source: azure_iot_hub/trunk/curl-7.57.0/lib/setup-vms.h@ 388

Last change on this file since 388 was 388, checked in by coas-nagasima, 5 years ago

Azure IoT Hub Device C SDK を使ったサンプルの追加

  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
  • Property svn:mime-type set to text/x-chdr
File size: 14.4 KB
Line 
1#ifndef HEADER_CURL_SETUP_VMS_H
2#define HEADER_CURL_SETUP_VMS_H
3/***************************************************************************
4 * _ _ ____ _
5 * Project ___| | | | _ \| |
6 * / __| | | | |_) | |
7 * | (__| |_| | _ <| |___
8 * \___|\___/|_| \_\_____|
9 *
10 * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
11 *
12 * This software is licensed as described in the file COPYING, which
13 * you should have received as part of this distribution. The terms
14 * are also available at https://curl.haxx.se/docs/copyright.html.
15 *
16 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
17 * copies of the Software, and permit persons to whom the Software is
18 * furnished to do so, under the terms of the COPYING file.
19 *
20 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
21 * KIND, either express or implied.
22 *
23 ***************************************************************************/
24
25/* */
26/* JEM, 12/30/12, VMS now generates config.h, so only define wrappers for */
27/* getenv(), getpwuid() and provide is_vms_shell() */
28/* Also need upper case symbols for system services, and */
29/* OpenSSL, and some Kerberos image */
30
31#ifdef __DECC
32#pragma message save
33#pragma message disable dollarid
34#endif
35
36/* Hide the stuff we are overriding */
37#define getenv decc_getenv
38#ifdef __DECC
39# if __INITIAL_POINTER_SIZE != 64
40# define getpwuid decc_getpwuid
41# endif
42#endif
43#include <stdlib.h>
44char *decc$getenv(const char *__name);
45#include <pwd.h>
46
47#include <string.h>
48#include <unixlib.h>
49
50#undef getenv
51#undef getpwuid
52#define getenv vms_getenv
53#define getpwuid vms_getpwuid
54
55/* VAX needs these in upper case when compiling exact case */
56#define sys$assign SYS$ASSIGN
57#define sys$dassgn SYS$DASSGN
58#define sys$qiow SYS$QIOW
59
60#ifdef __DECC
61# if __INITIAL_POINTER_SIZE
62# pragma __pointer_size __save
63# endif
64#endif
65
66#if __USE_LONG_GID_T
67# define decc_getpwuid DECC$__LONG_GID_GETPWUID
68#else
69# if __INITIAL_POINTER_SIZE
70# define decc_getpwuid decc$__32_getpwuid
71# else
72# define decc_getpwuid decc$getpwuid
73# endif
74#endif
75
76 struct passwd * decc_getpwuid(uid_t uid);
77
78#ifdef __DECC
79# if __INITIAL_POINTER_SIZE == 32
80/* Translate the path, but only if the path is a VMS file specification */
81/* The translation is usually only needed for older versions of VMS */
82static char *vms_translate_path(const char *path)
83{
84 char *unix_path;
85 char *test_str;
86
87 /* See if the result is in VMS format, if not, we are done */
88 /* Assume that this is a PATH, not just some data */
89 test_str = strpbrk(path, ":[<^");
90 if(test_str == NULL) {
91 return (char *)path;
92 }
93
94 unix_path = decc$translate_vms(path);
95
96 if((int)unix_path <= 0) {
97 /* We can not translate it, so return the original string */
98 return (char *)path;
99 }
100}
101# else
102 /* VMS translate path is actually not needed on the current 64 bit */
103 /* VMS platforms, so instead of figuring out the pointer settings */
104 /* Change it to a noop */
105# define vms_translate_path(__path) __path
106# endif
107#endif
108
109#ifdef __DECC
110# if __INITIAL_POINTER_SIZE
111# pragma __pointer_size __restore
112# endif
113#endif
114
115static char *vms_getenv(const char *envvar)
116{
117 char *result;
118 char *vms_path;
119
120 /* first use the DECC getenv() function */
121 result = decc$getenv(envvar);
122 if(result == NULL) {
123 return result;
124 }
125
126 vms_path = result;
127 result = vms_translate_path(vms_path);
128
129 /* note that if you backport this to use VAX C RTL, that the VAX C RTL */
130 /* may do a malloc(2048) for each call to getenv(), so you will need */
131 /* to add a free(vms_path) */
132 /* Do not do a free() for DEC C RTL builds, which should be used for */
133 /* VMS 5.5-2 and later, even if using GCC */
134
135 return result;
136}
137
138
139static struct passwd vms_passwd_cache;
140
141static struct passwd * vms_getpwuid(uid_t uid)
142{
143 struct passwd * my_passwd;
144
145/* Hack needed to support 64 bit builds, decc_getpwnam is 32 bit only */
146#ifdef __DECC
147# if __INITIAL_POINTER_SIZE
148 __char_ptr32 unix_path;
149# else
150 char *unix_path;
151# endif
152#else
153 char *unix_path;
154#endif
155
156 my_passwd = decc_getpwuid(uid);
157 if(my_passwd == NULL) {
158 return my_passwd;
159 }
160
161 unix_path = vms_translate_path(my_passwd->pw_dir);
162
163 if((long)unix_path <= 0) {
164 /* We can not translate it, so return the original string */
165 return my_passwd;
166 }
167
168 /* If no changes needed just return it */
169 if(unix_path == my_passwd->pw_dir) {
170 return my_passwd;
171 }
172
173 /* Need to copy the structure returned */
174 /* Since curl is only using pw_dir, no need to fix up */
175 /* the pw_shell when running under Bash */
176 vms_passwd_cache.pw_name = my_passwd->pw_name;
177 vms_passwd_cache.pw_uid = my_passwd->pw_uid;
178 vms_passwd_cache.pw_gid = my_passwd->pw_uid;
179 vms_passwd_cache.pw_dir = unix_path;
180 vms_passwd_cache.pw_shell = my_passwd->pw_shell;
181
182 return &vms_passwd_cache;
183}
184
185#ifdef __DECC
186#pragma message restore
187#endif
188
189/* Bug - VMS OpenSSL and Kerberos universal symbols are in uppercase only */
190/* VMS libraries should have universal symbols in exact and uppercase */
191
192#define ASN1_INTEGER_get ASN1_INTEGER_GET
193#define ASN1_STRING_data ASN1_STRING_DATA
194#define ASN1_STRING_length ASN1_STRING_LENGTH
195#define ASN1_STRING_print ASN1_STRING_PRINT
196#define ASN1_STRING_to_UTF8 ASN1_STRING_TO_UTF8
197#define ASN1_STRING_type ASN1_STRING_TYPE
198#define BIO_ctrl BIO_CTRL
199#define BIO_free BIO_FREE
200#define BIO_new BIO_NEW
201#define BIO_s_mem BIO_S_MEM
202#define BN_bn2bin BN_BN2BIN
203#define BN_num_bits BN_NUM_BITS
204#define CRYPTO_cleanup_all_ex_data CRYPTO_CLEANUP_ALL_EX_DATA
205#define CRYPTO_free CRYPTO_FREE
206#define CRYPTO_malloc CRYPTO_MALLOC
207#define CONF_modules_load_file CONF_MODULES_LOAD_FILE
208#ifdef __VAX
209# ifdef VMS_OLD_SSL
210 /* Ancient OpenSSL on VAX/VMS missing this constant */
211# define CONF_MFLAGS_IGNORE_MISSING_FILE 0x10
212# undef CONF_modules_load_file
213 static int CONF_modules_load_file(const char *filename,
214 const char *appname,
215 unsigned long flags) {
216 return 1;
217 }
218# endif
219#endif
220#define DES_ecb_encrypt DES_ECB_ENCRYPT
221#define DES_set_key DES_SET_KEY
222#define DES_set_odd_parity DES_SET_ODD_PARITY
223#define ENGINE_ctrl ENGINE_CTRL
224#define ENGINE_ctrl_cmd ENGINE_CTRL_CMD
225#define ENGINE_finish ENGINE_FINISH
226#define ENGINE_free ENGINE_FREE
227#define ENGINE_get_first ENGINE_GET_FIRST
228#define ENGINE_get_id ENGINE_GET_ID
229#define ENGINE_get_next ENGINE_GET_NEXT
230#define ENGINE_init ENGINE_INIT
231#define ENGINE_load_builtin_engines ENGINE_LOAD_BUILTIN_ENGINES
232#define ENGINE_load_private_key ENGINE_LOAD_PRIVATE_KEY
233#define ENGINE_set_default ENGINE_SET_DEFAULT
234#define ERR_clear_error ERR_CLEAR_ERROR
235#define ERR_error_string ERR_ERROR_STRING
236#define ERR_error_string_n ERR_ERROR_STRING_N
237#define ERR_free_strings ERR_FREE_STRINGS
238#define ERR_get_error ERR_GET_ERROR
239#define ERR_peek_error ERR_PEEK_ERROR
240#define ERR_remove_state ERR_REMOVE_STATE
241#define EVP_PKEY_copy_parameters EVP_PKEY_COPY_PARAMETERS
242#define EVP_PKEY_free EVP_PKEY_FREE
243#define EVP_cleanup EVP_CLEANUP
244#define GENERAL_NAMES_free GENERAL_NAMES_FREE
245#define i2d_X509_PUBKEY I2D_X509_PUBKEY
246#define MD4_Final MD4_FINAL
247#define MD4_Init MD4_INIT
248#define MD4_Update MD4_UPDATE
249#define MD5_Final MD5_FINAL
250#define MD5_Init MD5_INIT
251#define MD5_Update MD5_UPDATE
252#define OPENSSL_add_all_algo_noconf OPENSSL_ADD_ALL_ALGO_NOCONF
253#ifndef __VAX
254#define OPENSSL_load_builtin_modules OPENSSL_LOAD_BUILTIN_MODULES
255#endif
256#define PEM_read_X509 PEM_READ_X509
257#define PEM_write_bio_X509 PEM_WRITE_BIO_X509
258#define PKCS12_PBE_add PKCS12_PBE_ADD
259#define PKCS12_free PKCS12_FREE
260#define PKCS12_parse PKCS12_PARSE
261#define RAND_add RAND_ADD
262#define RAND_bytes RAND_BYTES
263#define RAND_egd RAND_EGD
264#define RAND_file_name RAND_FILE_NAME
265#define RAND_load_file RAND_LOAD_FILE
266#define RAND_status RAND_STATUS
267#define SSL_CIPHER_get_name SSL_CIPHER_GET_NAME
268#define SSL_CTX_add_client_CA SSL_CTX_ADD_CLIENT_CA
269#define SSL_CTX_callback_ctrl SSL_CTX_CALLBACK_CTRL
270#define SSL_CTX_check_private_key SSL_CTX_CHECK_PRIVATE_KEY
271#define SSL_CTX_ctrl SSL_CTX_CTRL
272#define SSL_CTX_free SSL_CTX_FREE
273#define SSL_CTX_get_cert_store SSL_CTX_GET_CERT_STORE
274#define SSL_CTX_load_verify_locations SSL_CTX_LOAD_VERIFY_LOCATIONS
275#define SSL_CTX_new SSL_CTX_NEW
276#define SSL_CTX_set_cipher_list SSL_CTX_SET_CIPHER_LIST
277#define SSL_CTX_set_def_passwd_cb_ud SSL_CTX_SET_DEF_PASSWD_CB_UD
278#define SSL_CTX_set_default_passwd_cb SSL_CTX_SET_DEFAULT_PASSWD_CB
279#define SSL_CTX_set_msg_callback SSL_CTX_SET_MSG_CALLBACK
280#define SSL_CTX_set_verify SSL_CTX_SET_VERIFY
281#define SSL_CTX_use_PrivateKey SSL_CTX_USE_PRIVATEKEY
282#define SSL_CTX_use_PrivateKey_file SSL_CTX_USE_PRIVATEKEY_FILE
283#define SSL_CTX_use_cert_chain_file SSL_CTX_USE_CERT_CHAIN_FILE
284#define SSL_CTX_use_certificate SSL_CTX_USE_CERTIFICATE
285#define SSL_CTX_use_certificate_file SSL_CTX_USE_CERTIFICATE_FILE
286#define SSL_SESSION_free SSL_SESSION_FREE
287#define SSL_connect SSL_CONNECT
288#define SSL_free SSL_FREE
289#define SSL_get1_session SSL_GET1_SESSION
290#define SSL_get_certificate SSL_GET_CERTIFICATE
291#define SSL_get_current_cipher SSL_GET_CURRENT_CIPHER
292#define SSL_get_error SSL_GET_ERROR
293#define SSL_get_peer_cert_chain SSL_GET_PEER_CERT_CHAIN
294#define SSL_get_peer_certificate SSL_GET_PEER_CERTIFICATE
295#define SSL_get_privatekey SSL_GET_PRIVATEKEY
296#define SSL_get_session SSL_GET_SESSION
297#define SSL_get_shutdown SSL_GET_SHUTDOWN
298#define SSL_get_verify_result SSL_GET_VERIFY_RESULT
299#define SSL_library_init SSL_LIBRARY_INIT
300#define SSL_load_error_strings SSL_LOAD_ERROR_STRINGS
301#define SSL_new SSL_NEW
302#define SSL_peek SSL_PEEK
303#define SSL_pending SSL_PENDING
304#define SSL_read SSL_READ
305#define SSL_set_connect_state SSL_SET_CONNECT_STATE
306#define SSL_set_fd SSL_SET_FD
307#define SSL_set_session SSL_SET_SESSION
308#define SSL_shutdown SSL_SHUTDOWN
309#define SSL_version SSL_VERSION
310#define SSL_write SSL_WRITE
311#define SSLeay SSLEAY
312#define SSLv23_client_method SSLV23_CLIENT_METHOD
313#define SSLv3_client_method SSLV3_CLIENT_METHOD
314#define TLSv1_client_method TLSV1_CLIENT_METHOD
315#define UI_create_method UI_CREATE_METHOD
316#define UI_destroy_method UI_DESTROY_METHOD
317#define UI_get0_user_data UI_GET0_USER_DATA
318#define UI_get_input_flags UI_GET_INPUT_FLAGS
319#define UI_get_string_type UI_GET_STRING_TYPE
320#define UI_create_method UI_CREATE_METHOD
321#define UI_destroy_method UI_DESTROY_METHOD
322#define UI_method_get_closer UI_METHOD_GET_CLOSER
323#define UI_method_get_opener UI_METHOD_GET_OPENER
324#define UI_method_get_reader UI_METHOD_GET_READER
325#define UI_method_get_writer UI_METHOD_GET_WRITER
326#define UI_method_set_closer UI_METHOD_SET_CLOSER
327#define UI_method_set_opener UI_METHOD_SET_OPENER
328#define UI_method_set_reader UI_METHOD_SET_READER
329#define UI_method_set_writer UI_METHOD_SET_WRITER
330#define UI_OpenSSL UI_OPENSSL
331#define UI_set_result UI_SET_RESULT
332#define X509V3_EXT_print X509V3_EXT_PRINT
333#define X509_EXTENSION_get_critical X509_EXTENSION_GET_CRITICAL
334#define X509_EXTENSION_get_data X509_EXTENSION_GET_DATA
335#define X509_EXTENSION_get_object X509_EXTENSION_GET_OBJECT
336#define X509_LOOKUP_file X509_LOOKUP_FILE
337#define X509_NAME_ENTRY_get_data X509_NAME_ENTRY_GET_DATA
338#define X509_NAME_get_entry X509_NAME_GET_ENTRY
339#define X509_NAME_get_index_by_NID X509_NAME_GET_INDEX_BY_NID
340#define X509_NAME_print_ex X509_NAME_PRINT_EX
341#define X509_STORE_CTX_get_current_cert X509_STORE_CTX_GET_CURRENT_CERT
342#define X509_STORE_add_lookup X509_STORE_ADD_LOOKUP
343#define X509_STORE_set_flags X509_STORE_SET_FLAGS
344#define X509_check_issued X509_CHECK_ISSUED
345#define X509_free X509_FREE
346#define X509_get_ext_d2i X509_GET_EXT_D2I
347#define X509_get_issuer_name X509_GET_ISSUER_NAME
348#define X509_get_pubkey X509_GET_PUBKEY
349#define X509_get_serialNumber X509_GET_SERIALNUMBER
350#define X509_get_subject_name X509_GET_SUBJECT_NAME
351#define X509_load_crl_file X509_LOAD_CRL_FILE
352#define X509_verify_cert_error_string X509_VERIFY_CERT_ERROR_STRING
353#define d2i_PKCS12_fp D2I_PKCS12_FP
354#define i2t_ASN1_OBJECT I2T_ASN1_OBJECT
355#define sk_num SK_NUM
356#define sk_pop SK_POP
357#define sk_pop_free SK_POP_FREE
358#define sk_value SK_VALUE
359#ifdef __VAX
360#define OPENSSL_NO_SHA256
361#endif
362#define SHA256_Final SHA256_FINAL
363#define SHA256_Init SHA256_INIT
364#define SHA256_Update SHA256_UPDATE
365
366#define USE_UPPERCASE_GSSAPI 1
367#define gss_seal GSS_SEAL
368#define gss_unseal GSS_UNSEAL
369
370#define USE_UPPERCASE_KRBAPI 1
371
372/* AI_NUMERICHOST needed for IP V6 support in Curl */
373#ifdef HAVE_NETDB_H
374#include <netdb.h>
375#ifndef AI_NUMERICHOST
376#ifdef ENABLE_IPV6
377#undef ENABLE_IPV6
378#endif
379#endif
380#endif
381
382/* VAX symbols are always in uppercase */
383#ifdef __VAX
384#define inflate INFLATE
385#define inflateEnd INFLATEEND
386#define inflateInit2_ INFLATEINIT2_
387#define inflateInit_ INFLATEINIT_
388#define zlibVersion ZLIBVERSION
389#endif
390
391/* Older VAX OpenSSL port defines these as Macros */
392/* Need to include the headers first and then redefine */
393/* that way a newer port will also work if some one has one */
394#ifdef __VAX
395
396# if (OPENSSL_VERSION_NUMBER < 0x00907001L)
397# define des_set_odd_parity DES_SET_ODD_PARITY
398# define des_set_key DES_SET_KEY
399# define des_ecb_encrypt DES_ECB_ENCRYPT
400
401# endif
402# include <openssl/evp.h>
403# ifndef OpenSSL_add_all_algorithms
404# define OpenSSL_add_all_algorithms OPENSSL_ADD_ALL_ALGORITHMS
405 void OPENSSL_ADD_ALL_ALGORITHMS(void);
406# endif
407
408 /* Curl defines these to lower case and VAX needs them in upper case */
409 /* So we need static routines */
410# if (OPENSSL_VERSION_NUMBER < 0x00907001L)
411
412# undef des_set_odd_parity
413# undef DES_set_odd_parity
414# undef des_set_key
415# undef DES_set_key
416# undef des_ecb_encrypt
417# undef DES_ecb_encrypt
418
419 static void des_set_odd_parity(des_cblock *key) {
420 DES_SET_ODD_PARITY(key);
421 }
422
423 static int des_set_key(const_des_cblock *key,
424 des_key_schedule schedule) {
425 return DES_SET_KEY(key, schedule);
426 }
427
428 static void des_ecb_encrypt(const_des_cblock *input,
429 des_cblock *output,
430 des_key_schedule ks, int enc) {
431 DES_ECB_ENCRYPT(input, output, ks, enc);
432 }
433#endif
434/* Need this to stop a macro redefinition error */
435#if OPENSSL_VERSION_NUMBER < 0x00907000L
436# ifdef X509_STORE_set_flags
437# undef X509_STORE_set_flags
438# define X509_STORE_set_flags(x,y) Curl_nop_stmt
439# endif
440#endif
441#endif
442
443#endif /* HEADER_CURL_SETUP_VMS_H */
Note: See TracBrowser for help on using the repository browser.