source: UsbWattMeter/trunk/lwip-1.4.1/src/netif/ppp/pap.c@ 167

Last change on this file since 167 was 167, checked in by coas-nagasima, 8 years ago

MIMEにSJISを設定

  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
  • Property svn:mime-type set to text/x-csrc; charset=SHIFT_JIS
File size: 15.7 KB
Line 
1/*****************************************************************************
2* pap.c - Network Password Authentication Protocol program file.
3*
4* Copyright (c) 2003 by Marc Boucher, Services Informatiques (MBSI) inc.
5* portions Copyright (c) 1997 by Global Election Systems Inc.
6*
7* The authors hereby grant permission to use, copy, modify, distribute,
8* and license this software and its documentation for any purpose, provided
9* that existing copyright notices are retained in all copies and that this
10* notice and the following disclaimer are included verbatim in any
11* distributions. No written agreement, license, or royalty fee is required
12* for any of the authorized uses.
13*
14* THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS *AS IS* AND ANY EXPRESS OR
15* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17* IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
18* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24*
25******************************************************************************
26* REVISION HISTORY
27*
28* 03-01-01 Marc Boucher <marc@mbsi.ca>
29* Ported to lwIP.
30* 97-12-12 Guy Lancaster <lancasterg@acm.org>, Global Election Systems Inc.
31* Original.
32*****************************************************************************/
33/*
34 * upap.c - User/Password Authentication Protocol.
35 *
36 * Copyright (c) 1989 Carnegie Mellon University.
37 * All rights reserved.
38 *
39 * Redistribution and use in source and binary forms are permitted
40 * provided that the above copyright notice and this paragraph are
41 * duplicated in all such forms and that any documentation,
42 * advertising materials, and other materials related to such
43 * distribution and use acknowledge that the software was developed
44 * by Carnegie Mellon University. The name of the
45 * University may not be used to endorse or promote products derived
46 * from this software without specific prior written permission.
47 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
48 * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
49 * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
50 */
51
52#include "lwip/opt.h"
53
54#if PPP_SUPPORT /* don't build if not configured for use in lwipopts.h */
55
56#if PAP_SUPPORT /* don't build if not configured for use in lwipopts.h */
57
58#include "ppp_impl.h"
59#include "pppdebug.h"
60
61#include "auth.h"
62#include "pap.h"
63
64#include <string.h>
65
66#if 0 /* UNUSED */
67static bool hide_password = 1;
68
69/*
70 * Command-line options.
71 */
72static option_t pap_option_list[] = {
73 { "hide-password", o_bool, &hide_password,
74 "Don't output passwords to log", 1 },
75 { "show-password", o_bool, &hide_password,
76 "Show password string in debug log messages", 0 },
77 { "pap-restart", o_int, &upap[0].us_timeouttime,
78 "Set retransmit timeout for PAP" },
79 { "pap-max-authreq", o_int, &upap[0].us_maxtransmits,
80 "Set max number of transmissions for auth-reqs" },
81 { "pap-timeout", o_int, &upap[0].us_reqtimeout,
82 "Set time limit for peer PAP authentication" },
83 { NULL }
84};
85#endif
86
87/*
88 * Protocol entry points.
89 */
90static void upap_init (int);
91static void upap_lowerup (int);
92static void upap_lowerdown (int);
93static void upap_input (int, u_char *, int);
94static void upap_protrej (int);
95#if PPP_ADDITIONAL_CALLBACKS
96static int upap_printpkt (u_char *, int, void (*)(void *, char *, ...), void *);
97#endif /* PPP_ADDITIONAL_CALLBACKS */
98
99struct protent pap_protent = {
100 PPP_PAP,
101 upap_init,
102 upap_input,
103 upap_protrej,
104 upap_lowerup,
105 upap_lowerdown,
106 NULL,
107 NULL,
108#if PPP_ADDITIONAL_CALLBACKS
109 upap_printpkt,
110 NULL,
111#endif /* PPP_ADDITIONAL_CALLBACKS */
112 1,
113 "PAP",
114#if PPP_ADDITIONAL_CALLBACKS
115 NULL,
116 NULL,
117 NULL
118#endif /* PPP_ADDITIONAL_CALLBACKS */
119};
120
121upap_state upap[NUM_PPP]; /* UPAP state; one for each unit */
122
123static void upap_timeout (void *);
124static void upap_reqtimeout(void *);
125static void upap_rauthreq (upap_state *, u_char *, u_char, int);
126static void upap_rauthack (upap_state *, u_char *, int, int);
127static void upap_rauthnak (upap_state *, u_char *, int, int);
128static void upap_sauthreq (upap_state *);
129static void upap_sresp (upap_state *, u_char, u_char, char *, int);
130
131
132/*
133 * upap_init - Initialize a UPAP unit.
134 */
135static void
136upap_init(int unit)
137{
138 upap_state *u = &upap[unit];
139
140 UPAPDEBUG(LOG_INFO, ("upap_init: %d\n", unit));
141 u->us_unit = unit;
142 u->us_user = NULL;
143 u->us_userlen = 0;
144 u->us_passwd = NULL;
145 u->us_passwdlen = 0;
146 u->us_clientstate = UPAPCS_INITIAL;
147 u->us_serverstate = UPAPSS_INITIAL;
148 u->us_id = 0;
149 u->us_timeouttime = UPAP_DEFTIMEOUT;
150 u->us_maxtransmits = 10;
151 u->us_reqtimeout = UPAP_DEFREQTIME;
152}
153
154/*
155 * upap_authwithpeer - Authenticate us with our peer (start client).
156 *
157 * Set new state and send authenticate's.
158 */
159void
160upap_authwithpeer(int unit, char *user, char *password)
161{
162 upap_state *u = &upap[unit];
163
164 UPAPDEBUG(LOG_INFO, ("upap_authwithpeer: %d user=%s password=%s s=%d\n",
165 unit, user, password, u->us_clientstate));
166
167 /* Save the username and password we're given */
168 u->us_user = user;
169 u->us_userlen = (int)strlen(user);
170 u->us_passwd = password;
171 u->us_passwdlen = (int)strlen(password);
172
173 u->us_transmits = 0;
174
175 /* Lower layer up yet? */
176 if (u->us_clientstate == UPAPCS_INITIAL ||
177 u->us_clientstate == UPAPCS_PENDING) {
178 u->us_clientstate = UPAPCS_PENDING;
179 return;
180 }
181
182 upap_sauthreq(u); /* Start protocol */
183}
184
185
186/*
187 * upap_authpeer - Authenticate our peer (start server).
188 *
189 * Set new state.
190 */
191void
192upap_authpeer(int unit)
193{
194 upap_state *u = &upap[unit];
195
196 /* Lower layer up yet? */
197 if (u->us_serverstate == UPAPSS_INITIAL ||
198 u->us_serverstate == UPAPSS_PENDING) {
199 u->us_serverstate = UPAPSS_PENDING;
200 return;
201 }
202
203 u->us_serverstate = UPAPSS_LISTEN;
204 if (u->us_reqtimeout > 0) {
205 TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
206 }
207}
208
209/*
210 * upap_timeout - Retransmission timer for sending auth-reqs expired.
211 */
212static void
213upap_timeout(void *arg)
214{
215 upap_state *u = (upap_state *) arg;
216
217 UPAPDEBUG(LOG_INFO, ("upap_timeout: %d timeout %d expired s=%d\n",
218 u->us_unit, u->us_timeouttime, u->us_clientstate));
219
220 if (u->us_clientstate != UPAPCS_AUTHREQ) {
221 UPAPDEBUG(LOG_INFO, ("upap_timeout: not in AUTHREQ state!\n"));
222 return;
223 }
224
225 if (u->us_transmits >= u->us_maxtransmits) {
226 /* give up in disgust */
227 UPAPDEBUG(LOG_ERR, ("No response to PAP authenticate-requests\n"));
228 u->us_clientstate = UPAPCS_BADAUTH;
229 auth_withpeer_fail(u->us_unit, PPP_PAP);
230 return;
231 }
232
233 upap_sauthreq(u); /* Send Authenticate-Request and set upap timeout*/
234}
235
236
237/*
238 * upap_reqtimeout - Give up waiting for the peer to send an auth-req.
239 */
240static void
241upap_reqtimeout(void *arg)
242{
243 upap_state *u = (upap_state *) arg;
244
245 if (u->us_serverstate != UPAPSS_LISTEN) {
246 return; /* huh?? */
247 }
248
249 auth_peer_fail(u->us_unit, PPP_PAP);
250 u->us_serverstate = UPAPSS_BADAUTH;
251}
252
253
254/*
255 * upap_lowerup - The lower layer is up.
256 *
257 * Start authenticating if pending.
258 */
259static void
260upap_lowerup(int unit)
261{
262 upap_state *u = &upap[unit];
263
264 UPAPDEBUG(LOG_INFO, ("upap_lowerup: init %d clientstate s=%d\n", unit, u->us_clientstate));
265
266 if (u->us_clientstate == UPAPCS_INITIAL) {
267 u->us_clientstate = UPAPCS_CLOSED;
268 } else if (u->us_clientstate == UPAPCS_PENDING) {
269 upap_sauthreq(u); /* send an auth-request */
270 /* now client state is UPAPCS__AUTHREQ */
271 }
272
273 if (u->us_serverstate == UPAPSS_INITIAL) {
274 u->us_serverstate = UPAPSS_CLOSED;
275 } else if (u->us_serverstate == UPAPSS_PENDING) {
276 u->us_serverstate = UPAPSS_LISTEN;
277 if (u->us_reqtimeout > 0) {
278 TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
279 }
280 }
281}
282
283
284/*
285 * upap_lowerdown - The lower layer is down.
286 *
287 * Cancel all timeouts.
288 */
289static void
290upap_lowerdown(int unit)
291{
292 upap_state *u = &upap[unit];
293
294 UPAPDEBUG(LOG_INFO, ("upap_lowerdown: %d s=%d\n", unit, u->us_clientstate));
295
296 if (u->us_clientstate == UPAPCS_AUTHREQ) { /* Timeout pending? */
297 UNTIMEOUT(upap_timeout, u); /* Cancel timeout */
298 }
299 if (u->us_serverstate == UPAPSS_LISTEN && u->us_reqtimeout > 0) {
300 UNTIMEOUT(upap_reqtimeout, u);
301 }
302
303 u->us_clientstate = UPAPCS_INITIAL;
304 u->us_serverstate = UPAPSS_INITIAL;
305}
306
307
308/*
309 * upap_protrej - Peer doesn't speak this protocol.
310 *
311 * This shouldn't happen. In any case, pretend lower layer went down.
312 */
313static void
314upap_protrej(int unit)
315{
316 upap_state *u = &upap[unit];
317
318 if (u->us_clientstate == UPAPCS_AUTHREQ) {
319 UPAPDEBUG(LOG_ERR, ("PAP authentication failed due to protocol-reject\n"));
320 auth_withpeer_fail(unit, PPP_PAP);
321 }
322 if (u->us_serverstate == UPAPSS_LISTEN) {
323 UPAPDEBUG(LOG_ERR, ("PAP authentication of peer failed (protocol-reject)\n"));
324 auth_peer_fail(unit, PPP_PAP);
325 }
326 upap_lowerdown(unit);
327}
328
329
330/*
331 * upap_input - Input UPAP packet.
332 */
333static void
334upap_input(int unit, u_char *inpacket, int l)
335{
336 upap_state *u = &upap[unit];
337 u_char *inp;
338 u_char code, id;
339 int len;
340
341 /*
342 * Parse header (code, id and length).
343 * If packet too short, drop it.
344 */
345 inp = inpacket;
346 if (l < (int)UPAP_HEADERLEN) {
347 UPAPDEBUG(LOG_INFO, ("pap_input: rcvd short header.\n"));
348 return;
349 }
350 GETCHAR(code, inp);
351 GETCHAR(id, inp);
352 GETSHORT(len, inp);
353 if (len < (int)UPAP_HEADERLEN) {
354 UPAPDEBUG(LOG_INFO, ("pap_input: rcvd illegal length.\n"));
355 return;
356 }
357 if (len > l) {
358 UPAPDEBUG(LOG_INFO, ("pap_input: rcvd short packet.\n"));
359 return;
360 }
361 len -= UPAP_HEADERLEN;
362
363 /*
364 * Action depends on code.
365 */
366 switch (code) {
367 case UPAP_AUTHREQ:
368 upap_rauthreq(u, inp, id, len);
369 break;
370
371 case UPAP_AUTHACK:
372 upap_rauthack(u, inp, id, len);
373 break;
374
375 case UPAP_AUTHNAK:
376 upap_rauthnak(u, inp, id, len);
377 break;
378
379 default: /* XXX Need code reject */
380 UPAPDEBUG(LOG_INFO, ("pap_input: UNHANDLED default: code: %d, id: %d, len: %d.\n", code, id, len));
381 break;
382 }
383}
384
385
386/*
387 * upap_rauth - Receive Authenticate.
388 */
389static void
390upap_rauthreq(upap_state *u, u_char *inp, u_char id, int len)
391{
392 u_char ruserlen, rpasswdlen;
393 char *ruser, *rpasswd;
394 u_char retcode;
395 char *msg;
396 int msglen;
397
398 UPAPDEBUG(LOG_INFO, ("pap_rauth: Rcvd id %d.\n", id));
399
400 if (u->us_serverstate < UPAPSS_LISTEN) {
401 return;
402 }
403
404 /*
405 * If we receive a duplicate authenticate-request, we are
406 * supposed to return the same status as for the first request.
407 */
408 if (u->us_serverstate == UPAPSS_OPEN) {
409 upap_sresp(u, UPAP_AUTHACK, id, "", 0); /* return auth-ack */
410 return;
411 }
412 if (u->us_serverstate == UPAPSS_BADAUTH) {
413 upap_sresp(u, UPAP_AUTHNAK, id, "", 0); /* return auth-nak */
414 return;
415 }
416
417 /*
418 * Parse user/passwd.
419 */
420 if (len < (int)sizeof (u_char)) {
421 UPAPDEBUG(LOG_INFO, ("pap_rauth: rcvd short packet.\n"));
422 return;
423 }
424 GETCHAR(ruserlen, inp);
425 len -= sizeof (u_char) + ruserlen + sizeof (u_char);
426 if (len < 0) {
427 UPAPDEBUG(LOG_INFO, ("pap_rauth: rcvd short packet.\n"));
428 return;
429 }
430 ruser = (char *) inp;
431 INCPTR(ruserlen, inp);
432 GETCHAR(rpasswdlen, inp);
433 if (len < rpasswdlen) {
434 UPAPDEBUG(LOG_INFO, ("pap_rauth: rcvd short packet.\n"));
435 return;
436 }
437 rpasswd = (char *) inp;
438
439 /*
440 * Check the username and password given.
441 */
442 retcode = check_passwd(u->us_unit, ruser, ruserlen, rpasswd, rpasswdlen, &msg, &msglen);
443 /* lwip: currently retcode is always UPAP_AUTHACK */
444 BZERO(rpasswd, rpasswdlen);
445
446 upap_sresp(u, retcode, id, msg, msglen);
447
448 if (retcode == UPAP_AUTHACK) {
449 u->us_serverstate = UPAPSS_OPEN;
450 auth_peer_success(u->us_unit, PPP_PAP, ruser, ruserlen);
451 } else {
452 u->us_serverstate = UPAPSS_BADAUTH;
453 auth_peer_fail(u->us_unit, PPP_PAP);
454 }
455
456 if (u->us_reqtimeout > 0) {
457 UNTIMEOUT(upap_reqtimeout, u);
458 }
459}
460
461
462/*
463 * upap_rauthack - Receive Authenticate-Ack.
464 */
465static void
466upap_rauthack(upap_state *u, u_char *inp, int id, int len)
467{
468 u_char msglen;
469 char *msg;
470
471 LWIP_UNUSED_ARG(id);
472
473 UPAPDEBUG(LOG_INFO, ("pap_rauthack: Rcvd id %d s=%d\n", id, u->us_clientstate));
474
475 if (u->us_clientstate != UPAPCS_AUTHREQ) { /* XXX */
476 UPAPDEBUG(LOG_INFO, ("pap_rauthack: us_clientstate != UPAPCS_AUTHREQ\n"));
477 return;
478 }
479
480 /*
481 * Parse message.
482 */
483 if (len < (int)sizeof (u_char)) {
484 UPAPDEBUG(LOG_INFO, ("pap_rauthack: ignoring missing msg-length.\n"));
485 } else {
486 GETCHAR(msglen, inp);
487 if (msglen > 0) {
488 len -= sizeof (u_char);
489 if (len < msglen) {
490 UPAPDEBUG(LOG_INFO, ("pap_rauthack: rcvd short packet.\n"));
491 return;
492 }
493 msg = (char *) inp;
494 PRINTMSG(msg, msglen);
495 }
496 }
497 UNTIMEOUT(upap_timeout, u); /* Cancel timeout */
498 u->us_clientstate = UPAPCS_OPEN;
499
500 auth_withpeer_success(u->us_unit, PPP_PAP);
501}
502
503
504/*
505 * upap_rauthnak - Receive Authenticate-Nak.
506 */
507static void
508upap_rauthnak(upap_state *u, u_char *inp, int id, int len)
509{
510 u_char msglen;
511 char *msg;
512
513 LWIP_UNUSED_ARG(id);
514
515 UPAPDEBUG(LOG_INFO, ("pap_rauthnak: Rcvd id %d s=%d\n", id, u->us_clientstate));
516
517 if (u->us_clientstate != UPAPCS_AUTHREQ) { /* XXX */
518 return;
519 }
520
521 /*
522 * Parse message.
523 */
524 if (len < sizeof (u_char)) {
525 UPAPDEBUG(LOG_INFO, ("pap_rauthnak: ignoring missing msg-length.\n"));
526 } else {
527 GETCHAR(msglen, inp);
528 if(msglen > 0) {
529 len -= sizeof (u_char);
530 if (len < msglen) {
531 UPAPDEBUG(LOG_INFO, ("pap_rauthnak: rcvd short packet.\n"));
532 return;
533 }
534 msg = (char *) inp;
535 PRINTMSG(msg, msglen);
536 }
537 }
538
539 u->us_clientstate = UPAPCS_BADAUTH;
540
541 UPAPDEBUG(LOG_ERR, ("PAP authentication failed\n"));
542 auth_withpeer_fail(u->us_unit, PPP_PAP);
543}
544
545
546/*
547 * upap_sauthreq - Send an Authenticate-Request.
548 */
549static void
550upap_sauthreq(upap_state *u)
551{
552 u_char *outp;
553 int outlen;
554
555 outlen = UPAP_HEADERLEN + 2 * sizeof (u_char)
556 + u->us_userlen + u->us_passwdlen;
557 outp = outpacket_buf[u->us_unit];
558
559 MAKEHEADER(outp, PPP_PAP);
560
561 PUTCHAR(UPAP_AUTHREQ, outp);
562 PUTCHAR(++u->us_id, outp);
563 PUTSHORT(outlen, outp);
564 PUTCHAR(u->us_userlen, outp);
565 BCOPY(u->us_user, outp, u->us_userlen);
566 INCPTR(u->us_userlen, outp);
567 PUTCHAR(u->us_passwdlen, outp);
568 BCOPY(u->us_passwd, outp, u->us_passwdlen);
569
570 pppWrite(u->us_unit, outpacket_buf[u->us_unit], outlen + PPP_HDRLEN);
571
572 UPAPDEBUG(LOG_INFO, ("pap_sauth: Sent id %d\n", u->us_id));
573
574 TIMEOUT(upap_timeout, u, u->us_timeouttime);
575 ++u->us_transmits;
576 u->us_clientstate = UPAPCS_AUTHREQ;
577}
578
579
580/*
581 * upap_sresp - Send a response (ack or nak).
582 */
583static void
584upap_sresp(upap_state *u, u_char code, u_char id, char *msg, int msglen)
585{
586 u_char *outp;
587 int outlen;
588
589 outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen;
590 outp = outpacket_buf[u->us_unit];
591 MAKEHEADER(outp, PPP_PAP);
592
593 PUTCHAR(code, outp);
594 PUTCHAR(id, outp);
595 PUTSHORT(outlen, outp);
596 PUTCHAR(msglen, outp);
597 BCOPY(msg, outp, msglen);
598 pppWrite(u->us_unit, outpacket_buf[u->us_unit], outlen + PPP_HDRLEN);
599
600 UPAPDEBUG(LOG_INFO, ("pap_sresp: Sent code %d, id %d s=%d\n", code, id, u->us_clientstate));
601}
602
603#if PPP_ADDITIONAL_CALLBACKS
604static char *upap_codenames[] = {
605 "AuthReq", "AuthAck", "AuthNak"
606};
607
608/*
609 * upap_printpkt - print the contents of a PAP packet.
610 */
611static int upap_printpkt(
612 u_char *p,
613 int plen,
614 void (*printer) (void *, char *, ...),
615 void *arg
616)
617{
618 LWIP_UNUSED_ARG(p);
619 LWIP_UNUSED_ARG(plen);
620 LWIP_UNUSED_ARG(printer);
621 LWIP_UNUSED_ARG(arg);
622 return 0;
623}
624#endif /* PPP_ADDITIONAL_CALLBACKS */
625
626#endif /* PAP_SUPPORT */
627
628#endif /* PPP_SUPPORT */
Note: See TracBrowser for help on using the repository browser.