[303] | 1 | /**
|
---|
| 2 | ******************************************************************************
|
---|
| 3 | * @file stm32f4xx_hal_flash.h
|
---|
| 4 | * @author MCD Application Team
|
---|
| 5 | * @version V1.4.1
|
---|
| 6 | * @date 09-October-2015
|
---|
| 7 | * @brief Header file of FLASH HAL module.
|
---|
| 8 | ******************************************************************************
|
---|
| 9 | * @attention
|
---|
| 10 | *
|
---|
| 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
|
---|
| 12 | *
|
---|
| 13 | * Redistribution and use in source and binary forms, with or without modification,
|
---|
| 14 | * are permitted provided that the following conditions are met:
|
---|
| 15 | * 1. Redistributions of source code must retain the above copyright notice,
|
---|
| 16 | * this list of conditions and the following disclaimer.
|
---|
| 17 | * 2. Redistributions in binary form must reproduce the above copyright notice,
|
---|
| 18 | * this list of conditions and the following disclaimer in the documentation
|
---|
| 19 | * and/or other materials provided with the distribution.
|
---|
| 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
---|
| 21 | * may be used to endorse or promote products derived from this software
|
---|
| 22 | * without specific prior written permission.
|
---|
| 23 | *
|
---|
| 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
---|
| 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
---|
| 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
---|
| 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
---|
| 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
---|
| 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
---|
| 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
---|
| 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
---|
| 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
---|
| 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
---|
| 34 | *
|
---|
| 35 | ******************************************************************************
|
---|
| 36 | */
|
---|
| 37 |
|
---|
| 38 | /* Define to prevent recursive inclusion -------------------------------------*/
|
---|
| 39 | #ifndef __STM32F4xx_HAL_FLASH_H
|
---|
| 40 | #define __STM32F4xx_HAL_FLASH_H
|
---|
| 41 |
|
---|
| 42 | #ifdef __cplusplus
|
---|
| 43 | extern "C" {
|
---|
| 44 | #endif
|
---|
| 45 |
|
---|
| 46 | /* Includes ------------------------------------------------------------------*/
|
---|
| 47 | #include "stm32f4xx_hal_def.h"
|
---|
| 48 |
|
---|
| 49 | /** @addtogroup STM32F4xx_HAL_Driver
|
---|
| 50 | * @{
|
---|
| 51 | */
|
---|
| 52 |
|
---|
| 53 | /** @addtogroup FLASH
|
---|
| 54 | * @{
|
---|
| 55 | */
|
---|
| 56 |
|
---|
| 57 | /* Exported types ------------------------------------------------------------*/
|
---|
| 58 | /** @defgroup FLASH_Exported_Types FLASH Exported Types
|
---|
| 59 | * @{
|
---|
| 60 | */
|
---|
| 61 |
|
---|
| 62 | /**
|
---|
| 63 | * @brief FLASH Procedure structure definition
|
---|
| 64 | */
|
---|
| 65 | typedef enum
|
---|
| 66 | {
|
---|
| 67 | FLASH_PROC_NONE = 0,
|
---|
| 68 | FLASH_PROC_SECTERASE,
|
---|
| 69 | FLASH_PROC_MASSERASE,
|
---|
| 70 | FLASH_PROC_PROGRAM
|
---|
| 71 | } FLASH_ProcedureTypeDef;
|
---|
| 72 |
|
---|
| 73 | /**
|
---|
| 74 | * @brief FLASH handle Structure definition
|
---|
| 75 | */
|
---|
| 76 | typedef struct
|
---|
| 77 | {
|
---|
| 78 | __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
|
---|
| 79 |
|
---|
| 80 | __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
|
---|
| 81 |
|
---|
| 82 | __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
|
---|
| 83 |
|
---|
| 84 | __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
|
---|
| 85 |
|
---|
| 86 | __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
|
---|
| 87 |
|
---|
| 88 | __IO uint32_t Address; /*Internal variable to save address selected for program*/
|
---|
| 89 |
|
---|
| 90 | HAL_LockTypeDef Lock; /* FLASH locking object */
|
---|
| 91 |
|
---|
| 92 | __IO uint32_t ErrorCode; /* FLASH error code */
|
---|
| 93 |
|
---|
| 94 | }FLASH_ProcessTypeDef;
|
---|
| 95 |
|
---|
| 96 | /**
|
---|
| 97 | * @}
|
---|
| 98 | */
|
---|
| 99 |
|
---|
| 100 | /* Exported constants --------------------------------------------------------*/
|
---|
| 101 | /** @defgroup FLASH_Exported_Constants FLASH Exported Constants
|
---|
| 102 | * @{
|
---|
| 103 | */
|
---|
| 104 | /** @defgroup FLASH_Error_Code FLASH Error Code
|
---|
| 105 | * @brief FLASH Error Code
|
---|
| 106 | * @{
|
---|
| 107 | */
|
---|
| 108 | #define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
|
---|
| 109 | #define HAL_FLASH_ERROR_RD ((uint32_t)0x00000001) /*!< Read Protection error */
|
---|
| 110 | #define HAL_FLASH_ERROR_PGS ((uint32_t)0x00000002) /*!< Programming Sequence error */
|
---|
| 111 | #define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004) /*!< Programming Parallelism error */
|
---|
| 112 | #define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008) /*!< Programming Alignment error */
|
---|
| 113 | #define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010) /*!< Write protection error */
|
---|
| 114 | #define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020) /*!< Operation Error */
|
---|
| 115 | /**
|
---|
| 116 | * @}
|
---|
| 117 | */
|
---|
| 118 |
|
---|
| 119 | /** @defgroup FLASH_Type_Program FLASH Type Program
|
---|
| 120 | * @{
|
---|
| 121 | */
|
---|
| 122 | #define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
|
---|
| 123 | #define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
|
---|
| 124 | #define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
|
---|
| 125 | #define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
|
---|
| 126 | /**
|
---|
| 127 | * @}
|
---|
| 128 | */
|
---|
| 129 |
|
---|
| 130 | /** @defgroup FLASH_Flag_definition FLASH Flag definition
|
---|
| 131 | * @brief Flag definition
|
---|
| 132 | * @{
|
---|
| 133 | */
|
---|
| 134 | #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
|
---|
| 135 | #define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
|
---|
| 136 | #define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
|
---|
| 137 | #define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
|
---|
| 138 | #define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
|
---|
| 139 | #define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
|
---|
| 140 | #define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
|
---|
| 141 | #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
|
---|
| 142 | /**
|
---|
| 143 | * @}
|
---|
| 144 | */
|
---|
| 145 |
|
---|
| 146 | /** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
|
---|
| 147 | * @brief FLASH Interrupt definition
|
---|
| 148 | * @{
|
---|
| 149 | */
|
---|
| 150 | #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
|
---|
| 151 | #define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
|
---|
| 152 | /**
|
---|
| 153 | * @}
|
---|
| 154 | */
|
---|
| 155 |
|
---|
| 156 | /** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
|
---|
| 157 | * @{
|
---|
| 158 | */
|
---|
| 159 | #define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
|
---|
| 160 | #define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
|
---|
| 161 | #define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
|
---|
| 162 | #define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
|
---|
| 163 | #define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
|
---|
| 164 | /**
|
---|
| 165 | * @}
|
---|
| 166 | */
|
---|
| 167 |
|
---|
| 168 | /** @defgroup FLASH_Keys FLASH Keys
|
---|
| 169 | * @{
|
---|
| 170 | */
|
---|
| 171 | #define RDP_KEY ((uint16_t)0x00A5)
|
---|
| 172 | #define FLASH_KEY1 ((uint32_t)0x45670123)
|
---|
| 173 | #define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
|
---|
| 174 | #define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
|
---|
| 175 | #define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
|
---|
| 176 | /**
|
---|
| 177 | * @}
|
---|
| 178 | */
|
---|
| 179 |
|
---|
| 180 | /**
|
---|
| 181 | * @}
|
---|
| 182 | */
|
---|
| 183 |
|
---|
| 184 | /* Exported macro ------------------------------------------------------------*/
|
---|
| 185 | /** @defgroup FLASH_Exported_Macros FLASH Exported Macros
|
---|
| 186 | * @{
|
---|
| 187 | */
|
---|
| 188 | /**
|
---|
| 189 | * @brief Set the FLASH Latency.
|
---|
| 190 | * @param __LATENCY__: FLASH Latency
|
---|
| 191 | * The value of this parameter depend on device used within the same series
|
---|
| 192 | * @retval none
|
---|
| 193 | */
|
---|
| 194 | #define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
|
---|
| 195 |
|
---|
| 196 | /**
|
---|
| 197 | * @brief Get the FLASH Latency.
|
---|
| 198 | * @retval FLASH Latency
|
---|
| 199 | * The value of this parameter depend on device used within the same series
|
---|
| 200 | */
|
---|
| 201 | #define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
|
---|
| 202 |
|
---|
| 203 | /**
|
---|
| 204 | * @brief Enable the FLASH prefetch buffer.
|
---|
| 205 | * @retval none
|
---|
| 206 | */
|
---|
| 207 | #define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
|
---|
| 208 |
|
---|
| 209 | /**
|
---|
| 210 | * @brief Disable the FLASH prefetch buffer.
|
---|
| 211 | * @retval none
|
---|
| 212 | */
|
---|
| 213 | #define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
|
---|
| 214 |
|
---|
| 215 | /**
|
---|
| 216 | * @brief Enable the FLASH instruction cache.
|
---|
| 217 | * @retval none
|
---|
| 218 | */
|
---|
| 219 | #define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
|
---|
| 220 |
|
---|
| 221 | /**
|
---|
| 222 | * @brief Disable the FLASH instruction cache.
|
---|
| 223 | * @retval none
|
---|
| 224 | */
|
---|
| 225 | #define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
|
---|
| 226 |
|
---|
| 227 | /**
|
---|
| 228 | * @brief Enable the FLASH data cache.
|
---|
| 229 | * @retval none
|
---|
| 230 | */
|
---|
| 231 | #define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
|
---|
| 232 |
|
---|
| 233 | /**
|
---|
| 234 | * @brief Disable the FLASH data cache.
|
---|
| 235 | * @retval none
|
---|
| 236 | */
|
---|
| 237 | #define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
|
---|
| 238 |
|
---|
| 239 | /**
|
---|
| 240 | * @brief Resets the FLASH instruction Cache.
|
---|
| 241 | * @note This function must be used only when the Instruction Cache is disabled.
|
---|
| 242 | * @retval None
|
---|
| 243 | */
|
---|
| 244 | #define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
|
---|
| 245 | FLASH->ACR &= ~FLASH_ACR_ICRST; \
|
---|
| 246 | }while(0)
|
---|
| 247 |
|
---|
| 248 | /**
|
---|
| 249 | * @brief Resets the FLASH data Cache.
|
---|
| 250 | * @note This function must be used only when the data Cache is disabled.
|
---|
| 251 | * @retval None
|
---|
| 252 | */
|
---|
| 253 | #define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
|
---|
| 254 | FLASH->ACR &= ~FLASH_ACR_DCRST; \
|
---|
| 255 | }while(0)
|
---|
| 256 | /**
|
---|
| 257 | * @brief Enable the specified FLASH interrupt.
|
---|
| 258 | * @param __INTERRUPT__ : FLASH interrupt
|
---|
| 259 | * This parameter can be any combination of the following values:
|
---|
| 260 | * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
---|
| 261 | * @arg FLASH_IT_ERR: Error Interrupt
|
---|
| 262 | * @retval none
|
---|
| 263 | */
|
---|
| 264 | #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
|
---|
| 265 |
|
---|
| 266 | /**
|
---|
| 267 | * @brief Disable the specified FLASH interrupt.
|
---|
| 268 | * @param __INTERRUPT__ : FLASH interrupt
|
---|
| 269 | * This parameter can be any combination of the following values:
|
---|
| 270 | * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
|
---|
| 271 | * @arg FLASH_IT_ERR: Error Interrupt
|
---|
| 272 | * @retval none
|
---|
| 273 | */
|
---|
| 274 | #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
|
---|
| 275 |
|
---|
| 276 | /**
|
---|
| 277 | * @brief Get the specified FLASH flag status.
|
---|
| 278 | * @param __FLAG__: specifies the FLASH flag to check.
|
---|
| 279 | * This parameter can be one of the following values:
|
---|
| 280 | * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
---|
| 281 | * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
---|
| 282 | * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
---|
| 283 | * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
---|
| 284 | * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
---|
| 285 | * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
---|
| 286 | * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
|
---|
| 287 | * @arg FLASH_FLAG_BSY : FLASH Busy flag
|
---|
| 288 | * @retval The new state of __FLAG__ (SET or RESET).
|
---|
| 289 | */
|
---|
| 290 | #define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
|
---|
| 291 |
|
---|
| 292 | /**
|
---|
| 293 | * @brief Clear the specified FLASH flag.
|
---|
| 294 | * @param __FLAG__: specifies the FLASH flags to clear.
|
---|
| 295 | * This parameter can be any combination of the following values:
|
---|
| 296 | * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
|
---|
| 297 | * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
|
---|
| 298 | * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
|
---|
| 299 | * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
|
---|
| 300 | * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
|
---|
| 301 | * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
|
---|
| 302 | * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
|
---|
| 303 | * @retval none
|
---|
| 304 | */
|
---|
| 305 | #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
|
---|
| 306 | /**
|
---|
| 307 | * @}
|
---|
| 308 | */
|
---|
| 309 |
|
---|
| 310 | /* Include FLASH HAL Extension module */
|
---|
| 311 | #include "stm32f4xx_hal_flash_ex.h"
|
---|
| 312 | #include "stm32f4xx_hal_flash_ramfunc.h"
|
---|
| 313 |
|
---|
| 314 | /* Exported functions --------------------------------------------------------*/
|
---|
| 315 | /** @addtogroup FLASH_Exported_Functions
|
---|
| 316 | * @{
|
---|
| 317 | */
|
---|
| 318 | /** @addtogroup FLASH_Exported_Functions_Group1
|
---|
| 319 | * @{
|
---|
| 320 | */
|
---|
| 321 | /* Program operation functions ***********************************************/
|
---|
| 322 | HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
---|
| 323 | HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
|
---|
| 324 | /* FLASH IRQ handler method */
|
---|
| 325 | void HAL_FLASH_IRQHandler(void);
|
---|
| 326 | /* Callbacks in non blocking modes */
|
---|
| 327 | void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
|
---|
| 328 | void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
|
---|
| 329 | /**
|
---|
| 330 | * @}
|
---|
| 331 | */
|
---|
| 332 |
|
---|
| 333 | /** @addtogroup FLASH_Exported_Functions_Group2
|
---|
| 334 | * @{
|
---|
| 335 | */
|
---|
| 336 | /* Peripheral Control functions **********************************************/
|
---|
| 337 | HAL_StatusTypeDef HAL_FLASH_Unlock(void);
|
---|
| 338 | HAL_StatusTypeDef HAL_FLASH_Lock(void);
|
---|
| 339 | HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
|
---|
| 340 | HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
|
---|
| 341 | /* Option bytes control */
|
---|
| 342 | HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
|
---|
| 343 | /**
|
---|
| 344 | * @}
|
---|
| 345 | */
|
---|
| 346 |
|
---|
| 347 | /** @addtogroup FLASH_Exported_Functions_Group3
|
---|
| 348 | * @{
|
---|
| 349 | */
|
---|
| 350 | /* Peripheral State functions ************************************************/
|
---|
| 351 | uint32_t HAL_FLASH_GetError(void);
|
---|
| 352 | HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
|
---|
| 353 | /**
|
---|
| 354 | * @}
|
---|
| 355 | */
|
---|
| 356 |
|
---|
| 357 | /**
|
---|
| 358 | * @}
|
---|
| 359 | */
|
---|
| 360 | /* Private types -------------------------------------------------------------*/
|
---|
| 361 | /* Private variables ---------------------------------------------------------*/
|
---|
| 362 | /** @defgroup FLASH_Private_Variables FLASH Private Variables
|
---|
| 363 | * @{
|
---|
| 364 | */
|
---|
| 365 |
|
---|
| 366 | /**
|
---|
| 367 | * @}
|
---|
| 368 | */
|
---|
| 369 | /* Private constants ---------------------------------------------------------*/
|
---|
| 370 | /** @defgroup FLASH_Private_Constants FLASH Private Constants
|
---|
| 371 | * @{
|
---|
| 372 | */
|
---|
| 373 |
|
---|
| 374 | /**
|
---|
| 375 | * @brief ACR register byte 0 (Bits[7:0]) base address
|
---|
| 376 | */
|
---|
| 377 | #define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
|
---|
| 378 | /**
|
---|
| 379 | * @brief OPTCR register byte 0 (Bits[7:0]) base address
|
---|
| 380 | */
|
---|
| 381 | #define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
|
---|
| 382 | /**
|
---|
| 383 | * @brief OPTCR register byte 1 (Bits[15:8]) base address
|
---|
| 384 | */
|
---|
| 385 | #define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
|
---|
| 386 | /**
|
---|
| 387 | * @brief OPTCR register byte 2 (Bits[23:16]) base address
|
---|
| 388 | */
|
---|
| 389 | #define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
|
---|
| 390 | /**
|
---|
| 391 | * @brief OPTCR register byte 3 (Bits[31:24]) base address
|
---|
| 392 | */
|
---|
| 393 | #define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
|
---|
| 394 |
|
---|
| 395 | /**
|
---|
| 396 | * @}
|
---|
| 397 | */
|
---|
| 398 |
|
---|
| 399 | /* Private macros ------------------------------------------------------------*/
|
---|
| 400 | /** @defgroup FLASH_Private_Macros FLASH Private Macros
|
---|
| 401 | * @{
|
---|
| 402 | */
|
---|
| 403 |
|
---|
| 404 | /** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
|
---|
| 405 | * @{
|
---|
| 406 | */
|
---|
| 407 | #define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
|
---|
| 408 | ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
|
---|
| 409 | ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
|
---|
| 410 | ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
|
---|
| 411 | /**
|
---|
| 412 | * @}
|
---|
| 413 | */
|
---|
| 414 |
|
---|
| 415 | /**
|
---|
| 416 | * @}
|
---|
| 417 | */
|
---|
| 418 |
|
---|
| 419 | /* Private functions ---------------------------------------------------------*/
|
---|
| 420 | /** @defgroup FLASH_Private_Functions FLASH Private Functions
|
---|
| 421 | * @{
|
---|
| 422 | */
|
---|
| 423 |
|
---|
| 424 | /**
|
---|
| 425 | * @}
|
---|
| 426 | */
|
---|
| 427 |
|
---|
| 428 | /**
|
---|
| 429 | * @}
|
---|
| 430 | */
|
---|
| 431 |
|
---|
| 432 | /**
|
---|
| 433 | * @}
|
---|
| 434 | */
|
---|
| 435 |
|
---|
| 436 | #ifdef __cplusplus
|
---|
| 437 | }
|
---|
| 438 | #endif
|
---|
| 439 |
|
---|
| 440 | #endif /* __STM32F4xx_HAL_FLASH_H */
|
---|
| 441 |
|
---|
| 442 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
---|