/** ****************************************************************************** * @file stm32f4xx_nucleo.h * @author MCD Application Team * @version V1.2.2 * @date 14-August-2015 * @brief This file contains definitions for: * - LEDs and push-button available on STM32F4XX-Nucleo Kit * from STMicroelectronics * - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD * shield (reference ID 802) ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2015 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4XX_NUCLEO_H #define __STM32F4XX_NUCLEO_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" /** @addtogroup BSP * @{ */ /** @addtogroup STM32F4XX_NUCLEO * @{ */ /** @addtogroup STM32F4XX_NUCLEO_LOW_LEVEL * @{ */ /** @defgroup STM32F4XX_NUCLEO_LOW_LEVEL_Exported_Types * @{ */ typedef enum { LED2 = 0 }Led_TypeDef; typedef enum { BUTTON_USER = 0, /* Alias */ BUTTON_KEY = BUTTON_USER } Button_TypeDef; typedef enum { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }ButtonMode_TypeDef; typedef enum { JOY_NONE = 0, JOY_SEL = 1, JOY_DOWN = 2, JOY_LEFT = 3, JOY_RIGHT = 4, JOY_UP = 5 }JOYState_TypeDef; /** * @} */ /** @defgroup STM32F4XX_NUCLEO_LOW_LEVEL_Exported_Constants * @{ */ /** * @brief Define for STM32F4XX_NUCLEO board */ #if !defined (USE_STM32F4XX_NUCLEO) #define USE_STM32F4XX_NUCLEO #endif /** @addtogroup STM32F4XX_NUCLEO_LOW_LEVEL_LED * @{ */ #define LEDn 1 #define LED2_PIN GPIO_PIN_5 #define LED2_GPIO_PORT GPIOA #define LED2_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() #define LED2_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE() #define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED2_GPIO_CLK_ENABLE(); \ }while(0) #define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED2_GPIO_CLK_DISABLE(); \ }while(0) /** * @} */ /** @addtogroup STM32F4XX_NUCLEO_LOW_LEVEL_BUTTON * @{ */ #define BUTTONn 1 /** * @brief Key push-button */ #define USER_BUTTON_PIN GPIO_PIN_13 #define USER_BUTTON_GPIO_PORT GPIOC #define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() #define USER_BUTTON_EXTI_LINE GPIO_PIN_13 #define USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn /* Aliases */ #define KEY_BUTTON_PIN USER_BUTTON_PIN #define KEY_BUTTON_GPIO_PORT USER_BUTTON_GPIO_PORT #define KEY_BUTTON_GPIO_CLK_ENABLE() USER_BUTTON_GPIO_CLK_ENABLE() #define KEY_BUTTON_GPIO_CLK_DISABLE() USER_BUTTON_GPIO_CLK_DISABLE() #define KEY_BUTTON_EXTI_LINE USER_BUTTON_EXTI_LINE #define KEY_BUTTON_EXTI_IRQn USER_BUTTON_EXTI_IRQn #define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) { USER_BUTTON_GPIO_CLK_ENABLE(); } } while(0) #define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) { USER_BUTTON_GPIO_CLK_DISABLE(); } } while(0) /** * @} */ /** @addtogroup STM32F4XX_NUCLEO_LOW_LEVEL_BUS * @{ */ /*############################### SPI1 #######################################*/ #define NUCLEO_SPIx SPI1 #define NUCLEO_SPIx_CLK_ENABLE() __SPI1_CLK_ENABLE() #define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1 #define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA #define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 #define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() #define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE() #define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1 #define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA #define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() #define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE() #define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 #define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 /* Maximum Timeout values for flags waiting loops. These timeouts are not based on accurate values, they just guarantee that the application will not remain stuck if the SPI communication is corrupted. You may modify these timeout values depending on CPU frequency and application conditions (interrupts routines ...). */ #define NUCLEO_SPIx_TIMEOUT_MAX 1000 /** * @brief SD Control Lines management */ #define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) #define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) /** * @brief LCD Control Lines management */ #define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) #define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) #define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) #define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) /** * @brief SD Control Interface pins */ #define SD_CS_PIN GPIO_PIN_5 #define SD_CS_GPIO_PORT GPIOB #define SD_CS_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() #define SD_CS_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE() /** * @brief LCD Control Interface pins */ #define LCD_CS_PIN GPIO_PIN_6 #define LCD_CS_GPIO_PORT GPIOB #define LCD_CS_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() #define LCD_CS_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE() /** * @brief LCD Data/Command Interface pins */ #define LCD_DC_PIN GPIO_PIN_9 #define LCD_DC_GPIO_PORT GPIOA #define LCD_DC_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE() #define LCD_DC_GPIO_CLK_DISABLE() __GPIOA_CLK_DISABLE() /*################################ ADC1 ######################################*/ /** * @brief ADC Interface pins * used to detect motion of Joystick available on Adafruit 1.8" TFT shield */ #define NUCLEO_ADCx ADC1 #define NUCLEO_ADCx_CLK_ENABLE() __ADC1_CLK_ENABLE() #define NUCLEO_ADCx_CHANNEL ADC_CHANNEL_8 #define NUCLEO_ADCx_GPIO_PORT GPIOB #define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 #define NUCLEO_ADCx_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE() #define NUCLEO_ADCx_GPIO_CLK_DISABLE() __GPIOB_CLK_DISABLE() /** * @} */ /** * @} */ /** @defgroup STM32F4XX_NUCLEO_LOW_LEVEL_Exported_Macros * @{ */ /** * @} */ /** @defgroup STM32F4XX_NUCLEO_LOW_LEVEL_Exported_Functions * @{ */ uint32_t BSP_GetVersion(void); void BSP_LED_Init(Led_TypeDef Led); void BSP_LED_On(Led_TypeDef Led); void BSP_LED_Off(Led_TypeDef Led); void BSP_LED_Toggle(Led_TypeDef Led); void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode); uint32_t BSP_PB_GetState(Button_TypeDef Button); uint8_t BSP_JOY_Init(void); JOYState_TypeDef BSP_JOY_GetState(void); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F4XX_NUCLEO_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/