[445] | 1 | /*---------------------------------------------------------------------------/
|
---|
| 2 | / FatFs - FAT file system module configuration file R0.11a (C)ChaN, 2015
|
---|
| 3 | /---------------------------------------------------------------------------*/
|
---|
| 4 |
|
---|
| 5 | #define _FFCONF 64180 /* Revision ID */
|
---|
| 6 |
|
---|
| 7 | /*---------------------------------------------------------------------------/
|
---|
| 8 | / Function Configurations
|
---|
| 9 | /---------------------------------------------------------------------------*/
|
---|
| 10 |
|
---|
| 11 | #define _FS_READONLY 0
|
---|
| 12 | /* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
|
---|
| 13 | / Read-only configuration removes writing API functions, f_write(), f_sync(),
|
---|
| 14 | / f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
|
---|
| 15 | / and optional writing functions as well. */
|
---|
| 16 |
|
---|
| 17 |
|
---|
| 18 | #define _FS_MINIMIZE 0
|
---|
| 19 | /* This option defines minimization level to remove some basic API functions.
|
---|
| 20 | /
|
---|
| 21 | / 0: All basic functions are enabled.
|
---|
| 22 | / 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
|
---|
| 23 | / f_truncate() and f_rename() function are removed.
|
---|
| 24 | / 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
|
---|
| 25 | / 3: f_lseek() function is removed in addition to 2. */
|
---|
| 26 |
|
---|
| 27 |
|
---|
| 28 | #define _USE_STRFUNC 2
|
---|
| 29 | /* This option switches string functions, f_gets(), f_putc(), f_puts() and
|
---|
| 30 | / f_printf().
|
---|
| 31 | /
|
---|
| 32 | / 0: Disable string functions.
|
---|
| 33 | / 1: Enable without LF-CRLF conversion.
|
---|
| 34 | / 2: Enable with LF-CRLF conversion. */
|
---|
| 35 |
|
---|
| 36 |
|
---|
| 37 | #define _USE_FIND 1
|
---|
| 38 | /* This option switches filtered directory read feature and related functions,
|
---|
| 39 | / f_findfirst() and f_findnext(). (0:Disable or 1:Enable) */
|
---|
| 40 |
|
---|
| 41 |
|
---|
| 42 | #define _USE_MKFS 1
|
---|
| 43 | /* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
|
---|
| 44 |
|
---|
| 45 |
|
---|
| 46 | #define _USE_FASTSEEK 0
|
---|
| 47 | /* This option switches fast seek feature. (0:Disable or 1:Enable) */
|
---|
| 48 |
|
---|
| 49 |
|
---|
| 50 | #define _USE_LABEL 1
|
---|
| 51 | /* This option switches volume label functions, f_getlabel() and f_setlabel().
|
---|
| 52 | / (0:Disable or 1:Enable) */
|
---|
| 53 |
|
---|
| 54 |
|
---|
| 55 | #define _USE_FORWARD 1
|
---|
| 56 | /* This option switches f_forward() function. (0:Disable or 1:Enable)
|
---|
| 57 | / To enable it, also _FS_TINY need to be set to 1. */
|
---|
| 58 |
|
---|
| 59 |
|
---|
| 60 | /*---------------------------------------------------------------------------/
|
---|
| 61 | / Locale and Namespace Configurations
|
---|
| 62 | /---------------------------------------------------------------------------*/
|
---|
| 63 |
|
---|
| 64 | #define _CODE_PAGE 65001
|
---|
| 65 | /* This option specifies the OEM code page to be used on the target system.
|
---|
| 66 | / Incorrect setting of the code page can cause a file open failure.
|
---|
| 67 | /
|
---|
| 68 | / 1 - ASCII (No extended character. Non-LFN cfg. only)
|
---|
| 69 | / 437 - U.S.
|
---|
| 70 | / 720 - Arabic
|
---|
| 71 | / 737 - Greek
|
---|
| 72 | / 771 - KBL
|
---|
| 73 | / 775 - Baltic
|
---|
| 74 | / 850 - Latin 1
|
---|
| 75 | / 852 - Latin 2
|
---|
| 76 | / 855 - Cyrillic
|
---|
| 77 | / 857 - Turkish
|
---|
| 78 | / 860 - Portuguese
|
---|
| 79 | / 861 - Icelandic
|
---|
| 80 | / 862 - Hebrew
|
---|
| 81 | / 863 - Canadian French
|
---|
| 82 | / 864 - Arabic
|
---|
| 83 | / 865 - Nordic
|
---|
| 84 | / 866 - Russian
|
---|
| 85 | / 869 - Greek 2
|
---|
| 86 | / 932 - Japanese (DBCS)
|
---|
| 87 | / 936 - Simplified Chinese (DBCS)
|
---|
| 88 | / 949 - Korean (DBCS)
|
---|
| 89 | / 950 - Traditional Chinese (DBCS)
|
---|
| 90 | */
|
---|
| 91 |
|
---|
| 92 |
|
---|
| 93 | #define _USE_LFN 2
|
---|
| 94 | #define _MAX_LFN 255
|
---|
| 95 | /* The _USE_LFN option switches the LFN feature.
|
---|
| 96 | /
|
---|
| 97 | / 0: Disable LFN feature. _MAX_LFN has no effect.
|
---|
| 98 | / 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
|
---|
| 99 | / 2: Enable LFN with dynamic working buffer on the STACK.
|
---|
| 100 | / 3: Enable LFN with dynamic working buffer on the HEAP.
|
---|
| 101 | /
|
---|
| 102 | / When enable the LFN feature, Unicode handling functions (option/unicode.c) must
|
---|
| 103 | / be added to the project. The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes.
|
---|
| 104 | / When use stack for the working buffer, take care on stack overflow. When use heap
|
---|
| 105 | / memory for the working buffer, memory management functions, ff_memalloc() and
|
---|
| 106 | / ff_memfree(), must be added to the project. */
|
---|
| 107 |
|
---|
| 108 |
|
---|
| 109 | #define _LFN_UNICODE 0
|
---|
| 110 | /* This option switches character encoding on the API. (0:ANSI/OEM or 1:Unicode)
|
---|
| 111 | / To use Unicode string for the path name, enable LFN feature and set _LFN_UNICODE
|
---|
| 112 | / to 1. This option also affects behavior of string I/O functions. */
|
---|
| 113 |
|
---|
| 114 |
|
---|
| 115 | #define _STRF_ENCODE 3
|
---|
| 116 | /* When _LFN_UNICODE is 1, this option selects the character encoding on the file to
|
---|
| 117 | / be read/written via string I/O functions, f_gets(), f_putc(), f_puts and f_printf().
|
---|
| 118 | /
|
---|
| 119 | / 0: ANSI/OEM
|
---|
| 120 | / 1: UTF-16LE
|
---|
| 121 | / 2: UTF-16BE
|
---|
| 122 | / 3: UTF-8
|
---|
| 123 | /
|
---|
| 124 | / When _LFN_UNICODE is 0, this option has no effect. */
|
---|
| 125 |
|
---|
| 126 |
|
---|
| 127 | #define _FS_RPATH 2
|
---|
| 128 | /* This option configures relative path feature.
|
---|
| 129 | /
|
---|
| 130 | / 0: Disable relative path feature and remove related functions.
|
---|
| 131 | / 1: Enable relative path feature. f_chdir() and f_chdrive() are available.
|
---|
| 132 | / 2: f_getcwd() function is available in addition to 1.
|
---|
| 133 | /
|
---|
| 134 | / Note that directory items read via f_readdir() are affected by this option. */
|
---|
| 135 |
|
---|
| 136 |
|
---|
| 137 | /*---------------------------------------------------------------------------/
|
---|
| 138 | / Drive/Volume Configurations
|
---|
| 139 | /---------------------------------------------------------------------------*/
|
---|
| 140 |
|
---|
| 141 | #define _VOLUMES 8
|
---|
| 142 | /* Number of volumes (logical drives) to be used. */
|
---|
| 143 |
|
---|
| 144 |
|
---|
| 145 | #define _STR_VOLUME_ID 0
|
---|
| 146 | #define _VOLUME_STRS "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
|
---|
| 147 | /* _STR_VOLUME_ID option switches string volume ID feature.
|
---|
| 148 | / When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
|
---|
| 149 | / number in the path name. _VOLUME_STRS defines the drive ID strings for each
|
---|
| 150 | / logical drives. Number of items must be equal to _VOLUMES. Valid characters for
|
---|
| 151 | / the drive ID strings are: A-Z and 0-9. */
|
---|
| 152 |
|
---|
| 153 |
|
---|
| 154 | #define _MULTI_PARTITION 0
|
---|
| 155 | /* This option switches multi-partition feature. By default (0), each logical drive
|
---|
| 156 | / number is bound to the same physical drive number and only an FAT volume found on
|
---|
| 157 | / the physical drive will be mounted. When multi-partition feature is enabled (1),
|
---|
| 158 | / each logical drive number is bound to arbitrary physical drive and partition
|
---|
| 159 | / listed in the VolToPart[]. Also f_fdisk() funciton will be available. */
|
---|
| 160 |
|
---|
| 161 |
|
---|
| 162 | #define _MIN_SS 512
|
---|
| 163 | #define _MAX_SS 2048
|
---|
| 164 | /* These options configure the range of sector size to be supported. (512, 1024,
|
---|
| 165 | / 2048 or 4096) Always set both 512 for most systems, all type of memory cards and
|
---|
| 166 | / harddisk. But a larger value may be required for on-board flash memory and some
|
---|
| 167 | / type of optical media. When _MAX_SS is larger than _MIN_SS, FatFs is configured
|
---|
| 168 | / to variable sector size and GET_SECTOR_SIZE command must be implemented to the
|
---|
| 169 | / disk_ioctl() function. */
|
---|
| 170 |
|
---|
| 171 |
|
---|
| 172 | #define _USE_TRIM 0
|
---|
| 173 | /* This option switches ATA-TRIM feature. (0:Disable or 1:Enable)
|
---|
| 174 | / To enable Trim feature, also CTRL_TRIM command should be implemented to the
|
---|
| 175 | / disk_ioctl() function. */
|
---|
| 176 |
|
---|
| 177 |
|
---|
| 178 | #define _FS_NOFSINFO 0
|
---|
| 179 | /* If you need to know correct free space on the FAT32 volume, set bit 0 of this
|
---|
| 180 | / option, and f_getfree() function at first time after volume mount will force
|
---|
| 181 | / a full FAT scan. Bit 1 controls the use of last allocated cluster number.
|
---|
| 182 | /
|
---|
| 183 | / bit0=0: Use free cluster count in the FSINFO if available.
|
---|
| 184 | / bit0=1: Do not trust free cluster count in the FSINFO.
|
---|
| 185 | / bit1=0: Use last allocated cluster number in the FSINFO if available.
|
---|
| 186 | / bit1=1: Do not trust last allocated cluster number in the FSINFO.
|
---|
| 187 | */
|
---|
| 188 |
|
---|
| 189 |
|
---|
| 190 |
|
---|
| 191 | /*---------------------------------------------------------------------------/
|
---|
| 192 | / System Configurations
|
---|
| 193 | /---------------------------------------------------------------------------*/
|
---|
| 194 |
|
---|
| 195 | #define _FS_TINY 1
|
---|
| 196 | /* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
|
---|
| 197 | / At the tiny configuration, size of the file object (FIL) is reduced _MAX_SS
|
---|
| 198 | / bytes. Instead of private sector buffer eliminated from the file object,
|
---|
| 199 | / common sector buffer in the file system object (FATFS) is used for the file
|
---|
| 200 | / data transfer. */
|
---|
| 201 |
|
---|
| 202 |
|
---|
| 203 | #define _FS_NORTC 0
|
---|
| 204 | #define _NORTC_MON 1
|
---|
| 205 | #define _NORTC_MDAY 1
|
---|
| 206 | #define _NORTC_YEAR 2015
|
---|
| 207 | /* The _FS_NORTC option switches timestamp feature. If the system does not have
|
---|
| 208 | / an RTC function or valid timestamp is not needed, set _FS_NORTC to 1 to disable
|
---|
| 209 | / the timestamp feature. All objects modified by FatFs will have a fixed timestamp
|
---|
| 210 | / defined by _NORTC_MON, _NORTC_MDAY and _NORTC_YEAR.
|
---|
| 211 | / When timestamp feature is enabled (_FS_NORTC == 0), get_fattime() function need
|
---|
| 212 | / to be added to the project to read current time form RTC. _NORTC_MON,
|
---|
| 213 | / _NORTC_MDAY and _NORTC_YEAR have no effect.
|
---|
| 214 | / These options have no effect at read-only configuration (_FS_READONLY == 1). */
|
---|
| 215 |
|
---|
| 216 |
|
---|
| 217 | #define _FS_LOCK 0
|
---|
| 218 | /* The _FS_LOCK option switches file lock feature to control duplicated file open
|
---|
| 219 | / and illegal operation to open objects. This option must be 0 when _FS_READONLY
|
---|
| 220 | / is 1.
|
---|
| 221 | /
|
---|
| 222 | / 0: Disable file lock feature. To avoid volume corruption, application program
|
---|
| 223 | / should avoid illegal open, remove and rename to the open objects.
|
---|
| 224 | / >0: Enable file lock feature. The value defines how many files/sub-directories
|
---|
| 225 | / can be opened simultaneously under file lock control. Note that the file
|
---|
| 226 | / lock feature is independent of re-entrancy. */
|
---|
| 227 |
|
---|
| 228 |
|
---|
| 229 | #define _FS_REENTRANT 0
|
---|
| 230 | #define _FS_TIMEOUT 1000
|
---|
| 231 | #define _SYNC_t HANDLE
|
---|
| 232 | /* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs
|
---|
| 233 | / module itself. Note that regardless of this option, file access to different
|
---|
| 234 | / volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
|
---|
| 235 | / and f_fdisk() function, are always not re-entrant. Only file/directory access
|
---|
| 236 | / to the same volume is under control of this feature.
|
---|
| 237 | /
|
---|
| 238 | / 0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
|
---|
| 239 | / 1: Enable re-entrancy. Also user provided synchronization handlers,
|
---|
| 240 | / ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
|
---|
| 241 | / function, must be added to the project. Samples are available in
|
---|
| 242 | / option/syscall.c.
|
---|
| 243 | /
|
---|
| 244 | / The _FS_TIMEOUT defines timeout period in unit of time tick.
|
---|
| 245 | / The _SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
|
---|
| 246 | / SemaphoreHandle_t and etc.. A header file for O/S definitions needs to be
|
---|
| 247 | / included somewhere in the scope of ff.c. */
|
---|
| 248 |
|
---|
| 249 |
|
---|
| 250 | #define _WORD_ACCESS 1
|
---|
| 251 | /* The _WORD_ACCESS option is an only platform dependent option. It defines
|
---|
| 252 | / which access method is used to the word data on the FAT volume.
|
---|
| 253 | /
|
---|
| 254 | / 0: Byte-by-byte access. Always compatible with all platforms.
|
---|
| 255 | / 1: Word access. Do not choose this unless under both the following conditions.
|
---|
| 256 | /
|
---|
| 257 | / * Address misaligned memory access is always allowed to ALL instructions.
|
---|
| 258 | / * Byte order on the memory is little-endian.
|
---|
| 259 | /
|
---|
| 260 | / If it is the case, _WORD_ACCESS can also be set to 1 to reduce code size.
|
---|
| 261 | / Following table shows allowable settings of some type of processors.
|
---|
| 262 | /
|
---|
| 263 | / ARM7TDMI 0 *2 ColdFire 0 *1 V850E 0 *2
|
---|
| 264 | / Cortex-M3 0 *3 Z80 0/1 V850ES 0/1
|
---|
| 265 | / Cortex-M0 0 *2 x86 0/1 TLCS-870 0/1
|
---|
| 266 | / AVR 0/1 RX600(LE) 0/1 TLCS-900 0/1
|
---|
| 267 | / AVR32 0 *1 RL78 0 *2 R32C 0 *2
|
---|
| 268 | / PIC18 0/1 SH-2 0 *1 M16C 0/1
|
---|
| 269 | / PIC24 0 *2 H8S 0 *1 MSP430 0 *2
|
---|
| 270 | / PIC32 0 *1 H8/300H 0 *1 8051 0/1
|
---|
| 271 | /
|
---|
| 272 | / *1:Big-endian.
|
---|
| 273 | / *2:Unaligned memory access is not supported.
|
---|
| 274 | / *3:Some compilers generate LDM/STM for mem_cpy function.
|
---|
| 275 | */
|
---|
| 276 |
|
---|