[303] | 1 | /**
|
---|
| 2 | ******************************************************************************
|
---|
| 3 | * @file stm32f4xx_hal_rtc_ex.h
|
---|
| 4 | * @author MCD Application Team
|
---|
| 5 | * @version V1.4.1
|
---|
| 6 | * @date 09-October-2015
|
---|
| 7 | * @brief Header file of RTC HAL Extension module.
|
---|
| 8 | ******************************************************************************
|
---|
| 9 | * @attention
|
---|
| 10 | *
|
---|
| 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
---|
| 12 | *
|
---|
| 13 | * Redistribution and use in source and binary forms, with or without modification,
|
---|
| 14 | * are permitted provided that the following conditions are met:
|
---|
| 15 | * 1. Redistributions of source code must retain the above copyright notice,
|
---|
| 16 | * this list of conditions and the following disclaimer.
|
---|
| 17 | * 2. Redistributions in binary form must reproduce the above copyright notice,
|
---|
| 18 | * this list of conditions and the following disclaimer in the documentation
|
---|
| 19 | * and/or other materials provided with the distribution.
|
---|
| 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
---|
| 21 | * may be used to endorse or promote products derived from this software
|
---|
| 22 | * without specific prior written permission.
|
---|
| 23 | *
|
---|
| 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
---|
| 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
---|
| 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
---|
| 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
---|
| 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
---|
| 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
---|
| 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
---|
| 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
---|
| 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
---|
| 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
---|
| 34 | *
|
---|
| 35 | ******************************************************************************
|
---|
| 36 | */
|
---|
| 37 |
|
---|
| 38 | /* Define to prevent recursive inclusion -------------------------------------*/
|
---|
| 39 | #ifndef __STM32F4xx_HAL_RTC_EX_H
|
---|
| 40 | #define __STM32F4xx_HAL_RTC_EX_H
|
---|
| 41 |
|
---|
| 42 | #ifdef __cplusplus
|
---|
| 43 | extern "C" {
|
---|
| 44 | #endif
|
---|
| 45 |
|
---|
| 46 | /* Includes ------------------------------------------------------------------*/
|
---|
| 47 | #include "stm32f4xx_hal_def.h"
|
---|
| 48 |
|
---|
| 49 | /** @addtogroup STM32F4xx_HAL_Driver
|
---|
| 50 | * @{
|
---|
| 51 | */
|
---|
| 52 |
|
---|
| 53 | /** @addtogroup RTCEx
|
---|
| 54 | * @{
|
---|
| 55 | */
|
---|
| 56 |
|
---|
| 57 | /* Exported types ------------------------------------------------------------*/
|
---|
| 58 | /** @defgroup RTCEx_Exported_Types RTCEx Exported Types
|
---|
| 59 | * @{
|
---|
| 60 | */
|
---|
| 61 |
|
---|
| 62 | /**
|
---|
| 63 | * @brief RTC Tamper structure definition
|
---|
| 64 | */
|
---|
| 65 | typedef struct
|
---|
| 66 | {
|
---|
| 67 | uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
---|
| 68 | This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
---|
| 69 |
|
---|
| 70 | uint32_t PinSelection; /*!< Specifies the Tamper Pin.
|
---|
| 71 | This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
|
---|
| 72 |
|
---|
| 73 | uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
---|
| 74 | This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
---|
| 75 |
|
---|
| 76 | uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
|
---|
| 77 | This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
|
---|
| 78 |
|
---|
| 79 | uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
|
---|
| 80 | This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
|
---|
| 81 |
|
---|
| 82 | uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
|
---|
| 83 | This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
|
---|
| 84 |
|
---|
| 85 | uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
|
---|
| 86 | This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
|
---|
| 87 |
|
---|
| 88 | uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
|
---|
| 89 | This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
|
---|
| 90 | }RTC_TamperTypeDef;
|
---|
| 91 | /**
|
---|
| 92 | * @}
|
---|
| 93 | */
|
---|
| 94 |
|
---|
| 95 | /* Exported constants --------------------------------------------------------*/
|
---|
| 96 | /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
|
---|
| 97 | * @{
|
---|
| 98 | */
|
---|
| 99 |
|
---|
| 100 | /** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
|
---|
| 101 | * @{
|
---|
| 102 | */
|
---|
| 103 | #define RTC_BKP_DR0 ((uint32_t)0x00000000)
|
---|
| 104 | #define RTC_BKP_DR1 ((uint32_t)0x00000001)
|
---|
| 105 | #define RTC_BKP_DR2 ((uint32_t)0x00000002)
|
---|
| 106 | #define RTC_BKP_DR3 ((uint32_t)0x00000003)
|
---|
| 107 | #define RTC_BKP_DR4 ((uint32_t)0x00000004)
|
---|
| 108 | #define RTC_BKP_DR5 ((uint32_t)0x00000005)
|
---|
| 109 | #define RTC_BKP_DR6 ((uint32_t)0x00000006)
|
---|
| 110 | #define RTC_BKP_DR7 ((uint32_t)0x00000007)
|
---|
| 111 | #define RTC_BKP_DR8 ((uint32_t)0x00000008)
|
---|
| 112 | #define RTC_BKP_DR9 ((uint32_t)0x00000009)
|
---|
| 113 | #define RTC_BKP_DR10 ((uint32_t)0x0000000A)
|
---|
| 114 | #define RTC_BKP_DR11 ((uint32_t)0x0000000B)
|
---|
| 115 | #define RTC_BKP_DR12 ((uint32_t)0x0000000C)
|
---|
| 116 | #define RTC_BKP_DR13 ((uint32_t)0x0000000D)
|
---|
| 117 | #define RTC_BKP_DR14 ((uint32_t)0x0000000E)
|
---|
| 118 | #define RTC_BKP_DR15 ((uint32_t)0x0000000F)
|
---|
| 119 | #define RTC_BKP_DR16 ((uint32_t)0x00000010)
|
---|
| 120 | #define RTC_BKP_DR17 ((uint32_t)0x00000011)
|
---|
| 121 | #define RTC_BKP_DR18 ((uint32_t)0x00000012)
|
---|
| 122 | #define RTC_BKP_DR19 ((uint32_t)0x00000013)
|
---|
| 123 | /**
|
---|
| 124 | * @}
|
---|
| 125 | */
|
---|
| 126 |
|
---|
| 127 | /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
|
---|
| 128 | * @{
|
---|
| 129 | */
|
---|
| 130 | #define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
|
---|
| 131 | #define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
|
---|
| 132 | /**
|
---|
| 133 | * @}
|
---|
| 134 | */
|
---|
| 135 |
|
---|
| 136 | /** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
|
---|
| 137 | * @{
|
---|
| 138 | */
|
---|
| 139 | #define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
|
---|
| 140 | #define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
|
---|
| 141 | /**
|
---|
| 142 | * @}
|
---|
| 143 | */
|
---|
| 144 |
|
---|
| 145 | /** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
|
---|
| 146 | * @{
|
---|
| 147 | */
|
---|
| 148 | #define RTC_TAMPERPIN_DEFAULT ((uint32_t)0x00000000)
|
---|
| 149 | #define RTC_TAMPERPIN_POS1 ((uint32_t)0x00010000)
|
---|
| 150 | /**
|
---|
| 151 | * @}
|
---|
| 152 | */
|
---|
| 153 |
|
---|
| 154 | /** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
|
---|
| 155 | * @{
|
---|
| 156 | */
|
---|
| 157 | #define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000)
|
---|
| 158 | #define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00020000)
|
---|
| 159 | /**
|
---|
| 160 | * @}
|
---|
| 161 | */
|
---|
| 162 |
|
---|
| 163 | /** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
|
---|
| 164 | * @{
|
---|
| 165 | */
|
---|
| 166 | #define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
|
---|
| 167 | #define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
|
---|
| 168 | #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
|
---|
| 169 | #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
|
---|
| 170 | /**
|
---|
| 171 | * @}
|
---|
| 172 | */
|
---|
| 173 |
|
---|
| 174 | /** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
|
---|
| 175 | * @{
|
---|
| 176 | */
|
---|
| 177 | #define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
|
---|
| 178 |
|
---|
| 179 | #define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
|
---|
| 180 | consecutive samples at the active level */
|
---|
| 181 | #define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
|
---|
| 182 | consecutive samples at the active level */
|
---|
| 183 | #define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
|
---|
| 184 | consecutive samples at the active level. */
|
---|
| 185 | /**
|
---|
| 186 | * @}
|
---|
| 187 | */
|
---|
| 188 |
|
---|
| 189 | /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
|
---|
| 190 | * @{
|
---|
| 191 | */
|
---|
| 192 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
|
---|
| 193 | with a frequency = RTCCLK / 32768 */
|
---|
| 194 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
|
---|
| 195 | with a frequency = RTCCLK / 16384 */
|
---|
| 196 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
|
---|
| 197 | with a frequency = RTCCLK / 8192 */
|
---|
| 198 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
|
---|
| 199 | with a frequency = RTCCLK / 4096 */
|
---|
| 200 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
|
---|
| 201 | with a frequency = RTCCLK / 2048 */
|
---|
| 202 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
|
---|
| 203 | with a frequency = RTCCLK / 1024 */
|
---|
| 204 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
|
---|
| 205 | with a frequency = RTCCLK / 512 */
|
---|
| 206 | #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
|
---|
| 207 | with a frequency = RTCCLK / 256 */
|
---|
| 208 | /**
|
---|
| 209 | * @}
|
---|
| 210 | */
|
---|
| 211 |
|
---|
| 212 | /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
|
---|
| 213 | * @{
|
---|
| 214 | */
|
---|
| 215 | #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
|
---|
| 216 | sampling during 1 RTCCLK cycle */
|
---|
| 217 | #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
|
---|
| 218 | sampling during 2 RTCCLK cycles */
|
---|
| 219 | #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
|
---|
| 220 | sampling during 4 RTCCLK cycles */
|
---|
| 221 | #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
|
---|
| 222 | sampling during 8 RTCCLK cycles */
|
---|
| 223 | /**
|
---|
| 224 | * @}
|
---|
| 225 | */
|
---|
| 226 |
|
---|
| 227 | /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
|
---|
| 228 | * @{
|
---|
| 229 | */
|
---|
| 230 | #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
|
---|
| 231 | #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
|
---|
| 232 | /**
|
---|
| 233 | * @}
|
---|
| 234 | */
|
---|
| 235 |
|
---|
| 236 | /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
|
---|
| 237 | * @{
|
---|
| 238 | */
|
---|
| 239 | #define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
|
---|
| 240 | #define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
|
---|
| 241 | /**
|
---|
| 242 | * @}
|
---|
| 243 | */
|
---|
| 244 |
|
---|
| 245 | /** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
|
---|
| 246 | * @{
|
---|
| 247 | */
|
---|
| 248 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
|
---|
| 249 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
|
---|
| 250 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
|
---|
| 251 | #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
|
---|
| 252 | #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
|
---|
| 253 | #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
|
---|
| 254 | /**
|
---|
| 255 | * @}
|
---|
| 256 | */
|
---|
| 257 |
|
---|
| 258 | /** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
|
---|
| 259 | * @{
|
---|
| 260 | */
|
---|
| 261 | #define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
|
---|
| 262 | #define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
|
---|
| 263 | /**
|
---|
| 264 | * @}
|
---|
| 265 | */
|
---|
| 266 |
|
---|
| 267 | /** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
|
---|
| 268 | * @{
|
---|
| 269 | */
|
---|
| 270 | #define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
---|
| 271 | period is 32s, else 2exp20 RTCCLK seconds */
|
---|
| 272 | #define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
---|
| 273 | period is 16s, else 2exp19 RTCCLK seconds */
|
---|
| 274 | #define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
|
---|
| 275 | period is 8s, else 2exp18 RTCCLK seconds */
|
---|
| 276 | /**
|
---|
| 277 | * @}
|
---|
| 278 | */
|
---|
| 279 |
|
---|
| 280 | /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
|
---|
| 281 | * @{
|
---|
| 282 | */
|
---|
| 283 | #define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
|
---|
| 284 | during a X -second window = Y - CALM[8:0]
|
---|
| 285 | with Y = 512, 256, 128 when X = 32, 16, 8 */
|
---|
| 286 | #define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
|
---|
| 287 | during a 32-second window = CALM[8:0] */
|
---|
| 288 | /**
|
---|
| 289 | * @}
|
---|
| 290 | */
|
---|
| 291 |
|
---|
| 292 | /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
|
---|
| 293 | * @{
|
---|
| 294 | */
|
---|
| 295 | #define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
|
---|
| 296 | #define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
|
---|
| 297 | /**
|
---|
| 298 | * @}
|
---|
| 299 | */
|
---|
| 300 |
|
---|
| 301 |
|
---|
| 302 | /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
|
---|
| 303 | * @{
|
---|
| 304 | */
|
---|
| 305 | #define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
|
---|
| 306 | #define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
|
---|
| 307 | /**
|
---|
| 308 | * @}
|
---|
| 309 | */
|
---|
| 310 |
|
---|
| 311 | /**
|
---|
| 312 | * @}
|
---|
| 313 | */
|
---|
| 314 |
|
---|
| 315 | /* Exported macro ------------------------------------------------------------*/
|
---|
| 316 | /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
|
---|
| 317 | * @{
|
---|
| 318 | */
|
---|
| 319 |
|
---|
| 320 | /* ---------------------------------WAKEUPTIMER---------------------------------*/
|
---|
| 321 | /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
|
---|
| 322 | * @{
|
---|
| 323 | */
|
---|
| 324 |
|
---|
| 325 | /**
|
---|
| 326 | * @brief Enable the RTC WakeUp Timer peripheral.
|
---|
| 327 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 328 | * @retval None
|
---|
| 329 | */
|
---|
| 330 | #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
|
---|
| 331 |
|
---|
| 332 | /**
|
---|
| 333 | * @brief Disable the RTC Wake-up Timer peripheral.
|
---|
| 334 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 335 | * @retval None
|
---|
| 336 | */
|
---|
| 337 | #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
|
---|
| 338 |
|
---|
| 339 | /**
|
---|
| 340 | * @brief Enable the RTC WakeUpTimer interrupt.
|
---|
| 341 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 342 | * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
---|
| 343 | * This parameter can be:
|
---|
| 344 | * @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
---|
| 345 | * @retval None
|
---|
| 346 | */
|
---|
| 347 | #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
---|
| 348 |
|
---|
| 349 | /**
|
---|
| 350 | * @brief Disable the RTC WakeUpTimer interrupt.
|
---|
| 351 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 352 | * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
---|
| 353 | * This parameter can be:
|
---|
| 354 | * @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
---|
| 355 | * @retval None
|
---|
| 356 | */
|
---|
| 357 | #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
---|
| 358 |
|
---|
| 359 | /**
|
---|
| 360 | * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
|
---|
| 361 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 362 | * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
|
---|
| 363 | * This parameter can be:
|
---|
| 364 | * @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
---|
| 365 | * @retval None
|
---|
| 366 | */
|
---|
| 367 | #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
|
---|
| 368 |
|
---|
| 369 | /**
|
---|
| 370 | * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
|
---|
| 371 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 372 | * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
|
---|
| 373 | * This parameter can be:
|
---|
| 374 | * @arg RTC_IT_WUT: WakeUpTimer interrupt
|
---|
| 375 | * @retval None
|
---|
| 376 | */
|
---|
| 377 | #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
---|
| 378 |
|
---|
| 379 | /**
|
---|
| 380 | * @brief Get the selected RTC WakeUpTimer's flag status.
|
---|
| 381 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 382 | * @param __FLAG__: specifies the RTC WakeUpTimer Flag to check.
|
---|
| 383 | * This parameter can be:
|
---|
| 384 | * @arg RTC_FLAG_WUTF
|
---|
| 385 | * @arg RTC_FLAG_WUTWF
|
---|
| 386 | * @retval None
|
---|
| 387 | */
|
---|
| 388 | #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
---|
| 389 |
|
---|
| 390 | /**
|
---|
| 391 | * @brief Clear the RTC Wake Up timer's pending flags.
|
---|
| 392 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 393 | * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
---|
| 394 | * This parameter can be:
|
---|
| 395 | * @arg RTC_FLAG_WUTF
|
---|
| 396 | * @retval None
|
---|
| 397 | */
|
---|
| 398 | #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
---|
| 399 |
|
---|
| 400 | /**
|
---|
| 401 | * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.
|
---|
| 402 | * @retval None
|
---|
| 403 | */
|
---|
| 404 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 405 |
|
---|
| 406 | /**
|
---|
| 407 | * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.
|
---|
| 408 | * @retval None
|
---|
| 409 | */
|
---|
| 410 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
---|
| 411 |
|
---|
| 412 | /**
|
---|
| 413 | * @brief Enable event on the RTC Wake-up Timer associated Exti line.
|
---|
| 414 | * @retval None.
|
---|
| 415 | */
|
---|
| 416 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 417 |
|
---|
| 418 | /**
|
---|
| 419 | * @brief Disable event on the RTC Wake-up Timer associated Exti line.
|
---|
| 420 | * @retval None.
|
---|
| 421 | */
|
---|
| 422 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
---|
| 423 |
|
---|
| 424 | /**
|
---|
| 425 | * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
---|
| 426 | * @retval None.
|
---|
| 427 | */
|
---|
| 428 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 429 |
|
---|
| 430 | /**
|
---|
| 431 | * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
---|
| 432 | * @retval None.
|
---|
| 433 | */
|
---|
| 434 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
---|
| 435 |
|
---|
| 436 | /**
|
---|
| 437 | * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
|
---|
| 438 | * @retval None.
|
---|
| 439 | */
|
---|
| 440 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 441 |
|
---|
| 442 | /**
|
---|
| 443 | * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
|
---|
| 444 | * @retval None.
|
---|
| 445 | */
|
---|
| 446 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
|
---|
| 447 |
|
---|
| 448 | /**
|
---|
| 449 | * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
---|
| 450 | * @retval None.
|
---|
| 451 | */
|
---|
| 452 | #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
|
---|
| 453 |
|
---|
| 454 | /**
|
---|
| 455 | * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
|
---|
| 456 | * This parameter can be:
|
---|
| 457 | * @retval None.
|
---|
| 458 | */
|
---|
| 459 | #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
|
---|
| 460 |
|
---|
| 461 | /**
|
---|
| 462 | * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
|
---|
| 463 | * @retval Line Status.
|
---|
| 464 | */
|
---|
| 465 | #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 466 |
|
---|
| 467 | /**
|
---|
| 468 | * @brief Clear the RTC Wake-up Timer associated Exti line flag.
|
---|
| 469 | * @retval None.
|
---|
| 470 | */
|
---|
| 471 | #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 472 |
|
---|
| 473 | /**
|
---|
| 474 | * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
|
---|
| 475 | * @retval None.
|
---|
| 476 | */
|
---|
| 477 | #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
|
---|
| 478 |
|
---|
| 479 | /**
|
---|
| 480 | * @}
|
---|
| 481 | */
|
---|
| 482 |
|
---|
| 483 | /* ---------------------------------TIMESTAMP---------------------------------*/
|
---|
| 484 | /** @defgroup RTCEx_Timestamp RTC Timestamp
|
---|
| 485 | * @{
|
---|
| 486 | */
|
---|
| 487 |
|
---|
| 488 | /**
|
---|
| 489 | * @brief Enable the RTC TimeStamp peripheral.
|
---|
| 490 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 491 | * @retval None
|
---|
| 492 | */
|
---|
| 493 | #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
|
---|
| 494 |
|
---|
| 495 | /**
|
---|
| 496 | * @brief Disable the RTC TimeStamp peripheral.
|
---|
| 497 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 498 | * @retval None
|
---|
| 499 | */
|
---|
| 500 | #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
|
---|
| 501 |
|
---|
| 502 | /**
|
---|
| 503 | * @brief Enable the RTC TimeStamp interrupt.
|
---|
| 504 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 505 | * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
---|
| 506 | * This parameter can be:
|
---|
| 507 | * @arg RTC_IT_TS: TimeStamp interrupt
|
---|
| 508 | * @retval None
|
---|
| 509 | */
|
---|
| 510 | #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
---|
| 511 |
|
---|
| 512 | /**
|
---|
| 513 | * @brief Disable the RTC TimeStamp interrupt.
|
---|
| 514 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 515 | * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
---|
| 516 | * This parameter can be:
|
---|
| 517 | * @arg RTC_IT_TS: TimeStamp interrupt
|
---|
| 518 | * @retval None
|
---|
| 519 | */
|
---|
| 520 | #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
---|
| 521 |
|
---|
| 522 | /**
|
---|
| 523 | * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
|
---|
| 524 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 525 | * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
|
---|
| 526 | * This parameter can be:
|
---|
| 527 | * @arg RTC_IT_TS: TimeStamp interrupt
|
---|
| 528 | * @retval None
|
---|
| 529 | */
|
---|
| 530 | #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
|
---|
| 531 |
|
---|
| 532 | /**
|
---|
| 533 | * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
|
---|
| 534 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 535 | * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
|
---|
| 536 | * This parameter can be:
|
---|
| 537 | * @arg RTC_IT_TS: TimeStamp interrupt
|
---|
| 538 | * @retval None
|
---|
| 539 | */
|
---|
| 540 | #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
---|
| 541 |
|
---|
| 542 | /**
|
---|
| 543 | * @brief Get the selected RTC TimeStamp's flag status.
|
---|
| 544 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 545 | * @param __FLAG__: specifies the RTC TimeStamp flag to check.
|
---|
| 546 | * This parameter can be:
|
---|
| 547 | * @arg RTC_FLAG_TSF
|
---|
| 548 | * @arg RTC_FLAG_TSOVF
|
---|
| 549 | * @retval None
|
---|
| 550 | */
|
---|
| 551 | #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
---|
| 552 |
|
---|
| 553 | /**
|
---|
| 554 | * @brief Clear the RTC Time Stamp's pending flags.
|
---|
| 555 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 556 | * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
|
---|
| 557 | * This parameter can be:
|
---|
| 558 | * @arg RTC_FLAG_TSF
|
---|
| 559 | * @retval None
|
---|
| 560 | */
|
---|
| 561 | #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
---|
| 562 |
|
---|
| 563 | /**
|
---|
| 564 | * @}
|
---|
| 565 | */
|
---|
| 566 |
|
---|
| 567 | /* ---------------------------------TAMPER------------------------------------*/
|
---|
| 568 | /** @defgroup RTCEx_Tamper RTC Tamper
|
---|
| 569 | * @{
|
---|
| 570 | */
|
---|
| 571 |
|
---|
| 572 | /**
|
---|
| 573 | * @brief Enable the RTC Tamper1 input detection.
|
---|
| 574 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 575 | * @retval None
|
---|
| 576 | */
|
---|
| 577 | #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
|
---|
| 578 |
|
---|
| 579 | /**
|
---|
| 580 | * @brief Disable the RTC Tamper1 input detection.
|
---|
| 581 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 582 | * @retval None
|
---|
| 583 | */
|
---|
| 584 | #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
|
---|
| 585 |
|
---|
| 586 | /**
|
---|
| 587 | * @brief Enable the RTC Tamper2 input detection.
|
---|
| 588 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 589 | * @retval None
|
---|
| 590 | */
|
---|
| 591 | #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
|
---|
| 592 |
|
---|
| 593 | /**
|
---|
| 594 | * @brief Disable the RTC Tamper2 input detection.
|
---|
| 595 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 596 | * @retval None
|
---|
| 597 | */
|
---|
| 598 | #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
|
---|
| 599 |
|
---|
| 600 | /**
|
---|
| 601 | * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
|
---|
| 602 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 603 | * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
|
---|
| 604 | * This parameter can be:
|
---|
| 605 | * @arg RTC_IT_TAMP1
|
---|
| 606 | * @arg RTC_IT_TAMP2
|
---|
| 607 | * @retval None
|
---|
| 608 | */
|
---|
| 609 | #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
|
---|
| 610 |
|
---|
| 611 | /**
|
---|
| 612 | * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
|
---|
| 613 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 614 | * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
|
---|
| 615 | * This parameter can be:
|
---|
| 616 | * @arg RTC_IT_TAMP: Tamper interrupt
|
---|
| 617 | * @retval None
|
---|
| 618 | */
|
---|
| 619 | #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
|
---|
| 620 |
|
---|
| 621 | /**
|
---|
| 622 | * @brief Get the selected RTC Tamper's flag status.
|
---|
| 623 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 624 | * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
---|
| 625 | * This parameter can be:
|
---|
| 626 | * @arg RTC_FLAG_TAMP1F
|
---|
| 627 | * @arg RTC_FLAG_TAMP2F
|
---|
| 628 | * @retval None
|
---|
| 629 | */
|
---|
| 630 | #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
---|
| 631 |
|
---|
| 632 | /**
|
---|
| 633 | * @brief Clear the RTC Tamper's pending flags.
|
---|
| 634 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 635 | * @param __FLAG__: specifies the RTC Tamper Flag to clear.
|
---|
| 636 | * This parameter can be:
|
---|
| 637 | * @arg RTC_FLAG_TAMP1F
|
---|
| 638 | * @arg RTC_FLAG_TAMP2F
|
---|
| 639 | * @retval None
|
---|
| 640 | */
|
---|
| 641 | #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
---|
| 642 | /**
|
---|
| 643 | * @}
|
---|
| 644 | */
|
---|
| 645 |
|
---|
| 646 | /* --------------------------TAMPER/TIMESTAMP---------------------------------*/
|
---|
| 647 | /** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
|
---|
| 648 | * @{
|
---|
| 649 | */
|
---|
| 650 |
|
---|
| 651 | /**
|
---|
| 652 | * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 653 | * @retval None
|
---|
| 654 | */
|
---|
| 655 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 656 |
|
---|
| 657 | /**
|
---|
| 658 | * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 659 | * @retval None
|
---|
| 660 | */
|
---|
| 661 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
---|
| 662 |
|
---|
| 663 | /**
|
---|
| 664 | * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 665 | * @retval None.
|
---|
| 666 | */
|
---|
| 667 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 668 |
|
---|
| 669 | /**
|
---|
| 670 | * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 671 | * @retval None.
|
---|
| 672 | */
|
---|
| 673 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
---|
| 674 |
|
---|
| 675 | /**
|
---|
| 676 | * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 677 | * @retval None.
|
---|
| 678 | */
|
---|
| 679 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 680 |
|
---|
| 681 | /**
|
---|
| 682 | * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 683 | * @retval None.
|
---|
| 684 | */
|
---|
| 685 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
---|
| 686 |
|
---|
| 687 | /**
|
---|
| 688 | * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 689 | * @retval None.
|
---|
| 690 | */
|
---|
| 691 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 692 |
|
---|
| 693 | /**
|
---|
| 694 | * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 695 | * @retval None.
|
---|
| 696 | */
|
---|
| 697 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
|
---|
| 698 |
|
---|
| 699 | /**
|
---|
| 700 | * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 701 | * @retval None.
|
---|
| 702 | */
|
---|
| 703 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
|
---|
| 704 |
|
---|
| 705 | /**
|
---|
| 706 | * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
|
---|
| 707 | * This parameter can be:
|
---|
| 708 | * @retval None.
|
---|
| 709 | */
|
---|
| 710 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
|
---|
| 711 |
|
---|
| 712 | /**
|
---|
| 713 | * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
|
---|
| 714 | * @retval Line Status.
|
---|
| 715 | */
|
---|
| 716 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 717 |
|
---|
| 718 | /**
|
---|
| 719 | * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
|
---|
| 720 | * @retval None.
|
---|
| 721 | */
|
---|
| 722 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 723 |
|
---|
| 724 | /**
|
---|
| 725 | * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
|
---|
| 726 | * @retval None.
|
---|
| 727 | */
|
---|
| 728 | #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
|
---|
| 729 | /**
|
---|
| 730 | * @}
|
---|
| 731 | */
|
---|
| 732 |
|
---|
| 733 | /* ------------------------------Calibration----------------------------------*/
|
---|
| 734 | /** @defgroup RTCEx_Calibration RTC Calibration
|
---|
| 735 | * @{
|
---|
| 736 | */
|
---|
| 737 |
|
---|
| 738 | /**
|
---|
| 739 | * @brief Enable the Coarse calibration process.
|
---|
| 740 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 741 | * @retval None
|
---|
| 742 | */
|
---|
| 743 | #define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
|
---|
| 744 |
|
---|
| 745 | /**
|
---|
| 746 | * @brief Disable the Coarse calibration process.
|
---|
| 747 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 748 | * @retval None
|
---|
| 749 | */
|
---|
| 750 | #define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
|
---|
| 751 |
|
---|
| 752 | /**
|
---|
| 753 | * @brief Enable the RTC calibration output.
|
---|
| 754 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 755 | * @retval None
|
---|
| 756 | */
|
---|
| 757 | #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
|
---|
| 758 |
|
---|
| 759 | /**
|
---|
| 760 | * @brief Disable the calibration output.
|
---|
| 761 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 762 | * @retval None
|
---|
| 763 | */
|
---|
| 764 | #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
|
---|
| 765 |
|
---|
| 766 | /**
|
---|
| 767 | * @brief Enable the clock reference detection.
|
---|
| 768 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 769 | * @retval None
|
---|
| 770 | */
|
---|
| 771 | #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
|
---|
| 772 |
|
---|
| 773 | /**
|
---|
| 774 | * @brief Disable the clock reference detection.
|
---|
| 775 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 776 | * @retval None
|
---|
| 777 | */
|
---|
| 778 | #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
|
---|
| 779 |
|
---|
| 780 | /**
|
---|
| 781 | * @brief Get the selected RTC shift operation's flag status.
|
---|
| 782 | * @param __HANDLE__: specifies the RTC handle.
|
---|
| 783 | * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
|
---|
| 784 | * This parameter can be:
|
---|
| 785 | * @arg RTC_FLAG_SHPF
|
---|
| 786 | * @retval None
|
---|
| 787 | */
|
---|
| 788 | #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
---|
| 789 | /**
|
---|
| 790 | * @}
|
---|
| 791 | */
|
---|
| 792 |
|
---|
| 793 | /**
|
---|
| 794 | * @}
|
---|
| 795 | */
|
---|
| 796 |
|
---|
| 797 | /* Exported functions --------------------------------------------------------*/
|
---|
| 798 | /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
|
---|
| 799 | * @{
|
---|
| 800 | */
|
---|
| 801 |
|
---|
| 802 | /** @addtogroup RTCEx_Exported_Functions_Group1
|
---|
| 803 | * @{
|
---|
| 804 | */
|
---|
| 805 | /* RTC TimeStamp and Tamper functions *****************************************/
|
---|
| 806 | HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
---|
| 807 | HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
---|
| 808 | HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
|
---|
| 809 | HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
|
---|
| 810 |
|
---|
| 811 | HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
---|
| 812 | HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
---|
| 813 | HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
---|
| 814 | void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
|
---|
| 815 |
|
---|
| 816 | void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
---|
| 817 | void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
|
---|
| 818 | void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
|
---|
| 819 | HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
---|
| 820 | HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
---|
| 821 | HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
---|
| 822 | /**
|
---|
| 823 | * @}
|
---|
| 824 | */
|
---|
| 825 |
|
---|
| 826 | /** @addtogroup RTCEx_Exported_Functions_Group2
|
---|
| 827 | * @{
|
---|
| 828 | */
|
---|
| 829 | /* RTC Wake-up functions ******************************************************/
|
---|
| 830 | HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
---|
| 831 | HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
---|
| 832 | uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
---|
| 833 | uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
---|
| 834 | void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
|
---|
| 835 | void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
|
---|
| 836 | HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
---|
| 837 | /**
|
---|
| 838 | * @}
|
---|
| 839 | */
|
---|
| 840 |
|
---|
| 841 | /** @addtogroup RTCEx_Exported_Functions_Group3
|
---|
| 842 | * @{
|
---|
| 843 | */
|
---|
| 844 | /* Extension Control functions ************************************************/
|
---|
| 845 | void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
---|
| 846 | uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
---|
| 847 |
|
---|
| 848 | HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
|
---|
| 849 | HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
|
---|
| 850 | HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
|
---|
| 851 | HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
|
---|
| 852 | HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
|
---|
| 853 | HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
---|
| 854 | HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
|
---|
| 855 | HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
|
---|
| 856 | HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
|
---|
| 857 | HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
|
---|
| 858 | /**
|
---|
| 859 | * @}
|
---|
| 860 | */
|
---|
| 861 |
|
---|
| 862 | /** @addtogroup RTCEx_Exported_Functions_Group4
|
---|
| 863 | * @{
|
---|
| 864 | */
|
---|
| 865 | /* Extension RTC features functions *******************************************/
|
---|
| 866 | void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
|
---|
| 867 | HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
---|
| 868 | /**
|
---|
| 869 | * @}
|
---|
| 870 | */
|
---|
| 871 |
|
---|
| 872 | /**
|
---|
| 873 | * @}
|
---|
| 874 | */
|
---|
| 875 |
|
---|
| 876 | /* Private types -------------------------------------------------------------*/
|
---|
| 877 | /* Private variables ---------------------------------------------------------*/
|
---|
| 878 | /* Private constants ---------------------------------------------------------*/
|
---|
| 879 | /** @defgroup RTCEx_Private_Constants RTCEx Private Constants
|
---|
| 880 | * @{
|
---|
| 881 | */
|
---|
| 882 | #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
---|
| 883 | #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
|
---|
| 884 | /**
|
---|
| 885 | * @}
|
---|
| 886 | */
|
---|
| 887 |
|
---|
| 888 | /* Private macros ------------------------------------------------------------*/
|
---|
| 889 | /** @defgroup RTCEx_Private_Macros RTCEx Private Macros
|
---|
| 890 | * @{
|
---|
| 891 | */
|
---|
| 892 |
|
---|
| 893 | /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
|
---|
| 894 | * @{
|
---|
| 895 | */
|
---|
| 896 | #define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
|
---|
| 897 | ((BKP) == RTC_BKP_DR1) || \
|
---|
| 898 | ((BKP) == RTC_BKP_DR2) || \
|
---|
| 899 | ((BKP) == RTC_BKP_DR3) || \
|
---|
| 900 | ((BKP) == RTC_BKP_DR4) || \
|
---|
| 901 | ((BKP) == RTC_BKP_DR5) || \
|
---|
| 902 | ((BKP) == RTC_BKP_DR6) || \
|
---|
| 903 | ((BKP) == RTC_BKP_DR7) || \
|
---|
| 904 | ((BKP) == RTC_BKP_DR8) || \
|
---|
| 905 | ((BKP) == RTC_BKP_DR9) || \
|
---|
| 906 | ((BKP) == RTC_BKP_DR10) || \
|
---|
| 907 | ((BKP) == RTC_BKP_DR11) || \
|
---|
| 908 | ((BKP) == RTC_BKP_DR12) || \
|
---|
| 909 | ((BKP) == RTC_BKP_DR13) || \
|
---|
| 910 | ((BKP) == RTC_BKP_DR14) || \
|
---|
| 911 | ((BKP) == RTC_BKP_DR15) || \
|
---|
| 912 | ((BKP) == RTC_BKP_DR16) || \
|
---|
| 913 | ((BKP) == RTC_BKP_DR17) || \
|
---|
| 914 | ((BKP) == RTC_BKP_DR18) || \
|
---|
| 915 | ((BKP) == RTC_BKP_DR19))
|
---|
| 916 | #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
|
---|
| 917 | ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
|
---|
| 918 | #define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00) && ((TAMPER) != (uint32_t)RESET))
|
---|
| 919 |
|
---|
| 920 | #define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \
|
---|
| 921 | ((PIN) == RTC_TAMPERPIN_POS1))
|
---|
| 922 |
|
---|
| 923 | #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \
|
---|
| 924 | ((PIN) == RTC_TIMESTAMPPIN_POS1))
|
---|
| 925 |
|
---|
| 926 | #define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
|
---|
| 927 | ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
|
---|
| 928 | ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
|
---|
| 929 | ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
|
---|
| 930 | #define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
|
---|
| 931 | ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
|
---|
| 932 | ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
|
---|
| 933 | ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
|
---|
| 934 | #define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
|
---|
| 935 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
|
---|
| 936 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
|
---|
| 937 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
|
---|
| 938 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
|
---|
| 939 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
|
---|
| 940 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
|
---|
| 941 | ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
|
---|
| 942 | #define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
|
---|
| 943 | ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
|
---|
| 944 | ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
|
---|
| 945 | ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
|
---|
| 946 | #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
|
---|
| 947 | ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
|
---|
| 948 | #define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
|
---|
| 949 | ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
|
---|
| 950 | #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
|
---|
| 951 | ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
|
---|
| 952 | ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
|
---|
| 953 | ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
|
---|
| 954 | ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
|
---|
| 955 | ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
|
---|
| 956 |
|
---|
| 957 | #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
|
---|
| 958 | #define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
|
---|
| 959 | ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
|
---|
| 960 |
|
---|
| 961 | #define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
|
---|
| 962 |
|
---|
| 963 | #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
|
---|
| 964 | ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
|
---|
| 965 | ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
|
---|
| 966 | #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
|
---|
| 967 | ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
|
---|
| 968 |
|
---|
| 969 |
|
---|
| 970 | #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
|
---|
| 971 | #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
|
---|
| 972 | ((SEL) == RTC_SHIFTADD1S_SET))
|
---|
| 973 | #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
|
---|
| 974 | #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
|
---|
| 975 | ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
|
---|
| 976 | /**
|
---|
| 977 | * @}
|
---|
| 978 | */
|
---|
| 979 |
|
---|
| 980 | /**
|
---|
| 981 | * @}
|
---|
| 982 | */
|
---|
| 983 |
|
---|
| 984 | /**
|
---|
| 985 | * @}
|
---|
| 986 | */
|
---|
| 987 |
|
---|
| 988 | /**
|
---|
| 989 | * @}
|
---|
| 990 | */
|
---|
| 991 |
|
---|
| 992 | #ifdef __cplusplus
|
---|
| 993 | }
|
---|
| 994 | #endif
|
---|
| 995 |
|
---|
| 996 | #endif /* __STM32F4xx_HAL_RTC_EX_H */
|
---|
| 997 |
|
---|
| 998 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
---|