/* * Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved. * * Licensed under the OpenSSL license (the "License"). You may not use * this file except in compliance with the License. You can obtain a copy * in the file LICENSE in the source distribution or at * https://www.openssl.org/source/license.html */ /* ==================================================================== * Copyright 2005 Nokia. All rights reserved. * * The portions of the attached software ("Contribution") is developed by * Nokia Corporation and is licensed pursuant to the OpenSSL open source * license. * * The Contribution, originally written by Mika Kousa and Pasi Eronen of * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites * support (see RFC 4279) to OpenSSL. * * No patent licenses or other rights except those expressly stated in * the OpenSSL open source license shall be deemed granted or received * expressly, by implication, estoppel, or otherwise. * * No assurances are provided by Nokia that the Contribution does not * infringe the patent or other intellectual property rights of any third * party or that the license provides you with all the necessary rights * to make use of the Contribution. * * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR * OTHERWISE. */ #include #include #include #include #include #include #ifndef OPENSSL_NO_SOCK /* * With IPv6, it looks like Digital has mixed up the proper order of * recursive header file inclusion, resulting in the compiler complaining * that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which is * needed to have fileno() declared correctly... So let's define u_int */ #if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT) # define __U_INT typedef unsigned int u_int; #endif #define USE_SOCKETS #include "apps.h" #include #include #include #include #include #include #include #include #ifndef OPENSSL_NO_SRP # include #endif #ifndef OPENSSL_NO_CT # include #endif #include "s_apps.h" #include "timeouts.h" #if defined(__has_feature) # if __has_feature(memory_sanitizer) # include # endif #endif #undef BUFSIZZ #define BUFSIZZ 1024*8 #define S_CLIENT_IRC_READ_TIMEOUT 8 static char *prog; static int c_debug = 0; static int c_showcerts = 0; static char *keymatexportlabel = NULL; static int keymatexportlen = 20; static BIO *bio_c_out = NULL; static int c_quiet = 0; static void print_stuff(BIO *berr, SSL *con, int full); #ifndef OPENSSL_NO_OCSP static int ocsp_resp_cb(SSL *s, void *arg); #endif static int saved_errno; static void save_errno(void) { saved_errno = errno; errno = 0; } static int restore_errno(void) { int ret = errno; errno = saved_errno; return ret; } static void do_ssl_shutdown(SSL *ssl) { int ret; do { /* We only do unidirectional shutdown */ ret = SSL_shutdown(ssl); if (ret < 0) { switch (SSL_get_error(ssl, ret)) { case SSL_ERROR_WANT_READ: case SSL_ERROR_WANT_WRITE: case SSL_ERROR_WANT_ASYNC: case SSL_ERROR_WANT_ASYNC_JOB: /* We just do busy waiting. Nothing clever */ continue; } ret = 0; } } while (ret < 0); } #ifndef OPENSSL_NO_PSK /* Default PSK identity and key */ static char *psk_identity = "Client_identity"; /* * char *psk_key=NULL; by default PSK is not used */ static unsigned int psk_client_cb(SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, unsigned char *psk, unsigned int max_psk_len) { int ret; long key_len; unsigned char *key; if (c_debug) BIO_printf(bio_c_out, "psk_client_cb\n"); if (!hint) { /* no ServerKeyExchange message */ if (c_debug) BIO_printf(bio_c_out, "NULL received PSK identity hint, continuing anyway\n"); } else if (c_debug) BIO_printf(bio_c_out, "Received PSK identity hint '%s'\n", hint); /* * lookup PSK identity and PSK key based on the given identity hint here */ ret = BIO_snprintf(identity, max_identity_len, "%s", psk_identity); if (ret < 0 || (unsigned int)ret > max_identity_len) goto out_err; if (c_debug) BIO_printf(bio_c_out, "created identity '%s' len=%d\n", identity, ret); /* convert the PSK key to binary */ key = OPENSSL_hexstr2buf(psk_key, &key_len); if (key == NULL) { BIO_printf(bio_err, "Could not convert PSK key '%s' to buffer\n", psk_key); return 0; } if (key_len > max_psk_len) { BIO_printf(bio_err, "psk buffer of callback is too small (%d) for key (%ld)\n", max_psk_len, key_len); OPENSSL_free(key); return 0; } memcpy(psk, key, key_len); OPENSSL_free(key); if (c_debug) BIO_printf(bio_c_out, "created PSK len=%ld\n", key_len); return key_len; out_err: if (c_debug) BIO_printf(bio_err, "Error in PSK client callback\n"); return 0; } #endif /* This is a context that we pass to callbacks */ typedef struct tlsextctx_st { BIO *biodebug; int ack; } tlsextctx; static int ssl_servername_cb(SSL *s, int *ad, void *arg) { tlsextctx *p = (tlsextctx *) arg; const char *hn = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name); if (SSL_get_servername_type(s) != -1) p->ack = !SSL_session_reused(s) && hn != NULL; else BIO_printf(bio_err, "Can't use SSL_get_servername\n"); return SSL_TLSEXT_ERR_OK; } #ifndef OPENSSL_NO_SRP /* This is a context that we pass to all callbacks */ typedef struct srp_arg_st { char *srppassin; char *srplogin; int msg; /* copy from c_msg */ int debug; /* copy from c_debug */ int amp; /* allow more groups */ int strength; /* minimal size for N */ } SRP_ARG; # define SRP_NUMBER_ITERATIONS_FOR_PRIME 64 static int srp_Verify_N_and_g(const BIGNUM *N, const BIGNUM *g) { BN_CTX *bn_ctx = BN_CTX_new(); BIGNUM *p = BN_new(); BIGNUM *r = BN_new(); int ret = g != NULL && N != NULL && bn_ctx != NULL && BN_is_odd(N) && BN_is_prime_ex(N, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) == 1 && p != NULL && BN_rshift1(p, N) && /* p = (N-1)/2 */ BN_is_prime_ex(p, SRP_NUMBER_ITERATIONS_FOR_PRIME, bn_ctx, NULL) == 1 && r != NULL && /* verify g^((N-1)/2) == -1 (mod N) */ BN_mod_exp(r, g, p, N, bn_ctx) && BN_add_word(r, 1) && BN_cmp(r, N) == 0; BN_free(r); BN_free(p); BN_CTX_free(bn_ctx); return ret; } /*- * This callback is used here for two purposes: * - extended debugging * - making some primality tests for unknown groups * The callback is only called for a non default group. * * An application does not need the call back at all if * only the standard groups are used. In real life situations, * client and server already share well known groups, * thus there is no need to verify them. * Furthermore, in case that a server actually proposes a group that * is not one of those defined in RFC 5054, it is more appropriate * to add the group to a static list and then compare since * primality tests are rather cpu consuming. */ static int ssl_srp_verify_param_cb(SSL *s, void *arg) { SRP_ARG *srp_arg = (SRP_ARG *)arg; BIGNUM *N = NULL, *g = NULL; if (((N = SSL_get_srp_N(s)) == NULL) || ((g = SSL_get_srp_g(s)) == NULL)) return 0; if (srp_arg->debug || srp_arg->msg || srp_arg->amp == 1) { BIO_printf(bio_err, "SRP parameters:\n"); BIO_printf(bio_err, "\tN="); BN_print(bio_err, N); BIO_printf(bio_err, "\n\tg="); BN_print(bio_err, g); BIO_printf(bio_err, "\n"); } if (SRP_check_known_gN_param(g, N)) return 1; if (srp_arg->amp == 1) { if (srp_arg->debug) BIO_printf(bio_err, "SRP param N and g are not known params, going to check deeper.\n"); /* * The srp_moregroups is a real debugging feature. Implementors * should rather add the value to the known ones. The minimal size * has already been tested. */ if (BN_num_bits(g) <= BN_BITS && srp_Verify_N_and_g(N, g)) return 1; } BIO_printf(bio_err, "SRP param N and g rejected.\n"); return 0; } # define PWD_STRLEN 1024 static char *ssl_give_srp_client_pwd_cb(SSL *s, void *arg) { SRP_ARG *srp_arg = (SRP_ARG *)arg; char *pass = app_malloc(PWD_STRLEN + 1, "SRP password buffer"); PW_CB_DATA cb_tmp; int l; cb_tmp.password = (char *)srp_arg->srppassin; cb_tmp.prompt_info = "SRP user"; if ((l = password_callback(pass, PWD_STRLEN, 0, &cb_tmp)) < 0) { BIO_printf(bio_err, "Can't read Password\n"); OPENSSL_free(pass); return NULL; } *(pass + l) = '\0'; return pass; } #endif static char *srtp_profiles = NULL; #ifndef OPENSSL_NO_NEXTPROTONEG /* This the context that we pass to next_proto_cb */ typedef struct tlsextnextprotoctx_st { unsigned char *data; size_t len; int status; } tlsextnextprotoctx; static tlsextnextprotoctx next_proto; static int next_proto_cb(SSL *s, unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg) { tlsextnextprotoctx *ctx = arg; if (!c_quiet) { /* We can assume that |in| is syntactically valid. */ unsigned i; BIO_printf(bio_c_out, "Protocols advertised by server: "); for (i = 0; i < inlen;) { if (i) BIO_write(bio_c_out, ", ", 2); BIO_write(bio_c_out, &in[i + 1], in[i]); i += in[i] + 1; } BIO_write(bio_c_out, "\n", 1); } ctx->status = SSL_select_next_proto(out, outlen, in, inlen, ctx->data, ctx->len); return SSL_TLSEXT_ERR_OK; } #endif /* ndef OPENSSL_NO_NEXTPROTONEG */ static int serverinfo_cli_parse_cb(SSL *s, unsigned int ext_type, const unsigned char *in, size_t inlen, int *al, void *arg) { char pem_name[100]; unsigned char ext_buf[4 + 65536]; /* Reconstruct the type/len fields prior to extension data */ ext_buf[0] = ext_type >> 8; ext_buf[1] = ext_type & 0xFF; ext_buf[2] = inlen >> 8; ext_buf[3] = inlen & 0xFF; memcpy(ext_buf + 4, in, inlen); BIO_snprintf(pem_name, sizeof(pem_name), "SERVERINFO FOR EXTENSION %d", ext_type); PEM_write_bio(bio_c_out, pem_name, "", ext_buf, 4 + inlen); return 1; } /* * Hex decoder that tolerates optional whitespace. Returns number of bytes * produced, advances inptr to end of input string. */ static ossl_ssize_t hexdecode(const char **inptr, void *result) { unsigned char **out = (unsigned char **)result; const char *in = *inptr; unsigned char *ret = app_malloc(strlen(in) / 2, "hexdecode"); unsigned char *cp = ret; uint8_t byte; int nibble = 0; if (ret == NULL) return -1; for (byte = 0; *in; ++in) { int x; if (isspace(_UC(*in))) continue; x = OPENSSL_hexchar2int(*in); if (x < 0) { OPENSSL_free(ret); return 0; } byte |= (char)x; if ((nibble ^= 1) == 0) { *cp++ = byte; byte = 0; } else { byte <<= 4; } } if (nibble != 0) { OPENSSL_free(ret); return 0; } *inptr = in; return cp - (*out = ret); } /* * Decode unsigned 0..255, returns 1 on success, <= 0 on failure. Advances * inptr to next field skipping leading whitespace. */ static ossl_ssize_t checked_uint8(const char **inptr, void *out) { uint8_t *result = (uint8_t *)out; const char *in = *inptr; char *endp; long v; int e; save_errno(); v = strtol(in, &endp, 10); e = restore_errno(); if (((v == LONG_MIN || v == LONG_MAX) && e == ERANGE) || endp == in || !isspace(_UC(*endp)) || v != (*result = (uint8_t) v)) { return -1; } for (in = endp; isspace(_UC(*in)); ++in) continue; *inptr = in; return 1; } struct tlsa_field { void *var; const char *name; ossl_ssize_t (*parser)(const char **, void *); }; static int tlsa_import_rr(SSL *con, const char *rrdata) { /* Not necessary to re-init these values; the "parsers" do that. */ static uint8_t usage; static uint8_t selector; static uint8_t mtype; static unsigned char *data; static struct tlsa_field tlsa_fields[] = { { &usage, "usage", checked_uint8 }, { &selector, "selector", checked_uint8 }, { &mtype, "mtype", checked_uint8 }, { &data, "data", hexdecode }, { NULL, } }; struct tlsa_field *f; int ret; const char *cp = rrdata; ossl_ssize_t len = 0; for (f = tlsa_fields; f->var; ++f) { /* Returns number of bytes produced, advances cp to next field */ if ((len = f->parser(&cp, f->var)) <= 0) { BIO_printf(bio_err, "%s: warning: bad TLSA %s field in: %s\n", prog, f->name, rrdata); return 0; } } /* The data field is last, so len is its length */ ret = SSL_dane_tlsa_add(con, usage, selector, mtype, data, len); OPENSSL_free(data); if (ret == 0) { ERR_print_errors(bio_err); BIO_printf(bio_err, "%s: warning: unusable TLSA rrdata: %s\n", prog, rrdata); return 0; } if (ret < 0) { ERR_print_errors(bio_err); BIO_printf(bio_err, "%s: warning: error loading TLSA rrdata: %s\n", prog, rrdata); return 0; } return ret; } static int tlsa_import_rrset(SSL *con, STACK_OF(OPENSSL_STRING) *rrset) { int num = sk_OPENSSL_STRING_num(rrset); int count = 0; int i; for (i = 0; i < num; ++i) { char *rrdata = sk_OPENSSL_STRING_value(rrset, i); if (tlsa_import_rr(con, rrdata) > 0) ++count; } return count > 0; } typedef enum OPTION_choice { OPT_ERR = -1, OPT_EOF = 0, OPT_HELP, OPT_4, OPT_6, OPT_HOST, OPT_PORT, OPT_CONNECT, OPT_UNIX, OPT_XMPPHOST, OPT_VERIFY, OPT_CERT, OPT_CRL, OPT_CRL_DOWNLOAD, OPT_SESS_OUT, OPT_SESS_IN, OPT_CERTFORM, OPT_CRLFORM, OPT_VERIFY_RET_ERROR, OPT_VERIFY_QUIET, OPT_BRIEF, OPT_PREXIT, OPT_CRLF, OPT_QUIET, OPT_NBIO, OPT_SSL_CLIENT_ENGINE, OPT_RAND, OPT_IGN_EOF, OPT_NO_IGN_EOF, OPT_DEBUG, OPT_TLSEXTDEBUG, OPT_STATUS, OPT_WDEBUG, OPT_MSG, OPT_MSGFILE, OPT_ENGINE, OPT_TRACE, OPT_SECURITY_DEBUG, OPT_SECURITY_DEBUG_VERBOSE, OPT_SHOWCERTS, OPT_NBIO_TEST, OPT_STATE, #ifndef OPENSSL_NO_PSK OPT_PSK_IDENTITY, OPT_PSK, #endif #ifndef OPENSSL_NO_SRP OPT_SRPUSER, OPT_SRPPASS, OPT_SRP_STRENGTH, OPT_SRP_LATEUSER, OPT_SRP_MOREGROUPS, #endif OPT_SSL3, OPT_SSL_CONFIG, OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1, OPT_DTLS1_2, OPT_TIMEOUT, OPT_MTU, OPT_KEYFORM, OPT_PASS, OPT_CERT_CHAIN, OPT_CAPATH, OPT_NOCAPATH, OPT_CHAINCAPATH, OPT_VERIFYCAPATH, OPT_KEY, OPT_RECONNECT, OPT_BUILD_CHAIN, OPT_CAFILE, OPT_NOCAFILE, OPT_CHAINCAFILE, OPT_VERIFYCAFILE, OPT_NEXTPROTONEG, OPT_ALPN, OPT_SERVERINFO, OPT_STARTTLS, OPT_SERVERNAME, OPT_USE_SRTP, OPT_KEYMATEXPORT, OPT_KEYMATEXPORTLEN, OPT_SMTPHOST, OPT_ASYNC, OPT_SPLIT_SEND_FRAG, OPT_MAX_PIPELINES, OPT_READ_BUF, OPT_V_ENUM, OPT_X_ENUM, OPT_S_ENUM, OPT_FALLBACKSCSV, OPT_NOCMDS, OPT_PROXY, OPT_DANE_TLSA_DOMAIN, #ifndef OPENSSL_NO_CT OPT_CT, OPT_NOCT, OPT_CTLOG_FILE, #endif OPT_DANE_TLSA_RRDATA, OPT_DANE_EE_NO_NAME } OPTION_CHOICE; OPTIONS s_client_options[] = { {"help", OPT_HELP, '-', "Display this summary"}, {"host", OPT_HOST, 's', "Use -connect instead"}, {"port", OPT_PORT, 'p', "Use -connect instead"}, {"connect", OPT_CONNECT, 's', "TCP/IP where to connect (default is :" PORT ")"}, {"proxy", OPT_PROXY, 's', "Connect to via specified proxy to the real server"}, #ifdef AF_UNIX {"unix", OPT_UNIX, 's', "Connect over the specified Unix-domain socket"}, #endif {"4", OPT_4, '-', "Use IPv4 only"}, #ifdef AF_INET6 {"6", OPT_6, '-', "Use IPv6 only"}, #endif {"verify", OPT_VERIFY, 'p', "Turn on peer certificate verification"}, {"cert", OPT_CERT, '<', "Certificate file to use, PEM format assumed"}, {"certform", OPT_CERTFORM, 'F', "Certificate format (PEM or DER) PEM default"}, {"key", OPT_KEY, 's', "Private key file to use, if not in -cert file"}, {"keyform", OPT_KEYFORM, 'E', "Key format (PEM, DER or engine) PEM default"}, {"pass", OPT_PASS, 's', "Private key file pass phrase source"}, {"CApath", OPT_CAPATH, '/', "PEM format directory of CA's"}, {"CAfile", OPT_CAFILE, '<', "PEM format file of CA's"}, {"no-CAfile", OPT_NOCAFILE, '-', "Do not load the default certificates file"}, {"no-CApath", OPT_NOCAPATH, '-', "Do not load certificates from the default certificates directory"}, {"dane_tlsa_domain", OPT_DANE_TLSA_DOMAIN, 's', "DANE TLSA base domain"}, {"dane_tlsa_rrdata", OPT_DANE_TLSA_RRDATA, 's', "DANE TLSA rrdata presentation form"}, {"dane_ee_no_namechecks", OPT_DANE_EE_NO_NAME, '-', "Disable name checks when matching DANE-EE(3) TLSA records"}, {"reconnect", OPT_RECONNECT, '-', "Drop and re-make the connection with the same Session-ID"}, {"showcerts", OPT_SHOWCERTS, '-', "Show all certificates in the chain"}, {"debug", OPT_DEBUG, '-', "Extra output"}, {"msg", OPT_MSG, '-', "Show protocol messages"}, {"msgfile", OPT_MSGFILE, '>', "File to send output of -msg or -trace, instead of stdout"}, {"nbio_test", OPT_NBIO_TEST, '-', "More ssl protocol testing"}, {"state", OPT_STATE, '-', "Print the ssl states"}, {"crlf", OPT_CRLF, '-', "Convert LF from terminal into CRLF"}, {"quiet", OPT_QUIET, '-', "No s_client output"}, {"ign_eof", OPT_IGN_EOF, '-', "Ignore input eof (default when -quiet)"}, {"no_ign_eof", OPT_NO_IGN_EOF, '-', "Don't ignore input eof"}, {"starttls", OPT_STARTTLS, 's', "Use the appropriate STARTTLS command before starting TLS"}, {"xmpphost", OPT_XMPPHOST, 's', "Host to use with \"-starttls xmpp[-server]\""}, {"rand", OPT_RAND, 's', "Load the file(s) into the random number generator"}, {"sess_out", OPT_SESS_OUT, '>', "File to write SSL session to"}, {"sess_in", OPT_SESS_IN, '<', "File to read SSL session from"}, {"use_srtp", OPT_USE_SRTP, 's', "Offer SRTP key management with a colon-separated profile list"}, {"keymatexport", OPT_KEYMATEXPORT, 's', "Export keying material using label"}, {"keymatexportlen", OPT_KEYMATEXPORTLEN, 'p', "Export len bytes of keying material (default 20)"}, {"fallback_scsv", OPT_FALLBACKSCSV, '-', "Send the fallback SCSV"}, {"name", OPT_SMTPHOST, 's', "Hostname to use for \"-starttls smtp\""}, {"CRL", OPT_CRL, '<', "CRL file to use"}, {"crl_download", OPT_CRL_DOWNLOAD, '-', "Download CRL from distribution points"}, {"CRLform", OPT_CRLFORM, 'F', "CRL format (PEM or DER) PEM is default"}, {"verify_return_error", OPT_VERIFY_RET_ERROR, '-', "Close connection on verification error"}, {"verify_quiet", OPT_VERIFY_QUIET, '-', "Restrict verify output to errors"}, {"brief", OPT_BRIEF, '-', "Restrict output to brief summary of connection parameters"}, {"prexit", OPT_PREXIT, '-', "Print session information when the program exits"}, {"security_debug", OPT_SECURITY_DEBUG, '-', "Enable security debug messages"}, {"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-', "Output more security debug output"}, {"cert_chain", OPT_CERT_CHAIN, '<', "Certificate chain file (in PEM format)"}, {"chainCApath", OPT_CHAINCAPATH, '/', "Use dir as certificate store path to build CA certificate chain"}, {"verifyCApath", OPT_VERIFYCAPATH, '/', "Use dir as certificate store path to verify CA certificate"}, {"build_chain", OPT_BUILD_CHAIN, '-', "Build certificate chain"}, {"chainCAfile", OPT_CHAINCAFILE, '<', "CA file for certificate chain (PEM format)"}, {"verifyCAfile", OPT_VERIFYCAFILE, '<', "CA file for certificate verification (PEM format)"}, {"nocommands", OPT_NOCMDS, '-', "Do not use interactive command letters"}, {"servername", OPT_SERVERNAME, 's', "Set TLS extension servername in ClientHello"}, {"tlsextdebug", OPT_TLSEXTDEBUG, '-', "Hex dump of all TLS extensions received"}, #ifndef OPENSSL_NO_OCSP {"status", OPT_STATUS, '-', "Request certificate status from server"}, #endif {"serverinfo", OPT_SERVERINFO, 's', "types Send empty ClientHello extensions (comma-separated numbers)"}, {"alpn", OPT_ALPN, 's', "Enable ALPN extension, considering named protocols supported (comma-separated list)"}, {"async", OPT_ASYNC, '-', "Support asynchronous operation"}, {"ssl_config", OPT_SSL_CONFIG, 's', "Use specified configuration file"}, {"split_send_frag", OPT_SPLIT_SEND_FRAG, 'n', "Size used to split data for encrypt pipelines"}, {"max_pipelines", OPT_MAX_PIPELINES, 'n', "Maximum number of encrypt/decrypt pipelines to be used"}, {"read_buf", OPT_READ_BUF, 'n', "Default read buffer size to be used for connections"}, OPT_S_OPTIONS, OPT_V_OPTIONS, OPT_X_OPTIONS, #ifndef OPENSSL_NO_SSL3 {"ssl3", OPT_SSL3, '-', "Just use SSLv3"}, #endif #ifndef OPENSSL_NO_TLS1 {"tls1", OPT_TLS1, '-', "Just use TLSv1"}, #endif #ifndef OPENSSL_NO_TLS1_1 {"tls1_1", OPT_TLS1_1, '-', "Just use TLSv1.1"}, #endif #ifndef OPENSSL_NO_TLS1_2 {"tls1_2", OPT_TLS1_2, '-', "Just use TLSv1.2"}, #endif #ifndef OPENSSL_NO_DTLS {"dtls", OPT_DTLS, '-', "Use any version of DTLS"}, {"timeout", OPT_TIMEOUT, '-', "Enable send/receive timeout on DTLS connections"}, {"mtu", OPT_MTU, 'p', "Set the link layer MTU"}, #endif #ifndef OPENSSL_NO_DTLS1 {"dtls1", OPT_DTLS1, '-', "Just use DTLSv1"}, #endif #ifndef OPENSSL_NO_DTLS1_2 {"dtls1_2", OPT_DTLS1_2, '-', "Just use DTLSv1.2"}, #endif #ifndef OPENSSL_NO_SSL_TRACE {"trace", OPT_TRACE, '-', "Show trace output of protocol messages"}, #endif #ifdef WATT32 {"wdebug", OPT_WDEBUG, '-', "WATT-32 tcp debugging"}, #endif {"nbio", OPT_NBIO, '-', "Use non-blocking IO"}, #ifndef OPENSSL_NO_PSK {"psk_identity", OPT_PSK_IDENTITY, 's', "PSK identity"}, {"psk", OPT_PSK, 's', "PSK in hex (without 0x)"}, #endif #ifndef OPENSSL_NO_SRP {"srpuser", OPT_SRPUSER, 's', "SRP authentication for 'user'"}, {"srppass", OPT_SRPPASS, 's', "Password for 'user'"}, {"srp_lateuser", OPT_SRP_LATEUSER, '-', "SRP username into second ClientHello message"}, {"srp_moregroups", OPT_SRP_MOREGROUPS, '-', "Tolerate other than the known g N values."}, {"srp_strength", OPT_SRP_STRENGTH, 'p', "Minimal length in bits for N"}, #endif #ifndef OPENSSL_NO_NEXTPROTONEG {"nextprotoneg", OPT_NEXTPROTONEG, 's', "Enable NPN extension, considering named protocols supported (comma-separated list)"}, #endif #ifndef OPENSSL_NO_ENGINE {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"}, {"ssl_client_engine", OPT_SSL_CLIENT_ENGINE, 's', "Specify engine to be used for client certificate operations"}, #endif #ifndef OPENSSL_NO_CT {"ct", OPT_CT, '-', "Request and parse SCTs (also enables OCSP stapling)"}, {"noct", OPT_NOCT, '-', "Do not request or parse SCTs (default)"}, {"ctlogfile", OPT_CTLOG_FILE, '<', "CT log list CONF file"}, #endif {NULL, OPT_EOF, 0x00, NULL} }; typedef enum PROTOCOL_choice { PROTO_OFF, PROTO_SMTP, PROTO_POP3, PROTO_IMAP, PROTO_FTP, PROTO_TELNET, PROTO_XMPP, PROTO_XMPP_SERVER, PROTO_CONNECT, PROTO_IRC } PROTOCOL_CHOICE; static const OPT_PAIR services[] = { {"smtp", PROTO_SMTP}, {"pop3", PROTO_POP3}, {"imap", PROTO_IMAP}, {"ftp", PROTO_FTP}, {"xmpp", PROTO_XMPP}, {"xmpp-server", PROTO_XMPP_SERVER}, {"telnet", PROTO_TELNET}, {"irc", PROTO_IRC}, {NULL, 0} }; #define IS_INET_FLAG(o) \ (o == OPT_4 || o == OPT_6 || o == OPT_HOST || o == OPT_PORT || o == OPT_CONNECT) #define IS_UNIX_FLAG(o) (o == OPT_UNIX) #define IS_PROT_FLAG(o) \ (o == OPT_SSL3 || o == OPT_TLS1 || o == OPT_TLS1_1 || o == OPT_TLS1_2 \ || o == OPT_DTLS || o == OPT_DTLS1 || o == OPT_DTLS1_2) /* Free |*dest| and optionally set it to a copy of |source|. */ static void freeandcopy(char **dest, const char *source) { OPENSSL_free(*dest); *dest = NULL; if (source != NULL) *dest = OPENSSL_strdup(source); } int s_client_main(int argc, char **argv) { BIO *sbio; EVP_PKEY *key = NULL; SSL *con = NULL; SSL_CTX *ctx = NULL; STACK_OF(X509) *chain = NULL; X509 *cert = NULL; X509_VERIFY_PARAM *vpm = NULL; SSL_EXCERT *exc = NULL; SSL_CONF_CTX *cctx = NULL; STACK_OF(OPENSSL_STRING) *ssl_args = NULL; char *dane_tlsa_domain = NULL; STACK_OF(OPENSSL_STRING) *dane_tlsa_rrset = NULL; int dane_ee_no_name = 0; STACK_OF(X509_CRL) *crls = NULL; const SSL_METHOD *meth = TLS_client_method(); const char *CApath = NULL, *CAfile = NULL; char *cbuf = NULL, *sbuf = NULL; char *mbuf = NULL, *proxystr = NULL, *connectstr = NULL; char *cert_file = NULL, *key_file = NULL, *chain_file = NULL; char *chCApath = NULL, *chCAfile = NULL, *host = NULL; char *port = OPENSSL_strdup(PORT); char *inrand = NULL; char *passarg = NULL, *pass = NULL, *vfyCApath = NULL, *vfyCAfile = NULL; char *sess_in = NULL, *sess_out = NULL, *crl_file = NULL, *p; char *xmpphost = NULL; const char *ehlo = "mail.example.com"; struct timeval timeout, *timeoutp; fd_set readfds, writefds; int noCApath = 0, noCAfile = 0; int build_chain = 0, cbuf_len, cbuf_off, cert_format = FORMAT_PEM; int key_format = FORMAT_PEM, crlf = 0, full_log = 1, mbuf_len = 0; int prexit = 0; int sdebug = 0; int reconnect = 0, verify = SSL_VERIFY_NONE, vpmtouched = 0; int ret = 1, in_init = 1, i, nbio_test = 0, s = -1, k, width, state = 0; int sbuf_len, sbuf_off, cmdletters = 1; int socket_family = AF_UNSPEC, socket_type = SOCK_STREAM; int starttls_proto = PROTO_OFF, crl_format = FORMAT_PEM, crl_download = 0; int write_tty, read_tty, write_ssl, read_ssl, tty_on, ssl_pending; #if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) int at_eof = 0; #endif int read_buf_len = 0; int fallback_scsv = 0; long randamt = 0; OPTION_CHOICE o; #ifndef OPENSSL_NO_DTLS int enable_timeouts = 0; long socket_mtu = 0; #endif #ifndef OPENSSL_NO_ENGINE ENGINE *ssl_client_engine = NULL; #endif ENGINE *e = NULL; #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) struct timeval tv; #endif char *servername = NULL; const char *alpn_in = NULL; tlsextctx tlsextcbp = { NULL, 0 }; const char *ssl_config = NULL; #define MAX_SI_TYPES 100 unsigned short serverinfo_types[MAX_SI_TYPES]; int serverinfo_count = 0, start = 0, len; #ifndef OPENSSL_NO_NEXTPROTONEG const char *next_proto_neg_in = NULL; #endif #ifndef OPENSSL_NO_SRP char *srppass = NULL; int srp_lateuser = 0; SRP_ARG srp_arg = { NULL, NULL, 0, 0, 0, 1024 }; #endif #ifndef OPENSSL_NO_CT char *ctlog_file = NULL; int ct_validation = 0; #endif int min_version = 0, max_version = 0, prot_opt = 0, no_prot_opt = 0; int async = 0; unsigned int split_send_fragment = 0; unsigned int max_pipelines = 0; enum { use_inet, use_unix, use_unknown } connect_type = use_unknown; int count4or6 = 0; int c_nbio = 0, c_msg = 0, c_ign_eof = 0, c_brief = 0; int c_tlsextdebug = 0; #ifndef OPENSSL_NO_OCSP int c_status_req = 0; #endif BIO *bio_c_msg = NULL; FD_ZERO(&readfds); FD_ZERO(&writefds); /* Known false-positive of MemorySanitizer. */ #if defined(__has_feature) # if __has_feature(memory_sanitizer) __msan_unpoison(&readfds, sizeof(readfds)); __msan_unpoison(&writefds, sizeof(writefds)); # endif #endif prog = opt_progname(argv[0]); c_quiet = 0; c_debug = 0; c_showcerts = 0; c_nbio = 0; vpm = X509_VERIFY_PARAM_new(); cctx = SSL_CONF_CTX_new(); if (vpm == NULL || cctx == NULL) { BIO_printf(bio_err, "%s: out of memory\n", prog); goto end; } cbuf = app_malloc(BUFSIZZ, "cbuf"); sbuf = app_malloc(BUFSIZZ, "sbuf"); mbuf = app_malloc(BUFSIZZ, "mbuf"); SSL_CONF_CTX_set_flags(cctx, SSL_CONF_FLAG_CLIENT | SSL_CONF_FLAG_CMDLINE); prog = opt_init(argc, argv, s_client_options); while ((o = opt_next()) != OPT_EOF) { /* Check for intermixing flags. */ if (connect_type == use_unix && IS_INET_FLAG(o)) { BIO_printf(bio_err, "%s: Intermixed protocol flags (unix and internet domains)\n", prog); goto end; } if (connect_type == use_inet && IS_UNIX_FLAG(o)) { BIO_printf(bio_err, "%s: Intermixed protocol flags (internet and unix domains)\n", prog); goto end; } if (IS_PROT_FLAG(o) && ++prot_opt > 1) { BIO_printf(bio_err, "Cannot supply multiple protocol flags\n"); goto end; } if (IS_NO_PROT_FLAG(o)) no_prot_opt++; if (prot_opt == 1 && no_prot_opt) { BIO_printf(bio_err, "Cannot supply both a protocol flag and '-no_'\n"); goto end; } switch (o) { case OPT_EOF: case OPT_ERR: opthelp: BIO_printf(bio_err, "%s: Use -help for summary.\n", prog); goto end; case OPT_HELP: opt_help(s_client_options); ret = 0; goto end; case OPT_4: connect_type = use_inet; socket_family = AF_INET; count4or6++; break; #ifdef AF_INET6 case OPT_6: connect_type = use_inet; socket_family = AF_INET6; count4or6++; break; #endif case OPT_HOST: connect_type = use_inet; freeandcopy(&host, opt_arg()); break; case OPT_PORT: connect_type = use_inet; freeandcopy(&port, opt_arg()); break; case OPT_CONNECT: connect_type = use_inet; freeandcopy(&connectstr, opt_arg()); break; case OPT_PROXY: proxystr = opt_arg(); starttls_proto = PROTO_CONNECT; break; #ifdef AF_UNIX case OPT_UNIX: connect_type = use_unix; socket_family = AF_UNIX; freeandcopy(&host, opt_arg()); break; #endif case OPT_XMPPHOST: xmpphost = opt_arg(); break; case OPT_SMTPHOST: ehlo = opt_arg(); break; case OPT_VERIFY: verify = SSL_VERIFY_PEER; verify_args.depth = atoi(opt_arg()); if (!c_quiet) BIO_printf(bio_err, "verify depth is %d\n", verify_args.depth); break; case OPT_CERT: cert_file = opt_arg(); break; case OPT_CRL: crl_file = opt_arg(); break; case OPT_CRL_DOWNLOAD: crl_download = 1; break; case OPT_SESS_OUT: sess_out = opt_arg(); break; case OPT_SESS_IN: sess_in = opt_arg(); break; case OPT_CERTFORM: if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &cert_format)) goto opthelp; break; case OPT_CRLFORM: if (!opt_format(opt_arg(), OPT_FMT_PEMDER, &crl_format)) goto opthelp; break; case OPT_VERIFY_RET_ERROR: verify_args.return_error = 1; break; case OPT_VERIFY_QUIET: verify_args.quiet = 1; break; case OPT_BRIEF: c_brief = verify_args.quiet = c_quiet = 1; break; case OPT_S_CASES: if (ssl_args == NULL) ssl_args = sk_OPENSSL_STRING_new_null(); if (ssl_args == NULL || !sk_OPENSSL_STRING_push(ssl_args, opt_flag()) || !sk_OPENSSL_STRING_push(ssl_args, opt_arg())) { BIO_printf(bio_err, "%s: Memory allocation failure\n", prog); goto end; } break; case OPT_V_CASES: if (!opt_verify(o, vpm)) goto end; vpmtouched++; break; case OPT_X_CASES: if (!args_excert(o, &exc)) goto end; break; case OPT_PREXIT: prexit = 1; break; case OPT_CRLF: crlf = 1; break; case OPT_QUIET: c_quiet = c_ign_eof = 1; break; case OPT_NBIO: c_nbio = 1; break; case OPT_NOCMDS: cmdletters = 0; break; case OPT_ENGINE: e = setup_engine(opt_arg(), 1); break; case OPT_SSL_CLIENT_ENGINE: #ifndef OPENSSL_NO_ENGINE ssl_client_engine = ENGINE_by_id(opt_arg()); if (ssl_client_engine == NULL) { BIO_printf(bio_err, "Error getting client auth engine\n"); goto opthelp; } #endif break; case OPT_RAND: inrand = opt_arg(); break; case OPT_IGN_EOF: c_ign_eof = 1; break; case OPT_NO_IGN_EOF: c_ign_eof = 0; break; case OPT_DEBUG: c_debug = 1; break; case OPT_TLSEXTDEBUG: c_tlsextdebug = 1; break; case OPT_STATUS: #ifndef OPENSSL_NO_OCSP c_status_req = 1; #endif break; case OPT_WDEBUG: #ifdef WATT32 dbug_init(); #endif break; case OPT_MSG: c_msg = 1; break; case OPT_MSGFILE: bio_c_msg = BIO_new_file(opt_arg(), "w"); break; case OPT_TRACE: #ifndef OPENSSL_NO_SSL_TRACE c_msg = 2; #endif break; case OPT_SECURITY_DEBUG: sdebug = 1; break; case OPT_SECURITY_DEBUG_VERBOSE: sdebug = 2; break; case OPT_SHOWCERTS: c_showcerts = 1; break; case OPT_NBIO_TEST: nbio_test = 1; break; case OPT_STATE: state = 1; break; #ifndef OPENSSL_NO_PSK case OPT_PSK_IDENTITY: psk_identity = opt_arg(); break; case OPT_PSK: for (p = psk_key = opt_arg(); *p; p++) { if (isxdigit(_UC(*p))) continue; BIO_printf(bio_err, "Not a hex number '%s'\n", psk_key); goto end; } break; #endif #ifndef OPENSSL_NO_SRP case OPT_SRPUSER: srp_arg.srplogin = opt_arg(); if (min_version < TLS1_VERSION) min_version = TLS1_VERSION; break; case OPT_SRPPASS: srppass = opt_arg(); if (min_version < TLS1_VERSION) min_version = TLS1_VERSION; break; case OPT_SRP_STRENGTH: srp_arg.strength = atoi(opt_arg()); BIO_printf(bio_err, "SRP minimal length for N is %d\n", srp_arg.strength); if (min_version < TLS1_VERSION) min_version = TLS1_VERSION; break; case OPT_SRP_LATEUSER: srp_lateuser = 1; if (min_version < TLS1_VERSION) min_version = TLS1_VERSION; break; case OPT_SRP_MOREGROUPS: srp_arg.amp = 1; if (min_version < TLS1_VERSION) min_version = TLS1_VERSION; break; #endif case OPT_SSL_CONFIG: ssl_config = opt_arg(); break; case OPT_SSL3: min_version = SSL3_VERSION; max_version = SSL3_VERSION; break; case OPT_TLS1_2: min_version = TLS1_2_VERSION; max_version = TLS1_2_VERSION; break; case OPT_TLS1_1: min_version = TLS1_1_VERSION; max_version = TLS1_1_VERSION; break; case OPT_TLS1: min_version = TLS1_VERSION; max_version = TLS1_VERSION; break; case OPT_DTLS: #ifndef OPENSSL_NO_DTLS meth = DTLS_client_method(); socket_type = SOCK_DGRAM; #endif break; case OPT_DTLS1: #ifndef OPENSSL_NO_DTLS1 meth = DTLS_client_method(); min_version = DTLS1_VERSION; max_version = DTLS1_VERSION; socket_type = SOCK_DGRAM; #endif break; case OPT_DTLS1_2: #ifndef OPENSSL_NO_DTLS1_2 meth = DTLS_client_method(); min_version = DTLS1_2_VERSION; max_version = DTLS1_2_VERSION; socket_type = SOCK_DGRAM; #endif break; case OPT_TIMEOUT: #ifndef OPENSSL_NO_DTLS enable_timeouts = 1; #endif break; case OPT_MTU: #ifndef OPENSSL_NO_DTLS socket_mtu = atol(opt_arg()); #endif break; case OPT_FALLBACKSCSV: fallback_scsv = 1; break; case OPT_KEYFORM: if (!opt_format(opt_arg(), OPT_FMT_PDE, &key_format)) goto opthelp; break; case OPT_PASS: passarg = opt_arg(); break; case OPT_CERT_CHAIN: chain_file = opt_arg(); break; case OPT_KEY: key_file = opt_arg(); break; case OPT_RECONNECT: reconnect = 5; break; case OPT_CAPATH: CApath = opt_arg(); break; case OPT_NOCAPATH: noCApath = 1; break; case OPT_CHAINCAPATH: chCApath = opt_arg(); break; case OPT_VERIFYCAPATH: vfyCApath = opt_arg(); break; case OPT_BUILD_CHAIN: build_chain = 1; break; case OPT_CAFILE: CAfile = opt_arg(); break; case OPT_NOCAFILE: noCAfile = 1; break; #ifndef OPENSSL_NO_CT case OPT_NOCT: ct_validation = 0; break; case OPT_CT: ct_validation = 1; break; case OPT_CTLOG_FILE: ctlog_file = opt_arg(); break; #endif case OPT_CHAINCAFILE: chCAfile = opt_arg(); break; case OPT_VERIFYCAFILE: vfyCAfile = opt_arg(); break; case OPT_DANE_TLSA_DOMAIN: dane_tlsa_domain = opt_arg(); break; case OPT_DANE_TLSA_RRDATA: if (dane_tlsa_rrset == NULL) dane_tlsa_rrset = sk_OPENSSL_STRING_new_null(); if (dane_tlsa_rrset == NULL || !sk_OPENSSL_STRING_push(dane_tlsa_rrset, opt_arg())) { BIO_printf(bio_err, "%s: Memory allocation failure\n", prog); goto end; } break; case OPT_DANE_EE_NO_NAME: dane_ee_no_name = 1; break; case OPT_NEXTPROTONEG: #ifndef OPENSSL_NO_NEXTPROTONEG next_proto_neg_in = opt_arg(); #endif break; case OPT_ALPN: alpn_in = opt_arg(); break; case OPT_SERVERINFO: p = opt_arg(); len = strlen(p); for (start = 0, i = 0; i <= len; ++i) { if (i == len || p[i] == ',') { serverinfo_types[serverinfo_count] = atoi(p + start); if (++serverinfo_count == MAX_SI_TYPES) break; start = i + 1; } } break; case OPT_STARTTLS: if (!opt_pair(opt_arg(), services, &starttls_proto)) goto end; break; case OPT_SERVERNAME: servername = opt_arg(); break; case OPT_USE_SRTP: srtp_profiles = opt_arg(); break; case OPT_KEYMATEXPORT: keymatexportlabel = opt_arg(); break; case OPT_KEYMATEXPORTLEN: keymatexportlen = atoi(opt_arg()); break; case OPT_ASYNC: async = 1; break; case OPT_SPLIT_SEND_FRAG: split_send_fragment = atoi(opt_arg()); if (split_send_fragment == 0) { /* * Not allowed - set to a deliberately bad value so we get an * error message below */ split_send_fragment = SSL3_RT_MAX_PLAIN_LENGTH + 1; } break; case OPT_MAX_PIPELINES: max_pipelines = atoi(opt_arg()); break; case OPT_READ_BUF: read_buf_len = atoi(opt_arg()); break; } } if (count4or6 >= 2) { BIO_printf(bio_err, "%s: Can't use both -4 and -6\n", prog); goto opthelp; } argc = opt_num_rest(); if (argc != 0) goto opthelp; if (proxystr) { int res; char *tmp_host = host, *tmp_port = port; if (connectstr == NULL) { BIO_printf(bio_err, "%s: -proxy requires use of -connect\n", prog); goto opthelp; } res = BIO_parse_hostserv(proxystr, &host, &port, BIO_PARSE_PRIO_HOST); if (tmp_host != host) OPENSSL_free(tmp_host); if (tmp_port != port) OPENSSL_free(tmp_port); if (!res) { BIO_printf(bio_err, "%s: -proxy argument malformed or ambiguous\n", prog); goto end; } } else { int res = 1; char *tmp_host = host, *tmp_port = port; if (connectstr != NULL) res = BIO_parse_hostserv(connectstr, &host, &port, BIO_PARSE_PRIO_HOST); if (tmp_host != host) OPENSSL_free(tmp_host); if (tmp_port != port) OPENSSL_free(tmp_port); if (!res) { BIO_printf(bio_err, "%s: -connect argument malformed or ambiguous\n", prog); goto end; } } if (socket_family == AF_UNIX && socket_type != SOCK_STREAM) { BIO_printf(bio_err, "Can't use unix sockets and datagrams together\n"); goto end; } if (split_send_fragment > SSL3_RT_MAX_PLAIN_LENGTH) { BIO_printf(bio_err, "Bad split send fragment size\n"); goto end; } if (max_pipelines > SSL_MAX_PIPELINES) { BIO_printf(bio_err, "Bad max pipelines value\n"); goto end; } #if !defined(OPENSSL_NO_NEXTPROTONEG) next_proto.status = -1; if (next_proto_neg_in) { next_proto.data = next_protos_parse(&next_proto.len, next_proto_neg_in); if (next_proto.data == NULL) { BIO_printf(bio_err, "Error parsing -nextprotoneg argument\n"); goto end; } } else next_proto.data = NULL; #endif if (!app_passwd(passarg, NULL, &pass, NULL)) { BIO_printf(bio_err, "Error getting password\n"); goto end; } if (key_file == NULL) key_file = cert_file; if (key_file) { key = load_key(key_file, key_format, 0, pass, e, "client certificate private key file"); if (key == NULL) { ERR_print_errors(bio_err); goto end; } } if (cert_file) { cert = load_cert(cert_file, cert_format, "client certificate file"); if (cert == NULL) { ERR_print_errors(bio_err); goto end; } } if (chain_file) { if (!load_certs(chain_file, &chain, FORMAT_PEM, NULL, "client certificate chain")) goto end; } if (crl_file) { X509_CRL *crl; crl = load_crl(crl_file, crl_format); if (crl == NULL) { BIO_puts(bio_err, "Error loading CRL\n"); ERR_print_errors(bio_err); goto end; } crls = sk_X509_CRL_new_null(); if (crls == NULL || !sk_X509_CRL_push(crls, crl)) { BIO_puts(bio_err, "Error adding CRL\n"); ERR_print_errors(bio_err); X509_CRL_free(crl); goto end; } } if (!load_excert(&exc)) goto end; if (!app_RAND_load_file(NULL, 1) && inrand == NULL && !RAND_status()) { BIO_printf(bio_err, "warning, not much extra random data, consider using the -rand option\n"); } if (inrand != NULL) { randamt = app_RAND_load_files(inrand); BIO_printf(bio_err, "%ld semi-random bytes loaded\n", randamt); } if (bio_c_out == NULL) { if (c_quiet && !c_debug) { bio_c_out = BIO_new(BIO_s_null()); if (c_msg && !bio_c_msg) bio_c_msg = dup_bio_out(FORMAT_TEXT); } else if (bio_c_out == NULL) bio_c_out = dup_bio_out(FORMAT_TEXT); } #ifndef OPENSSL_NO_SRP if (!app_passwd(srppass, NULL, &srp_arg.srppassin, NULL)) { BIO_printf(bio_err, "Error getting password\n"); goto end; } #endif ctx = SSL_CTX_new(meth); if (ctx == NULL) { ERR_print_errors(bio_err); goto end; } if (sdebug) ssl_ctx_security_debug(ctx, sdebug); if (ssl_config) { if (SSL_CTX_config(ctx, ssl_config) == 0) { BIO_printf(bio_err, "Error using configuration \"%s\"\n", ssl_config); ERR_print_errors(bio_err); goto end; } } if (SSL_CTX_set_min_proto_version(ctx, min_version) == 0) goto end; if (SSL_CTX_set_max_proto_version(ctx, max_version) == 0) goto end; if (vpmtouched && !SSL_CTX_set1_param(ctx, vpm)) { BIO_printf(bio_err, "Error setting verify params\n"); ERR_print_errors(bio_err); goto end; } if (async) { SSL_CTX_set_mode(ctx, SSL_MODE_ASYNC); } if (split_send_fragment > 0) { SSL_CTX_set_split_send_fragment(ctx, split_send_fragment); } if (max_pipelines > 0) { SSL_CTX_set_max_pipelines(ctx, max_pipelines); } if (read_buf_len > 0) { SSL_CTX_set_default_read_buffer_len(ctx, read_buf_len); } if (!config_ctx(cctx, ssl_args, ctx)) goto end; if (!ssl_load_stores(ctx, vfyCApath, vfyCAfile, chCApath, chCAfile, crls, crl_download)) { BIO_printf(bio_err, "Error loading store locations\n"); ERR_print_errors(bio_err); goto end; } #ifndef OPENSSL_NO_ENGINE if (ssl_client_engine) { if (!SSL_CTX_set_client_cert_engine(ctx, ssl_client_engine)) { BIO_puts(bio_err, "Error setting client auth engine\n"); ERR_print_errors(bio_err); ENGINE_free(ssl_client_engine); goto end; } ENGINE_free(ssl_client_engine); } #endif #ifndef OPENSSL_NO_PSK if (psk_key != NULL) { if (c_debug) BIO_printf(bio_c_out, "PSK key given, setting client callback\n"); SSL_CTX_set_psk_client_callback(ctx, psk_client_cb); } #endif #ifndef OPENSSL_NO_SRTP if (srtp_profiles != NULL) { /* Returns 0 on success! */ if (SSL_CTX_set_tlsext_use_srtp(ctx, srtp_profiles) != 0) { BIO_printf(bio_err, "Error setting SRTP profile\n"); ERR_print_errors(bio_err); goto end; } } #endif if (exc) ssl_ctx_set_excert(ctx, exc); #if !defined(OPENSSL_NO_NEXTPROTONEG) if (next_proto.data) SSL_CTX_set_next_proto_select_cb(ctx, next_proto_cb, &next_proto); #endif if (alpn_in) { size_t alpn_len; unsigned char *alpn = next_protos_parse(&alpn_len, alpn_in); if (alpn == NULL) { BIO_printf(bio_err, "Error parsing -alpn argument\n"); goto end; } /* Returns 0 on success! */ if (SSL_CTX_set_alpn_protos(ctx, alpn, alpn_len) != 0) { BIO_printf(bio_err, "Error setting ALPN\n"); goto end; } OPENSSL_free(alpn); } for (i = 0; i < serverinfo_count; i++) { if (!SSL_CTX_add_client_custom_ext(ctx, serverinfo_types[i], NULL, NULL, NULL, serverinfo_cli_parse_cb, NULL)) { BIO_printf(bio_err, "Warning: Unable to add custom extension %u, skipping\n", serverinfo_types[i]); } } if (state) SSL_CTX_set_info_callback(ctx, apps_ssl_info_callback); #ifndef OPENSSL_NO_CT /* Enable SCT processing, without early connection termination */ if (ct_validation && !SSL_CTX_enable_ct(ctx, SSL_CT_VALIDATION_PERMISSIVE)) { ERR_print_errors(bio_err); goto end; } if (!ctx_set_ctlog_list_file(ctx, ctlog_file)) { if (ct_validation) { ERR_print_errors(bio_err); goto end; } /* * If CT validation is not enabled, the log list isn't needed so don't * show errors or abort. We try to load it regardless because then we * can show the names of the logs any SCTs came from (SCTs may be seen * even with validation disabled). */ ERR_clear_error(); } #endif SSL_CTX_set_verify(ctx, verify, verify_callback); if (!ctx_set_verify_locations(ctx, CAfile, CApath, noCAfile, noCApath)) { ERR_print_errors(bio_err); goto end; } ssl_ctx_add_crls(ctx, crls, crl_download); if (!set_cert_key_stuff(ctx, cert, key, chain, build_chain)) goto end; if (servername != NULL) { tlsextcbp.biodebug = bio_err; SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb); SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp); } # ifndef OPENSSL_NO_SRP if (srp_arg.srplogin) { if (!srp_lateuser && !SSL_CTX_set_srp_username(ctx, srp_arg.srplogin)) { BIO_printf(bio_err, "Unable to set SRP username\n"); goto end; } srp_arg.msg = c_msg; srp_arg.debug = c_debug; SSL_CTX_set_srp_cb_arg(ctx, &srp_arg); SSL_CTX_set_srp_client_pwd_callback(ctx, ssl_give_srp_client_pwd_cb); SSL_CTX_set_srp_strength(ctx, srp_arg.strength); if (c_msg || c_debug || srp_arg.amp == 0) SSL_CTX_set_srp_verify_param_callback(ctx, ssl_srp_verify_param_cb); } # endif if (dane_tlsa_domain != NULL) { if (SSL_CTX_dane_enable(ctx) <= 0) { BIO_printf(bio_err, "%s: Error enabling DANE TLSA authentication.\n", prog); ERR_print_errors(bio_err); goto end; } } con = SSL_new(ctx); if (sess_in) { SSL_SESSION *sess; BIO *stmp = BIO_new_file(sess_in, "r"); if (!stmp) { BIO_printf(bio_err, "Can't open session file %s\n", sess_in); ERR_print_errors(bio_err); goto end; } sess = PEM_read_bio_SSL_SESSION(stmp, NULL, 0, NULL); BIO_free(stmp); if (!sess) { BIO_printf(bio_err, "Can't open session file %s\n", sess_in); ERR_print_errors(bio_err); goto end; } if (!SSL_set_session(con, sess)) { BIO_printf(bio_err, "Can't set session\n"); ERR_print_errors(bio_err); goto end; } SSL_SESSION_free(sess); } if (fallback_scsv) SSL_set_mode(con, SSL_MODE_SEND_FALLBACK_SCSV); if (servername != NULL) { if (!SSL_set_tlsext_host_name(con, servername)) { BIO_printf(bio_err, "Unable to set TLS servername extension.\n"); ERR_print_errors(bio_err); goto end; } } if (dane_tlsa_domain != NULL) { if (SSL_dane_enable(con, dane_tlsa_domain) <= 0) { BIO_printf(bio_err, "%s: Error enabling DANE TLSA " "authentication.\n", prog); ERR_print_errors(bio_err); goto end; } if (dane_tlsa_rrset == NULL) { BIO_printf(bio_err, "%s: DANE TLSA authentication requires at " "least one -dane_tlsa_rrdata option.\n", prog); goto end; } if (tlsa_import_rrset(con, dane_tlsa_rrset) <= 0) { BIO_printf(bio_err, "%s: Failed to import any TLSA " "records.\n", prog); goto end; } if (dane_ee_no_name) SSL_dane_set_flags(con, DANE_FLAG_NO_DANE_EE_NAMECHECKS); } else if (dane_tlsa_rrset != NULL) { BIO_printf(bio_err, "%s: DANE TLSA authentication requires the " "-dane_tlsa_domain option.\n", prog); goto end; } re_start: if (init_client(&s, host, port, socket_family, socket_type) == 0) { BIO_printf(bio_err, "connect:errno=%d\n", get_last_socket_error()); BIO_closesocket(s); goto end; } BIO_printf(bio_c_out, "CONNECTED(%08X)\n", s); if (c_nbio) { if (!BIO_socket_nbio(s, 1)) { ERR_print_errors(bio_err); goto end; } BIO_printf(bio_c_out, "Turned on non blocking io\n"); } #ifndef OPENSSL_NO_DTLS if (socket_type == SOCK_DGRAM) { union BIO_sock_info_u peer_info; sbio = BIO_new_dgram(s, BIO_NOCLOSE); if ((peer_info.addr = BIO_ADDR_new()) == NULL) { BIO_printf(bio_err, "memory allocation failure\n"); BIO_closesocket(s); goto end; } if (!BIO_sock_info(s, BIO_SOCK_INFO_ADDRESS, &peer_info)) { BIO_printf(bio_err, "getsockname:errno=%d\n", get_last_socket_error()); BIO_ADDR_free(peer_info.addr); BIO_closesocket(s); goto end; } (void)BIO_ctrl_set_connected(sbio, peer_info.addr); BIO_ADDR_free(peer_info.addr); peer_info.addr = NULL; if (enable_timeouts) { timeout.tv_sec = 0; timeout.tv_usec = DGRAM_RCV_TIMEOUT; BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout); timeout.tv_sec = 0; timeout.tv_usec = DGRAM_SND_TIMEOUT; BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout); } if (socket_mtu) { if (socket_mtu < DTLS_get_link_min_mtu(con)) { BIO_printf(bio_err, "MTU too small. Must be at least %ld\n", DTLS_get_link_min_mtu(con)); BIO_free(sbio); goto shut; } SSL_set_options(con, SSL_OP_NO_QUERY_MTU); if (!DTLS_set_link_mtu(con, socket_mtu)) { BIO_printf(bio_err, "Failed to set MTU\n"); BIO_free(sbio); goto shut; } } else /* want to do MTU discovery */ BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL); } else #endif /* OPENSSL_NO_DTLS */ sbio = BIO_new_socket(s, BIO_NOCLOSE); if (nbio_test) { BIO *test; test = BIO_new(BIO_f_nbio_test()); sbio = BIO_push(test, sbio); } if (c_debug) { BIO_set_callback(sbio, bio_dump_callback); BIO_set_callback_arg(sbio, (char *)bio_c_out); } if (c_msg) { #ifndef OPENSSL_NO_SSL_TRACE if (c_msg == 2) SSL_set_msg_callback(con, SSL_trace); else #endif SSL_set_msg_callback(con, msg_cb); SSL_set_msg_callback_arg(con, bio_c_msg ? bio_c_msg : bio_c_out); } if (c_tlsextdebug) { SSL_set_tlsext_debug_callback(con, tlsext_cb); SSL_set_tlsext_debug_arg(con, bio_c_out); } #ifndef OPENSSL_NO_OCSP if (c_status_req) { SSL_set_tlsext_status_type(con, TLSEXT_STATUSTYPE_ocsp); SSL_CTX_set_tlsext_status_cb(ctx, ocsp_resp_cb); SSL_CTX_set_tlsext_status_arg(ctx, bio_c_out); } #endif SSL_set_bio(con, sbio, sbio); SSL_set_connect_state(con); /* ok, lets connect */ if (fileno_stdin() > SSL_get_fd(con)) width = fileno_stdin() + 1; else width = SSL_get_fd(con) + 1; read_tty = 1; write_tty = 0; tty_on = 0; read_ssl = 1; write_ssl = 1; cbuf_len = 0; cbuf_off = 0; sbuf_len = 0; sbuf_off = 0; switch ((PROTOCOL_CHOICE) starttls_proto) { case PROTO_OFF: break; case PROTO_SMTP: { /* * This is an ugly hack that does a lot of assumptions. We do * have to handle multi-line responses which may come in a single * packet or not. We therefore have to use BIO_gets() which does * need a buffering BIO. So during the initial chitchat we do * push a buffering BIO into the chain that is removed again * later on to not disturb the rest of the s_client operation. */ int foundit = 0; BIO *fbio = BIO_new(BIO_f_buffer()); BIO_push(fbio, sbio); /* wait for multi-line response to end from SMTP */ do { mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ); } while (mbuf_len > 3 && mbuf[3] == '-'); BIO_printf(fbio, "EHLO %s\r\n", ehlo); (void)BIO_flush(fbio); /* wait for multi-line response to end EHLO SMTP response */ do { mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ); if (strstr(mbuf, "STARTTLS")) foundit = 1; } while (mbuf_len > 3 && mbuf[3] == '-'); (void)BIO_flush(fbio); BIO_pop(fbio); BIO_free(fbio); if (!foundit) BIO_printf(bio_err, "didn't find starttls in server response," " trying anyway...\n"); BIO_printf(sbio, "STARTTLS\r\n"); BIO_read(sbio, sbuf, BUFSIZZ); } break; case PROTO_POP3: { BIO_read(sbio, mbuf, BUFSIZZ); BIO_printf(sbio, "STLS\r\n"); mbuf_len = BIO_read(sbio, sbuf, BUFSIZZ); if (mbuf_len < 0) { BIO_printf(bio_err, "BIO_read failed\n"); goto end; } } break; case PROTO_IMAP: { int foundit = 0; BIO *fbio = BIO_new(BIO_f_buffer()); BIO_push(fbio, sbio); BIO_gets(fbio, mbuf, BUFSIZZ); /* STARTTLS command requires CAPABILITY... */ BIO_printf(fbio, ". CAPABILITY\r\n"); (void)BIO_flush(fbio); /* wait for multi-line CAPABILITY response */ do { mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ); if (strstr(mbuf, "STARTTLS")) foundit = 1; } while (mbuf_len > 3 && mbuf[0] != '.'); (void)BIO_flush(fbio); BIO_pop(fbio); BIO_free(fbio); if (!foundit) BIO_printf(bio_err, "didn't find STARTTLS in server response," " trying anyway...\n"); BIO_printf(sbio, ". STARTTLS\r\n"); BIO_read(sbio, sbuf, BUFSIZZ); } break; case PROTO_FTP: { BIO *fbio = BIO_new(BIO_f_buffer()); BIO_push(fbio, sbio); /* wait for multi-line response to end from FTP */ do { mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ); } while (mbuf_len > 3 && mbuf[3] == '-'); (void)BIO_flush(fbio); BIO_pop(fbio); BIO_free(fbio); BIO_printf(sbio, "AUTH TLS\r\n"); BIO_read(sbio, sbuf, BUFSIZZ); } break; case PROTO_XMPP: case PROTO_XMPP_SERVER: { int seen = 0; BIO_printf(sbio, "", starttls_proto == PROTO_XMPP ? "client" : "server", xmpphost ? xmpphost : host); seen = BIO_read(sbio, mbuf, BUFSIZZ); mbuf[seen] = 0; while (!strstr (mbuf, ""); seen = BIO_read(sbio, sbuf, BUFSIZZ); sbuf[seen] = 0; if (!strstr(sbuf, " 2); } (void)BIO_flush(fbio); BIO_pop(fbio); BIO_free(fbio); if (foundit != success) { goto shut; } } break; case PROTO_IRC: { int numeric; BIO *fbio = BIO_new(BIO_f_buffer()); BIO_push(fbio, sbio); BIO_printf(fbio, "STARTTLS\r\n"); (void)BIO_flush(fbio); width = SSL_get_fd(con) + 1; do { numeric = 0; FD_ZERO(&readfds); openssl_fdset(SSL_get_fd(con), &readfds); timeout.tv_sec = S_CLIENT_IRC_READ_TIMEOUT; timeout.tv_usec = 0; /* * If the IRCd doesn't respond within * S_CLIENT_IRC_READ_TIMEOUT seconds, assume * it doesn't support STARTTLS. Many IRCds * will not give _any_ sort of response to a * STARTTLS command when it's not supported. */ if (!BIO_get_buffer_num_lines(fbio) && !BIO_pending(fbio) && !BIO_pending(sbio) && select(width, (void *)&readfds, NULL, NULL, &timeout) < 1) { BIO_printf(bio_err, "Timeout waiting for response (%d seconds).\n", S_CLIENT_IRC_READ_TIMEOUT); break; } mbuf_len = BIO_gets(fbio, mbuf, BUFSIZZ); if (mbuf_len < 1 || sscanf(mbuf, "%*s %d", &numeric) != 1) break; /* :example.net 451 STARTTLS :You have not registered */ /* :example.net 421 STARTTLS :Unknown command */ if ((numeric == 451 || numeric == 421) && strstr(mbuf, "STARTTLS") != NULL) { BIO_printf(bio_err, "STARTTLS not supported: %s", mbuf); break; } if (numeric == 691) { BIO_printf(bio_err, "STARTTLS negotiation failed: "); ERR_print_errors(bio_err); break; } } while (numeric != 670); (void)BIO_flush(fbio); BIO_pop(fbio); BIO_free(fbio); if (numeric != 670) { BIO_printf(bio_err, "Server does not support STARTTLS.\n"); ret = 1; goto shut; } } } for (;;) { FD_ZERO(&readfds); FD_ZERO(&writefds); if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_get_timeout(con, &timeout)) timeoutp = &timeout; else timeoutp = NULL; if (SSL_in_init(con) && !SSL_total_renegotiations(con)) { in_init = 1; tty_on = 0; } else { tty_on = 1; if (in_init) { in_init = 0; if (servername != NULL && !SSL_session_reused(con)) { BIO_printf(bio_c_out, "Server did %sacknowledge servername extension.\n", tlsextcbp.ack ? "" : "not "); } if (sess_out) { BIO *stmp = BIO_new_file(sess_out, "w"); if (stmp) { PEM_write_bio_SSL_SESSION(stmp, SSL_get_session(con)); BIO_free(stmp); } else BIO_printf(bio_err, "Error writing session file %s\n", sess_out); } if (c_brief) { BIO_puts(bio_err, "CONNECTION ESTABLISHED\n"); print_ssl_summary(con); } print_stuff(bio_c_out, con, full_log); if (full_log > 0) full_log--; if (starttls_proto) { BIO_write(bio_err, mbuf, mbuf_len); /* We don't need to know any more */ if (!reconnect) starttls_proto = PROTO_OFF; } if (reconnect) { reconnect--; BIO_printf(bio_c_out, "drop connection and then reconnect\n"); do_ssl_shutdown(con); SSL_set_connect_state(con); BIO_closesocket(SSL_get_fd(con)); goto re_start; } } } ssl_pending = read_ssl && SSL_has_pending(con); if (!ssl_pending) { #if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) if (tty_on) { /* * Note that select() returns when read _would not block_, * and EOF satisfies that. To avoid a CPU-hogging loop, * set the flag so we exit. */ if (read_tty && !at_eof) openssl_fdset(fileno_stdin(), &readfds); #if !defined(OPENSSL_SYS_VMS) if (write_tty) openssl_fdset(fileno_stdout(), &writefds); #endif } if (read_ssl) openssl_fdset(SSL_get_fd(con), &readfds); if (write_ssl) openssl_fdset(SSL_get_fd(con), &writefds); #else if (!tty_on || !write_tty) { if (read_ssl) openssl_fdset(SSL_get_fd(con), &readfds); if (write_ssl) openssl_fdset(SSL_get_fd(con), &writefds); } #endif /* * Note: under VMS with SOCKETSHR the second parameter is * currently of type (int *) whereas under other systems it is * (void *) if you don't have a cast it will choke the compiler: * if you do have a cast then you can either go for (int *) or * (void *). */ #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) /* * Under Windows/DOS we make the assumption that we can always * write to the tty: therefore if we need to write to the tty we * just fall through. Otherwise we timeout the select every * second and see if there are any keypresses. Note: this is a * hack, in a proper Windows application we wouldn't do this. */ i = 0; if (!write_tty) { if (read_tty) { tv.tv_sec = 1; tv.tv_usec = 0; i = select(width, (void *)&readfds, (void *)&writefds, NULL, &tv); if (!i && (!has_stdin_waiting() || !read_tty)) continue; } else i = select(width, (void *)&readfds, (void *)&writefds, NULL, timeoutp); } #else i = select(width, (void *)&readfds, (void *)&writefds, NULL, timeoutp); #endif if (i < 0) { BIO_printf(bio_err, "bad select %d\n", get_last_socket_error()); goto shut; /* goto end; */ } } if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0) { BIO_printf(bio_err, "TIMEOUT occurred\n"); } if (!ssl_pending && FD_ISSET(SSL_get_fd(con), &writefds)) { k = SSL_write(con, &(cbuf[cbuf_off]), (unsigned int)cbuf_len); switch (SSL_get_error(con, k)) { case SSL_ERROR_NONE: cbuf_off += k; cbuf_len -= k; if (k <= 0) goto end; /* we have done a write(con,NULL,0); */ if (cbuf_len <= 0) { read_tty = 1; write_ssl = 0; } else { /* if (cbuf_len > 0) */ read_tty = 0; write_ssl = 1; } break; case SSL_ERROR_WANT_WRITE: BIO_printf(bio_c_out, "write W BLOCK\n"); write_ssl = 1; read_tty = 0; break; case SSL_ERROR_WANT_ASYNC: BIO_printf(bio_c_out, "write A BLOCK\n"); wait_for_async(con); write_ssl = 1; read_tty = 0; break; case SSL_ERROR_WANT_READ: BIO_printf(bio_c_out, "write R BLOCK\n"); write_tty = 0; read_ssl = 1; write_ssl = 0; break; case SSL_ERROR_WANT_X509_LOOKUP: BIO_printf(bio_c_out, "write X BLOCK\n"); break; case SSL_ERROR_ZERO_RETURN: if (cbuf_len != 0) { BIO_printf(bio_c_out, "shutdown\n"); ret = 0; goto shut; } else { read_tty = 1; write_ssl = 0; break; } case SSL_ERROR_SYSCALL: if ((k != 0) || (cbuf_len != 0)) { BIO_printf(bio_err, "write:errno=%d\n", get_last_socket_error()); goto shut; } else { read_tty = 1; write_ssl = 0; } break; case SSL_ERROR_WANT_ASYNC_JOB: /* This shouldn't ever happen in s_client - treat as an error */ case SSL_ERROR_SSL: ERR_print_errors(bio_err); goto shut; } } #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_VMS) /* Assume Windows/DOS/BeOS can always write */ else if (!ssl_pending && write_tty) #else else if (!ssl_pending && FD_ISSET(fileno_stdout(), &writefds)) #endif { #ifdef CHARSET_EBCDIC ascii2ebcdic(&(sbuf[sbuf_off]), &(sbuf[sbuf_off]), sbuf_len); #endif i = raw_write_stdout(&(sbuf[sbuf_off]), sbuf_len); if (i <= 0) { BIO_printf(bio_c_out, "DONE\n"); ret = 0; goto shut; /* goto end; */ } sbuf_len -= i;; sbuf_off += i; if (sbuf_len <= 0) { read_ssl = 1; write_tty = 0; } } else if (ssl_pending || FD_ISSET(SSL_get_fd(con), &readfds)) { #ifdef RENEG { static int iiii; if (++iiii == 52) { SSL_renegotiate(con); iiii = 0; } } #endif k = SSL_read(con, sbuf, 1024 /* BUFSIZZ */ ); switch (SSL_get_error(con, k)) { case SSL_ERROR_NONE: if (k <= 0) goto end; sbuf_off = 0; sbuf_len = k; read_ssl = 0; write_tty = 1; break; case SSL_ERROR_WANT_ASYNC: BIO_printf(bio_c_out, "read A BLOCK\n"); wait_for_async(con); write_tty = 0; read_ssl = 1; if ((read_tty == 0) && (write_ssl == 0)) write_ssl = 1; break; case SSL_ERROR_WANT_WRITE: BIO_printf(bio_c_out, "read W BLOCK\n"); write_ssl = 1; read_tty = 0; break; case SSL_ERROR_WANT_READ: BIO_printf(bio_c_out, "read R BLOCK\n"); write_tty = 0; read_ssl = 1; if ((read_tty == 0) && (write_ssl == 0)) write_ssl = 1; break; case SSL_ERROR_WANT_X509_LOOKUP: BIO_printf(bio_c_out, "read X BLOCK\n"); break; case SSL_ERROR_SYSCALL: ret = get_last_socket_error(); if (c_brief) BIO_puts(bio_err, "CONNECTION CLOSED BY SERVER\n"); else BIO_printf(bio_err, "read:errno=%d\n", ret); goto shut; case SSL_ERROR_ZERO_RETURN: BIO_printf(bio_c_out, "closed\n"); ret = 0; goto shut; case SSL_ERROR_WANT_ASYNC_JOB: /* This shouldn't ever happen in s_client. Treat as an error */ case SSL_ERROR_SSL: ERR_print_errors(bio_err); goto shut; /* break; */ } } /* OPENSSL_SYS_MSDOS includes OPENSSL_SYS_WINDOWS */ #if defined(OPENSSL_SYS_MSDOS) else if (has_stdin_waiting()) #else else if (FD_ISSET(fileno_stdin(), &readfds)) #endif { if (crlf) { int j, lf_num; i = raw_read_stdin(cbuf, BUFSIZZ / 2); lf_num = 0; /* both loops are skipped when i <= 0 */ for (j = 0; j < i; j++) if (cbuf[j] == '\n') lf_num++; for (j = i - 1; j >= 0; j--) { cbuf[j + lf_num] = cbuf[j]; if (cbuf[j] == '\n') { lf_num--; i++; cbuf[j + lf_num] = '\r'; } } assert(lf_num == 0); } else i = raw_read_stdin(cbuf, BUFSIZZ); #if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) if (i == 0) at_eof = 1; #endif if ((!c_ign_eof) && ((i <= 0) || (cbuf[0] == 'Q' && cmdletters))) { BIO_printf(bio_err, "DONE\n"); ret = 0; goto shut; } if ((!c_ign_eof) && (cbuf[0] == 'R' && cmdletters)) { BIO_printf(bio_err, "RENEGOTIATING\n"); SSL_renegotiate(con); cbuf_len = 0; } #ifndef OPENSSL_NO_HEARTBEATS else if ((!c_ign_eof) && (cbuf[0] == 'B' && cmdletters)) { BIO_printf(bio_err, "HEARTBEATING\n"); SSL_heartbeat(con); cbuf_len = 0; } #endif else { cbuf_len = i; cbuf_off = 0; #ifdef CHARSET_EBCDIC ebcdic2ascii(cbuf, cbuf, i); #endif } write_ssl = 1; read_tty = 0; } } ret = 0; shut: if (in_init) print_stuff(bio_c_out, con, full_log); do_ssl_shutdown(con); #if defined(OPENSSL_SYS_WINDOWS) /* * Give the socket time to send its last data before we close it. * No amount of setting SO_LINGER etc on the socket seems to persuade * Windows to send the data before closing the socket...but sleeping * for a short time seems to do it (units in ms) * TODO: Find a better way to do this */ Sleep(50); #endif BIO_closesocket(SSL_get_fd(con)); end: if (con != NULL) { if (prexit != 0) print_stuff(bio_c_out, con, 1); SSL_free(con); } #if !defined(OPENSSL_NO_NEXTPROTONEG) OPENSSL_free(next_proto.data); #endif SSL_CTX_free(ctx); X509_free(cert); sk_X509_CRL_pop_free(crls, X509_CRL_free); EVP_PKEY_free(key); sk_X509_pop_free(chain, X509_free); OPENSSL_free(pass); #ifndef OPENSSL_NO_SRP OPENSSL_free(srp_arg.srppassin); #endif OPENSSL_free(connectstr); OPENSSL_free(host); OPENSSL_free(port); X509_VERIFY_PARAM_free(vpm); ssl_excert_free(exc); sk_OPENSSL_STRING_free(ssl_args); sk_OPENSSL_STRING_free(dane_tlsa_rrset); SSL_CONF_CTX_free(cctx); OPENSSL_clear_free(cbuf, BUFSIZZ); OPENSSL_clear_free(sbuf, BUFSIZZ); OPENSSL_clear_free(mbuf, BUFSIZZ); release_engine(e); BIO_free(bio_c_out); bio_c_out = NULL; BIO_free(bio_c_msg); bio_c_msg = NULL; return (ret); } static void print_stuff(BIO *bio, SSL *s, int full) { X509 *peer = NULL; char buf[BUFSIZ]; STACK_OF(X509) *sk; STACK_OF(X509_NAME) *sk2; const SSL_CIPHER *c; X509_NAME *xn; int i; #ifndef OPENSSL_NO_COMP const COMP_METHOD *comp, *expansion; #endif unsigned char *exportedkeymat; #ifndef OPENSSL_NO_CT const SSL_CTX *ctx = SSL_get_SSL_CTX(s); #endif if (full) { int got_a_chain = 0; sk = SSL_get_peer_cert_chain(s); if (sk != NULL) { got_a_chain = 1; BIO_printf(bio, "---\nCertificate chain\n"); for (i = 0; i < sk_X509_num(sk); i++) { X509_NAME_oneline(X509_get_subject_name(sk_X509_value(sk, i)), buf, sizeof buf); BIO_printf(bio, "%2d s:%s\n", i, buf); X509_NAME_oneline(X509_get_issuer_name(sk_X509_value(sk, i)), buf, sizeof buf); BIO_printf(bio, " i:%s\n", buf); if (c_showcerts) PEM_write_bio_X509(bio, sk_X509_value(sk, i)); } } BIO_printf(bio, "---\n"); peer = SSL_get_peer_certificate(s); if (peer != NULL) { BIO_printf(bio, "Server certificate\n"); /* Redundant if we showed the whole chain */ if (!(c_showcerts && got_a_chain)) PEM_write_bio_X509(bio, peer); X509_NAME_oneline(X509_get_subject_name(peer), buf, sizeof buf); BIO_printf(bio, "subject=%s\n", buf); X509_NAME_oneline(X509_get_issuer_name(peer), buf, sizeof buf); BIO_printf(bio, "issuer=%s\n", buf); } else BIO_printf(bio, "no peer certificate available\n"); sk2 = SSL_get_client_CA_list(s); if ((sk2 != NULL) && (sk_X509_NAME_num(sk2) > 0)) { BIO_printf(bio, "---\nAcceptable client certificate CA names\n"); for (i = 0; i < sk_X509_NAME_num(sk2); i++) { xn = sk_X509_NAME_value(sk2, i); X509_NAME_oneline(xn, buf, sizeof(buf)); BIO_write(bio, buf, strlen(buf)); BIO_write(bio, "\n", 1); } } else { BIO_printf(bio, "---\nNo client certificate CA names sent\n"); } ssl_print_sigalgs(bio, s); ssl_print_tmp_key(bio, s); #ifndef OPENSSL_NO_CT /* * When the SSL session is anonymous, or resumed via an abbreviated * handshake, no SCTs are provided as part of the handshake. While in * a resumed session SCTs may be present in the session's certificate, * no callbacks are invoked to revalidate these, and in any case that * set of SCTs may be incomplete. Thus it makes little sense to * attempt to display SCTs from a resumed session's certificate, and of * course none are associated with an anonymous peer. */ if (peer != NULL && !SSL_session_reused(s) && SSL_ct_is_enabled(s)) { const STACK_OF(SCT) *scts = SSL_get0_peer_scts(s); int sct_count = scts != NULL ? sk_SCT_num(scts) : 0; BIO_printf(bio, "---\nSCTs present (%i)\n", sct_count); if (sct_count > 0) { const CTLOG_STORE *log_store = SSL_CTX_get0_ctlog_store(ctx); BIO_printf(bio, "---\n"); for (i = 0; i < sct_count; ++i) { SCT *sct = sk_SCT_value(scts, i); BIO_printf(bio, "SCT validation status: %s\n", SCT_validation_status_string(sct)); SCT_print(sct, bio, 0, log_store); if (i < sct_count - 1) BIO_printf(bio, "\n---\n"); } BIO_printf(bio, "\n"); } } #endif BIO_printf(bio, "---\nSSL handshake has read %" PRIu64 " bytes and written %" PRIu64 " bytes\n", BIO_number_read(SSL_get_rbio(s)), BIO_number_written(SSL_get_wbio(s))); } print_verify_detail(s, bio); BIO_printf(bio, (SSL_session_reused(s) ? "---\nReused, " : "---\nNew, ")); c = SSL_get_current_cipher(s); BIO_printf(bio, "%s, Cipher is %s\n", SSL_CIPHER_get_version(c), SSL_CIPHER_get_name(c)); if (peer != NULL) { EVP_PKEY *pktmp; pktmp = X509_get0_pubkey(peer); BIO_printf(bio, "Server public key is %d bit\n", EVP_PKEY_bits(pktmp)); } BIO_printf(bio, "Secure Renegotiation IS%s supported\n", SSL_get_secure_renegotiation_support(s) ? "" : " NOT"); #ifndef OPENSSL_NO_COMP comp = SSL_get_current_compression(s); expansion = SSL_get_current_expansion(s); BIO_printf(bio, "Compression: %s\n", comp ? SSL_COMP_get_name(comp) : "NONE"); BIO_printf(bio, "Expansion: %s\n", expansion ? SSL_COMP_get_name(expansion) : "NONE"); #endif #ifdef SSL_DEBUG { /* Print out local port of connection: useful for debugging */ int sock; union BIO_sock_info_u info; sock = SSL_get_fd(s); if ((info.addr = BIO_ADDR_new()) != NULL && BIO_sock_info(sock, BIO_SOCK_INFO_ADDRESS, &info)) { BIO_printf(bio_c_out, "LOCAL PORT is %u\n", ntohs(BIO_ADDR_rawport(info.addr))); } BIO_ADDR_free(info.addr); } #endif #if !defined(OPENSSL_NO_NEXTPROTONEG) if (next_proto.status != -1) { const unsigned char *proto; unsigned int proto_len; SSL_get0_next_proto_negotiated(s, &proto, &proto_len); BIO_printf(bio, "Next protocol: (%d) ", next_proto.status); BIO_write(bio, proto, proto_len); BIO_write(bio, "\n", 1); } #endif { const unsigned char *proto; unsigned int proto_len; SSL_get0_alpn_selected(s, &proto, &proto_len); if (proto_len > 0) { BIO_printf(bio, "ALPN protocol: "); BIO_write(bio, proto, proto_len); BIO_write(bio, "\n", 1); } else BIO_printf(bio, "No ALPN negotiated\n"); } #ifndef OPENSSL_NO_SRTP { SRTP_PROTECTION_PROFILE *srtp_profile = SSL_get_selected_srtp_profile(s); if (srtp_profile) BIO_printf(bio, "SRTP Extension negotiated, profile=%s\n", srtp_profile->name); } #endif SSL_SESSION_print(bio, SSL_get_session(s)); if (SSL_get_session(s) != NULL && keymatexportlabel != NULL) { BIO_printf(bio, "Keying material exporter:\n"); BIO_printf(bio, " Label: '%s'\n", keymatexportlabel); BIO_printf(bio, " Length: %i bytes\n", keymatexportlen); exportedkeymat = app_malloc(keymatexportlen, "export key"); if (!SSL_export_keying_material(s, exportedkeymat, keymatexportlen, keymatexportlabel, strlen(keymatexportlabel), NULL, 0, 0)) { BIO_printf(bio, " Error\n"); } else { BIO_printf(bio, " Keying material: "); for (i = 0; i < keymatexportlen; i++) BIO_printf(bio, "%02X", exportedkeymat[i]); BIO_printf(bio, "\n"); } OPENSSL_free(exportedkeymat); } BIO_printf(bio, "---\n"); X509_free(peer); /* flush, or debugging output gets mixed with http response */ (void)BIO_flush(bio); } # ifndef OPENSSL_NO_OCSP static int ocsp_resp_cb(SSL *s, void *arg) { const unsigned char *p; int len; OCSP_RESPONSE *rsp; len = SSL_get_tlsext_status_ocsp_resp(s, &p); BIO_puts(arg, "OCSP response: "); if (!p) { BIO_puts(arg, "no response sent\n"); return 1; } rsp = d2i_OCSP_RESPONSE(NULL, &p, len); if (!rsp) { BIO_puts(arg, "response parse error\n"); BIO_dump_indent(arg, (char *)p, len, 4); return 0; } BIO_puts(arg, "\n======================================\n"); OCSP_RESPONSE_print(arg, rsp, 0); BIO_puts(arg, "======================================\n"); OCSP_RESPONSE_free(rsp); return 1; } # endif #endif /* OPENSSL_NO_SOCK */