[457] | 1 | IANA-MAU-MIB DEFINITIONS ::= BEGIN
|
---|
| 2 |
|
---|
| 3 | IMPORTS
|
---|
| 4 | MODULE-IDENTITY, OBJECT-IDENTITY, mib-2
|
---|
| 5 | FROM SNMPv2-SMI
|
---|
| 6 | TEXTUAL-CONVENTION
|
---|
| 7 | FROM SNMPv2-TC
|
---|
| 8 | ;
|
---|
| 9 |
|
---|
| 10 | ianaMauMIB MODULE-IDENTITY
|
---|
| 11 | LAST-UPDATED "200704210000Z" -- April 21, 2007
|
---|
| 12 | ORGANIZATION "IANA"
|
---|
| 13 | CONTACT-INFO " Internet Assigned Numbers Authority
|
---|
| 14 |
|
---|
| 15 | Postal: ICANN
|
---|
| 16 | 4676 Admiralty Way, Suite 330
|
---|
| 17 | Marina del Rey, CA 90292
|
---|
| 18 |
|
---|
| 19 | Tel: +1-310-823-9358
|
---|
| 20 | EMail: iana&iana.org"
|
---|
| 21 |
|
---|
| 22 | DESCRIPTION
|
---|
| 23 | "This MIB module defines dot3MauType OBJECT-IDENTITIES and
|
---|
| 24 | IANAifMauListBits, IANAifMauMediaAvailable,
|
---|
| 25 | IANAifMauAutoNegCapBits, and IANAifJackType
|
---|
| 26 |
|
---|
| 27 | TEXTUAL-CONVENTIONs, specifying enumerated values of the
|
---|
| 28 | ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable,
|
---|
| 29 | ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits /
|
---|
| 30 | ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects
|
---|
| 31 | respectively, defined in the MAU-MIB.
|
---|
| 32 |
|
---|
| 33 | It is intended that each new MAU type, Media Availability
|
---|
| 34 | state, Auto Negotiation capability and/or Jack type defined by
|
---|
| 35 | the IEEE 802.3 working group and approved for publication in a
|
---|
| 36 | revision of IEEE Std 802.3 will be added to this MIB module,
|
---|
| 37 | provided that it is suitable for being managed by the base
|
---|
| 38 | objects in the MAU-MIB. An Expert Review, as defined in
|
---|
| 39 | RFC 2434 [RFC2434], is REQUIRED for such additions.
|
---|
| 40 |
|
---|
| 41 | The following reference is used throughout this MIB module:
|
---|
| 42 |
|
---|
| 43 | [IEEE802.3] refers to:
|
---|
| 44 | IEEE Std 802.3, 2005 Edition: 'IEEE Standard for
|
---|
| 45 | Information technology - Telecommunications and information
|
---|
| 46 | exchange between systems - Local and metropolitan area
|
---|
| 47 | networks - Specific requirements -
|
---|
| 48 | Part 3: Carrier sense multiple access with collision
|
---|
| 49 | detection (CSMA/CD) access method and physical layer
|
---|
| 50 | specifications'.
|
---|
| 51 |
|
---|
| 52 | This reference should be updated as appropriate when new
|
---|
| 53 | MAU types, Media Availability states, Auto Negotiation
|
---|
| 54 | capabilities, and/or Jack types are added to this MIB module.
|
---|
| 55 |
|
---|
| 56 | Copyright (C) The IETF Trust (2007).
|
---|
| 57 | The initial version of this MIB module was published in
|
---|
| 58 | RFC 4836; for full legal notices see the RFC itself.
|
---|
| 59 | Supplementary information may be available at:
|
---|
| 60 | http://www.ietf.org/copyrights/ianamib.html"
|
---|
| 61 |
|
---|
| 62 | REVISION "200704210000Z" -- April 21, 2007
|
---|
| 63 | DESCRIPTION "Initial version of this MIB as published in
|
---|
| 64 | RFC 4836."
|
---|
| 65 | ::= { mib-2 154 }
|
---|
| 66 |
|
---|
| 67 | -- Textual Conventions
|
---|
| 68 |
|
---|
| 69 | IANAifMauTypeListBits ::= TEXTUAL-CONVENTION
|
---|
| 70 | STATUS current
|
---|
| 71 | DESCRIPTION
|
---|
| 72 | "This data type is used as the syntax of the ifMauTypeListBits
|
---|
| 73 | object in the (updated) definition of MAU-MIB's ifMauTable.
|
---|
| 74 |
|
---|
| 75 | The most recent version of this textual convention is available
|
---|
| 76 | in the online version of this MIB module on the IANA web site.
|
---|
| 77 |
|
---|
| 78 | Requests for new values should be made to IANA via email
|
---|
| 79 | (iana&iana.org).
|
---|
| 80 |
|
---|
| 81 | Note that changes in this textual convention SHALL be
|
---|
| 82 | synchronized with relevant changes in the dot3MauType
|
---|
| 83 | OBJECT-IDENTITIES."
|
---|
| 84 | REFERENCE
|
---|
| 85 | "[IEEE802.3], Section 30.5.1.1.2"
|
---|
| 86 | SYNTAX BITS {
|
---|
| 87 | bOther(0), -- other or unknown
|
---|
| 88 | bAUI(1), -- AUI
|
---|
| 89 | b10base5(2), -- 10BASE-5
|
---|
| 90 | bFoirl(3), -- FOIRL
|
---|
| 91 |
|
---|
| 92 | b10base2(4), -- 10BASE-2
|
---|
| 93 | b10baseT(5), -- 10BASE-T duplex mode unknown
|
---|
| 94 | b10baseFP(6), -- 10BASE-FP
|
---|
| 95 | b10baseFB(7), -- 10BASE-FB
|
---|
| 96 | b10baseFL(8), -- 10BASE-FL duplex mode unknown
|
---|
| 97 | b10broad36(9), -- 10BROAD36
|
---|
| 98 | b10baseTHD(10), -- 10BASE-T half duplex mode
|
---|
| 99 | b10baseTFD(11), -- 10BASE-T full duplex mode
|
---|
| 100 | b10baseFLHD(12), -- 10BASE-FL half duplex mode
|
---|
| 101 | b10baseFLFD(13), -- 10BASE-FL full duplex mode
|
---|
| 102 | b100baseT4(14), -- 100BASE-T4
|
---|
| 103 | b100baseTXHD(15), -- 100BASE-TX half duplex mode
|
---|
| 104 | b100baseTXFD(16), -- 100BASE-TX full duplex mode
|
---|
| 105 | b100baseFXHD(17), -- 100BASE-FX half duplex mode
|
---|
| 106 | b100baseFXFD(18), -- 100BASE-FX full duplex mode
|
---|
| 107 | b100baseT2HD(19), -- 100BASE-T2 half duplex mode
|
---|
| 108 | b100baseT2FD(20), -- 100BASE-T2 full duplex mode
|
---|
| 109 |
|
---|
| 110 | b1000baseXHD(21), -- 1000BASE-X half duplex mode
|
---|
| 111 | b1000baseXFD(22), -- 1000BASE-X full duplex mode
|
---|
| 112 | b1000baseLXHD(23), -- 1000BASE-LX half duplex mode
|
---|
| 113 | b1000baseLXFD(24), -- 1000BASE-LX full duplex mode
|
---|
| 114 | b1000baseSXHD(25), -- 1000BASE-SX half duplex mode
|
---|
| 115 | b1000baseSXFD(26), -- 1000BASE-SX full duplex mode
|
---|
| 116 | b1000baseCXHD(27), -- 1000BASE-CX half duplex mode
|
---|
| 117 | b1000baseCXFD(28), -- 1000BASE-CX full duplex mode
|
---|
| 118 | b1000baseTHD(29), -- 1000BASE-T half duplex mode
|
---|
| 119 | b1000baseTFD(30), -- 1000BASE-T full duplex mode
|
---|
| 120 |
|
---|
| 121 | b10GbaseX(31), -- 10GBASE-X
|
---|
| 122 | b10GbaseLX4(32), -- 10GBASE-LX4
|
---|
| 123 |
|
---|
| 124 | b10GbaseR(33), -- 10GBASE-R
|
---|
| 125 | b10GbaseER(34), -- 10GBASE-ER
|
---|
| 126 | b10GbaseLR(35), -- 10GBASE-LR
|
---|
| 127 | b10GbaseSR(36), -- 10GBASE-SR
|
---|
| 128 | b10GbaseW(37), -- 10GBASE-W
|
---|
| 129 | b10GbaseEW(38), -- 10GBASE-EW
|
---|
| 130 | b10GbaseLW(39), -- 10GBASE-LW
|
---|
| 131 | b10GbaseSW(40), -- 10GBASE-SW
|
---|
| 132 | -- new since RFC 3636
|
---|
| 133 | b10GbaseCX4(41), -- 10GBASE-CX4
|
---|
| 134 | b2BaseTL(42), -- 2BASE-TL
|
---|
| 135 | b10PassTS(43), -- 10PASS-TS
|
---|
| 136 | b100BaseBX10D(44), -- 100BASE-BX10D
|
---|
| 137 | b100BaseBX10U(45), -- 100BASE-BX10U
|
---|
| 138 | b100BaseLX10(46), -- 100BASE-LX10
|
---|
| 139 | b1000BaseBX10D(47), -- 1000BASE-BX10D
|
---|
| 140 | b1000BaseBX10U(48), -- 1000BASE-BX10U
|
---|
| 141 | b1000BaseLX10(49), -- 1000BASE-LX10
|
---|
| 142 | b1000BasePX10D(50), -- 1000BASE-PX10D
|
---|
| 143 | b1000BasePX10U(51), -- 1000BASE-PX10U
|
---|
| 144 | b1000BasePX20D(52), -- 1000BASE-PX20D
|
---|
| 145 | b1000BasePX20U(53) -- 1000BASE-PX20U
|
---|
| 146 | }
|
---|
| 147 |
|
---|
| 148 | IANAifMauMediaAvailable ::= TEXTUAL-CONVENTION
|
---|
| 149 | STATUS current
|
---|
| 150 | DESCRIPTION
|
---|
| 151 | "This data type is used as the syntax of the
|
---|
| 152 | ifMauMediaAvailable and rpMauMediaAvailable objects in the
|
---|
| 153 | (updated) definition of MAU-MIB's ifMauTable and rpMauTable
|
---|
| 154 | respectively.
|
---|
| 155 |
|
---|
| 156 | Possible values are:
|
---|
| 157 | other(1) - undefined (not listed below)
|
---|
| 158 | unknown(2) - MAU's true state is unknown; e.g.,
|
---|
| 159 | during initialization
|
---|
| 160 | available(3) - link, light, or loopback is normal
|
---|
| 161 | notAvailable(4) - link loss, low light, or no loopback
|
---|
| 162 | remoteFault(5) - a fault has been detected at the
|
---|
| 163 | remote end of the link. This value
|
---|
| 164 | applies to 10BASE-FB, 100BASE-T4 Far
|
---|
| 165 | End Fault Indication and non-specified
|
---|
| 166 | remote faults from a system running
|
---|
| 167 | auto-negotiation
|
---|
| 168 | invalidSignal(6) - invalid signal has been received from
|
---|
| 169 | the other end of the link, 10BASE-FB
|
---|
| 170 | only
|
---|
| 171 | remoteJabber(7) - remote fault, due to jabber
|
---|
| 172 |
|
---|
| 173 | remoteLinkLoss(8) - remote fault, due to link loss
|
---|
| 174 | remoteTest(9) - remote fault, due to test
|
---|
| 175 | offline(10) - offline, Clause 37 Auto-Negotiation
|
---|
| 176 | only
|
---|
| 177 | autoNegError(11) - Auto-Negotiation Error, Clause 37
|
---|
| 178 | Auto-Negotiation only
|
---|
| 179 | pmdLinkFault(12) - PMA/PMD receive link fault. In case
|
---|
| 180 | of PAF (2BASE-TL / 10PASS-TS PHYs),
|
---|
| 181 | all PMEs in the aggregation group have
|
---|
| 182 | detected a link fault
|
---|
| 183 | wisFrameLoss(13) - WIS loss of frame, 10GBASE-W only
|
---|
| 184 | wisSignalLoss(14) - WIS loss of signal, 10GBASE-W only
|
---|
| 185 | pcsLinkFault(15) - PCS receive link fault
|
---|
| 186 | excessiveBER(16) - PCS Bit Error Ratio monitor
|
---|
| 187 | reporting excessive error ratio
|
---|
| 188 | dxsLinkFault(17) - DTE XGXS receive link fault, XAUI only
|
---|
| 189 | pxsLinkFault(18) - PHY XGXS receive link fault, XAUI only
|
---|
| 190 | availableReduced(19) - link normal, reduced bandwidth,
|
---|
| 191 | 2BASE-TL / 10PASS-TS only
|
---|
| 192 | ready(20) - at least one PME in the aggregation
|
---|
| 193 | group is detecting handshake tones,
|
---|
| 194 | 2BASE-TL / 10PASS-TS only
|
---|
| 195 |
|
---|
| 196 | If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T,
|
---|
| 197 | 10BASE-F), then this is equivalent to the link test fail
|
---|
| 198 | state/low light function. For an AUI, 10BASE2, 10BASE5, or
|
---|
| 199 | 10BROAD36 MAU, this indicates whether loopback is detected on
|
---|
| 200 | the DI circuit. The value of this attribute persists between
|
---|
| 201 | packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and
|
---|
| 202 | 10BASEFP.
|
---|
| 203 |
|
---|
| 204 | At power-up or following a reset, the Media Available state
|
---|
| 205 | will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and
|
---|
| 206 | 10BASE-FP MAUs. For these MAUs loopback will be tested on each
|
---|
| 207 | transmission during which no collision is detected.
|
---|
| 208 | If DI is receiving input when DO returns to IDL after a
|
---|
| 209 | transmission and there has been no collision during the
|
---|
| 210 | transmission, then loopback will be detected. The Media
|
---|
| 211 | Available state will only change during noncollided
|
---|
| 212 | transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and
|
---|
| 213 | 10BASE-FP MAUs.
|
---|
| 214 |
|
---|
| 215 | For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX,
|
---|
| 216 | 100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the
|
---|
| 217 | states within the link integrity state diagram.
|
---|
| 218 | Any MAU that implements management of [IEEE802.3] Clause
|
---|
| 219 | 28 Auto-Negotiation, will map remote fault indication to
|
---|
| 220 | remoteFault(5).
|
---|
| 221 |
|
---|
| 222 | Any MAU that implements management of Clause 37
|
---|
| 223 | Auto-Negotiation, will map the received RF1 and RF2 bits as
|
---|
| 224 | follows: Offline maps to offline(10), Link_Failure maps to
|
---|
| 225 | remoteFault(5), and Auto-Negotiation Error maps to
|
---|
| 226 | autoNegError(11).
|
---|
| 227 |
|
---|
| 228 | The value remoteFault(5) applies to 10BASE-FB remote
|
---|
| 229 | fault indication, the 100BASE-X far-end fault indication, and
|
---|
| 230 | nonspecified remote faults from a system running Clause 28
|
---|
| 231 | Auto-Negotiation.
|
---|
| 232 |
|
---|
| 233 | The value remoteJabber(7), remoteLink loss(8), or remoteTest(9)
|
---|
| 234 | SHOULD be used instead of remoteFault(5) where the reason for
|
---|
| 235 | remote fault is identified in the remote signaling protocol.
|
---|
| 236 | Where a Clause 22 MII or Clause 35 GMII is present, a logic
|
---|
| 237 | one in the remote fault bit maps to the value remoteFault(5),
|
---|
| 238 | a logic zero in the link status bit maps to the enumeration
|
---|
| 239 | notAvailable(4). The value notAvailable(4) takes precedence
|
---|
| 240 | over remoteFault(5).
|
---|
| 241 |
|
---|
| 242 | For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to
|
---|
| 243 | the condition where the PHY (PCS with connected PMEs) is
|
---|
| 244 | initializing, the value ready(20) maps to the condition where
|
---|
| 245 | the interface is down and at least one PME in the aggregation
|
---|
| 246 | group is ready for handshake, the value available(3) maps to
|
---|
| 247 | the condition where all the PMEs in the aggregation group are
|
---|
| 248 | up, the value notAvailable(4) maps to the condition where all
|
---|
| 249 | the PMEs in the aggregation group are down and no handshake
|
---|
| 250 | tones are detected, the value availableReduced(19) maps to the
|
---|
| 251 | condition where the interface is up, a link fault is detected
|
---|
| 252 | at the receive direction by one or more PMEs in the
|
---|
| 253 | aggregation group, but at least one PME is up and the
|
---|
| 254 | enumeration pmdLinkFault(12) maps to the condition where a link
|
---|
| 255 | fault is detected at the receive direction by all of the PMEs
|
---|
| 256 | in the aggregation group.
|
---|
| 257 |
|
---|
| 258 | For 10 Gb/s the enumerations map to value of the link_fault
|
---|
| 259 | variable within the Link Fault Signaling state diagram
|
---|
| 260 | as follows: the value OK maps to the value available(3),
|
---|
| 261 | the value Local Fault maps to the value notAvailable(4),
|
---|
| 262 | and the value Remote Fault maps to the value remoteFault(5).
|
---|
| 263 | The value pmdLinkFault(12), wisFrameLoss(13),
|
---|
| 264 | wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or
|
---|
| 265 | dxsLinkFault(17) SHOULD be used instead of the value
|
---|
| 266 | notAvailable(4), where the reason for the Local Fault state can
|
---|
| 267 | be identified through the use of the Clause 45 MDIO Interface.
|
---|
| 268 | Where multiple reasons for the Local Fault state can be
|
---|
| 269 | identified, only the highest precedence error SHOULD be
|
---|
| 270 |
|
---|
| 271 | reported. This precedence in descending order is as follows:
|
---|
| 272 |
|
---|
| 273 | pxsLinkFault
|
---|
| 274 | pmdLinkFault
|
---|
| 275 | wisFrameLoss
|
---|
| 276 | wisSignalLoss
|
---|
| 277 | pcsLinkFault
|
---|
| 278 | excessiveBER
|
---|
| 279 | dxsLinkFault.
|
---|
| 280 |
|
---|
| 281 | Where a Clause 45 MDIO interface is present a logic zero in
|
---|
| 282 | the PMA/PMD Receive link status bit ([IEEE802.3]
|
---|
| 283 | Section 45.2.1.2.2) maps to the value pmdLinkFault(12),
|
---|
| 284 | logic one in the LOF status bit (Section 45.2.2.10.4) maps
|
---|
| 285 | to the value wisFrameLoss(13), a logic one in the LOS
|
---|
| 286 | status bit (Section 45.2.2.10.5) maps to the value
|
---|
| 287 | wisSignalLoss, a logic zero in the PCS Receive
|
---|
| 288 | link status bit (Section 45.2.3.2.2) maps to the value
|
---|
| 289 | pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched
|
---|
| 290 | high BER status bit (Section 45.2.3.12.2) maps to the value
|
---|
| 291 | excessiveBER, a logic zero in the DTE XS receive link status
|
---|
| 292 | bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17)
|
---|
| 293 | and a logic zero in the PHY XS transmit link status bit
|
---|
| 294 | (Section 45.2.4.2.2) maps to the value pxsLinkFault(18).
|
---|
| 295 |
|
---|
| 296 | The most recent version of this textual convention is available
|
---|
| 297 | in the online version of this MIB module on the IANA web site.
|
---|
| 298 |
|
---|
| 299 | Requests for new values should be made to IANA via email
|
---|
| 300 | (iana&iana.org)."
|
---|
| 301 | REFERENCE
|
---|
| 302 | "[IEEE802.3], Section 30.5.1.1.4"
|
---|
| 303 | SYNTAX INTEGER {
|
---|
| 304 | other(1),
|
---|
| 305 | unknown(2),
|
---|
| 306 | available(3),
|
---|
| 307 | notAvailable(4),
|
---|
| 308 | remoteFault(5),
|
---|
| 309 | invalidSignal(6),
|
---|
| 310 | remoteJabber(7),
|
---|
| 311 | remoteLinkLoss(8),
|
---|
| 312 | remoteTest(9),
|
---|
| 313 | offline(10),
|
---|
| 314 | autoNegError(11),
|
---|
| 315 | pmdLinkFault(12),
|
---|
| 316 | wisFrameLoss(13),
|
---|
| 317 | wisSignalLoss(14),
|
---|
| 318 | pcsLinkFault(15),
|
---|
| 319 |
|
---|
| 320 | excessiveBER(16),
|
---|
| 321 | dxsLinkFault(17),
|
---|
| 322 | pxsLinkFault(18),
|
---|
| 323 | availableReduced(19),
|
---|
| 324 | ready(20)
|
---|
| 325 | }
|
---|
| 326 |
|
---|
| 327 | IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION
|
---|
| 328 | STATUS current
|
---|
| 329 | DESCRIPTION
|
---|
| 330 | "This data type is used as the syntax of the
|
---|
| 331 | ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and
|
---|
| 332 | ifMauAutoNegCapReceivedBits objects in the (updated) definition
|
---|
| 333 | of MAU-MIB's ifMauAutoNegTable.
|
---|
| 334 |
|
---|
| 335 | The most recent version of this textual convention is available
|
---|
| 336 | in the online version of this MIB module on the IANA web site.
|
---|
| 337 |
|
---|
| 338 | Requests for new values should be made to IANA via email
|
---|
| 339 | (iana&iana.org)."
|
---|
| 340 | REFERENCE
|
---|
| 341 | "[IEEE802.3], Section 30.6.1.1.5"
|
---|
| 342 | SYNTAX BITS {
|
---|
| 343 | bOther(0), -- other or unknown
|
---|
| 344 | b10baseT(1), -- 10BASE-T half duplex mode
|
---|
| 345 | b10baseTFD(2), -- 10BASE-T full duplex mode
|
---|
| 346 | b100baseT4(3), -- 100BASE-T4
|
---|
| 347 | b100baseTX(4), -- 100BASE-TX half duplex mode
|
---|
| 348 | b100baseTXFD(5), -- 100BASE-TX full duplex mode
|
---|
| 349 | b100baseT2(6), -- 100BASE-T2 half duplex mode
|
---|
| 350 | b100baseT2FD(7), -- 100BASE-T2 full duplex mode
|
---|
| 351 | bFdxPause(8), -- PAUSE for full-duplex links
|
---|
| 352 | bFdxAPause(9), -- Asymmetric PAUSE for full-duplex
|
---|
| 353 | -- links
|
---|
| 354 | bFdxSPause(10), -- Symmetric PAUSE for full-duplex
|
---|
| 355 | -- links
|
---|
| 356 | bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for
|
---|
| 357 | -- full-duplex links
|
---|
| 358 | b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half
|
---|
| 359 | -- duplex mode
|
---|
| 360 | b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full
|
---|
| 361 | -- duplex mode
|
---|
| 362 | b1000baseT(14), -- 1000BASE-T half duplex mode
|
---|
| 363 | b1000baseTFD(15) -- 1000BASE-T full duplex mode
|
---|
| 364 | }
|
---|
| 365 |
|
---|
| 366 | IANAifJackType ::= TEXTUAL-CONVENTION
|
---|
| 367 | STATUS current
|
---|
| 368 |
|
---|
| 369 | DESCRIPTION
|
---|
| 370 | "Common enumeration values for repeater and interface MAU
|
---|
| 371 | jack types. This data type is used as the syntax of the
|
---|
| 372 | ifJackType and rpJackType objects in the (updated) definition
|
---|
| 373 | of MAU-MIB's ifJackTable and rpJackTable respectively.
|
---|
| 374 |
|
---|
| 375 | Possible values are:
|
---|
| 376 | other(1) - undefined or unknown
|
---|
| 377 | rj45(2) - RJ45
|
---|
| 378 | rj45S(3) - RJ45 shielded
|
---|
| 379 | db9(4) - DB9
|
---|
| 380 | bnc(5) - BNC
|
---|
| 381 | fAUI(6) - AUI female
|
---|
| 382 | mAUI(7) - AUI male
|
---|
| 383 | fiberSC(8) - SC fiber
|
---|
| 384 | fiberMIC(9) - MIC fiber
|
---|
| 385 | fiberST(10) - ST fiber
|
---|
| 386 | telco(11) - Telco
|
---|
| 387 | mtrj(12) - MT-RJ fiber
|
---|
| 388 | hssdc(13) - fiber channel style-2
|
---|
| 389 | fiberLC(14) - LC fiber
|
---|
| 390 | cx4(15) - IB4X for 10GBASE-CX4
|
---|
| 391 |
|
---|
| 392 | The most recent version of this textual convention is available
|
---|
| 393 | in the online version of this MIB module on the IANA web site.
|
---|
| 394 |
|
---|
| 395 | Requests for new values should be made to IANA via email
|
---|
| 396 | (iana&iana.org)."
|
---|
| 397 | SYNTAX INTEGER {
|
---|
| 398 | other(1),
|
---|
| 399 | rj45(2),
|
---|
| 400 | rj45S(3),
|
---|
| 401 | db9(4),
|
---|
| 402 | bnc(5),
|
---|
| 403 | fAUI(6),
|
---|
| 404 | mAUI(7),
|
---|
| 405 | fiberSC(8),
|
---|
| 406 | fiberMIC(9),
|
---|
| 407 | fiberST(10),
|
---|
| 408 | telco(11),
|
---|
| 409 | mtrj(12),
|
---|
| 410 | hssdc(13),
|
---|
| 411 | fiberLC(14),
|
---|
| 412 | -- new since RFC 3636
|
---|
| 413 | cx4(15)
|
---|
| 414 | }
|
---|
| 415 |
|
---|
| 416 | -- OBJECT IDENTITIES for MAU types
|
---|
| 417 |
|
---|
| 418 | -- (see rpMauType and ifMauType of MAU-MIB for usage)
|
---|
| 419 | -- The following definitions has been moved from RFC 3636 and
|
---|
| 420 | -- no longer appear in its revision.
|
---|
| 421 |
|
---|
| 422 | dot3MauType OBJECT IDENTIFIER ::= { mib-2 snmpDot3MauMgt(26) 4 }
|
---|
| 423 |
|
---|
| 424 | dot3MauTypeAUI OBJECT-IDENTITY
|
---|
| 425 | STATUS current
|
---|
| 426 | DESCRIPTION "no internal MAU, view from AUI"
|
---|
| 427 | REFERENCE "[IEEE802.3], Section 7"
|
---|
| 428 | ::= { dot3MauType 1 }
|
---|
| 429 |
|
---|
| 430 | dot3MauType10Base5 OBJECT-IDENTITY
|
---|
| 431 | STATUS current
|
---|
| 432 | DESCRIPTION "thick coax MAU"
|
---|
| 433 | REFERENCE "[IEEE802.3], Section 7"
|
---|
| 434 | ::= { dot3MauType 2 }
|
---|
| 435 |
|
---|
| 436 | dot3MauTypeFoirl OBJECT-IDENTITY
|
---|
| 437 | STATUS current
|
---|
| 438 | DESCRIPTION "FOIRL MAU"
|
---|
| 439 | REFERENCE "[IEEE802.3], Section 9.9"
|
---|
| 440 | ::= { dot3MauType 3 }
|
---|
| 441 |
|
---|
| 442 | dot3MauType10Base2 OBJECT-IDENTITY
|
---|
| 443 | STATUS current
|
---|
| 444 | DESCRIPTION "thin coax MAU"
|
---|
| 445 | REFERENCE "[IEEE802.3], Section 10"
|
---|
| 446 | ::= { dot3MauType 4 }
|
---|
| 447 |
|
---|
| 448 | dot3MauType10BaseT OBJECT-IDENTITY
|
---|
| 449 | STATUS current
|
---|
| 450 | DESCRIPTION "UTP MAU.
|
---|
| 451 | Note that it is strongly recommended that
|
---|
| 452 | agents return either dot3MauType10BaseTHD or
|
---|
| 453 | dot3MauType10BaseTFD if the duplex mode is
|
---|
| 454 | known. However, management applications should
|
---|
| 455 | be prepared to receive this MAU type value from
|
---|
| 456 | older agent implementations."
|
---|
| 457 | REFERENCE "[IEEE802.3], Section 14"
|
---|
| 458 | ::= { dot3MauType 5 }
|
---|
| 459 |
|
---|
| 460 | dot3MauType10BaseFP OBJECT-IDENTITY
|
---|
| 461 | STATUS current
|
---|
| 462 | DESCRIPTION "passive fiber MAU"
|
---|
| 463 | REFERENCE "[IEEE802.3], Section 16"
|
---|
| 464 | ::= { dot3MauType 6 }
|
---|
| 465 |
|
---|
| 466 | dot3MauType10BaseFB OBJECT-IDENTITY
|
---|
| 467 | STATUS current
|
---|
| 468 | DESCRIPTION "sync fiber MAU"
|
---|
| 469 | REFERENCE "[IEEE802.3], Section 17"
|
---|
| 470 | ::= { dot3MauType 7 }
|
---|
| 471 |
|
---|
| 472 | dot3MauType10BaseFL OBJECT-IDENTITY
|
---|
| 473 | STATUS current
|
---|
| 474 | DESCRIPTION "async fiber MAU.
|
---|
| 475 | Note that it is strongly recommended that
|
---|
| 476 | agents return either dot3MauType10BaseFLHD or
|
---|
| 477 | dot3MauType10BaseFLFD if the duplex mode is
|
---|
| 478 | known. However, management applications should
|
---|
| 479 | be prepared to receive this MAU type value from
|
---|
| 480 | older agent implementations."
|
---|
| 481 | REFERENCE "[IEEE802.3], Section 18"
|
---|
| 482 | ::= { dot3MauType 8 }
|
---|
| 483 |
|
---|
| 484 | dot3MauType10Broad36 OBJECT-IDENTITY
|
---|
| 485 | STATUS current
|
---|
| 486 | DESCRIPTION "broadband DTE MAU.
|
---|
| 487 | Note that 10BROAD36 MAUs can be attached to
|
---|
| 488 | interfaces but not to repeaters."
|
---|
| 489 | REFERENCE "[IEEE802.3], Section 11"
|
---|
| 490 | ::= { dot3MauType 9 }
|
---|
| 491 |
|
---|
| 492 | ------ new since RFC 1515:
|
---|
| 493 | dot3MauType10BaseTHD OBJECT-IDENTITY
|
---|
| 494 | STATUS current
|
---|
| 495 | DESCRIPTION "UTP MAU, half duplex mode"
|
---|
| 496 | REFERENCE "[IEEE802.3], Section 14"
|
---|
| 497 | ::= { dot3MauType 10 }
|
---|
| 498 |
|
---|
| 499 | dot3MauType10BaseTFD OBJECT-IDENTITY
|
---|
| 500 | STATUS current
|
---|
| 501 | DESCRIPTION "UTP MAU, full duplex mode"
|
---|
| 502 | REFERENCE "[IEEE802.3], Section 14"
|
---|
| 503 | ::= { dot3MauType 11 }
|
---|
| 504 |
|
---|
| 505 | dot3MauType10BaseFLHD OBJECT-IDENTITY
|
---|
| 506 | STATUS current
|
---|
| 507 | DESCRIPTION "async fiber MAU, half duplex mode"
|
---|
| 508 | REFERENCE "[IEEE802.3], Section 18"
|
---|
| 509 | ::= { dot3MauType 12 }
|
---|
| 510 |
|
---|
| 511 | dot3MauType10BaseFLFD OBJECT-IDENTITY
|
---|
| 512 | STATUS current
|
---|
| 513 | DESCRIPTION "async fiber MAU, full duplex mode"
|
---|
| 514 |
|
---|
| 515 | REFERENCE "[IEEE802.3], Section 18"
|
---|
| 516 | ::= { dot3MauType 13 }
|
---|
| 517 |
|
---|
| 518 | dot3MauType100BaseT4 OBJECT-IDENTITY
|
---|
| 519 | STATUS current
|
---|
| 520 | DESCRIPTION "4 pair category 3 UTP"
|
---|
| 521 | REFERENCE "[IEEE802.3], Section 23"
|
---|
| 522 | ::= { dot3MauType 14 }
|
---|
| 523 |
|
---|
| 524 | dot3MauType100BaseTXHD OBJECT-IDENTITY
|
---|
| 525 | STATUS current
|
---|
| 526 | DESCRIPTION "2 pair category 5 UTP, half duplex mode"
|
---|
| 527 | REFERENCE "[IEEE802.3], Section 25"
|
---|
| 528 | ::= { dot3MauType 15 }
|
---|
| 529 |
|
---|
| 530 | dot3MauType100BaseTXFD OBJECT-IDENTITY
|
---|
| 531 | STATUS current
|
---|
| 532 | DESCRIPTION "2 pair category 5 UTP, full duplex mode"
|
---|
| 533 | REFERENCE "[IEEE802.3], Section 25"
|
---|
| 534 | ::= { dot3MauType 16 }
|
---|
| 535 |
|
---|
| 536 | dot3MauType100BaseFXHD OBJECT-IDENTITY
|
---|
| 537 | STATUS current
|
---|
| 538 | DESCRIPTION "X fiber over PMT, half duplex mode"
|
---|
| 539 | REFERENCE "[IEEE802.3], Section 26"
|
---|
| 540 | ::= { dot3MauType 17 }
|
---|
| 541 |
|
---|
| 542 | dot3MauType100BaseFXFD OBJECT-IDENTITY
|
---|
| 543 | STATUS current
|
---|
| 544 | DESCRIPTION "X fiber over PMT, full duplex mode"
|
---|
| 545 | REFERENCE "[IEEE802.3], Section 26"
|
---|
| 546 | ::= { dot3MauType 18 }
|
---|
| 547 |
|
---|
| 548 | dot3MauType100BaseT2HD OBJECT-IDENTITY
|
---|
| 549 | STATUS current
|
---|
| 550 | DESCRIPTION "2 pair category 3 UTP, half duplex mode"
|
---|
| 551 | REFERENCE "[IEEE802.3], Section 32"
|
---|
| 552 | ::= { dot3MauType 19 }
|
---|
| 553 |
|
---|
| 554 | dot3MauType100BaseT2FD OBJECT-IDENTITY
|
---|
| 555 | STATUS current
|
---|
| 556 | DESCRIPTION "2 pair category 3 UTP, full duplex mode"
|
---|
| 557 | REFERENCE "[IEEE802.3], Section 32"
|
---|
| 558 | ::= { dot3MauType 20 }
|
---|
| 559 |
|
---|
| 560 | ------ new since RFC 2239:
|
---|
| 561 | dot3MauType1000BaseXHD OBJECT-IDENTITY
|
---|
| 562 | STATUS current
|
---|
| 563 |
|
---|
| 564 | DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode"
|
---|
| 565 | REFERENCE "[IEEE802.3], Section 36"
|
---|
| 566 | ::= { dot3MauType 21 }
|
---|
| 567 |
|
---|
| 568 | dot3MauType1000BaseXFD OBJECT-IDENTITY
|
---|
| 569 | STATUS current
|
---|
| 570 | DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode"
|
---|
| 571 | REFERENCE "[IEEE802.3], Section 36"
|
---|
| 572 | ::= { dot3MauType 22 }
|
---|
| 573 |
|
---|
| 574 | dot3MauType1000BaseLXHD OBJECT-IDENTITY
|
---|
| 575 | STATUS current
|
---|
| 576 | DESCRIPTION "Fiber over long-wavelength laser, half duplex
|
---|
| 577 | mode"
|
---|
| 578 | REFERENCE "[IEEE802.3], Section 38"
|
---|
| 579 | ::= { dot3MauType 23 }
|
---|
| 580 |
|
---|
| 581 | dot3MauType1000BaseLXFD OBJECT-IDENTITY
|
---|
| 582 | STATUS current
|
---|
| 583 | DESCRIPTION "Fiber over long-wavelength laser, full duplex
|
---|
| 584 | mode"
|
---|
| 585 | REFERENCE "[IEEE802.3], Section 38"
|
---|
| 586 | ::= { dot3MauType 24 }
|
---|
| 587 |
|
---|
| 588 | dot3MauType1000BaseSXHD OBJECT-IDENTITY
|
---|
| 589 | STATUS current
|
---|
| 590 | DESCRIPTION "Fiber over short-wavelength laser, half
|
---|
| 591 | duplex mode"
|
---|
| 592 | REFERENCE "[IEEE802.3], Section 38"
|
---|
| 593 | ::= { dot3MauType 25 }
|
---|
| 594 |
|
---|
| 595 | dot3MauType1000BaseSXFD OBJECT-IDENTITY
|
---|
| 596 | STATUS current
|
---|
| 597 | DESCRIPTION "Fiber over short-wavelength laser, full
|
---|
| 598 | duplex mode"
|
---|
| 599 | REFERENCE "[IEEE802.3], Section 38"
|
---|
| 600 | ::= { dot3MauType 26 }
|
---|
| 601 |
|
---|
| 602 | dot3MauType1000BaseCXHD OBJECT-IDENTITY
|
---|
| 603 | STATUS current
|
---|
| 604 | DESCRIPTION "Copper over 150-Ohm balanced cable, half
|
---|
| 605 | duplex mode"
|
---|
| 606 | REFERENCE "[IEEE802.3], Section 39"
|
---|
| 607 | ::= { dot3MauType 27 }
|
---|
| 608 |
|
---|
| 609 | dot3MauType1000BaseCXFD OBJECT-IDENTITY
|
---|
| 610 | STATUS current
|
---|
| 611 | DESCRIPTION "Copper over 150-Ohm balanced cable, full
|
---|
| 612 |
|
---|
| 613 | duplex mode"
|
---|
| 614 | REFERENCE "[IEEE802.3], Section 39"
|
---|
| 615 | ::= { dot3MauType 28 }
|
---|
| 616 |
|
---|
| 617 | dot3MauType1000BaseTHD OBJECT-IDENTITY
|
---|
| 618 | STATUS current
|
---|
| 619 | DESCRIPTION "Four-pair Category 5 UTP, half duplex mode"
|
---|
| 620 | REFERENCE "[IEEE802.3], Section 40"
|
---|
| 621 | ::= { dot3MauType 29 }
|
---|
| 622 |
|
---|
| 623 | dot3MauType1000BaseTFD OBJECT-IDENTITY
|
---|
| 624 | STATUS current
|
---|
| 625 | DESCRIPTION "Four-pair Category 5 UTP, full duplex mode"
|
---|
| 626 | REFERENCE "[IEEE802.3], Section 40"
|
---|
| 627 | ::= { dot3MauType 30 }
|
---|
| 628 |
|
---|
| 629 | ------ new since RFC 2668:
|
---|
| 630 | dot3MauType10GigBaseX OBJECT-IDENTITY
|
---|
| 631 | STATUS current
|
---|
| 632 | DESCRIPTION "X PCS/PMA, unknown PMD."
|
---|
| 633 | REFERENCE "[IEEE802.3], Section 48"
|
---|
| 634 | ::= { dot3MauType 31 }
|
---|
| 635 |
|
---|
| 636 | dot3MauType10GigBaseLX4 OBJECT-IDENTITY
|
---|
| 637 | STATUS current
|
---|
| 638 | DESCRIPTION "X fiber over WWDM optics"
|
---|
| 639 | REFERENCE "[IEEE802.3], Section 53"
|
---|
| 640 | ::= { dot3MauType 32 }
|
---|
| 641 |
|
---|
| 642 | dot3MauType10GigBaseR OBJECT-IDENTITY
|
---|
| 643 | STATUS current
|
---|
| 644 | DESCRIPTION "R PCS/PMA, unknown PMD."
|
---|
| 645 | REFERENCE "[IEEE802.3], Section 49"
|
---|
| 646 | ::= { dot3MauType 33 }
|
---|
| 647 |
|
---|
| 648 | dot3MauType10GigBaseER OBJECT-IDENTITY
|
---|
| 649 | STATUS current
|
---|
| 650 | DESCRIPTION "R fiber over 1550 nm optics"
|
---|
| 651 | REFERENCE "[IEEE802.3], Section 52"
|
---|
| 652 | ::= { dot3MauType 34 }
|
---|
| 653 |
|
---|
| 654 | dot3MauType10GigBaseLR OBJECT-IDENTITY
|
---|
| 655 | STATUS current
|
---|
| 656 | DESCRIPTION "R fiber over 1310 nm optics"
|
---|
| 657 | REFERENCE "[IEEE802.3], Section 52"
|
---|
| 658 | ::= { dot3MauType 35 }
|
---|
| 659 |
|
---|
| 660 | dot3MauType10GigBaseSR OBJECT-IDENTITY
|
---|
| 661 |
|
---|
| 662 | STATUS current
|
---|
| 663 | DESCRIPTION "R fiber over 850 nm optics"
|
---|
| 664 | REFERENCE "[IEEE802.3], Section 52"
|
---|
| 665 | ::= { dot3MauType 36 }
|
---|
| 666 |
|
---|
| 667 | dot3MauType10GigBaseW OBJECT-IDENTITY
|
---|
| 668 | STATUS current
|
---|
| 669 | DESCRIPTION "W PCS/PMA, unknown PMD."
|
---|
| 670 | REFERENCE "[IEEE802.3], Section 49 and 50"
|
---|
| 671 | ::= { dot3MauType 37 }
|
---|
| 672 |
|
---|
| 673 | dot3MauType10GigBaseEW OBJECT-IDENTITY
|
---|
| 674 | STATUS current
|
---|
| 675 | DESCRIPTION "W fiber over 1550 nm optics"
|
---|
| 676 | REFERENCE "[IEEE802.3], Section 52"
|
---|
| 677 | ::= { dot3MauType 38 }
|
---|
| 678 |
|
---|
| 679 | dot3MauType10GigBaseLW OBJECT-IDENTITY
|
---|
| 680 | STATUS current
|
---|
| 681 | DESCRIPTION "W fiber over 1310 nm optics"
|
---|
| 682 | REFERENCE "[IEEE802.3], Section 52"
|
---|
| 683 | ::= { dot3MauType 39 }
|
---|
| 684 |
|
---|
| 685 | dot3MauType10GigBaseSW OBJECT-IDENTITY
|
---|
| 686 | STATUS current
|
---|
| 687 | DESCRIPTION "W fiber over 850 nm optics"
|
---|
| 688 | REFERENCE "[IEEE802.3], Section 52"
|
---|
| 689 | ::= { dot3MauType 40 }
|
---|
| 690 |
|
---|
| 691 | ------ new since RFC 3636:
|
---|
| 692 | dot3MauType10GigBaseCX4 OBJECT-IDENTITY
|
---|
| 693 | STATUS current
|
---|
| 694 | DESCRIPTION "X copper over 8 pair 100-Ohm balanced cable"
|
---|
| 695 | REFERENCE "[IEEE802.3], Section 54"
|
---|
| 696 | ::= { dot3MauType 41 }
|
---|
| 697 |
|
---|
| 698 | dot3MauType2BaseTL OBJECT-IDENTITY
|
---|
| 699 | STATUS current
|
---|
| 700 | DESCRIPTION "Voice grade UTP copper, up to 2700m, optional PAF"
|
---|
| 701 | REFERENCE "[IEEE802.3], Sections 61 and 63"
|
---|
| 702 | ::= { dot3MauType 42 }
|
---|
| 703 |
|
---|
| 704 | dot3MauType10PassTS OBJECT-IDENTITY
|
---|
| 705 | STATUS current
|
---|
| 706 | DESCRIPTION "Voice grade UTP copper, up to 750m, optional PAF"
|
---|
| 707 | REFERENCE "[IEEE802.3], Sections 61 and 62"
|
---|
| 708 | ::= { dot3MauType 43 }
|
---|
| 709 |
|
---|
| 710 | dot3MauType100BaseBX10D OBJECT-IDENTITY
|
---|
| 711 | STATUS current
|
---|
| 712 | DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
|
---|
| 713 | REFERENCE "[IEEE802.3], Section 58"
|
---|
| 714 | ::= { dot3MauType 44 }
|
---|
| 715 |
|
---|
| 716 | dot3MauType100BaseBX10U OBJECT-IDENTITY
|
---|
| 717 | STATUS current
|
---|
| 718 | DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
|
---|
| 719 | REFERENCE "[IEEE802.3], Section 58"
|
---|
| 720 | ::= { dot3MauType 45 }
|
---|
| 721 |
|
---|
| 722 | dot3MauType100BaseLX10 OBJECT-IDENTITY
|
---|
| 723 | STATUS current
|
---|
| 724 | DESCRIPTION "Two single-mode fibers, long wavelength, 10km"
|
---|
| 725 | REFERENCE "[IEEE802.3], Section 58"
|
---|
| 726 | ::= { dot3MauType 46 }
|
---|
| 727 |
|
---|
| 728 | dot3MauType1000BaseBX10D OBJECT-IDENTITY
|
---|
| 729 | STATUS current
|
---|
| 730 | DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km"
|
---|
| 731 | REFERENCE "[IEEE802.3], Section 59"
|
---|
| 732 | ::= { dot3MauType 47 }
|
---|
| 733 |
|
---|
| 734 | dot3MauType1000BaseBX10U OBJECT-IDENTITY
|
---|
| 735 | STATUS current
|
---|
| 736 | DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km"
|
---|
| 737 | REFERENCE "[IEEE802.3], Section 59"
|
---|
| 738 | ::= { dot3MauType 48 }
|
---|
| 739 |
|
---|
| 740 | dot3MauType1000BaseLX10 OBJECT-IDENTITY
|
---|
| 741 | STATUS current
|
---|
| 742 | DESCRIPTION "Two sigle-mode fiber, long wavelength, 10km"
|
---|
| 743 | REFERENCE "[IEEE802.3], Section 59"
|
---|
| 744 | ::= { dot3MauType 49 }
|
---|
| 745 |
|
---|
| 746 | dot3MauType1000BasePX10D OBJECT-IDENTITY
|
---|
| 747 | STATUS current
|
---|
| 748 | DESCRIPTION "One single-mode fiber EPON OLT, 10km"
|
---|
| 749 | REFERENCE "[IEEE802.3], Section 60"
|
---|
| 750 | ::= { dot3MauType 50 }
|
---|
| 751 |
|
---|
| 752 | dot3MauType1000BasePX10U OBJECT-IDENTITY
|
---|
| 753 | STATUS current
|
---|
| 754 | DESCRIPTION "One single-mode fiber EPON ONU, 10km"
|
---|
| 755 | REFERENCE "[IEEE802.3], Section 60"
|
---|
| 756 | ::= { dot3MauType 51 }
|
---|
| 757 |
|
---|
| 758 | dot3MauType1000BasePX20D OBJECT-IDENTITY
|
---|
| 759 | STATUS current
|
---|
| 760 | DESCRIPTION "One single-mode fiber EPON OLT, 20km"
|
---|
| 761 | REFERENCE "[IEEE802.3], Section 60"
|
---|
| 762 | ::= { dot3MauType 52 }
|
---|
| 763 |
|
---|
| 764 | dot3MauType1000BasePX20U OBJECT-IDENTITY
|
---|
| 765 | STATUS current
|
---|
| 766 | DESCRIPTION "One single-mode fiber EPON ONU, 20km"
|
---|
| 767 | REFERENCE "[IEEE802.3], Section 60"
|
---|
| 768 | ::= { dot3MauType 53 }
|
---|
| 769 |
|
---|
| 770 | END
|
---|