUPPORT */ } #if PRINTPKT_SUPPORT /* * Print the contents of a CCP packet. */ static const char* const ccp_codenames[] = { "ConfReq", "ConfAck", "ConfNak", "ConfRej", "TermReq", "TermAck", "CodeRej", NULL, NULL, NULL, NULL, NULL, NULL, "ResetReq", "ResetAck", }; static int ccp_printpkt(const u_char *p, int plen, void (*printer) (void *, const char *, ...), void *arg) { const u_char *p0, *optend; int code, id, len; int optlen; p0 = p; if (plen < HEADERLEN) return 0; code = p[0]; id = p[1]; len = (p[2] << 8) + p[3]; if (len < HEADERLEN || len > plen) return 0; if (code >= 1 && code <= (int)LWIP_ARRAYSIZE(ccp_codenames) && ccp_codenames[code-1] != NULL) printer(arg, " %s", ccp_codenames[code-1]); else printer(arg, " code=0x%x", code); printer(arg, " id=0x%x", id); len -= HEADERLEN; p += HEADERLEN; switch (code) { case CONFREQ: case CONFACK: case CONFNAK: case CONFREJ: /* print list of possible compression methods */ while (len >= 2) { code = p[0]; optlen = p[1]; if (optlen < 2 || optlen > len) break; printer(arg, " <"); len -= optlen; optend = p + optlen; switch (code) { #if MPPE_SUPPORT case CI_MPPE: if (optlen >= CILEN_MPPE) { u_char mppe_opts; MPPE_CI_TO_OPTS(&p[2], mppe_opts); printer(arg, "mppe %s %s %s %s %s %s%s", (p[2] & MPPE_H_BIT)? "+H": "-H", (p[5] & MPPE_M_BIT)? "+M": "-M", (p[5] & MPPE_S_BIT)? "+S": "-S", (p[5] & MPPE_L_BIT)? "+L": "-L", (p[5] & MPPE_D_BIT)? "+D": "-D", (p[5] & MPPE_C_BIT)? "+C": "-C", (mppe_opts & MPPE_OPT_UNKNOWN)? " +U": ""); if (mppe_opts & MPPE_OPT_UNKNOWN) printer(arg, " (%.2x %.2x %.2x %.2x)", p[2], p[3], p[4], p[5]); p += CILEN_MPPE; } break; #endif /* MPPE_SUPPORT */ #if DEFLATE_SUPPORT case CI_DEFLATE: case CI_DEFLATE_DRAFT: if (optlen >= CILEN_DEFLATE) { printer(arg, "deflate%s %d", (code == CI_DEFLATE_DRAFT? "(old#)": ""), DEFLATE_SIZE(p[2])); if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL) printer(arg, " method %d", DEFLATE_METHOD(p[2])); if (p[3] != DEFLATE_CHK_SEQUENCE) printer(arg, " check %d", p[3]); p += CILEN_DEFLATE; } break; #endif /* DEFLATE_SUPPORT */ #if BSDCOMPRESS_SUPPORT case CI_BSD_COMPRESS: if (optlen >= CILEN_BSD_COMPRESS) { printer(arg, "bsd v%d %d", BSD_VERSION(p[2]), BSD_NBITS(p[2])); p += CILEN_BSD_COMPRESS; } break; #endif /* BSDCOMPRESS_SUPPORT */ #if PREDICTOR_SUPPORT case CI_PREDICTOR_1: if (optlen >= CILEN_PREDICTOR_1) { printer(arg, "predictor 1"); p += CILEN_PREDICTOR_1; } break; case CI_PREDICTOR_2: if (optlen >= CILEN_PREDICTOR_2) { printer(arg, "predictor 2"); p += CILEN_PREDICTOR_2; } break; #endif /* PREDICTOR_SUPPORT */ default: break; } while (p < optend) printer(arg, " %.2x", *p++); printer(arg, ">"); } break; case TERMACK: case TERMREQ: if (len > 0 && *p >= ' ' && *p < 0x7f) { ppp_print_string(p, len, printer, arg); p += len; len = 0; } break; default: break; } /* dump out the rest of the packet in hex */ while (--len >= 0) printer(arg, " %.2x", *p++); return p - p0; } #endif /* PRINTPKT_SUPPORT */ #if PPP_DATAINPUT /* * We have received a packet that the decompressor failed to * decompress. Here we would expect to issue a reset-request, but * Motorola has a patent on resetting the compressor as a result of * detecting an error in the decompressed data after decompression. * (See US patent 5,130,993; international patent publication number * WO 91/10289; Australian patent 73296/91.) * * So we ask the kernel whether the error was detected after * decompression; if it was, we take CCP down, thus disabling * compression :-(, otherwise we issue the reset-request. */ static void ccp_datainput(ppp_pcb *pcb, u_char *pkt, int len) { fsm *f; #if MPPE_SUPPORT ccp_options *go = &pcb->ccp_gotoptions; #endif /* MPPE_SUPPORT */ LWIP_UNUSED_ARG(pkt); LWIP_UNUSED_ARG(len); f = &pcb->ccp_fsm; if (f->state == PPP_FSM_OPENED) { if (ccp_fatal_error(pcb)) { /* * Disable compression by taking CCP down. */ ppp_error("Lost compression sync: disabling compression"); ccp_close(pcb, "Lost compression sync"); #if MPPE_SUPPORT /* * If we were doing MPPE, we must also take the link down. */ if (go->mppe) { ppp_error("Too many MPPE errors, closing LCP"); lcp_close(pcb, "Too many MPPE errors"); } #endif /* MPPE_SUPPORT */ } else { /* * Send a reset-request to reset the peer's compressor. * We don't do that if we are still waiting for an * acknowledgement to a previous reset-request. */ if (!(pcb->ccp_localstate & RACK_PENDING)) { fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0); TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT); pcb->ccp_localstate |= RACK_PENDING; } else pcb->ccp_localstate |= RREQ_REPEAT; } } } #endif /* PPP_DATAINPUT */ /* * We have received a packet that the decompressor failed to * decompress. Issue a reset-request. */ void ccp_resetrequest(ppp_pcb *pcb) { fsm *f = &pcb->ccp_fsm; if (f->state != PPP_FSM_OPENED) return; /* * Send a reset-request to reset the peer's compressor. * We don't do that if we are still waiting for an * acknowledgement to a previous reset-request. */ if (!(pcb->ccp_localstate & RACK_PENDING)) { fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0); TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT); pcb->ccp_localstate |= RACK_PENDING; } else pcb->ccp_localstate |= RREQ_REPEAT; } /* * Timeout waiting for reset-ack. */ static void ccp_rack_timeout(void *arg) { fsm *f = (fsm*)arg; ppp_pcb *pcb = f->pcb; if (f->state == PPP_FSM_OPENED && (pcb->ccp_localstate & RREQ_REPEAT)) { fsm_sdata(f, CCP_RESETREQ, f->reqid, NULL, 0); TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT); pcb->ccp_localstate &= ~RREQ_REPEAT; } else pcb->ccp_localstate &= ~RACK_PENDING; } #endif /* PPP_SUPPORT && CCP_SUPPORT */