/** * @file * netconn API (to be used from non-TCPIP threads) */ /* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef LWIP_HDR_API_H #define LWIP_HDR_API_H #include "lwip/opt.h" #if LWIP_NETCONN || LWIP_SOCKET /* don't build if not configured for use in lwipopts.h */ /* Note: Netconn API is always available when sockets are enabled - * sockets are implemented on top of them */ #include "lwip/arch.h" #include "lwip/netbuf.h" #include "lwip/sys.h" #include "lwip/ip_addr.h" #include "lwip/err.h" #ifdef __cplusplus extern "C" { #endif /* Throughout this file, IP addresses and port numbers are expected to be in * the same byte order as in the corresponding pcb. */ /* Flags for netconn_write (u8_t) */ #define NETCONN_NOFLAG 0x00 #define NETCONN_NOCOPY 0x00 /* Only for source code compatibility */ #define NETCONN_COPY 0x01 #define NETCONN_MORE 0x02 #define NETCONN_DONTBLOCK 0x04 #define NETCONN_NOAUTORCVD 0x08 /* prevent netconn_recv_data_tcp() from updating the tcp window - must be done manually via netconn_tcp_recvd() */ #define NETCONN_NOFIN 0x10 /* upper layer already received data, leave FIN in queue until called again */ /* Flags for struct netconn.flags (u8_t) */ /** This netconn had an error, don't block on recvmbox/acceptmbox any more */ #define NETCONN_FLAG_MBOXCLOSED 0x01 /** Should this netconn avoid blocking? */ #define NETCONN_FLAG_NON_BLOCKING 0x02 /** Was the last connect action a non-blocking one? */ #define NETCONN_FLAG_IN_NONBLOCKING_CONNECT 0x04 #if LWIP_NETCONN_FULLDUPLEX /** The mbox of this netconn is being deallocated, don't use it anymore */ #define NETCONN_FLAG_MBOXINVALID 0x08 #endif /* LWIP_NETCONN_FULLDUPLEX */ /** If a nonblocking write has been rejected before, poll_tcp needs to check if the netconn is writable again */ #define NETCONN_FLAG_CHECK_WRITESPACE 0x10 #if LWIP_IPV6 /** If this flag is set then only IPv6 communication is allowed on the netconn. As per RFC#3493 this features defaults to OFF allowing dual-stack usage by default. */ #define NETCONN_FLAG_IPV6_V6ONLY 0x20 #endif /* LWIP_IPV6 */ #if LWIP_NETBUF_RECVINFO /** Received packet info will be recorded for this netconn */ #define NETCONN_FLAG_PKTINFO 0x40 #endif /* LWIP_NETBUF_RECVINFO */ /** A FIN has been received but not passed to the application yet */ #define NETCONN_FIN_RX_PENDING 0x80 /* Helpers to process several netconn_types by the same code */ #define NETCONNTYPE_GROUP(t) ((t)&0xF0) #define NETCONNTYPE_DATAGRAM(t) ((t)&0xE0) #if LWIP_IPV6 #define NETCONN_TYPE_IPV6 0x08 #define NETCONNTYPE_ISIPV6(t) (((t)&NETCONN_TYPE_IPV6) != 0) #define NETCONNTYPE_ISUDPLITE(t) (((t)&0xF3) == NETCONN_UDPLITE) #define NETCONNTYPE_ISUDPNOCHKSUM(t) (((t)&0xF3) == NETCONN_UDPNOCHKSUM) #else /* LWIP_IPV6 */ #define NETCONNTYPE_ISIPV6(t) (0) #define NETCONNTYPE_ISUDPLITE(t) ((t) == NETCONN_UDPLITE) #define NETCONNTYPE_ISUDPNOCHKSUM(t) ((t) == NETCONN_UDPNOCHKSUM) #endif /* LWIP_IPV6 */ /** @ingroup netconn_common * Protocol family and type of the netconn */ enum netconn_type { NETCONN_INVALID = 0, /** TCP IPv4 */ NETCONN_TCP = 0x10, #if LWIP_IPV6 /** TCP IPv6 */ NETCONN_TCP_IPV6 = NETCONN_TCP | NETCONN_TYPE_IPV6 /* 0x18 */, #endif /* LWIP_IPV6 */ /** UDP IPv4 */ NETCONN_UDP = 0x20, /** UDP IPv4 lite */ NETCONN_UDPLITE = 0x21, /** UDP IPv4 no checksum */ NETCONN_UDPNOCHKSUM = 0x22, #if LWIP_IPV6 /** UDP IPv6 (dual-stack by default, unless you call @ref netconn_set_ipv6only) */ NETCONN_UDP_IPV6 = NETCONN_UDP | NETCONN_TYPE_IPV6 /* 0x28 */, /** UDP IPv6 lite (dual-stack by default, unless you call @ref netconn_set_ipv6only) */ NETCONN_UDPLITE_IPV6 = NETCONN_UDPLITE | NETCONN_TYPE_IPV6 /* 0x29 */, /** UDP IPv6 no checksum (dual-stack by default, unless you call @ref netconn_set_ipv6only) */ NETCONN_UDPNOCHKSUM_IPV6 = NETCONN_UDPNOCHKSUM | NETCONN_TYPE_IPV6 /* 0x2a */, #endif /* LWIP_IPV6 */ /** Raw connection IPv4 */ NETCONN_RAW = 0x40 #if LWIP_IPV6 /** Raw connection IPv6 (dual-stack by default, unless you call @ref netconn_set_ipv6only) */ , NETCONN_RAW_IPV6 = NETCONN_RAW | NETCONN_TYPE_IPV6 /* 0x48 */ #endif /* LWIP_IPV6 */ }; /** Current state of the netconn. Non-TCP netconns are always * in state NETCONN_NONE! */ enum netconn_state { NETCONN_NONE, NETCONN_WRITE, NETCONN_LISTEN, NETCONN_CONNECT, NETCONN_CLOSE }; /** Used to inform the callback function about changes * * Event explanation: * * In the netconn implementation, there are three ways to block a client: * * - accept mbox (sys_arch_mbox_fetch(&conn->acceptmbox, &accept_ptr, 0); in netconn_accept()) * - receive mbox (sys_arch_mbox_fetch(&conn->recvmbox, &buf, 0); in netconn_recv_data()) * - send queue is full (sys_arch_sem_wait(LWIP_API_MSG_SEM(msg), 0); in lwip_netconn_do_write()) * * The events have to be seen as events signaling the state of these mboxes/semaphores. For non-blocking * connections, you need to know in advance whether a call to a netconn function call would block or not, * and these events tell you about that. * * RCVPLUS events say: Safe to perform a potentially blocking call call once more. * They are counted in sockets - three RCVPLUS events for accept mbox means you are safe * to call netconn_accept 3 times without being blocked. * Same thing for receive mbox. * * RCVMINUS events say: Your call to to a possibly blocking function is "acknowledged". * Socket implementation decrements the counter. * * For TX, there is no need to count, its merely a flag. SENDPLUS means you may send something. * SENDPLUS occurs when enough data was delivered to peer so netconn_send() can be called again. * A SENDMINUS event occurs when the next call to a netconn_send() would be blocking. */ enum netconn_evt { NETCONN_EVT_RCVPLUS, NETCONN_EVT_RCVMINUS, NETCONN_EVT_SENDPLUS, NETCONN_EVT_SENDMINUS, NETCONN_EVT_ERROR }; #if LWIP_IGMP || (LWIP_IPV6 && LWIP_IPV6_MLD) /** Used for netconn_join_leave_group() */ enum netconn_igmp { NETCONN_JOIN, NETCONN_LEAVE }; #endif /* LWIP_IGMP || (LWIP_IPV6 && LWIP_IPV6_MLD) */ #if LWIP_DNS /* Used for netconn_gethostbyname_addrtype(), these should match the DNS_ADDRTYPE defines in dns.h */ #define NETCONN_DNS_DEFAULT NETCONN_DNS_IPV4_IPV6 #define NETCONN_DNS_IPV4 0 #define NETCONN_DNS_IPV6 1 #define NETCONN_DNS_IPV4_IPV6 2 /* try to resolve IPv4 first, try IPv6 if IPv4 fails only */ #define NETCONN_DNS_IPV6_IPV4 3 /* try to resolve IPv6 first, try IPv4 if IPv6 fails only */ #endif /* LWIP_DNS */ /* forward-declare some structs to avoid to include their headers */ struct ip_pcb; struct tcp_pcb; struct udp_pcb; struct raw_pcb; struct netconn; struct api_msg; /** A callback prototype to inform about events for a netconn */ typedef void (* netconn_callback)(struct netconn *, enum netconn_evt, u16_t len); /** A netconn descriptor */ struct netconn { /** type of the netconn (TCP, UDP or RAW) */ enum netconn_type type; /** current state of the netconn */ enum netconn_state state; /** the lwIP internal protocol control block */ union { struct ip_pcb *ip; struct tcp_pcb *tcp; struct udp_pcb *udp; struct raw_pcb *raw; } pcb; /** the last asynchronous unreported error this netconn had */ err_t pending_err; #if !LWIP_NETCONN_SEM_PER_THREAD /** sem that is used to synchronously execute functions in the core context */ sys_sem_t op_completed; #endif /** mbox where received packets are stored until they are fetched by the netconn application thread (can grow quite big) */ sys_mbox_t recvmbox; #if LWIP_TCP /** mbox where new connections are stored until processed by the application thread */ sys_mbox_t acceptmbox; #endif /* LWIP_TCP */ #if LWIP_NETCONN_FULLDUPLEX /** number of threads waiting on an mbox. This is required to unblock all threads when closing while threads are waiting. */ int mbox_threads_waiting; #endif /** only used for socket layer */ #if LWIP_SOCKET int socket; #endif /* LWIP_SOCKET */ #if LWIP_SO_SNDTIMEO /** timeout to wait for sending data (which means enqueueing data for sending in internal buffers) in milliseconds */ s32_t send_timeout; #endif /* LWIP_SO_RCVTIMEO */ #if LWIP_SO_RCVTIMEO /** timeout in milliseconds to wait for new data to be received (or connections to arrive for listening netconns) */ u32_t recv_timeout; #endif /* LWIP_SO_RCVTIMEO */ #if LWIP_SO_RCVBUF /** maximum amount of bytes queued in recvmbox not used for TCP: adjust TCP_WND instead! */ int recv_bufsize; /** number of bytes currently in recvmbox to be received, tested against recv_bufsize to limit bytes on recvmbox for UDP and RAW, used for FIONREAD */ int recv_avail; #endif /* LWIP_SO_RCVBUF */ #if LWIP_SO_LINGER /** values <0 mean linger is disabled, values > 0 are seconds to linger */ s16_t linger; #endif /* LWIP_SO_LINGER */ /** flags holding more netconn-internal state, see NETCONN_FLAG_* defines */ u8_t flags; #if LWIP_TCP /** TCP: when data passed to netconn_write doesn't fit into the send buffer, this temporarily stores the message. Also used during connect and close. */ struct api_msg *current_msg; #endif /* LWIP_TCP */ /** A callback function that is informed about events for this netconn */ netconn_callback callback; }; /** This vector type is passed to @ref netconn_write_vectors_partly to send * multiple buffers at once. * ATTENTION: This type has to directly map struct iovec since one is casted * into the other! */ struct netvector { /** pointer to the application buffer that contains the data to send */ const void *ptr; /** size of the application data to send */ size_t len; }; /** Register an Network connection event */ #define API_EVENT(c,e,l) if (c->callback) { \ (*c->callback)(c, e, l); \ } /* Network connection functions: */ /** @ingroup netconn_common * Create new netconn connection * @param t @ref netconn_type */ #define netconn_new(t) netconn_new_with_proto_and_callback(t, 0, NULL) #define netconn_new_with_callback(t, c) netconn_new_with_proto_and_callback(t, 0, c) struct netconn *netconn_new_with_proto_and_callback(enum netconn_type t, u8_t proto, netconn_callback callback); err_t netconn_prepare_delete(struct netconn *conn); err_t netconn_delete(struct netconn *conn); /** Get the type of a netconn (as enum netconn_type). */ #define netconn_type(conn) (conn->type) err_t netconn_getaddr(struct netconn *conn, ip_addr_t *addr, u16_t *port, u8_t local); /** @ingroup netconn_common */ #define netconn_peer(c,i,p) netconn_getaddr(c,i,p,0) /** @ingroup netconn_common */ #define netconn_addr(c,i,p) netconn_getaddr(c,i,p,1) err_t netconn_bind(struct netconn *conn, const ip_addr_t *addr, u16_t port); err_t netconn_bind_if(struct netconn *conn, u8_t if_idx); err_t netconn_connect(struct netconn *conn, const ip_addr_t *addr, u16_t port); err_t netconn_disconnect (struct netconn *conn); err_t netconn_listen_with_backlog(struct netconn *conn, u8_t backlog); /** @ingroup netconn_tcp */ #define netconn_listen(conn) netconn_listen_with_backlog(conn, TCP_DEFAULT_LISTEN_BACKLOG) err_t netconn_accept(struct netconn *conn, struct netconn **new_conn); err_t netconn_recv(struct netconn *conn, struct netbuf **new_buf); err_t netconn_recv_udp_raw_netbuf(struct netconn *conn, struct netbuf **new_buf); err_t netconn_recv_udp_raw_netbuf_flags(struct netconn *conn, struct netbuf **new_buf, u8_t apiflags); err_t netconn_recv_tcp_pbuf(struct netconn *conn, struct pbuf **new_buf); err_t netconn_recv_tcp_pbuf_flags(struct netconn *conn, struct pbuf **new_buf, u8_t apiflags); err_t netconn_tcp_recvd(struct netconn *conn, size_t len); err_t netconn_sendto(struct netconn *conn, struct netbuf *buf, const ip_addr_t *addr, u16_t port); err_t netconn_send(struct netconn *conn, struct netbuf *buf); err_t netconn_write_partly(struct netconn *conn, const void *dataptr, size_t size, u8_t apiflags, size_t *bytes_written); err_t netconn_write_vectors_partly(struct netconn *conn, struct netvector *vectors, u16_t vectorcnt, u8_t apiflags, size_t *bytes_written); /** @ingroup netconn_tcp */ #define netconn_write(conn, dataptr, size, apiflags) \ netconn_write_partly(conn, dataptr, size, apiflags, NULL) err_t netconn_close(struct netconn *conn); err_t netconn_shutdown(struct netconn *conn, u8_t shut_rx, u8_t shut_tx); #if LWIP_IGMP || (LWIP_IPV6 && LWIP_IPV6_MLD) err_t netconn_join_leave_group(struct netconn *conn, const ip_addr_t *multiaddr, const ip_addr_t *netif_addr, enum netconn_igmp join_or_leave); err_t netconn_join_leave_group_netif(struct netconn *conn, const ip_addr_t *multiaddr, u8_t if_idx, enum netconn_igmp join_or_leave); #endif /* LWIP_IGMP || (LWIP_IPV6 && LWIP_IPV6_MLD) */ #if LWIP_DNS #if LWIP_IPV4 && LWIP_IPV6 err_t netconn_gethostbyname_addrtype(const char *name, ip_addr_t *addr, u8_t dns_addrtype); #define netconn_gethostbyname(name, addr) netconn_gethostbyname_addrtype(name, addr, NETCONN_DNS_DEFAULT) #else /* LWIP_IPV4 && LWIP_IPV6 */ err_t netconn_gethostbyname(const char *name, ip_addr_t *addr); #define netconn_gethostbyname_addrtype(name, addr, dns_addrtype) netconn_gethostbyname(name, addr) #endif /* LWIP_IPV4 && LWIP_IPV6 */ #endif /* LWIP_DNS */ err_t netconn_err(struct netconn *conn); #define netconn_recv_bufsize(conn) ((conn)->recv_bufsize) #define netconn_set_flags(conn, set_flags) do { (conn)->flags = (u8_t)((conn)->flags | (set_flags)); } while(0) #define netconn_clear_flags(conn, clr_flags) do { (conn)->flags = (u8_t)((conn)->flags & (u8_t)(~(clr_flags) & 0xff)); } while(0) #define netconn_is_flag_set(conn, flag) (((conn)->flags & (flag)) != 0) /** Set the blocking status of netconn calls (@todo: write/send is missing) */ #define netconn_set_nonblocking(conn, val) do { if(val) { \ netconn_set_flags(conn, NETCONN_FLAG_NON_BLOCKING); \ } else { \ netconn_clear_flags(conn, NETCONN_FLAG_NON_BLOCKING); }} while(0) /** Get the blocking status of netconn calls (@todo: write/send is missing) */ #define netconn_is_nonblocking(conn) (((conn)->flags & NETCONN_FLAG_NON_BLOCKING) != 0) #if LWIP_IPV6 /** @ingroup netconn_common * TCP: Set the IPv6 ONLY status of netconn calls (see NETCONN_FLAG_IPV6_V6ONLY) */ #define netconn_set_ipv6only(conn, val) do { if(val) { \ netconn_set_flags(conn, NETCONN_FLAG_IPV6_V6ONLY); \ } else { \ netconn_clear_flags(conn, NETCONN_FLAG_IPV6_V6ONLY); }} while(0) /** @ingroup netconn_common * TCP: Get the IPv6 ONLY status of netconn calls (see NETCONN_FLAG_IPV6_V6ONLY) */ #define netconn_get_ipv6only(conn) (((conn)->flags & NETCONN_FLAG_IPV6_V6ONLY) != 0) #endif /* LWIP_IPV6 */ #if LWIP_SO_SNDTIMEO /** Set the send timeout in milliseconds */ #define netconn_set_sendtimeout(conn, timeout) ((conn)->send_timeout = (timeout)) /** Get the send timeout in milliseconds */ #define netconn_get_sendtimeout(conn) ((conn)->send_timeout) #endif /* LWIP_SO_SNDTIMEO */ #if LWIP_SO_RCVTIMEO /** Set the receive timeout in milliseconds */ #define netconn_set_recvtimeout(conn, timeout) ((conn)->recv_timeout = (timeout)) /** Get the receive timeout in milliseconds */ #define netconn_get_recvtimeout(conn) ((conn)->recv_timeout) #endif /* LWIP_SO_RCVTIMEO */ #if LWIP_SO_RCVBUF /** Set the receive buffer in bytes */ #define netconn_set_recvbufsize(conn, recvbufsize) ((conn)->recv_bufsize = (recvbufsize)) /** Get the receive buffer in bytes */ #define netconn_get_recvbufsize(conn) ((conn)->recv_bufsize) #endif /* LWIP_SO_RCVBUF*/ #if LWIP_NETCONN_SEM_PER_THREAD void netconn_thread_init(void); void netconn_thread_cleanup(void); #else /* LWIP_NETCONN_SEM_PER_THREAD */ #define netconn_thread_init() #define netconn_thread_cleanup() #endif /* LWIP_NETCONN_SEM_PER_THREAD */ #ifdef __cplusplus } #endif #endif /* LWIP_NETCONN || LWIP_SOCKET */ #endif /* LWIP_HDR_API_H */