/* This source code was modified by Martin Hedenfalk for * use in Curl. His latest changes were done 2000-09-18. * * It has since been patched and modified a lot by Daniel Stenberg * to make it better applied to curl conditions, and to make * it not use globals, pollute name space and more. This source code awaits a * rewrite to work around the paragraph 2 in the BSD licenses as explained * below. * * Copyright (c) 1998, 1999 Kungliga Tekniska Högskolan * (Royal Institute of Technology, Stockholm, Sweden). * * Copyright (C) 2001 - 2015, Daniel Stenberg, , et al. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * 3. Neither the name of the Institute nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "curl_setup.h" #ifndef CURL_DISABLE_FTP #ifdef HAVE_GSSAPI #ifdef HAVE_NETDB_H #include #endif #ifdef HAVE_LIMITS_H #include #endif #include "urldata.h" #include "curl_base64.h" #include "curl_memory.h" #include "curl_sec.h" #include "ftp.h" #include "sendf.h" #include "rawstr.h" #include "warnless.h" /* The last #include file should be: */ #include "memdebug.h" static const struct { enum protection_level level; const char *name; } level_names[] = { { PROT_CLEAR, "clear" }, { PROT_SAFE, "safe" }, { PROT_CONFIDENTIAL, "confidential" }, { PROT_PRIVATE, "private" } }; static enum protection_level name_to_level(const char *name) { int i; for(i = 0; i < (int)sizeof(level_names)/(int)sizeof(level_names[0]); i++) if(checkprefix(name, level_names[i].name)) return level_names[i].level; return PROT_NONE; } /* Convert a protocol |level| to its char representation. We take an int to catch programming mistakes. */ static char level_to_char(int level) { switch(level) { case PROT_CLEAR: return 'C'; case PROT_SAFE: return 'S'; case PROT_CONFIDENTIAL: return 'E'; case PROT_PRIVATE: return 'P'; case PROT_CMD: /* Fall through */ default: /* Those 2 cases should not be reached! */ break; } DEBUGASSERT(0); /* Default to the most secure alternative. */ return 'P'; } /* Send an FTP command defined by |message| and the optional arguments. The function returns the ftp_code. If an error occurs, -1 is returned. */ static int ftp_send_command(struct connectdata *conn, const char *message, ...) { int ftp_code; ssize_t nread=0; va_list args; char print_buffer[50]; va_start(args, message); vsnprintf(print_buffer, sizeof(print_buffer), message, args); va_end(args); if(Curl_ftpsendf(conn, print_buffer)) { ftp_code = -1; } else { if(Curl_GetFTPResponse(&nread, conn, &ftp_code)) ftp_code = -1; } (void)nread; /* Unused */ return ftp_code; } /* Read |len| from the socket |fd| and store it in |to|. Return a CURLcode saying whether an error occurred or CURLE_OK if |len| was read. */ static CURLcode socket_read(curl_socket_t fd, void *to, size_t len) { char *to_p = to; CURLcode result; ssize_t nread; while(len > 0) { result = Curl_read_plain(fd, to_p, len, &nread); if(!result) { len -= nread; to_p += nread; } else { /* FIXME: We are doing a busy wait */ if(result == CURLE_AGAIN) continue; return result; } } return CURLE_OK; } /* Write |len| bytes from the buffer |to| to the socket |fd|. Return a CURLcode saying whether an error occurred or CURLE_OK if |len| was written. */ static CURLcode socket_write(struct connectdata *conn, curl_socket_t fd, const void *to, size_t len) { const char *to_p = to; CURLcode result; ssize_t written; while(len > 0) { result = Curl_write_plain(conn, fd, to_p, len, &written); if(!result) { len -= written; to_p += written; } else { /* FIXME: We are doing a busy wait */ if(result == CURLE_AGAIN) continue; return result; } } return CURLE_OK; } static CURLcode read_data(struct connectdata *conn, curl_socket_t fd, struct krb5buffer *buf) { int len; void* tmp; CURLcode result; result = socket_read(fd, &len, sizeof(len)); if(result) return result; len = ntohl(len); tmp = realloc(buf->data, len); if(tmp == NULL) return CURLE_OUT_OF_MEMORY; buf->data = tmp; result = socket_read(fd, buf->data, len); if(result) return result; buf->size = conn->mech->decode(conn->app_data, buf->data, len, conn->data_prot, conn); buf->index = 0; return CURLE_OK; } static size_t buffer_read(struct krb5buffer *buf, void *data, size_t len) { if(buf->size - buf->index < len) len = buf->size - buf->index; memcpy(data, (char*)buf->data + buf->index, len); buf->index += len; return len; } /* Matches Curl_recv signature */ static ssize_t sec_recv(struct connectdata *conn, int sockindex, char *buffer, size_t len, CURLcode *err) { size_t bytes_read; size_t total_read = 0; curl_socket_t fd = conn->sock[sockindex]; *err = CURLE_OK; /* Handle clear text response. */ if(conn->sec_complete == 0 || conn->data_prot == PROT_CLEAR) return read(fd, buffer, len); if(conn->in_buffer.eof_flag) { conn->in_buffer.eof_flag = 0; return 0; } bytes_read = buffer_read(&conn->in_buffer, buffer, len); len -= bytes_read; total_read += bytes_read; buffer += bytes_read; while(len > 0) { if(read_data(conn, fd, &conn->in_buffer)) return -1; if(conn->in_buffer.size == 0) { if(bytes_read > 0) conn->in_buffer.eof_flag = 1; return bytes_read; } bytes_read = buffer_read(&conn->in_buffer, buffer, len); len -= bytes_read; total_read += bytes_read; buffer += bytes_read; } /* FIXME: Check for overflow */ return total_read; } /* Send |length| bytes from |from| to the |fd| socket taking care of encoding and negociating with the server. |from| can be NULL. */ /* FIXME: We don't check for errors nor report any! */ static void do_sec_send(struct connectdata *conn, curl_socket_t fd, const char *from, int length) { int bytes, htonl_bytes; /* 32-bit integers for htonl */ char *buffer = NULL; char *cmd_buffer; size_t cmd_size = 0; CURLcode error; enum protection_level prot_level = conn->data_prot; bool iscmd = (prot_level == PROT_CMD)?TRUE:FALSE; DEBUGASSERT(prot_level > PROT_NONE && prot_level < PROT_LAST); if(iscmd) { if(!strncmp(from, "PASS ", 5) || !strncmp(from, "ACCT ", 5)) prot_level = PROT_PRIVATE; else prot_level = conn->command_prot; } bytes = conn->mech->encode(conn->app_data, from, length, prot_level, (void**)&buffer); if(!buffer || bytes <= 0) return; /* error */ if(iscmd) { error = Curl_base64_encode(conn->data, buffer, curlx_sitouz(bytes), &cmd_buffer, &cmd_size); if(error) { free(buffer); return; /* error */ } if(cmd_size > 0) { static const char *enc = "ENC "; static const char *mic = "MIC "; if(prot_level == PROT_PRIVATE) socket_write(conn, fd, enc, 4); else socket_write(conn, fd, mic, 4); socket_write(conn, fd, cmd_buffer, cmd_size); socket_write(conn, fd, "\r\n", 2); infof(conn->data, "Send: %s%s\n", prot_level == PROT_PRIVATE?enc:mic, cmd_buffer); free(cmd_buffer); } } else { htonl_bytes = htonl(bytes); socket_write(conn, fd, &htonl_bytes, sizeof(htonl_bytes)); socket_write(conn, fd, buffer, curlx_sitouz(bytes)); } free(buffer); } static ssize_t sec_write(struct connectdata *conn, curl_socket_t fd, const char *buffer, size_t length) { ssize_t tx = 0, len = conn->buffer_size; len -= conn->mech->overhead(conn->app_data, conn->data_prot, curlx_sztosi(len)); if(len <= 0) len = length; while(length) { if(length < (size_t)len) len = length; do_sec_send(conn, fd, buffer, curlx_sztosi(len)); length -= len; buffer += len; tx += len; } return tx; } /* Matches Curl_send signature */ static ssize_t sec_send(struct connectdata *conn, int sockindex, const void *buffer, size_t len, CURLcode *err) { curl_socket_t fd = conn->sock[sockindex]; *err = CURLE_OK; return sec_write(conn, fd, buffer, len); } int Curl_sec_read_msg(struct connectdata *conn, char *buffer, enum protection_level level) { /* decoded_len should be size_t or ssize_t but conn->mech->decode returns an int */ int decoded_len; char *buf; int ret_code = 0; size_t decoded_sz = 0; CURLcode error; DEBUGASSERT(level > PROT_NONE && level < PROT_LAST); error = Curl_base64_decode(buffer + 4, (unsigned char **)&buf, &decoded_sz); if(error || decoded_sz == 0) return -1; if(decoded_sz > (size_t)INT_MAX) { free(buf); return -1; } decoded_len = curlx_uztosi(decoded_sz); decoded_len = conn->mech->decode(conn->app_data, buf, decoded_len, level, conn); if(decoded_len <= 0) { free(buf); return -1; } if(conn->data->set.verbose) { buf[decoded_len] = '\n'; Curl_debug(conn->data, CURLINFO_HEADER_IN, buf, decoded_len + 1, conn); } buf[decoded_len] = '\0'; if(decoded_len <= 3) /* suspiciously short */ return 0; if(buf[3] != '-') /* safe to ignore return code */ (void)sscanf(buf, "%d", &ret_code); if(buf[decoded_len - 1] == '\n') buf[decoded_len - 1] = '\0'; /* FIXME: Is |buffer| length always greater than |decoded_len|? */ strcpy(buffer, buf); free(buf); return ret_code; } /* FIXME: The error code returned here is never checked. */ static int sec_set_protection_level(struct connectdata *conn) { int code; char* pbsz; static unsigned int buffer_size = 1 << 20; /* 1048576 */ enum protection_level level = conn->request_data_prot; DEBUGASSERT(level > PROT_NONE && level < PROT_LAST); if(!conn->sec_complete) { infof(conn->data, "Trying to change the protection level after the" "completion of the data exchange.\n"); return -1; } /* Bail out if we try to set up the same level */ if(conn->data_prot == level) return 0; if(level) { code = ftp_send_command(conn, "PBSZ %u", buffer_size); if(code < 0) return -1; if(code/100 != 2) { failf(conn->data, "Failed to set the protection's buffer size."); return -1; } conn->buffer_size = buffer_size; pbsz = strstr(conn->data->state.buffer, "PBSZ="); if(pbsz) { /* ignore return code, use default value if it fails */ (void)sscanf(pbsz, "PBSZ=%u", &buffer_size); if(buffer_size < conn->buffer_size) conn->buffer_size = buffer_size; } } /* Now try to negiociate the protection level. */ code = ftp_send_command(conn, "PROT %c", level_to_char(level)); if(code < 0) return -1; if(code/100 != 2) { failf(conn->data, "Failed to set the protection level."); return -1; } conn->data_prot = level; if(level == PROT_PRIVATE) conn->command_prot = level; return 0; } int Curl_sec_request_prot(struct connectdata *conn, const char *level) { enum protection_level l = name_to_level(level); if(l == PROT_NONE) return -1; DEBUGASSERT(l > PROT_NONE && l < PROT_LAST); conn->request_data_prot = l; return 0; } static CURLcode choose_mech(struct connectdata *conn) { int ret; struct SessionHandle *data = conn->data; void *tmp_allocation; const struct Curl_sec_client_mech *mech = &Curl_krb5_client_mech; tmp_allocation = realloc(conn->app_data, mech->size); if(tmp_allocation == NULL) { failf(data, "Failed realloc of size %u", mech->size); mech = NULL; return CURLE_OUT_OF_MEMORY; } conn->app_data = tmp_allocation; if(mech->init) { ret = mech->init(conn->app_data); if(ret) { infof(data, "Failed initialization for %s. Skipping it.\n", mech->name); return CURLE_FAILED_INIT; } } infof(data, "Trying mechanism %s...\n", mech->name); ret = ftp_send_command(conn, "AUTH %s", mech->name); if(ret < 0) /* FIXME: This error is too generic but it is OK for now. */ return CURLE_COULDNT_CONNECT; if(ret/100 != 3) { switch(ret) { case 504: infof(data, "Mechanism %s is not supported by the server (server " "returned ftp code: 504).\n", mech->name); break; case 534: infof(data, "Mechanism %s was rejected by the server (server returned " "ftp code: 534).\n", mech->name); break; default: if(ret/100 == 5) { infof(data, "server does not support the security extensions\n"); return CURLE_USE_SSL_FAILED; } break; } return CURLE_LOGIN_DENIED; } /* Authenticate */ ret = mech->auth(conn->app_data, conn); if(ret != AUTH_CONTINUE) { if(ret != AUTH_OK) { /* Mechanism has dumped the error to stderr, don't error here. */ return -1; } DEBUGASSERT(ret == AUTH_OK); conn->mech = mech; conn->sec_complete = 1; conn->recv[FIRSTSOCKET] = sec_recv; conn->send[FIRSTSOCKET] = sec_send; conn->recv[SECONDARYSOCKET] = sec_recv; conn->send[SECONDARYSOCKET] = sec_send; conn->command_prot = PROT_SAFE; /* Set the requested protection level */ /* BLOCKING */ (void)sec_set_protection_level(conn); } return CURLE_OK; } CURLcode Curl_sec_login(struct connectdata *conn) { return choose_mech(conn); } void Curl_sec_end(struct connectdata *conn) { if(conn->mech != NULL && conn->mech->end) conn->mech->end(conn->app_data); free(conn->app_data); conn->app_data = NULL; if(conn->in_buffer.data) { free(conn->in_buffer.data); conn->in_buffer.data = NULL; conn->in_buffer.size = 0; conn->in_buffer.index = 0; /* FIXME: Is this really needed? */ conn->in_buffer.eof_flag = 0; } conn->sec_complete = 0; conn->data_prot = PROT_CLEAR; conn->mech = NULL; } #endif /* HAVE_GSSAPI */ #endif /* CURL_DISABLE_FTP */