[303] | 1 | /**
|
---|
| 2 | ******************************************************************************
|
---|
| 3 | * @file stm32f4xx_hal_dac_ex.c
|
---|
| 4 | * @author MCD Application Team
|
---|
| 5 | * @version V1.4.1
|
---|
| 6 | * @date 09-October-2015
|
---|
| 7 | * @brief DAC HAL module driver.
|
---|
| 8 | * This file provides firmware functions to manage the following
|
---|
| 9 | * functionalities of DAC extension peripheral:
|
---|
| 10 | * + Extended features functions
|
---|
| 11 | *
|
---|
| 12 | *
|
---|
| 13 | @verbatim
|
---|
| 14 | ==============================================================================
|
---|
| 15 | ##### How to use this driver #####
|
---|
| 16 | ==============================================================================
|
---|
| 17 | [..]
|
---|
| 18 | (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
|
---|
| 19 | Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
|
---|
| 20 | HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
|
---|
| 21 | (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
|
---|
| 22 | (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
|
---|
| 23 |
|
---|
| 24 | @endverbatim
|
---|
| 25 | ******************************************************************************
|
---|
| 26 | * @attention
|
---|
| 27 | *
|
---|
| 28 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
---|
| 29 | *
|
---|
| 30 | * Redistribution and use in source and binary forms, with or without modification,
|
---|
| 31 | * are permitted provided that the following conditions are met:
|
---|
| 32 | * 1. Redistributions of source code must retain the above copyright notice,
|
---|
| 33 | * this list of conditions and the following disclaimer.
|
---|
| 34 | * 2. Redistributions in binary form must reproduce the above copyright notice,
|
---|
| 35 | * this list of conditions and the following disclaimer in the documentation
|
---|
| 36 | * and/or other materials provided with the distribution.
|
---|
| 37 | * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
---|
| 38 | * may be used to endorse or promote products derived from this software
|
---|
| 39 | * without specific prior written permission.
|
---|
| 40 | *
|
---|
| 41 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
---|
| 42 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
---|
| 43 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
---|
| 44 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
---|
| 45 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
---|
| 46 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
---|
| 47 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
---|
| 48 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
---|
| 49 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
---|
| 50 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
---|
| 51 | *
|
---|
| 52 | ******************************************************************************
|
---|
| 53 | */
|
---|
| 54 |
|
---|
| 55 |
|
---|
| 56 | /* Includes ------------------------------------------------------------------*/
|
---|
| 57 | #include "stm32f4xx_hal.h"
|
---|
| 58 |
|
---|
| 59 | /** @addtogroup STM32F4xx_HAL_Driver
|
---|
| 60 | * @{
|
---|
| 61 | */
|
---|
| 62 |
|
---|
| 63 | /** @defgroup DACEx DACEx
|
---|
| 64 | * @brief DAC driver modules
|
---|
| 65 | * @{
|
---|
| 66 | */
|
---|
| 67 |
|
---|
| 68 | #ifdef HAL_DAC_MODULE_ENABLED
|
---|
| 69 |
|
---|
| 70 | #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
|
---|
| 71 | defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
|
---|
| 72 | defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\
|
---|
| 73 | defined(STM32F469xx) || defined(STM32F479xx)
|
---|
| 74 | /* Private typedef -----------------------------------------------------------*/
|
---|
| 75 | /* Private define ------------------------------------------------------------*/
|
---|
| 76 | /* Private macro -------------------------------------------------------------*/
|
---|
| 77 | /* Private variables ---------------------------------------------------------*/
|
---|
| 78 | /* Private function prototypes -----------------------------------------------*/
|
---|
| 79 | /* Private functions ---------------------------------------------------------*/
|
---|
| 80 | /* Exported functions --------------------------------------------------------*/
|
---|
| 81 | /** @defgroup DACEx_Exported_Functions DAC Exported Functions
|
---|
| 82 | * @{
|
---|
| 83 | */
|
---|
| 84 |
|
---|
| 85 | /** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
|
---|
| 86 | * @brief Extended features functions
|
---|
| 87 | *
|
---|
| 88 | @verbatim
|
---|
| 89 | ==============================================================================
|
---|
| 90 | ##### Extended features functions #####
|
---|
| 91 | ==============================================================================
|
---|
| 92 | [..] This section provides functions allowing to:
|
---|
| 93 | (+) Start conversion.
|
---|
| 94 | (+) Stop conversion.
|
---|
| 95 | (+) Start conversion and enable DMA transfer.
|
---|
| 96 | (+) Stop conversion and disable DMA transfer.
|
---|
| 97 | (+) Get result of conversion.
|
---|
| 98 | (+) Get result of dual mode conversion.
|
---|
| 99 |
|
---|
| 100 | @endverbatim
|
---|
| 101 | * @{
|
---|
| 102 | */
|
---|
| 103 |
|
---|
| 104 | /**
|
---|
| 105 | * @brief Returns the last data output value of the selected DAC channel.
|
---|
| 106 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 107 | * the configuration information for the specified DAC.
|
---|
| 108 | * @retval The selected DAC channel data output value.
|
---|
| 109 | */
|
---|
| 110 | uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
|
---|
| 111 | {
|
---|
| 112 | uint32_t tmp = 0;
|
---|
| 113 |
|
---|
| 114 | tmp |= hdac->Instance->DOR1;
|
---|
| 115 |
|
---|
| 116 | tmp |= hdac->Instance->DOR2 << 16;
|
---|
| 117 |
|
---|
| 118 | /* Returns the DAC channel data output register value */
|
---|
| 119 | return tmp;
|
---|
| 120 | }
|
---|
| 121 |
|
---|
| 122 | /**
|
---|
| 123 | * @brief Enables or disables the selected DAC channel wave generation.
|
---|
| 124 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 125 | * the configuration information for the specified DAC.
|
---|
| 126 | * @param Channel: The selected DAC channel.
|
---|
| 127 | * This parameter can be one of the following values:
|
---|
| 128 | * DAC_CHANNEL_1 / DAC_CHANNEL_2
|
---|
| 129 | * @param Amplitude: Select max triangle amplitude.
|
---|
| 130 | * This parameter can be one of the following values:
|
---|
| 131 | * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
|
---|
| 132 | * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
|
---|
| 133 | * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
|
---|
| 134 | * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
|
---|
| 135 | * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
|
---|
| 136 | * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
|
---|
| 137 | * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
|
---|
| 138 | * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
|
---|
| 139 | * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
|
---|
| 140 | * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
|
---|
| 141 | * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
|
---|
| 142 | * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
|
---|
| 143 | * @retval HAL status
|
---|
| 144 | */
|
---|
| 145 | HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
|
---|
| 146 | {
|
---|
| 147 | /* Check the parameters */
|
---|
| 148 | assert_param(IS_DAC_CHANNEL(Channel));
|
---|
| 149 | assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
|
---|
| 150 |
|
---|
| 151 | /* Process locked */
|
---|
| 152 | __HAL_LOCK(hdac);
|
---|
| 153 |
|
---|
| 154 | /* Change DAC state */
|
---|
| 155 | hdac->State = HAL_DAC_STATE_BUSY;
|
---|
| 156 |
|
---|
| 157 | /* Enable the selected wave generation for the selected DAC channel */
|
---|
| 158 | MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
|
---|
| 159 |
|
---|
| 160 | /* Change DAC state */
|
---|
| 161 | hdac->State = HAL_DAC_STATE_READY;
|
---|
| 162 |
|
---|
| 163 | /* Process unlocked */
|
---|
| 164 | __HAL_UNLOCK(hdac);
|
---|
| 165 |
|
---|
| 166 | /* Return function status */
|
---|
| 167 | return HAL_OK;
|
---|
| 168 | }
|
---|
| 169 |
|
---|
| 170 | /**
|
---|
| 171 | * @brief Enables or disables the selected DAC channel wave generation.
|
---|
| 172 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 173 | * the configuration information for the specified DAC.
|
---|
| 174 | * @param Channel: The selected DAC channel.
|
---|
| 175 | * This parameter can be one of the following values:
|
---|
| 176 | * DAC_CHANNEL_1 / DAC_CHANNEL_2
|
---|
| 177 | * @param Amplitude: Unmask DAC channel LFSR for noise wave generation.
|
---|
| 178 | * This parameter can be one of the following values:
|
---|
| 179 | * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
|
---|
| 180 | * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
|
---|
| 181 | * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
|
---|
| 182 | * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
|
---|
| 183 | * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
|
---|
| 184 | * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
|
---|
| 185 | * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
|
---|
| 186 | * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
|
---|
| 187 | * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
|
---|
| 188 | * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
|
---|
| 189 | * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
|
---|
| 190 | * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
|
---|
| 191 | * @retval HAL status
|
---|
| 192 | */
|
---|
| 193 | HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
|
---|
| 194 | {
|
---|
| 195 | /* Check the parameters */
|
---|
| 196 | assert_param(IS_DAC_CHANNEL(Channel));
|
---|
| 197 | assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
|
---|
| 198 |
|
---|
| 199 | /* Process locked */
|
---|
| 200 | __HAL_LOCK(hdac);
|
---|
| 201 |
|
---|
| 202 | /* Change DAC state */
|
---|
| 203 | hdac->State = HAL_DAC_STATE_BUSY;
|
---|
| 204 |
|
---|
| 205 | /* Enable the selected wave generation for the selected DAC channel */
|
---|
| 206 | MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
|
---|
| 207 |
|
---|
| 208 | /* Change DAC state */
|
---|
| 209 | hdac->State = HAL_DAC_STATE_READY;
|
---|
| 210 |
|
---|
| 211 | /* Process unlocked */
|
---|
| 212 | __HAL_UNLOCK(hdac);
|
---|
| 213 |
|
---|
| 214 | /* Return function status */
|
---|
| 215 | return HAL_OK;
|
---|
| 216 | }
|
---|
| 217 |
|
---|
| 218 | /**
|
---|
| 219 | * @brief Set the specified data holding register value for dual DAC channel.
|
---|
| 220 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 221 | * the configuration information for the specified DAC.
|
---|
| 222 | * @param Alignment: Specifies the data alignment for dual channel DAC.
|
---|
| 223 | * This parameter can be one of the following values:
|
---|
| 224 | * DAC_ALIGN_8B_R: 8bit right data alignment selected
|
---|
| 225 | * DAC_ALIGN_12B_L: 12bit left data alignment selected
|
---|
| 226 | * DAC_ALIGN_12B_R: 12bit right data alignment selected
|
---|
| 227 | * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
|
---|
| 228 | * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register.
|
---|
| 229 | * @note In dual mode, a unique register access is required to write in both
|
---|
| 230 | * DAC channels at the same time.
|
---|
| 231 | * @retval HAL status
|
---|
| 232 | */
|
---|
| 233 | HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
|
---|
| 234 | {
|
---|
| 235 | uint32_t data = 0, tmp = 0;
|
---|
| 236 |
|
---|
| 237 | /* Check the parameters */
|
---|
| 238 | assert_param(IS_DAC_ALIGN(Alignment));
|
---|
| 239 | assert_param(IS_DAC_DATA(Data1));
|
---|
| 240 | assert_param(IS_DAC_DATA(Data2));
|
---|
| 241 |
|
---|
| 242 | /* Calculate and set dual DAC data holding register value */
|
---|
| 243 | if (Alignment == DAC_ALIGN_8B_R)
|
---|
| 244 | {
|
---|
| 245 | data = ((uint32_t)Data2 << 8) | Data1;
|
---|
| 246 | }
|
---|
| 247 | else
|
---|
| 248 | {
|
---|
| 249 | data = ((uint32_t)Data2 << 16) | Data1;
|
---|
| 250 | }
|
---|
| 251 |
|
---|
| 252 | tmp = (uint32_t)hdac->Instance;
|
---|
| 253 | tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
|
---|
| 254 |
|
---|
| 255 | /* Set the dual DAC selected data holding register */
|
---|
| 256 | *(__IO uint32_t *)tmp = data;
|
---|
| 257 |
|
---|
| 258 | /* Return function status */
|
---|
| 259 | return HAL_OK;
|
---|
| 260 | }
|
---|
| 261 |
|
---|
| 262 | /**
|
---|
| 263 | * @}
|
---|
| 264 | */
|
---|
| 265 |
|
---|
| 266 | /**
|
---|
| 267 | * @brief Conversion complete callback in non blocking mode for Channel2
|
---|
| 268 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 269 | * the configuration information for the specified DAC.
|
---|
| 270 | * @retval None
|
---|
| 271 | */
|
---|
| 272 | __weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
|
---|
| 273 | {
|
---|
| 274 | /* NOTE : This function Should not be modified, when the callback is needed,
|
---|
| 275 | the HAL_DAC_ConvCpltCallback could be implemented in the user file
|
---|
| 276 | */
|
---|
| 277 | }
|
---|
| 278 |
|
---|
| 279 | /**
|
---|
| 280 | * @brief Conversion half DMA transfer callback in non blocking mode for Channel2
|
---|
| 281 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 282 | * the configuration information for the specified DAC.
|
---|
| 283 | * @retval None
|
---|
| 284 | */
|
---|
| 285 | __weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
|
---|
| 286 | {
|
---|
| 287 | /* NOTE : This function Should not be modified, when the callback is needed,
|
---|
| 288 | the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
|
---|
| 289 | */
|
---|
| 290 | }
|
---|
| 291 |
|
---|
| 292 | /**
|
---|
| 293 | * @brief Error DAC callback for Channel2.
|
---|
| 294 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 295 | * the configuration information for the specified DAC.
|
---|
| 296 | * @retval None
|
---|
| 297 | */
|
---|
| 298 | __weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
|
---|
| 299 | {
|
---|
| 300 | /* NOTE : This function Should not be modified, when the callback is needed,
|
---|
| 301 | the HAL_DAC_ErrorCallback could be implemented in the user file
|
---|
| 302 | */
|
---|
| 303 | }
|
---|
| 304 |
|
---|
| 305 | /**
|
---|
| 306 | * @brief DMA underrun DAC callback for channel2.
|
---|
| 307 | * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
|
---|
| 308 | * the configuration information for the specified DAC.
|
---|
| 309 | * @retval None
|
---|
| 310 | */
|
---|
| 311 | __weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
|
---|
| 312 | {
|
---|
| 313 | /* NOTE : This function Should not be modified, when the callback is needed,
|
---|
| 314 | the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
|
---|
| 315 | */
|
---|
| 316 | }
|
---|
| 317 |
|
---|
| 318 | /**
|
---|
| 319 | * @brief DMA conversion complete callback.
|
---|
| 320 | * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
|
---|
| 321 | * the configuration information for the specified DMA module.
|
---|
| 322 | * @retval None
|
---|
| 323 | */
|
---|
| 324 | void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
|
---|
| 325 | {
|
---|
| 326 | DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
|
---|
| 327 |
|
---|
| 328 | HAL_DACEx_ConvCpltCallbackCh2(hdac);
|
---|
| 329 |
|
---|
| 330 | hdac->State= HAL_DAC_STATE_READY;
|
---|
| 331 | }
|
---|
| 332 |
|
---|
| 333 | /**
|
---|
| 334 | * @brief DMA half transfer complete callback.
|
---|
| 335 | * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
|
---|
| 336 | * the configuration information for the specified DMA module.
|
---|
| 337 | * @retval None
|
---|
| 338 | */
|
---|
| 339 | void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
|
---|
| 340 | {
|
---|
| 341 | DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
|
---|
| 342 | /* Conversion complete callback */
|
---|
| 343 | HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
|
---|
| 344 | }
|
---|
| 345 |
|
---|
| 346 | /**
|
---|
| 347 | * @brief DMA error callback
|
---|
| 348 | * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
|
---|
| 349 | * the configuration information for the specified DMA module.
|
---|
| 350 | * @retval None
|
---|
| 351 | */
|
---|
| 352 | void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
|
---|
| 353 | {
|
---|
| 354 | DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
|
---|
| 355 |
|
---|
| 356 | /* Set DAC error code to DMA error */
|
---|
| 357 | hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
|
---|
| 358 |
|
---|
| 359 | HAL_DACEx_ErrorCallbackCh2(hdac);
|
---|
| 360 |
|
---|
| 361 | hdac->State= HAL_DAC_STATE_READY;
|
---|
| 362 | }
|
---|
| 363 |
|
---|
| 364 | /**
|
---|
| 365 | * @}
|
---|
| 366 | */
|
---|
| 367 |
|
---|
| 368 | #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
|
---|
| 369 | STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
|
---|
| 370 | STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx */
|
---|
| 371 |
|
---|
| 372 | #endif /* HAL_DAC_MODULE_ENABLED */
|
---|
| 373 |
|
---|
| 374 | /**
|
---|
| 375 | * @}
|
---|
| 376 | */
|
---|
| 377 |
|
---|
| 378 | /**
|
---|
| 379 | * @}
|
---|
| 380 | */
|
---|
| 381 |
|
---|
| 382 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
---|